Speed of ipad2 slowed down after updating to ios8

I Updated my ipad2 to iOS 8, but it processing speed slowed down. How to I rectify this issue?

Hi, IsmailFarid.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

Similar Messages

Why has my ipad2 slowed down after 8.0.2 ?

MMy iPad2 slowed to a crawl after installing 8.0.2. Everything takes seconds to load, emails open slowly, etc

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Mac Mini 2011 slow down after updating to Yosemite

Hi all!
After updating my Mac Mini (half 2011) from Mavericks to Yosemite, it became extremely slow and unresponsive. I have to wait a lot of time for apps to open and commands, like clicking a button, to be executed executed. File Vault, that I read is a common cause of slow down, is NOT enabled.
What should I do? In these cases, for my Windows PC, I insert the OS DVD and format: what's the equivalent operation for a Mac?
Thank you in advance for your help!

K1kk0z90 wrote:
What should I do?
Buy more RAM - a lot more.

RT target slows down after updating with a shared variable

I am using a shared variable that is defined in the RT target (cFP-2110) to transfer data from the host PC. The shared variable is a cluster of scaling parameters that needs to be stored in the RT target. The host PC is only connected temporarily for system setup and calibration.
There is only one instance of the shared variable in both the host PC vi and the target vi. The shared variable in the host is located in an event case that is activated when there is a value change. Everything works great until I make a value change in the shared variable. The target vi promptly slows from 30mSec to about 500 mSec and stays that way. The only way I can get the RT target to run full speed again is to recycle power or reset it.
What am I doing wrong?
Temporarily slowing down the RT target when the shared variable is updated is not a problem for this application. The problem is that I have to restart the target to get it running at full speed again.
I’m using Win-XP, LV 8.5.1 and FieldPoint 6.0.1
Thanks,
Dave J.

Hi Mark,
The host is sending the shared variable via an event case. When the event is activated, the data is sent to the target and it functions as expected, except that it slows down to a crawl. I have to restart the target to get it working up to speed again. The are no error codes.
The shared variable is a cluster of several items and it is attached.
In the mean time to promote the project, I split up the cluster into smaller clusters to use several shared variables and now I do not have a slow down problem. In other words, it works great. As an experiment I have sent the several small clusters at one time and I get the slow-down problem again.
I've come to the conclusion that large single cluster (which is attached) is too much to send at one time.
Please advise if there is something else to learn or understand.
Thanks,
Dave J.
Attachments:
Host Data In.ctl ‏33 KB

Everything is slowed down after upgrading to ios8 ?

I have various problems after upgrading to IOS8 with mij Ipad2. Pages has for example become very slow. I can say that it has in fact become unusable: I get typing errors caused by the slowness.
Another complaint is that the keyboard all the time covers the text.
Further I am using Icloud drive for Pages, but I want to change that. When I change this in the system, then I lose all my documents! ( but if I close WIFI then I keep the documents: I donot understand).
I would like to know if Apple reads these posts? And is there a simple possibilty to downgrade ?

As Skydiver119 has reinforced,
Apple provides NO means or provision to downgrade iDevices to a previously installed iOS version.
There are unsupported methods to do so, but these involves doing things to your Apple iDevice that is NOT permitted by Apple and Apple has taken steps to make sure there are consequences, like making your iPad completely inoperable, by using unauthorized, unsupported and unofficial means to circumvent the normal,default operation of their mobile devices.
To use these methods to try and fix your Apple iDevice means, Apple is going to punish you for doing so, by making sure your iDevice no longer functions.

Massive slow down after update

Hi, I have Nokia n95-1 and my problem is that today I've updated my firmware from 30.0.015 to 31.0.017 and encountered massive slowdown of phone. If I press menu button I must wait 20sec, others option works even slower. I have newest pcsuite, updater and drivers. My phone is unusable now as I can even see how particular parts of UI are drawn on screen. Any suggestions?
Solved!
Go to Solution.

Try to find in this directory. Assuming that you are using Windows XP
C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A
Once you find this directory, delete all the files in it & close Windows Explorer. Connect your phone and run NSU. The standard GUI will appear to update your software but this time, NSU will re-download your firmware from NSU servers.
I suspected that the firmware that you first downloaded got some CRC or any errors during downloading and even after you re-flashed for second or third times, NSU still using the 'corrupted' firmware that you previously downloaded in that directory.
Do remember to backup all your data/contacts before updating the firmware....
V31.0.015
07 Nov 2008
RM-320 - 0555181

I-Phone 3G slowed down after updating to OS 4.0.1

My I-phone 3G was running perfectly fine, till I updated to OS 4, it's been slower than the slowest, and even turns itself off at anytime, during browsing and even during calls. I updated to 4.0.1 only to improve things a little bit. Still the problems persist.
Even with the 4.0.1 update, it runs very slow compared to OS 3 and it's update. Apple needs to fix this. it still reboots itself at anytime, and internet is also very very slow. Am cursing myself why I updated it.

Similar problems to all the other posts. Slow response. Some apps time out before they can load. Reset helps some but doesn't last and doesn't improve everything. Noticed that some apps that have upgraded since 4.0 was released seem to run faster after they are updated on the phone. cases on point most recently are RunKeeper and GolfShot, but thought i was seeing better performance on some others too.
Steve Jobs seems to be "over the hill" with his dismal denial that there are any problems with OS4. Who can trust him now? Sad that those of us with contracts to run for another year on 3G phones get ignored by apple while it "fixes" the battery indicator! Big deal on that fix - it did nothing to improve connectivity to ATT network, just shows how poor the connection really is now instead of making us think it was better with the old software!

System slow down after upgrade to 10.10.2

Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-C

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".

I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.

SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

Compleat system slow down after current updates

Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GS

First of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while.

System slow down after lion update 8/18/11

Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?

Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers!

On iMovie for iPad2, is it possible to speed up and slow down voices?

On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

It it possible to speed up or slow down music from my iTunes file?
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen)
cut
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
blend
open GB's help and search for "curve"
I am using music from my iTunes.
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Slow down after installing Lion OS

My Macbook pro later than 2009 model slowed down after installing the new OS Lion
any suggestions to speed it up

First suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
http://www.apple.com/support/macbookpro
What you do not need is some gizmo to "speed up" or clean caches etc.
Maybe you need to make more room on your hard drive, or add more RAM.
For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
http://www.apple.com/support/lion

Speed up and slow down tracks

I need a program that I can speed up and slow down tracks with. Is that possible in Logic Express? I know that it can be done in Logic Pro, however I don't need quite that much program.

xcuse me if i jump in here without answering the original question, but that brings up something similar to me:
if i have a setup in the arrange with a combination of various audio-files, apple loops and midi-tracks, and i want to record something additional into that (midi over connected edirol midi-keyboard): can i slow down the whole song, just to make it easier to record the new part without destructively destroying anything?
and after that just go back to the original song-tempo?
thanx a bunch for any thoughts!
again, sorry balletboy for jumpin in here, hope that is ok for you :o)

Speed of ipad2 slowed down after updating to ios8

Similar Messages

Maybe you are looking for