Speed Step Setting under XP - when I am NON running on batteries

Under XPPRO
Why does the CPU speed (System Properties, General Tab) measure this:
T7600 @ 2.33Ghz, 977 MHz, 2.98 GB of RAM.
Except during load it changes to:
T7600 @ 2.33Ghz, 2.33 MHz, 2.98 GB of RAM.
* During load = running photoshop and makeing the cpu work
Can the speed step be disabled during non-battery mode..... (the 4 sony SZ vaio's that I also bought can.. same CPU core 2 duo) ...)
I would rather have the cpu run slower only when running on battery..
Thank you
MacBook Pro 2.33 3 gigs ram   Mac OS X (10.4.8)   boot camp

Aha - thanks a bunch (I assume you've very accurately pointed me to the BIOS setting "Timer Wake with Battery Operation") ; the fact that the factory setting is "disabled" (not really clear to me why this is the case with the flash disk in the x300; a spinning disk I could have understood, but would then maybe have expected an option or a hint in the Lenovo tools within Windows for first-time Lenovo users like myself) and/or the warnings associated with changing it must have made me not try changing that of all things.
Also, I DID of course search the forums first, but found nothing specific enough - my bad.

Similar Messages

  • I have Firefox 3.6.14, when I start up it says windows resolution of 1366x768 is set under 1024x768, why?

    Mozilla 5 Firefox 3.6.14 opens and a screen appears:
    "There seems to be a screen resolution problem.
    Your screen resolution is set below our minimum recommendation. When it's set under 1024 x 768 pixels, the all-new Yahoo! Mail won't look as good."
    I check the screen resolution and it is 1366x768. I think you have a bug!
    bwagner

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    What are the dimensions of the Firefox window?
    You can try;
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone.  When you delete the account you will be given the option to either keep or delete the iCloud data from your phone.  This also, only deletes the account and the iCloud data from your phone, not from iCloud.  Your husband's phone won't be effected by this.  Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
    If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account. 
    If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls.  To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID.  Then do the same thing in Settings>FaceTime.

  • Speed Stepping Issue - bad  performance on MBP 2.4

    Hi,
    My MBP 2.4 with 4 GB of Ram running 10.4.11 never really ran as fast as it should. My macbook 2.0 continuously performed better when running audio apps such as Logic 7 & 8 as well as Ableton Live. I was having many audio drop outs and error messages, while watching the CPU meter in both programs continually go through the roof. Checking Activity monitor showed no abnormal signs. My local Apple store has said there is nothing wrong with my computer.It seems crazy, when even my 4 year old G5 performs better and achieves more tracks.
    Then I found this thread (http://www.ableton.com/forum/viewtopic.php?p=610592#610592) at the Ableton Live forum and used Coolbook to monitor my Speed Stepping and sure enough I found my problem. When the CPU is under a lot of stress from programs it doesn't step-up in speed. I'm noticing my CPU jumping between 1200mHz - 1800mHz but very rarely reaching it's potential of 2400mHz. So I registered Coolbook and have set a few steps and sure enough it's working very well. I'm getting the performance I've always hoped for. Running the Live 7 performance test, it's scoring on par with Windows laptops with the same chip and a significantly better score than running it without Coolbook.
    Running XP under Bootcamp works very well with Ableton Live showing simlar results to OSX with Coolbook suggesting this speed stepping problem is OSX.
    There are many people with this problem on many audio forums ... I don't want to resort to a 3rd party app to get the performance my machine should give me out of the box. Is there anybody out there with the Santa Rosa chip that isn't seeing this problem?

    I too am having major issues with my 2.2Ghz Macbook pro.. as is my friend who has the exact same set up as I do.
    Ableton hits 50% CPU load then goes crazy and starts stuttering and popping when it hits a heavy CPU load spike for a fraction of a second, obviously caused by the speed stepping problem. It's not helping. The fact that running the same software in bootcamp under windows removes this isssue, is very poor form.
    PLEASE Apple, can you work with the guys at Ableton to sort this issue out. Can you PLEASE release a patch for Macbook Pro Santa Rosa owners so that we can disable the speed stepping while specific applications are open, or completely.
    We know for a fact that the CPU cycles down to around 800Mhz with speed stepping.... and then it has to ramp back up to 2200Mhz for heavy CPU load times... unfortunately it's just not doing it quickly enough.. and causing Ableton to splutter and stutter and cough it's way through our tracks that we are producing!
    PLEASE HELP! I know you can!
    Scott

  • After BIOS update Intel Speed Step not working on Satellite A500

    I upgraded my Satellite A500 PSAM3E model to the newest BIOS 1.50, now the Intel speed step not working!
    My CPU is always 2GHz+, I chagned Power Plan to balanced, but no change... with previous the CPU was around 800 MHz.
    When I try to change Windows 7 power management and set maximum CPU performance to 50 or 80% the system freezes.

    Hey Szaby59,
    Which older BIOS version did you use before update to 1.50?
    I also use the maximum CPU performance option for Eco mode (50%) but this does work properly.
    Furthermore it would be interesting to know if you use factory settings or your own Windows installation. Normally after using Toshiba recovery disk you dont have to install any Toshiba tools anymore. Everything is preinstalled on your notebook.

  • MSI 975X PUE Speed Stepping

    I have had the speed stepping function disabled since I got the board, but today i enabled it because I wanted to see how it works.
    But so far, I haven't seen the CPU slow down.
    I have a TV tuner card, and when it is running, the CPU load is between 2 - 5%, but apart from that, all programs are idle. Could it really be because of the TV tunder card, that Speed Stepping doesn't activate?
    I'm running 302 FSB, does that change anything?

    Phew, I'm back. I flashed the BIOS successfully - thank you very much for your advice, and the bat file for the BIOS update worked perfectly - thanks for making that available.
    I thought it had gone wrong for a while, because after using the BIOS reset switch with the new (OLD) BIOS, and I pushed the power button, it only turned on briefly, and then turned off again... - luckily it was just a cold boot, but it sure made me nervous for a little while 
    Right now, the board runs on default settings, but the C1E function is available in the BIOS, and I have selected Enabled because I would like to see how it works.
    Maybe I'll see if the board OCs better, but not until tomorrow.. - I think it's time to go to bed 
    Thanks a lot for the help and advice 
    EDIT: One final question. This is most likely a very dumb question, but I'm very unfamiliar with the C1E setting.. - how does the CPU handle all the sudden changes in divider and frequency? Is it bad for the CPU, or is it ok?
    One nice thing though, is that the idle temps are even better than before (which I guess is the purpose of the C1E setting)...

  • Session State is set to null when tab (from List) is clicked

    Hi Gurus, et al,
    Database: 10g Rel 2
    APEX: 4.1.2
    My application uses a tabbed navigation list to tab through different sections of the form. Each tab issues a doSubmit('tabname');. My application also uses Page 0 for regions that are common to several forms. When I tab through the form (called requisition), the session state for the page items is set to null while the page 0 remains intact. It seems like the doSubmit sets the page items to null. How can I prevent this from happening?
    Also, it still happens on APEX 4.2.1 because I put the application on APEX.ORACLE.COM:
    Workspace: RGWORK
    Application: CSRSR (Application 60220)
    Page: 8
    Username: tester
    Password: test123
    Please follow these steps for this issue to occur
    1. Run application 60220
    2. Select the only choice on the menu (Creative Services Design Requisition (PA 0879))
    3. List of Outstanding Requisitions is displayed
    4. Click the edit icon next to the requisition Project Description is 'zazaza'
    5. Change Date Needed to 3/31/2013
    6. Click on the Project Type tab
    7. All items are null for that tab (project type in the database = 'frame:dec')
    Robert
    http://apexjscss.blogspot.com

    Denes,
    While I appreciate your professional opinion, the issue still remains. I may not have the described the issue clearly. It seems that while the row is initially fetched (source type is only when null), project type and purpose items are not displayed initially with the infomation from the table when the appropriate tab is clicked. For example, while the row contains 'frame:dec' for project type, those checkboxes are checked on on the screen.
    The form is "complex" for the following reasons:
    1. Uses a wizard for new requisitions
    2. Uses tabs for updates
    3. Uses a Modal page to display outstanding requisitions for the user before the form is displayed
    4. Uses common regions (on page 0) with other pages (3 pages uses project information, delivery, requesting department, and chargecode regions.
    5. Authorized approvers popup list are populated
    6. Manual tabular form is used for framing information including collections
    I tried to uses application processes, application computations, package procedures and functions whenever possible.
    SOMEONE, PLEASE HELP!
    Robert
    http://apexjscss.blogspot.com

  • Value Set  error msg when opening sales order Form

    Hi
    I created a value Set(where the values are populated at run time based on a view) which is attached to DFF (column eg Attribute13),The Value set would get value populated only if any sales order lines are cancelled, as the value of Attribute13 on cancelled line would be inserted to new Order Line.
    The Problem is when ever the Sales order Form is opened it throws the error message
    "Value XX For the FlexField Segment dosent not exists in the valueset (Valueset name)" as the oe_order_lines_all.attribute13 has value and the value set has null, it matches it and throw the above error.
    Could you guys give any suggestion how to avoid it, or is there any workarould , Thanks
    Thanks

    This tells me that the same attribute is used for something else and there is a value in that the column that is not your table which you are validating against. Or the value you are setting is not in that table.
    About the context: If the same attribute is used under a different context AND if that context gets set when you open the sales order AND if the validation type is different under that context for attribute13, you will get this error.
    Thanks
    Nagamohan

  • How to set workflow status when workflow manually cancelled?

    Hi All,
    When i manually cancelled designer workflow, then status comes as 'cancelled'. Instead i need to set different status. How to  achieve this? 
    Thanks in advance!

    You can use this action
    Set Workflow Status
    This action is initially displayed in a workflow step as Set workflow status to Canceled. Use this action to set the status of the workflow. The default options are Canceled, Approved, and Rejected.
    You can enter a new status value in the dropdown in the action. Once you enter a status value, the entry is automatically added to the dropdown list. For example, you can enter a status that is more user-friendly and informative than Completed or Canceled,
    such as Expense Report Approved.
     NOTES 
    You cannot rename or delete a status value once it has been created. However, you do not have to use it.
    A custom status is applicable to the current workflow only, and cannot be used in another workflow.
    A workflow cannot use custom status values that you define in the action if the action is used inside an impersonation step.
    If the Set Workflow Status action is the last step in your workflow where you have also used a custom value, you can see your custom value in the Status column in
    the list upon workflow pausing or completion.
    Following is an example of what the action might look like in a workflow step,
    Set workflow status to Specification status: Ready for Design Review
    http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-actions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376961.aspx
    Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
    INSQLSERVER.COM
    Mohammad Nizamuddin

  • Does anyone know the magic steps to Remind Me When I Leave Home?

    Does anyone know the magic steps to Remind Me When I Leave Home?
    I cannot get the Reminders for Location to work. Is this due to Apple's braindead maps?

    electronicsguy wrote: what do you not get exactly? you need to set the options in reminder with geolocation and have the gps on. it will then setup a geo-fence with the non-filled arrow icon in the status bar. do you do all this and it still doesnt work?
    My maps has a blue dot that moves with me (along through the houses rather than the road), so I am sure GPS is "working"
    Geo-fence? Status bar arrow? what are you talking about?
    I set a reminder for when I leave my home address, and the reminder never happens. I think this is because Apple thinks my home address is somewhere else, and I am not "in it" to begin with, so can't leave it. Duhhhhh...
    I never had a problem with iOS5 and Google-maps-data, so it must be the Apple braindamaged maps.
    I used to work for Nokia maps in a joint venture, and maps are VERY hard to do well. Apple arrogance there, I suspect.

  • Error : Input Definition 'Ground WIP' does not have a % Step set.

    Input Definition 'Ground WIP' does not have a % Step set.
    Why are we getting this error when the % Step has a percentage set? It will not allow us to save the spec.
    Material
    Qty
    Material G/L
    Moisture G/L
    Solids G/L
    Yld
    % Step
    EXT Cost
    Ground WIP
    Internal
    1.00
    1000.00
    100.00
    1000.00000 lb 1.00000 1.00000 1.00000 1000.00000 lb 100.00 --
    Total
    1000.00000 lb
    1000.00000 lb

    the user copied a formulation spec and entered a wip , then tried to save. it's like it wasn't recognizing the 100%. We didn't change tabs and try that, they endedup writing a new spec to get around it. We are not modifying and inputs programatically.
    Another issue we saw this morning:
    1, create a marinade in step 1
    2 consume an FO in step 2
    3 click consume from step - receive unhandled error
    we found that if we put a percentage in on the FO un step 2 before clicking consume from step , it works fine. Can you guys cast a warning or error message instead of the unhandled?
    thanks,
    David
    The description for Event ID '0' in Source 'Prodika' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'ErrorType: First| ErrorCount: 0| App: GSM| SessionId: 800f067b-7860-6de0-517f-ac4ac13c0f69| UserId: johnsong| IsNewSession: False| ServerID: 10.31.11.20| Misc: Spec 5329214-001 ; Uncooked ; EditMode| Exception: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Xeno.Prodika.GSMLib.BOMCalc.BomCalcNormalizeException: All inputs have a % Step of 0.0. at Xeno.Prodika.GSMLib.BOMCalc.Utils.InputsCalculationValidationsHelper.ValidateInputWithNonZeroPercentStepExists(IEnumerable`1 inputs, IList`1 errors) at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.Validate() at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.CalculateInputs() at Xeno.Prodika.GSMLib.BOMCalc.StepCalcMethods.InputDrivenStepCalcMethod.CalculateStep() at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculatorBase.CalculateStep(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculator.CalculateStepAndRelatedSteps(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStep initialStep, List`1 calculatedSteps, GetCalculator getCalculator) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStepAdminable initialStep) at Xeno.Web.UI.GSMExtensions.BomCalc.BomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedInputBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedPercentBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.EditModeOnlyBomCalcEventsDecorator.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.FormulationUIEvents.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.ctlInput.btnConsumeFromStep_OnClick(Object sender, EventArgs e) at System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.baseforms_frmformulation_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)'

  • The post-expression for the step 'Set Station Global Models' could not be evaluated.

    When running a TestStand sequence, I get the following error message:
    The post-expression for the step 'Set Station Global Models' could not be evaluated.
    Variable or property types do not match or are not compatible.
    Error Code:  -17321; Variable or property types do not match or are not compatible.
    Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
    I'll explain the scenario.  The code is developped in TS4.1.0, although that should be irrelevant.
    I inherited a TestStand project which calls LabVIEW modules.  The original sequence works fine on the test pc (which is remotely located).  The local and remote PC's share the same StationGlobals.ini.
    Here is why it is strange..  I do get the error message on the local PC whether I use the old or the new code.  I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't. 
    When I run the old code on the remote PC, I do not get that message, but I do get it with the new code.  I don't recall modifying code that affected the StationGlobals.  My goal is to fix it on both machines (at least the remote one).
    This is the expression that it does not like:
    StationGlobals.Models=Locals.Models,
    However, that very same expression exists in the original code.  The one thing that did change is the addition of a new model number in the Locals.Models.newNumber.  I suspect that this contributes to the error.  But why does it give me an error when I run the original sequence locally?  Maybe I should try running it again..
    In either case, any suggestions to overcome the error?
    Thanks.
    RayR
    Solved!
    Go to Solution.

    Please ignore post.
    I found the problem..  There was a mismatch with the number of models.  Easy fix.  It's all good.
    For someone else who might tumble onto this thread for the same reason, here's an explanation.
    I added a new model with its variants to the list of Locals.Models.  In total, there were 16 additions to the list.
    I also added these to the StationGlobals.  Which meant that my StationGlobals no longer matched the one on the remote PC. 
    Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals. 
    Slight oversight in the sea of models that are listed (I'm not even going to count them).  Now fixed. 
    ... and embarrassed ...
    I may as well give myself an "Accepted Solution".
    Spoiler (Highlight to read)
    Since I've been naughty all year it will be my only Christmas gift..
    Since I've been naughty all year it will be my only Christmas gift..

  • Setting encoding/charset when invoking a Partner Link

    Hi,
    I'm having a problem with setting the encodign when calling a partner link from a BPEL-process. Default charset seems to be utf-8, but I need to set the encoding to iso-8859-1. I've tried using the contentType-property under partnerLinkBinding, but with no success. Any ideas?

    I also got a similar error when i tried to use WSIF binding in BPEL. My BPEL process invokes a WSIF webservice and gets the result. The error i got is below,
    <2008-02-13 08:30:17,538> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Exception not handled by the Collaxa Cube system.
    An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.lang.NullPointerException
         at com.collaxa.cube.ws.wsdl.WSDLUtils.getServiceByPortTypeQn(WSDLUtils.java:303)
         at com.collaxa.cube.ws.wsdl.WSDLUtils.getServiceByPortTypeQn(WSDLUtils.java:314)
         at com.collaxa.cube.ws.wsdl.WSDLUtils.getServiceByPortTypeQn(WSDLUtils.java:277)
         at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:355)
         at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:222)
         at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:736)
         at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:371)
         at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
         at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3271)
         at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1697)

  • Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

    Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • My I-cloud says I have no devices set up even when i'm logged in to my apple , how do I fix this problem? Please respond quickly, I lost my ipod and even when I try to place it in lost mode it still won't recognize that I have a device. What do I do?

    My I-cloud says I have no devices set up even when i'm logged in to my apple ID account, how do I fix this problem? Please respond quickly, I lost my I-pod and even when I try to place it in lost mode it still won't recognize that I have a device. What do I do?

    If you did not set up find my iPhone on the iPod, you can't find it.

Maybe you are looking for