Speed up connection

I have a Novell Netware 4.11 server thats has 1024 MB of Ram and a 2.8 gHZ
Processor, w/ 2 10/100 Network cards w/ Load Balancing on.
Now how can I get the connection between a client and the server to
transfer files faster than 500 kB/Sec.
I have a 10/100 mB Network with win98-SE workstation haveing the same cards
as the server.
I want to move files between the client and the server at/or near the
speeds rated on the cards for when it comes time for backups.
Any help will be great.

We have 3 IDE Drives
Connecting using Ip and IPX
Latest client versions
we are using switchs SMC 10/100
> We need more information about your configuration:
>
> Do you have IDE drives or SCSI drives in the server? Are the drives
mirrored?
>
> Are you using a switch? What brand/model?
>
> Are you connecting via IP or IPX?
>
> What version of the Client?
>
> Have you looked at the client configuration tips at
> http://www.otcnetworks.com/nwclient.htm
>
> How did you test the performance?
>
> If your network is configured correctly, you should be able to get about
> 8MB/s out of it. Here are some tools that are useful for testing the
> performance. It includes info on similar networks that you can use as a
> reference point.
> http://www.otcnetworks.com/hdtest.htm
>
> > I have a Novell Netware 4.11 server thats has 1024 MB of Ram and a 2.8 gHZ
> > Processor, w/ 2 10/100 Network cards w/ Load Balancing on.
> >
> > Now how can I get the connection between a client and the server to
> > transfer files faster than 500 kB/Sec.
> >
> > I have a 10/100 mB Network with win98-SE workstation haveing the same cards
> > as the server.
> >
> > I want to move files between the client and the server at/or near the
> > speeds rated on the cards for when it comes time for backups.
> >
> > Any help will be great.
>

Similar Messages

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install?

I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install on my 24" Imac?

As long as you use your Apple ID to purchase it, I don't see why they wouldn't let you download the installer on one of their Macs and put it on a pocket drive.
Or, a friend with a high speed connection?
I agree with you about the delivery method, just trying to help you get what you want.

What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

what is the best way to connect my ipad to the high speed inernet connection in a hotel room

every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

Is UNITE-CB1B @ 4G considered a high speed broadband connection? My Macbook does nothing well

Is UNITE-CB1B @4G considered a high speed broadband connection. I've tried three times to download Mavericks and no go. Is it my Macbook or my Wifi? If it's my Wifi, I guess I'm just screwed. Very down on Apple right now.

Make sure your MacBook Pro meets Mavericks requiremennts > OS X Mavericks: System Requirements
Mavericks is a 5.35GB file and requries a high speed broadband connection and requires 8GB or more of available disk space.
Backup all important files before upgrading
Checked to see how much space is available ??
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
You can test your download speed here > Speedtest.net - The Global Broadband Speed Test
Download speeds less than 10Mbps may time out before the 5.35GB file can download.
Keep in mind, after installing Mavericks, if at some point you need to restore OS X or repair the startup disk, that requires a broadband connection as noted here > OS X Recovery

Terrible speed when connecting two AEBS

Hello,
I've noticed that I get terrible speeds when connecting two AEBS, one FE and GE.
My setup is as follows:
Broadband connection -> Linux router -> AEBS(GE) --- wireless --- AEBS(FE) -> MacMini
Using my macbook (n-enabled) as reference I've noticed that as soon as the FE conects to the GE I loose roughly 70% of my bandwidth (from ~90mbit to ~25mbit). I got these figures by transfering a large file using FTP and moitoring the bandwidth use on my linux routers internal interface using nettop. I've tried switching places with the basestations with the same result. I've also tried all four different radio modes.
Any advice?

A drastic drop in bandwidth is to be expected when you are using one to wirelessly extend the other. This is because every bit of data has to be transmitted wirelessly twice. Once from the main base station to the remote/relay and then once again from the remote/relay to the client.

Wireless high speed internet connection

I would like to know if somewhere we can find a kind of PCS card for wireless high speed internet connection, but for power books and iBooks G4?
I'm living in mexico City and one company (iusacell) is offering the service but just with PCS cards for PCs, but no for macs.

Unfortunately, the 12" PowerBooks and both size iBooks lack the required PCMCIA slot for such cards, so they cannot be used at all.
The 15" and 17" PowerBooks do have a PCMCIA slot, but if your network doesn't supply Mac software or drivers, it probably can't be used.

Is Practical to use ODBC over high speed intenet connections?

I am developing an application using Oracle 10g as back- end and Visual Basic / Access as front-end. ODBC works fine in intranets for this purpose, but I wonder if it will work over high speed internet connections to manage several offices from the headquarters.
Any information on the subject will be appreciated.
Francisco

Connecting and using database connections over a WAN can be very slow. There are usually several network conversations for even the simplest SQL statements. An application that is used to querying the database each time it needs data can be brought to its knees when the latency goes up, regardless of how much bandwidth is available.
As long as the latency is less than 20ms, you probably won't notice too much. Once it goes over 50ms, you start to curse these database companies that don't use real streaming. At 100ms or more you start thinking that Citrix is the best invention in the world.
Jon

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

Fans on full speed when connected to TB-display

Whenever I'm using my thunderbolt display, the fans in my MBP (early 2011-model) goes up. Every 10 minute or so they ar on full speed (6200rpm), no matter what. It happens even when I'm not using any software, just watching my desktop
When checking iStat or Activity Monitor everything seems normal except for the fans.
Typical scenario every 10 minutes or so:
CPU:
User 3%
System 2%
Idle 95%
Fans (both left and right):
5800 - 6200 rpm
System:
Processor 2.2 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Software OS X 10.8.3 (12D78)
Solutions I have tried without success:
- reset SMC
- reset NVRAM and PRAM
- clean install of OS
- both open and closed lid
Any tips/help?
H.

The temperature is about 145ºF like yours, so maybe it's normal. I have tried with both the lid closed and open.
What I find strange, is that my colleagues (all with basically the same set-up as me: MBP and TB-displays) dont have this problem. They have both older and newer MBPs than I have. We all work with the same kind of work and software.
Yesterday I also tried to connect my MBP to a normal PC-monitor (minidisplay -> VGA) and still the fans went crazy. I can't remember having any issue with before, and as I said: I am the only one in my office that have this issue.

Slow speed since connected

I was with sky and getting 28mbps fibre, I decided to get bt infinity 2 and was told I would get these speeds
Your broadband speed
We estimate your download speed will be between 46.9Mb and 63.8Mb.
We estimate your upload speed will be between 12Mb and 18.6Mb. It's been in 2 weeks and I'm still only getting 27mbps. I have ran speed tests at speedtester.btwholesale.com and it says ip profile for my line is 27.7mbps I've reported it and now being monitored and they will be phoning me tomorrow, but I had an engineer out for my phone line last Saturday as advised by bt broadband help no phone fault but he told me he has found a fault with the fibre at the cabinet the ports are faulty and to get an engineer out to sort this well I've told bt broadband help this a few times since Saturday and they won't listen to me all they keep doing is making me do the same tests over and over and last night after they said they have rest my line ( still ip profile of 27.7) has refered it to some service team or something who will decide what to do. This is really annoying after all I've been told there is a fault and I'm paying for a service I'm not getting I should of stayed with sky. Sorry for the rant but nobody will listen I'm only telling them what one of bt engineers told me to tell them.

ive tried that it does not upload the images so ill type it out. availability checker results fttcA 63.8 46.9 down 18.6 12 down available
fttcB 53 29.5 down 18.6 8.4 up available. btw performance results Download speedachieved during the test was - 26.84 Mbps
For your connection, the acceptable range of speedsis 12 Mbps-27.82 Mbps .
Additional Information:
IP Profile for your line is - 27.82 Mbps
Upload speed achieved during the test was - 5.6Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

How to know current speed of connection in Kbps?

Does anyone know how to know the speed of network/internet connection? I couldn't find any member method of JAVA's class that returns this value. Very appreciate for all your hints.

Try something like this:public class Test
public static void main(String[] argv)
    try
      URL url = new URL("http://java.sun.com"); /* put a pointer to some big image here */
      InputStream is = url.openConnection().getInputStream();
      int bytes = 0;
      long ms = System.currentTimeMillis();
      while(is.read() != -1) bytes++;
      ms = System.currentTimeMillis() - ms;
      double kbps = ((double)bytes / ((double)ms / 1000)) / 1024;
      System.out.println("kbps = " + (long)kbps);
      System.exit(0);
    catch(Throwable t)
      t.printStackTrace();
      System.exit(-1);
}I suggest you repeat this test for several pointers and take the average...

G580 - pathetic download speed & wifi connectivity

I had purchased G580 laptop in October & upgraded to windows 8. Since then, the wifi problem has been regular. After updating the drivers the wifi is mostly. Once in a while I have to restart the router.. That's still OK, but the download speed is really pathetic.
I have another old Acer Laptop with windows 8 (upgraded) too. I have an 8 MBPS broadband connection. The Acer laptop has 1 Mbps download speed without any hindrance. But, the Lenovo G580 is giving 250kbps downloads, that too with regular stoppages. Another big issue - while.. this dead slow download happens, not even a single webpage opens.. Regular "error loading" messages.
Kindly help in rectifying the issue as I have updated all the drivers through windows update as well as lenovo site.
I'm using a bitdefender antivirus, will that have any problem with wifi speed ??
Kindly advice as the only other option is to discard the laptop.
thx
Satish

hi satishrk1978,
If you have the Atheros AR9285 Wireless Adapter, you can try to:
1. Update your wireless card driver to v10.0.0.221, get it here, otherwise skip this step.
2. Depending on your brand of router (and if applicable), make sure you disable WMM QoS (Wireless Multimedia) and WPS (Wi-Fi Protected Setup)
3. Use a WPA2-PSK TKIP or AES encryption.
4. If you have a dual band router (2.4Ghz and 5Ghz), try to use only the 2.4Ghz band.
5. Temporarily disable any running firewall / antivirus software.
5. After applying steps 1-5, try running a speedtest again via www.speedtest.net.
Let me know the result.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Slow speeds,lost connection

My router is west327 .windows XP sp3 avira_antivir_premium.when i connection work fine.the router shou the speeds is download3000kb up is 800kb. now
Transceiver Statistics
Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream Path DSL Speed (Kbits/Sec) 640 128 Margin (dB) 6.5 11.0 Line Attenuation (dB) 41.5 31.5 Transmit Power (dBm) 15.4 11.8
when the problem begin it lost connection a week,only few time can connect.when the connection get losting :the router show Your Gateway is Not Ready for Internet Access. I rest router ,change jack .right now http://www.speedtest.net/result/1090175936.png can't play online game. My fast download only get 68KB.when it work fine my fast download is 300KB. My phone get nosie,I can't hear the person taking. I buy a new phone ,it get a same problem

Call Verizon's Voice Repair number on a cell phone or another phone line and report noise/static on your phone line. An MLT should be ran on the line by the agent who answers and they should dispatch a tech. Once the phone noise is solved, the DSL service will improve. Before calling Verizon, what you should do is locate your NID and plug a phone into the test jack found inside of it to see if there is still static. If there is, proceed with what I mentioned above.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Very slow speeds, bb connection dropping

I had bt BB installed a few weeks ago.
For the first 10 days, I was getting 2mbit down/0.5mbit up.
After 10 days, it slowed down to 0.3mbit down/0.5mbit up.
Around the same time, my BB connection dropped out every 2-5 minutes. At this time I was getting 0.7mbit down/0.4mbit up.
It continued dropping out every 2-5 mins up to every half an hour until 2 days ago. Since then the connection has stabilised (no disconnects) at a speed of 0.5mbit up/0.1mbit down.
My stats are as follows:
Noise margin (Down/Up)
15.3 dB / 7.0 dB
Line attenuation (Down/Up)
18.0 dB / 4.0 dB
Output power (Down/Up)
14.1 dBm / 6.6 dBm
Loss of Framing (Local)
578
Loss of Signal (Local)
384
Loss of Power (Local)
0
FEC Errors (Down/Up)
89 / 55
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 29
Error Seconds (Local)
242
Download speedachieved during the test was - 382 Kbps
For your connection, the acceptable range of speedsis 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :1024 Kbps(DOWN-STREAM), 128 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
Upload speed achieved during the test was - 83 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 128 Kbps
I know something is very wrong, and I should contact BT to have it rectified. From the stats can any one make any educated guesses as to the problem - a SNR issue?
Much appreciated guys.

I sent an email to the mods but am yet to receive a response. How long do they usually take?
The line is now worse than ever - it does not stay connected for any longer than 20 minutes before losing sync, usually within 5 minutes. My stats now are:
Line state
Connected
Connection time
0 days, 0:12:00
Downstream
1,184 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
15.0 dB / 10.0 dB
Line attenuation (Down/Up)
18.0 dB / 4.0 dB
Output power (Down/Up)
14.2 dBm / 10.5 dBm
Loss of Framing (Local)
23
Loss of Signal (Local)
24
Loss of Power (Local)
0
FEC Errors (Down/Up)
2785 / 3
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 2
Error Seconds (Local)
21

Speed up connection

Similar Messages

Maybe you are looking for