Speed up encoding in Final Cut Studio 2

I just thought this was worth sharing. It may have already been posted but really valuable if you haven't read this before!
http://newmacusers.com/speed-up-encoding-in-final-cut-studio-2/17/
Have fun everyone!

Thanks... I've seen this question pop up now and again... will link here in future.
Thank,
CaptM

Similar Messages

How to get the Vimeo encoding in Final Cut Studio / Final Cut Pro (for web)

I have some films I would like to "display" on the web. It seems that vimeo.com has a great way of encoding films for the web.
http://www.vimeo.com/
Anyone who knows how to do the same encoding within Final Cut? Or are there other ways for web which will work also for windows user (to watch the video without downloading extra plugins?
I love how the videos starts almost instantly in hd on Vimeo! Al right it skips a bit, but then again it is hd on the web.....

This is sort of a workaround for what you're trying to achieve:
Here's a Ken Stone article on encoding for Vimeo.
So...what a lot of folks are doing these days, is uploading to Vimeo (or similar service). Then back on your own website simply "embed" the Vimeo movie. You can control the size & control colors of the embed. When you're on the Vimeo page for a particular video, you'll see the "Embed" link on the right of the video. Click that and it will expose the code you need to copy into your own website.

Does GPU speed transcoding by Final Cut Studio?

Does GPU ( NVIDIA QUADRO 4000 for Mac ) speeds transcoding by Final Cut Studio?

Motion can make some use of the GPU as can a few FCP effects. However only ATI cards were supported, not nVidia and the acceleration was only on playback, not rendering.
The Quadro 4000 will be a benefit if you are running Adobe CS5.5 apps (Premiere, AE, Photoshop). It will not aid FCS.
I just wish it had support for 3 monitors.
x

SlowestMacBook Pro Processor Speed for optimal Final Cut Studio Performance

I am looking to buy a MacBook Pro and I want to edit video on it using Final Cut Studio. Is a 2.53GHz processor plenty fast for editing... or do I need to go higher...? I am planning on getting 4GB of Ram and 7200 RPM Hard Drive.
I really appreciate the help, I just don't want to sacrifice performance or waste money

Hi,
I have a 2.33 GHz MBP with less GB of RAM and FCP works just fine, Motion is more GPU and RAM (4 is ok) concerned. Motion will run ok but may be slow at times depending on the project. Your setup looks pretty decent.
G.

What Mac to get for Final Cut Studio?

I've been doing most of my video editing for the last year or so in Sony Vegas on a PC. I'm looking to get into it a bit more seriously and want to make the switch to Final Cut Studio.
Can I run it on a Macbook Pro? Can I run it WELL on a Macbook Pro? Currently I'm running Sony Vegas on a PC with a Q9350 quad-core CPU, 4gb ram, and an 8800GT graphics card, and I'm not fully satisfied with the way it runs (encoding times are fine, but it's difficult to preview within the software with any semi-complex effects added). What should I be looking for in terms of processing speed and whatnot here? Could I get away with the 13 or 15 inch Macbook pros and still run things well?
Hard drive size is not an issue, as everything will be archived to a server.

This isn't the thread in post in.
Try here
http://discussions.apple.com/forum.jspa?forumID=939
It depends on which MBP, what type of video you are editing, and other factors.
Remember as well that FCS3 2009 includes FCP, DVDSP, Compressor, Color, Motion, and Cinema Tools, some of which are GPU based in part.

Final Cut Studio 2: Requirements and Recommendations

Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b

SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo

Final cut studio 3 and my mac pro major and unnecessary issues

just a heads up, sorry for my grammar, I have been using final cut pro since it was 3.0 on my old g4 upgraded to every version since. ive edited on final cut pro ruffly 40 hours+ per week since. now i just upgraded to final cut studio 3 about 2 weeks ago and ive been having major issues with speed and freezing and rendering and the new sharing features and motion and everything.
lets start from the beginning.
i have a mac pro 1,1 with dual core intel xeon 2.66 ghz
7 gb of ram
osx 10.5.8 (cant upgrade to snow leopard just yet due to sxs problems and heard its even slower)
NVIDIA GeForce 7300 GT (thinking may be the culprit)
i have 2 monitors one 22" and my main 24" running both through a dvi cable
now the first hour i started working the computer froze up completely, mouse frozen and everything
(never happened before) after a day of unexpected quits and constant restarts i disconnected my second monitor.
im still having the speed problems sometimes even seeing scrambled images for icons on my os dock. i dont know what to do. ill leave something to render over night, wake up and check on it and the program quit. again. i have a deadline on a video coming very quick, and ive been searching this issue on all the discussion boards here and creative cow and haven't seen an answer yet. spoke to customer support early in the issue and tried everything they said ie: new user, different drive, yada yada yada. the only thing i havent done is reinstall osx and flush my whole computer. im definatly not prepared to do so and then still have the problem. anyway. if anyone can get through this runon of a post please please help im despreate. let me know if you need anymore info and ill be glad to provide it, and if anyone that helps lives in the ny area i would be honored to buy you a drink in return for your support.
thanks for your time.

HOW did you upgrade? Install FCS 3 on top of FCS 2? That is not the best way to do it. Plus some of the issues you are having seem like OS issues. The best thing to do is the "scorched Earth" approach. Fresh install of the OS and fresh install of FCS 3. Always when upgrading this is the best method. And the make sure that you can go back if things don't work is to get a NEW hard drive, install the OS and FCS3 on that, and keep the old drive. Or clone your hard drive (carbon copy cloner), then erase and install. Or at least clone your drive before you update what you have (which is not the best way).
Too late now, I know, but file that away for the future. Now you should backup all your data, then erase and install Leopard again, then install your Apps. This will take a day, maybe a day and a half, and then you will be up and running. Better than trying to stuggle for days or weeks with a staggering OS.
Shane

Final Cut Studio 2 on a MBP

I have a couple questions regarding the MBP capability and performance when working with all the programs in FC studio 2. Thanks ahead of time to any and all of you who reply, your knowledge is greatly appreciated.
Please keep in mind all of these questions are in regards to performance or capability with final cut studio 2.
I am very set on a MBP as opposed to the mac pro desktop, but does the MBP have any hick ups when trying to work in any of FC studio 2?
From what I have read most people say the 2.4 to 2.6 upgrade is not worth it is this still true if you plan on working in FC studio 2?
I plan on purchasing a 2 gig model and adding 2 more gigs my self, any recommendations as far as a company or site or both is again greatly appreciated.
15 inch or 17 inch, and why or why not?
160GB Serial ATA Drive @ 5400 rpm or 200GB Serial ATA Drive @ 7200 rpm, again why or why not?
From what I have read you want to go with antiglare as opposed to glossy because it throws off the true color, is this correct?
Is the higher resolution upgrade for the 17inch worth it?
thank you again,
John

hi lots of questions hope this helps
i have the MBP 2.4 15 inch
i have not found any problems with my MBP so far except the size of the hdd once ive installed all my apps i found with a lo o customizing out 0f my 160gb i have about 40gb left after i installed everything including the full FCS-2
the speed is great not as good as a mac pro tho but it is a portable compatible tho.
i have upgraded my 2gb to 4gb you will need to buy 2x 2gb sodimm sticks i found mine on ebay quite cheap and a decent make aswell. it does help with booting up and FCP running.
i have the 15 inch as it is easier to carry round to uni and clients, 17 inch is big and bulky
200gb would be better but 160gb will do, use a external hdd as a scratch disk the bigger the better and firewire 400 atleast 800 is better
yes the glossy screen will do funny things with the picture and shine in day light, glossy is great for watching dvd's but not editing.
the higher res would be great but you can get away with a 15 inch res but FCS color does work best with a HD res screen
all in all i hope that helps
have fun

Looking for advice on a new Mac Pro system mainly for Final Cut Studio 2

We are a small video production company that works mainly on broadcast and internet projects. We're looking to upgrade from an aging Avid system to a Mac Pro running Final Cut Studio 2. The primary thing we want from this system is to be able to work quickly in Final Cut while at the same time doing other operations, and we're willing to spend what it takes to make that happen. We've done a lot of research but still have some issues where we could use your expertise - it's a big investment and we want to nail it.
Here's the configuration we're considering:
Processor: Two 3.2GHz Quad-Core Intel Xeon (8-core)
Memory: 16GB (4 x 4GB)
Hard Drives: 300GB 15,000-rpm SAS (for OS X, Final Cut, & other programs) plus 2 x 1TB 7200-rpm Serial ATA 3Gb/s (for video storage)
Graphics: NVIDIA Quadro FX 5600
We're thinking about spending the extra $1600 to get the best processor available, since we want this machine to be the hub of the business for about five years. Any thoughts on whether to save a bit and go with the 2.8GHz? We've also heard the bus speed presents a bottleneck so the Quad-Core processing power can't be fully utilized - should that have any bearing on our processor decision?
The memory choice seems right - we'll see how well that works and retain the option to double the RAM, particularly as prices fall and new applications or hardware upgrades become tenable. However, we're thinking of perhaps buying some or all of the memory third-party - any advice on whether this tends to be worthwhile, where to get it, and what to watch out for? It looks like there may some issues with getting proper heat-sinking.
We like the hard drive plan, though we've heard a 15,000-rpm drive may generate a lot of heat - any thoughts on this?
The graphics card is where we're most torn - specifically between the Quadro 5600, the GeForce 8800, or perhaps even getting the computer with the standard card (or no card) and getting a different third-party card. We do mostly DV now, but we foresee doing HD projects in the future. We often use a green-screen that's in our studio and also apply minimal 3D effects as well as 3D text. We're debating whether to get the Quadro 5600 right off the bat and hopefully have no issues with it, or whether to get the GeForce 8800 for now and if we have issues then consider upgrading to the Quadro 5600 or potentially something else that would best suit our needs at that time. Would love to receive any and all advice on this issue.
Also, it looks like we're gonna buy Final Cut Studio 2 and are considering also getting Final Cut Server. It seems the combination would allows us to use the Final Cut suite on other computers (both Mac and Wintel) that don't have their own version of Final Cut installed. Is that the correct interpretation? Any other advice on whether to get FC Server would be appreciated.
Thanks very much for reading - we look forward to getting any and all advice you may have.
Dave & Tom

interdiscipline wrote:
Here's the configuration we're considering:
Processor: Two 3.2GHz Quad-Core Intel Xeon (8-core)
*Don't do it!* Stick with the dual-2.8GHz config. A jump from that to the dual-3.2GHz gains you only an approximate 9% increase in power at a 52% increase in cost! Not worth it all. That money is much wiser spent on RAM, RAID array, or a broadcast monitor.
Memory: 16GB (4 x 4GB)
Hard Drives: 300GB 15,000-rpm SAS (for OS X, Final Cut, & other programs) plus 2 x 1TB 7200-rpm Serial ATA 3Gb/s (for video storage)
Graphics: NVIDIA Quadro FX 5600
We're thinking about spending the extra $1600 to get the best processor available, since we want this machine to be the hub of the business for about five years.
The processor is only one part of the whole, and as I just mentioned, the power:cost benefits are not good.
The graphics card is where we're most torn - specifically between the Quadro 5600, the GeForce 8800, or perhaps even getting the computer with the standard card (or no card) and getting a different third-party card. We do mostly DV now, but we foresee doing HD projects in the future.
Quadro 5600 is pricey, but I'm not sure about its benefits for people in our field. Even if I had the money for it, I would be hard pressed to consider it considering, again, money is liekly wiser spent elsewhere.
Also, it looks like we're gonna buy Final Cut Studio 2 and are considering also getting Final Cut Server. It seems the combination would allows us to use the Final Cut suite on other computers (both Mac and Wintel) that don't have their own version of Final Cut installed. Is that the correct interpretation?
I don't know much about FCServer, but my impression is that it is -- simply speaking -- Final Cut version of Avid Unity. In other words, I am pretty certain that your understanding on that is false. I may be wrong.

G5 Power PC vs Imac...which is better for editing with final cut studio 2?

This is my present computer:
iMac 3.06GHz Core 2 Duo (2008 model)
4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
NVIDIA GeForce 8800 GS 512 MB
Hard drive: 465 gig (I use mainly external drives for editing)
I use this mainly for video editing with final cut studio 2.
Rendering in compressor takes forever!!!
A friend suggested I pick up a used G5 Power PC.
I found this one, here are the specs:
APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
System Mac OSX 10.5.8
RAM 12 GB
1 Hard drive of 160 Gb
Superdrive 16x CD/DVD/DL DVD (32x)
Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
3 open PCI-Express expansion slots.
1x FireWire 800
3x FireWire 400
4x USB 1 and 2
2x Ethernet Port
2x Displays ports
Is this insanity or a smart move to move over to the older G5.
According to my friend, the older G5s are much better at processing video.
Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
OR is there another option that someone might be able to suggest?
I would be so appreciative of any opinions regarding this issue.
Thanks in advance.
Bill

Save your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
Beyond running compressor, it is just a better all round machine for editing video.
• it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
• it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
• the slots give you the ability to connect esata raids for even higher data speeds
• you have much greater flexibility with computer monitors
• you have much greater RAM capacity
and so on ...
x

Mac Pro - Final Cut Studio 2 - Adobe Production Premium - NO FLASH PLAYING!

I recently purchased a Mac Pro with Leopard, Final Cut Studio 2, and Adobe Production Premium suite. I got everything setup yesterday, and I exported a Quicktime reference file from Final Cut, and brought it into Flash CS3 Media Encoder. The file seemed to encode fine, but when I try to open it, it shows that the Flash Player opens, but the video never actually opens. I also tired to import the FLV file into Flash Pro, and it acts as though it imports, but it does let me preview it. The ONLY thing that I think could have caused a problem is that I also have Sorenson Squeeze installed, which has its own On2 VP6 encoder. Again, this may have nothing to do with it since I copied the file to another Mac machine that did not have Sorenson on it, and downloaded the standalone Flash Player, and it acted the same. Any ideas on why FLV files would not play back would be greatly appreciated. I have ALL updates installed for OS X Leopard, as well as the CS3 collection. Thanks in advance.

After downloading an FLV player, and realizing that Adobe Flash Player will not work, all is swimming.

Firewire and final cut studio 2 question

I just got a Macbook Pro and I'm loving it! I also have Final Cut Studio 2 and i'm anxious to start playing. my question is about what type of firewire i need to get to capture video from my Canon hv20 camcorder. which is better, a 4-pin or a 6-pin? I see from a previous post that the 6-pin can supply the camera with power. I'm not so concerned about that, I'm just wondering what are the other important differences (if any) between 4 pin and 6 pin? differences in speed? vid quality? and if i decide to buy an external hard drive to keep my video files on, does that change my decision? thanks for any advice/answers!

+"I'm just wondering what are the other important differences (if any) between 4 pin and 6 pin?"+
Just two wires that carry power. A 4 pin connecter is a differnt shape to a 6 pin and are not interchangeable. All miniDV cqameras use a 4 pin system.
+"differences in speed? vid quality?"+
No different.
+"and if i decide to buy an external hard drive to keep my video files on, does that change my decision? thanks for any advice/answers!"+
Not at all. An external drive will require a 6 pin cable.
From camera to external 4-6 pin.
From external to Mac 6-6 pin.
This info assumes you are using firewire 400. Some Macs have firewire 800 which requires a different cable to the 6 pin.
Al

G4 and Final Cut Studio 2?

I'm running a dual 1GHz power pc G4. Thinking about installing Leopard and Final Cut Studio 2. I'm editing DV not HD. Is my G4 going to handle? Or, should I think again?
Thanks,
m

Don't do it. You will hose yourself big time like I did. Final Cut Studio 2 requires a processor speed of 1.25GHz or faster. It does not care thet you have a dual 1GHz. I have a Dual 1GHz G4 as well and FCS2 would not work. I had to uninstall it and start over by installing my first version of FCP and all of the upgrades to get it back to 5.1.2.
Hope it's not to late.

Final cut studio and macbook pro

hi i have final cut studio 2 currently installed on my imac, and it kinda slows my general use of the computer
i bought a new macbook pro (the new one with aluminum casing), but its only the base, and i have not upgraded it in any way, so it is as it comes
and basically i was wondering, if i installed the entire final cut studio 2 (and aperture), how would it affect the general speed of the machine when doing other general tasks not FCS related:
a) while FCS is running
and b) while it is not running
i also want to run games off of my MBP so i really dont want to compromise speed

It needs to be filled with RAM, and when running Pro Apps, in the faster graphics processor mode. Mail, etc. will likely run fine along side them. I'd not play games when rendering though.
When they don't run, they don't affect anything but disk space 60 gigs for it all including Templates... RAM is the key to running multiple apps on any given Mac.
Nice Mac too. I just saw one the other day for the first time. I love that new trackpad the most. It's likely a lot faster than my 2.3 laptop, and I can run all the apps at the same time no problem with it. But ya need to fill up the RAM. I like that it's so green.
Jerry

System requirements for Final Cut Studio 2

Hello. Can anyone help please?
There's a Final Cut Studio 2 that I have been offered to purchase, and I would like to go for it, only I'm not sure my machine will install it.
The machine is this:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro5,5
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.53 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP55.00AC.B03
SMC Version (system):    1.47f2
Serial Number (system):    W894993366E
Hardware UUID:    A0C3CB0E-3521-5238-8B44-450211CE479C
And it is running OSX 10.6.5
I mainly want to run the Final Cut Pro 6 from the FCS2 Suite.
Will it work!?
Any help gratefully recieved.
Many thanks
J

Well I've asked him if he will. He's an Amazon seller, so... fingers crossed. Are there any other ways I can check? I've looked at the minimum system requirements on the Apple site, and it seems to be okay, but of course the Apple rep I spoke to seemed very doubtful (said that I should have to re-install the older OSX (5.5?) (that was out at the same time) by partioning my computer, so I could run both, and wanted to sell me FCP X instead. I of course told him I had heard the reviews and would only buy it over the counter named "my dead body". He promised me he wasn't on a commission basis, but.... he didn't seem very helpful!   Cheers Ian.

Speed up encoding in Final Cut Studio 2

Similar Messages

Maybe you are looking for