Speed while updating through pc suit

How much speed is required while updating my nokia 6131 through nokia pc suit? Is there anyone knows that?

I doubt that software file for 6131 very large and your internet connection would have to be pretty slow for it to time out, as file stored locally once download completed.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

No updates through Ovi Suite

Hi all,
I am running the latest version of Ovi Suite for my Nokia C3-00.
My C3 still has SW version 03.61 and I suspect that some issues can be resolved through firmware update 7.20.
Unfortunately I can't get the update. I connect to Ovi Suite by Bluetooth without problems. But as soon as I press the update button, it checks the Ovi Suite upadte ( none available, as I downloaded yesterday ) and when it checks for phone updates it says it cannot connect to the service.
Ovi Suite has access to the internet, not blocked by firewall or AVG.
Software updates through phone itself ( FOTA ) will not work either, as the install SW update function is greyed out.
Help !
Any suggestions greatly appreciated.
Attachments:
Ovi Suite.jpg ‏62 KB

MikeYates wrote:
Have you tried the "Nokia PC Suite" ?
You might have to lie about your windows version and phone model to get it nowadays, though!
If you look here you will see that there is no option for updating software with PC Suite for C3-00:
http://europe.nokia.com/support/download-software/pc-suites/compatibility-and-download
Happy to have helped forum with a Support Ratio = 42.5

Error code 300 while installing through Ovi suite

Trying to update Opera on a C3-01 with Ovi Suite 3.1.1.90: "Something's gone wrong. There was a problem installing the file. Error code: 300". What does this mean and where does Ovi Suite store its detailed log?

This attachment will cure the 300 error code remember to install it on C DRIVE and in the correct order, I got this from NOKIA and it has just solved the problem on my N8 Good luck Clive.
Install the following QT files on the C: drive of your phone in exactly this sequence
* http://dl.nokia.com/ns/sdo/QtSA4.7.301.sisx
* http://dl.nokia.com/ns/sdo/QtWebkitSA4.8.0.sisx
* http://dl.nokia.com/ns/sdo/QtMobilitySA1.1.301.sis
While you install above QT files you MUST keep the following things in mind:
o Installation must be done to C: drive of the phone. If you by mistake select E: drive, you can cancel the installation and re-install again. If E: drive installation is complete, you can re-install one more time and select C: drive for installation.
o Installation order must be met. First it has to be QT (QtSA4.7.301.sisx).
- Start Ovi Store
Good luck

My iphone 4s was not not upgrade to ios 6,while updating through itunes, I am getting "you do not have permission to access the requested resource"

i do not even update my iphone through 3G also...

Hello Tirumal,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best of luck,
Mario

Ovi maps data update through Ovi Suite A bug?

Don't know if its a problem but the darn Ovi suite keeps prompting to update the maps data in my N97 mini even I have already done it twice. Seems like it just read and check my phone maps data and just erase everything and download all the data over again. Doesn't seems to be optimized. Should have program the updater check the data files size or date tag and just update those outdated files, instead of everything. If I have a huge maps data in my phone it'll be a loooong wait.
Anyone having the same problem?
I'm still getting prompt today to update my maps data. Doubt that nokia tech can update their maps data that fast.

iwant gps data

Bug 9953612 : MS ACCESS THROWS ORA-1461 ERROR WHILE UPDATING THROUGH 11.2 ODBC DRIVER

Hello,
i really cant find the patch. I am wrong or is there really no one after years.
Can somebody post the link to the patch if it exists, please.
greetz
Rigoletto

> "UPDATE PRODUCTS SET pPrice = newPrice WHERE pID
= productID"
The newPrice and productID are variables and you need to append them to the SQL string. Also, you need to provide single-quotes around those values.
Your update SQL should look like:
String updateSql = "UPDATE PRODUCTS SET pPrice = '" +newPrice
+"' WHERE pID = '" +productID +"' ";A better way is to make use of PreparedStatement. In that case, the sql string would be:
String updateSql = "UPDATE PRODUCTS SET pPrice = ? WHERE pID = ?"and use setString() in PreparedStatement to set the parameters.

While updating through my pc my x10 software has crashed

my internet lost its signal so there was a lapse in the time time of update then complete phone has crashed and it doesnt turned on furthur for which i have spent 1000rs in the service centre
pls provide an information which we can do on our pc.....

http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe
download this and repair ur phone urself..
click on repair and the software will tell u what all u have to do.

BDC to update CAT2 transaction.one issue while updating CAT2 transaction

Good Day Friends,
i have one issue while updating CAT2 transaction,
i have enhnced 3 custom fields in CAT2 tx-code. while updating through manually the data is getting stored in CATSDB tx-code for this i have done validation in enhamcement spots ECC 6.0.
but when i am running bdc this custom field data is not updating in CATSDB table.
my dout is will BDC work for enhancement spots or not , also please suggest if you have any idea ?

Hi,
Usually I am trying to avoid BDC. So I would try to use BAPIs BAPI_CATIMESHEETMGR_INSERT and BAPI_CATIMESHEETMGR_CHANGE. Similar to other BAPIs, you can pass values for your extended fields using table EXTENSIONIN. It's described in BAPI's documentation or look for EXTENSIONIN on SDN. The principle is same for all BAPIs.
Regards

Error while updating bank details through ESS

Hi All,
While updating banks details through ESS, " change in the payroll past not possible".
I have checked IT0003 and noticed that accounted to 31.08.2014.
I assume this might be causing the error. Could you please advice with your expertise.

Let me explain how it happens and why we don't allow change of bank records in past 1959820 - ESS: Wrong delimit of TC3 records For other scenarios where ESS behavior is similar to PA30 :
An example i share
For other scenarios where ESS behavior is similar to PA30 :
Current date < End date of current payroll period
Current date > Accounted to date in IT0003
Payroll status: released for payroll Got error when reviewing the editin
-g.
Error: Online maintenance is locked in payroll area QM
Current date < End date of current payroll period
Current date < Accounted to date in IT0003
Payroll status: released for correction Got error when reviewing the edi
-ting.
Error: Change in the payroll past not possible
Current date < End date of current payroll period
Current date < Accounted to date in IT0003
Payroll status: released for payroll Got error when reviewing the editin
-g.
Error: Online maintenance is locked in payroll area QM
When the infotype 0009 is modified, the system is regrouping data for the infotypes which are checked releavnt according to the table T582G. Retroactivity is checked via V_T582A In view V_T582A for infotype 0009 you will see, I guess, that the field 'Past entry all.' is maintained with an 'E'. This means that it is not allowed to maintain any infotype 0009 record for the payroll past. The important day for this check is the last day of the last accounted period. Retroactive change of infotype 0009 is not permitted as the bank transfer is already done. This is the reason why this infotype can not be changed retroactively. For bank records end user must not be allowed to maintain past date records and should not be allowed to change any other detail of record when payroll for that period is already run. for e.g. if current date is 26/11/2013. Then end user must not be allowed to edit other bank record effective from 25/11/2013. We should not allow end user to edit record effective from 27/11/2013 because payroll is already run for that period. If user is allowed to change then data maintained in infotype 9 and information send to payroll may be different. You can use BAdi HRXSS_PER_BEGDA,to default the next payroll period

HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

I am getting this message also.... mine cant update too...

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Get Error while update the User defined row table through DSK Code

Hi experts,
I have got an error while updating the user row defined table.
Error is - "Invalid row"
I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
Following Code used for updating the user defined child table.
SAPbobsCOM.GeneralService oGeneralService1 = null;
                                SAPbobsCOM.GeneralData oGeneralData1 = null;
                                SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
                                SAPbobsCOM.CompanyService sCmp1 = null;
                                SAPbobsCOM.GeneralData oChild1 = null;
                                SAPbobsCOM.GeneralDataCollection oChildren1 = null;
                                sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
                                oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
                                // Get UDO record
                                oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
                                oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
                                // Add lines on UDO Child Table
                                oChildren1 = oGeneralData1.Child("CBF_FAR1");
                                // Create data for rows in the child table
                                SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
                                oCombo = oItem.Specific;
                                string ShedCode = oCombo.Selected.Value;
                                ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
                                ldna_Rec.DoQuery(strQuery1);
                                oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
                                oChild1.SetProperty("U_Status", "Ready For Schedule");
                                //Update the UDO Record
                                oGeneralService1.Update(oGeneralData1);
Please Help me it is an urgent requirement,
-Regards
Vikas

hi.
Error is - "Invalid row"
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
As per my knowledge
What i understood is you have 5 lines and you are going to be update 5th line
am i correct..
while u are updating the line in child table
you have to consider like this..
line number         u have to update like
1                                        0
2                                        1
3                                        2
4                                        3
5                                        4
which means in child table treat
line 1 as 0
line 2 as 1
line 5 as 4
If you want to update the line 5 u have to mention 4 th line

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Facing problem while updating IInfotype 0009-bank details through workflow

Dear SAP Gurus,
I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
Scenario:
Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
Can anyone help me to understand how can these fields be updated ?
Quick help will be highly appreciated.

Hi Spantaleoni,
Thanks for your quick response.
Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically, rather we should use the available data in it.
Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
Regards

Sent an email while updating bank details through portal

Hi Experts,
I have an issue with EP portal.
when i change the bank details through portal its updating in info type 0009(bank details).But i have to send a mail while updating.
Can any one please suggest me how to do this.
Thanks & Regards,
Sujatha sahu.

Hi Experts,
I have an issue with EP portal.
when i change the bank details through portal its updating in info type 0009(bank details).But i have to send a mail while updating.
Can any one please suggest me how to do this.
Thanks & Regards,
Sujatha sahu.

Speed while updating through pc suit

Similar Messages

Maybe you are looking for