Speedgrade and "Bleach bypass" effect

I'm editing in PP and direct linked to SG.  I have applied the Bleach Bypass effect in SG, and it looks killer on this one shot I have, but when I direct link back to PP, the effect is NOT there.  It shows up as a "lumetri effect" under the effects tab, but the effect is NOT there.  Toggling on/off the lumetri effects button has no effect.  Can someone else try this and see if they can get the bleach bypass effect to direct link back to PP>  I think it might be a bug in PP (since it seems to work fine in SG), and I want to report it, if it is not working.

Did you hit Enter to commit the effect?  Simply selecting it is just a preview.

Similar Messages

  • I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe?

    I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe To continue using my ipad ?

    This isn't due to malware. There is no known malware capable of infecting an iPad that has not been jailbroken (ie, hacked to allow apps from outside the App Store).
    As lizdance40 says, your Hotmail account has been hacked remotely. Change the password immediately. Hotmail accounts are popular targets, but as long as you choose a good password, and make sure that password is not the same as a password you use with any other account, you should be safe.
    I disagree with lizdance40's statement that you have to abandon the account and create a new e-mail address. If a hacker is able to get back in even after changing the password, the problem is not with the account itself. There's another vulnerability of some kind somewhere. Perhaps the account allows hackers to leave a "back door" to get back in (such as with GMail's delegation feature), in which case any such feature needs to be reviewed and have settings changed. Perhaps you are checking mail in an insecure manner while on an insecure network (ie, a wireless network that requires no password). Perhaps you are using a password on multiple accounts, and a different account has been compromised. Perhaps a hacker has used knowledge gained by prior access to your account to achieve "social hacking" (ie, convincing a tech to give him access because he has "forgotten the password"). There are many scenarios, but there's no good reason to abandon the account entirely.

  • MOH and Media Bypass no longer working after Skype Business updates

    Not using the Skype Business skin but still using the Lync Enterprise 2013 skin
    1 - MOH still works ok with call park but not for basic Lync to Lync calls or Lync to PSTN calls. Basically I noticed that CsClientPolicy EnableClientMusicOnHold was now set to false instead of true and so I set it back to True and set the music file path
    as per below. Now when I place a call on hold I hear the new soft swoosh sound for going on hold but I don't not hear any music. Under Options>Ringtones and Sounds I have the following  file selected: C:\Program Files\Microsoft Lync Server 2013\Application
    Host\Applications\Conferencing Attendant\Media\Music\DefaultHold.wma which seems to work fine for call park but not basic call HOLD. Note: the Hold/Resume functionality/sip signalling works ok - any ideas?
    2 - My current setup is with a Mitel MiVB PBX connected via a sip trunk (does not support TLS/SRTP and so it is disabled and using TCP/RTP) to Lync Enterprise 2013 with redundant mediation servers Ms-1 and Ms-2. I have Network Configuration > Global
    > Enable media bypass and Always bypass selected and enabled, as well, under Voice Routing > Trunk Configuration >  [Encryption support level = Not Supported / Refer = 3rd party / Enable media bypass = enabled / Centralized media processing =
    enabled] ... after the update the media is not bypassing mediation servers anymore ... any ideas as to why?

    MOH issue: Thx but i have tried many times without success, I even added and pointed to a new file magicHold.wma (BTW DefaultHold is a .wma file and not .wav) which I have set for both Call Park hold and basic call hold (i can see the file is selected
    under the lync client options > Ringtones and Sounds > Play MOH + <.wma file path>. The magicHold.wma file is played ok during call park but for basic call there is still still NO MOH regardless of which file I select for basic call MOH
    - I have restarted my VM-Front End server box without any chnage - is there anything else that could possibly be affecting this? Also when I capture the RTP on the mediation server I don't see any MOH RTP being sent from Lync to PSTN when on hold. Please advise
    if anyone has any other insight.
    Set-CSClientPolicy –Identity Global –EnableClientMusicOnHold $true –MusicOnHoldAudioFile “\\lyncservername\LyncMOH\DefaultHold.wav”

  • Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

  • I have an optical sensor and two hall effect how can I data log?

    I have built a test rig which consists of a gyroscope.  The gyro is spun up by and electric motor.
    I need to measure the speed of rotation.  I’m using an optical sensor and two Hall
    Effect sensors.  I would like to record the
    output of these and I would like to build in some redundancy because there will
    be another bigger rig that will require more measurement.  E.g. vibration.
    I’m new to data logging so I’m not sure which hardware I
    should be getting.
    Thanks

    analog inputs are the most universal.  with software such as the functions included in the Sound and Vibration Measurement Suite, you can analyze the analog input channel which is connected to your hall effect and optical sensors for frequency and speed.  Vibration specific input cards will power accelerometers.  with the speed and angular position sensors (hall effect and optical) you can combine this information with your vibration sensors to determine the movement of the device with respect to position and speed.  These order analysis functions are part of the Sound and Vibration Measurement Suite. 
    What is more is that the Suite includes an assistant.  The assistant allows for the capture and datalogging of all analog and digital inputs as well as frequency and vibration analysis.  This is all configurable and does not require any LabVIEW programming.  If you decide you want LabVIEW programming, all the functions are there to support LabVIEW as well. 
    Here is the link:
    http://www.ni.com/soundandvibration/
    Preston Johnson
    Principal Sales Engineer
    Condition Monitoring Systems
    Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
    National Instruments
    [email protected]
    www.ni.com/mcm
    www.ni.com/soundandvibration
    www.ni.com/biganalogdata
    512-683-5444

  • Drag and Drop audio effect hits all tracks

    How is it that when I drag and drop a tried and true compressor effect onto an audio clip (FCP6), it now takes to all audio tracks from the same clip. Then I have to go back and remove the effect from the other (3) tracks. Bug, or setting I'm missing?
    Forrest

    Final Update: ...god willing...
    OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
    Wish me a lot of luck in the future.. I'm sure i'll need it!

  • Send to Speedgrade and Export EDL problems

    So I'm working on a small series. I've got a final cut on Premiere Pro, and having already tested out Speedgrade I would like to use that for my final color correction and export. However I'm running into problems I'd never run into before. First the "Send to Speedgrade" option. When I use Send to Speedgrade, having my sequence selected, for some reason it is only exporting the audio and not the video. Once Speedgrade opens all I have is the .wav in the timeline from my sequence, but nothing else, all on one track. I've tried making sure my video was all on one track in Premiere Pro, and exported the audio and re-imported to put that on a single track in Premiere Pro as well, but still no joy. Seems strange cause I've never had this issue.
    So I tried the export as EDL function, which never seems to work cause certain "edits" are not supported (even though it's just simple cuts.) In another forum I found out the issue can also be with the audio, so I tried to cut the audio from my sequence in Premiere Pro, export as EDL, and then open up that within Speedgrade, and importing the aformentioned audio track separately on the speedgrade timeline. This lets me open the EDL no problem (no red error message) and then reconnect the reels using my desktop, but my issue then becomes the audio. I can bring the audio in fine, but I didn't count on the fact that when I rebuild the reels it uses the audio from the original files as well. (obviously I can mute the track, as I just realized that simple fix while writing this issue up, but I still feel like I might be doing something wrong - because when I try to consolidate all the audio/video onto two separate tracks in Premiere Pro, it'll let me open the EDL I export into speedgrade, but the audio is still not showing up unless I import that separately.)
    Anyway this is just weird as I never ran into these problems before. They might be first version issues that have been resolved, but I refuse to update speedgrade because everytime I do it crashes on startup, and no one has helped me with that previous issue, and despite my best efforts at resolving it using the forums I haven't had any luck.

    Regarding the problem when you "Send to Speedgrade" and only the audio shows up, I just worked through the same problem (Premiere Pro CC 7.01)
    You need to make sure the "work area bar" is selected around your timeline that you want to send to Speedgrade. If it has disappeared mysteriously (as it did for me), simply double-click where it usually shows up and it will reappear, with in and out points set to the extents of your timeline. Then send to Speedgrade and the video is sent along with the audio. Seems like a bug, or at least something that can be better documented. Though I suspect this workflow has changed in 7.1 ...
    Cheers
    Andrew Kornylak
    fourmilemeda.com

  • HT1476 Hi! So my original iPhone 5 charger broke and I bought a 10 ft generic iPhone 5 charger And didn't come with a power adapter, what ***** is it charges slow. Can I use a different adapter? and will it effect my battery?

    Hi! So my original iPhone 5 charger broke and I bought a 10 ft generic iPhone 5 charger And didn't come with a power adapter, what ***** is it charges slow. Can I use a different adapter? and will it effect my battery?

    Nice try! Take a hike.

  • Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Thanks Todd for all the info.  It is much appreciated and very helpful.  On a different note, could you possibly direct me to the correct forum to fix this bug?  I am suddenly recieving a warning on my System SSD referencing Adobe Exchange.  Here is a screen grab to best explain:

  • X-Fi XtremeMusic and SPDIF bypass with Windows 7

    Hello
    I moved from Windows Vista to Windows 7 (64 Bit) now I wanted to use the SPDIF bypass option with the Digital I/O Module again, but in the "SPDIF E/A" tab the drop down box "Settings for SPDIF input" is disabled.
    What I need to do to get the SPDIF bypass to work again?
    (I don't need any Dobly/DTS decoding - it's just a simple?PCM signal.)
    Best regards and thanks in advance
    Andreas

    Re: X-Fi XtremeMusic and SPDIF bypass with Windows 7l Hello hwoarang5,
    why do you think that this is disabled in Windows 7 and Vista?
    It worked fine in Windows Vista, too.
    Anyway, I've searched yesterday evening?a little bit more and solved the problem myself. To enable SPDIF bypass you have to do the following:
    . enable Digital Input in the Windows 7 sound settings (it'sis disabled by default and I forgot about it).
    2. change the FlexiJack mode in the audio settings of Creative to "Digital E/A".
    3. now enable the "Recordation with bit adjustment" (don't know how this is called exactly in the English version).
    When there is a PCM (DTS and Dolby is not supported) signal now at the Digital Input you should here something now.
    Hope this helps somebody.
    Best regards
    Andreas

  • Why did Speedgrade and AfterEffects drop from Communities list?

    Late last week the "Communities" list disappeared for a couple days, then has re-appeared, but ... with a diminished listing of other forums "communities".
    Especially, BOTH the Speedgrade and AfterEffects forums are no longer listed with the accompanying link.
    Especially as Adobe has NOT seen fit to list Speedgrade in with the "popular" forums the only way to get there has been by using that link on the Communities box OR by doing a full "search" for the forum. Now, the only way to get there is to search for it.
    Why?
    Neil

    This is what I see in Firefox ...there on the right, in the "communities" box, sat Ae & Sg up until last week ... they're gone now.
    I've done my navigation between sites just by using that box.
    So ... you're suggesting I go out to the "general" communities page, click on the drop down and hunt for Sg ... but until last week, it was right here.
    Can you see why someone's change is quite annoying? Unncessary, and causes more steps that I didn't need to take ... and ... why? What use was it to remove Ae & Sg from that box?
    Neil

  • New Exchange Plug-in for CINEMA 4D and Adobe After Effects

    In case you haven't seen the news from Maxon today, they have come out with their own native plugin to export AE 3d comps to Cinema 4d.
    http://www.maxon.net/en/news/singleview-default/article/maxon-announces-a-new-exchange-plu g-in-for-cinema-4d-and-adobe-after-effects.html

    Yes. If you render out your C4D file into a format with alpha, you could very easily place a video behind it in AE. You can even easily bring your C4D camera move into AE if you wanted to. For several years Maxon has provided a plugin to bring a C4D project's cameras, lights, and nulls or solids (that have been tagged with the External Compositing Tag) into AE. Lately, however, there is another way. If you have AE CC (version 12) or CC 2014 (version 13), there's another way: details of CINEMA 4D integration with After Effects

  • Isues with speedgrade and dynamik link.

    hello, my newly downloaded SpeedGrade is no option to open a stream of premiere pro, I have the CS6 version of SpeedGrade and premiere pro too, that problem is? not if you need to download something else, help please.

    Direct Link between Premiere Pro and Speedgrade is an new feature and only it presents in last CC version.

  • How i can download and trial  After Effects CC or cs5-6 medle east edition ??

    how i can download and trial  After Effects CC or cs5-6 medle east edition ??

    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Contribute:  CS5 | CS4, CS4
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Hi my names mark.I have the ipad 2 it's on ios 7.1 I had iOS 7.4 but it downgraded to iOS 7.1 is there any way I can upgrade to iOS 7.4 and the 3D effect is gone off my ipad

    Hi my names mark.I have the ipad 2 it's on ios 7.1 I had iOS 7.4 but it downgraded to iOS 7.1 is there any way I can upgrade to iOS 7.4 and the 3D effect is gone off my ipad

    There isn't an iOS 7.4 - there was a 7.0.4 (and 7.0.6), 7.1 is the current version.
    For the parallax effect, do you currently have Settings > General > Accessibility > Reduce Motion set 'on' ?

Maybe you are looking for