Speedgrade CC 2014.2 build 8.2x51 unsmooth/choppy 4K playback with GPU R9 295x2 - it uses only 2 GB of RAM (Windows 8.1 64Bit), Mac OS - same problem

Hello, guys
I have following configuration:
i7-5960x @ 4.3 GHz
32 GB DDR4 RAM
ATI 295x2 8GB (Gpusniffer.exe shows 3072 MB on each Hawaii unit)
M.2 Ultra Samsung XP941 (>1000Mb/sec)
Few 850 Pro SSD for H.264 4k source
Latest Speedgrade CC build at 16/02/2015 (DUAL MONITOR SETUP - 2560x1440 for Interface and 4096x2160 for Preview)
I work with a lot of short 10-15 seconds 4K 4096x2160 24FPS H.264 clips from Panasonic GH4. Import them to Premiere CC as is, some warp stabilization, cut them, save project and open in Speedgrade CC. Everything is fantastic smooth in Premiere CC.
In Speedgrade - some simple color correction - Exposition, some keyframes and the most simple grading for some material. I use GPU acceleration for sure to have full 4096x2160 4K 24FPS. But it is not responsive and smooth after some correction is applied. Everything is choppy and freezes first seconds, when I press "PLAY". I used Resources monitor, Task manager (Winodws 8.1 64-bit) and Afterburner. And there is what I found out:
Afterburner shows utilization of single GPU (as we know for playback only 1 GPU used) the same amount like in Premiere. Speedgrade CC uses 2,5GB VRAM. By the way, if I use some none-gpu-accelerated effect, like "transform", for example, imported from Premiere, I will get "Not enough GPU resources" message in Speedgrade. Afterburner shows, that Speedgrade CC tried to utilize more, then max. available VRAM 3GB during this moment. So I switch off such effects, before open project in Speedgrade.
Processor is also low on utilization (15%), maybe even a little lower, then in Premiere CC
Disk - 3-10%, H.264 is low on it
RAM !!! - is the problem. I allowed to use 29 GB of RAM to Adobe apps. Speedgrade CC uses not more, then 2-3 GB according to Taskmanager (mostly 2GB) and Resources Monitor of Windows 8.1 64Bit Pro. After I finished with color correction, opened project in Premiere CC, everything works smooth with lumteri on and! Premiere CC uses 9-10 GB of RAM to play the same clip at full resolution smoothly!!!
I already reinstalled everything, including drivers for GPU, Windows 8.1 and Adobe CC. Same result.
Macbook Pro Retina 15 late 2013 with i7-4960HQ/16gb RAM/Geforce 750m UPDATE!
Under Mac Os Yosemite 10.10.2 - same situation here. Premiere CC uses 5GB (of 11GB available) for 4096x2160 Prores 422 HQ and is usable, smooth with some frame drops.
Speedgrade CC uses 2,5 GB of RAM for 4096x2160 and it is impossible to use full 4096x2160. Only 1/2 Resolution for preview is smooth and usable at notebook display. At external 4096x2160 monitor connected through Thunderbolt it is much more choppy, I think it is hard for 750m with 2 GB of VRAM.
UPDATE! Previous version (CC 2014) of Premiere CC and Speedgrade CC under Windows 8.1 64-bit - same situation.
What do you think?
My opinion - Speedgrade CC is not optimized for 4K resolutions. Premiere CC is good for 4K.
btw, for information, latest AMD catalyst omega driver 14.12 has a problem with my R9 295x2 and Mercury Playback Engine (MPE) OpenCL - just the black screen with sound, when I turn on GPU acceleration. So I use previous 14.9 version. With 14.12 GPUsniffer.exe found one GPU device with 4Gb of VRAM and one GPU with 3GB of VRAM (normally must be 3GB+3GB for 295x2 Dual GPU-chip radeon).

So, I got MSI 290x 8GB tested and... found out that I can't use 8GB of VRAM, because there are some AMD driver limitations!!!
1. I switched off my 295x2 8Gb (4GB+4GB) to be sure, it will not affect VRAM amount.
2. I launched Gpusniffer utility with 14.9 AMD driver and 3072 Mb VRAM was available ONLY! It worked like 295x2 with 3072 + 3072 Mb VRAM.
3. I installed 14.12 AMD Omega driver and GPUsniffer informed that I have now 8192 Mb!!! But! Mercury Playback Engine did not work with Premiere Pro CC or Speedgrade CC as with my 295x2. Just black screen.
RGB and Luma at 0 and preview is black with 14.12 AMD driver. Premiere PRO - the same situation.
With 14.9 AMD Driver. Left 2560*1440 Dell working area monitor and 4096*2160 preview LG monitor right side.
With 14.9 Gpusniffer shows 3 and 3 and 3GB Vram instead of 4GB and 4GB and 8Gb. As I understood with CrossfireX switched off - Adobe products and their GPUsniffer utility could "find" and use 8GB on primary GPU, but again we can see AMD driver issues.
Single 290x 8GB with 14.9 AMD driver also displays only 3072 Mb available in Gpusniffer.
NEATVIDEO informed on their website in Bugs section about 14.12 driver problem with MPE. They also wrote about problem to AMD, so I did. I think, this is really bad story. So, AMD, we are awaiting for normal drivers.

Similar Messages

Choppy video playback with FCP 6 and 5D footage already converted to Apple ProRes 422

I am trying to edit a film I shot on the Canon 5D using FCP 6. I converted my raw files from the Canon 5D to Apple ProRes (HQ) .
But as I try to work on the timeline everything is super choppy and drops frames constantly. I am trying to sync audio as well and it's been impossible since the video in not playing properly.
I have read many post and did everything you say to do, but no luck.
I have chosen the unlimited RT and still dosent wanna play right.
I'm editing off a 1TB G-RAID drive. It currently has 200GB left of free space, so that shouldn't slow things down. My computer has a 500GB Internal Hard Drive and I currently have 250GB of internal free space. Here are the specification of my computer:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          18 GB
Bus Speed:          1.6 GHz
THis should be a powerful computer, at least thats what I tough when i got it. There has to be a solution to my frustration..please help!!!

Try transcoding to garden variety Pro Res for great quality, much smaller files, and less strain on your system.
Russ

Choppy video playback with FCP 6 and 5D footage already converted to Aplle ProRes 422

I am trying to edit a film I shot on the Canon 5D using FCP 6. I converted my raw files from the Canon 5D to Apple ProRes (HQ) .
But as I try to work on the timeline everything is super choppy and drops frames constantly. I am trying to sync audio as well and it's been impossible since the video in not playing properly.
I have read many post and did everything you say to do, but no luck.
I have chosen the unlimited RT and still dosent wanna play right.
I'm editing off a 1TB G-RAID drive. It currently has 200GB left of free space, so that shouldn't slow things down. My computer has a 500GB Internal Hard Drive and I currently have 250GB of internal free space. Here are the specification of my computer:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          18 GB
Bus Speed:          1.6 GHz
THis should be a powerful computer, at least thats what I tough when i got it. There has to be a solution to my frustration..please help!!!

You could have a problem with your external drive. Run diskutility: diskrepair and diskwarrior (if you've got it) on it Is it formatted macosextended?   You might run a drive speed test and see if the drive is running up to spec.
Try copying one file to your internal drive and see if that plays any better.
Have you tried deleting your fcp preferences? (get preference manager from www.digitalrebellion.com)
Are you just monitoring the video on the computer screen?
You might try resetting your window arrangement in fcp; window: arrange: standard and see if that makes a difference.
Is playback uneven on both viewer and canvas in fcp?
I'd go out and buy a 7200 Sata drive and install it internally and try playing off of that. MacPro's have 4 internal drive bays and it's extremely easy to install another drive.

Choppy video playback with airplay from Macbook Pro

I experience very choppy video using airplay towards my Airplay unit (3rd gen).
I am using a Macbook Pro (15" retina, late 2013 version) with these specifications:
- Intel Core i7 2.7 GHz.
- 16 GB ram.
- 768 GB flash/SSD.
...and so on. I have the Mavericks OS installed (10.9.1).
When I duplicate or extend the screen of the computer to my Apple TV it is chopping EXTREMELY much. I am not talking a little bit - but it is not even watchable. I thought that it could be the router itself as the connection is (probably, correct me if I am wrong anyone) is directed from the computer - to the router - and then to the Apple TV, which could make the router like a filter in the process. And if something would prevent the signal from reaching the Apple TV with "full speed" it could prevent the actuall image.
However, when I am using the iPhone 4S and streaming video (both video found in my phone as well as streamed TV from apps such as Magine.com) the image flows completely flawless. There are not even a touch of lagging. It flows perfect, just as watching a movie directly on the TV.
The networking hardware in the phone is slower than in the Macbook Pro retina (late 2013) - both for sending and recieving data. But still... my iPhone works better than the Macbook Pro for the Apple TV. Even though that the processing, memory, graphic and networking power is probably a thousand times faster in the computer... it still performs really bad.
I have followed some discussion threads here (https://discussions.apple.com/message/22051725#22051725 and https://discussions.apple.com/thread/5734226?tstart=0 just as a couple of examples). I have accessed my router (Netgear Gigabit EVG 2000) and increased the Wireless mode to "up to 270 Mbps. I have also followed the previously linked threads and disabled the WMM (in the QoS-section). I felt that this made a little bit of a difference...
...when I am mirroring the screen and scale down the resolution to match the AirPlay screen (full-HD, 1920 x 1080) it works okay, but still chops quite a bit almost all the time. But if I extend the screen and want to watch TV at the same time as I am doing something else on the computer - then it chops so that it is not even possible to watch.
This have to be something either with the Mavericks OS or with my network settings - can anyone help me...? It would mean A LOT!

Curious why you think it would be my network when the same network is being used by the iPad 3rd Gen and iPhone 5 and they both stream without issue. As far as the other items you mentioned, all devices are up-to-date with the latest firmware/software and the latest MacBooks do not have ethernet ports. Speedtests that I have conducted also indicate that bandwidth is not the issue as the results show that the speeds received from the router are quite impressive.

Choppy Music playback with other programs running

Have a question on Itunes 7 playback. I frequently play games (mainly WOW) with the sound on, but at a low level. I then run Itunes in the background at a high volume level so I can listen to music. My computer is high end and I never had any problems doing this before. Now that I have upgraded to 7 the music is very choppy if the game is sending any sound output to the sound card. As soon as i turn in game sound off, the music playback is fine. Any ideas besides reverting to 6?

Rolling back to 6 won't fix every thing, I rolled back..iTunes seams to work but programs that use to work using quicktime still have the jittery, jerky sound affects.
It was a Reason Ask DVD Video (uses QT.7 that ran fine up until iTunes 7 was installed) run the dvd and any narration gets screwed up when you roll over the application button rollovers, so it has basically stuffed up the system sound, then the video has a hard time trying to catchup.

Choppy Video Playback with new update 7.5.0.20

Well, here we go again. This latest itunes update is not up to snuff. My video playback has hit rock bottom.. And worst of all, my cpu usage is thru the roof. What the heck dude. You know, I talk to my buddies that own MACS, and of course they never have a problem with their freakin itunes. This has happened before, about a year ago. You can check the video reviews on Battlestar Galactica. I uninstalled and reinstalled, and NADA!!! Same ol' crappy playback. This was not an issue with the previous version. I even performed a system maintenace on my laptop just to make sure the CPU vents weren't clogged with dust. I know that Apple would prefer that the whole world owned a freakin MAC; but for Pete's sake, I am paying them to download content!!!!Paying!!!!!!! Give me something I can look forward to. Dread is what I feel everytime they announce one of their cute updates.

Me too. All I get is audio and a green screen when i try to play a video(that i *paid for* in some cases). I asked a question here a year ago and have yet to get an answer to!

Choppy YouTube Playback with MacBook and AirPort Express

I recently purchased a brand new 2.1 Ghz Intel Macbook (white) with extra memory and immediately connected it to the internet using the AirPort Express 802.11n. I have experienced no problems thus far except for extremely poor internet streaming video playback. YouTube videos stop to load every few seconds. I didn't have this problem with my old PowerBook G4, and like I said, everything else seems fine - pages load normally and downloads are very quick. I have installed a new version of Flash and done a couple of other suggested tricks but nothing seems to help. Any suggestions?

See http://discussions.apple.com/thread.jspa?threadID=309565&tstart=0

Choppy Video Playback with 3GS

I just purchased a 3GS and am having trouble with many of my videos. I have about 100 videos that all play fine on my 3G (and in iTunes), but when I try to play them through my 3GS, most of them freeze. Actually, the video plays for a few seconds and then freezes, while the audio keeps going. It never corrects itself. I tried restoring and re-syncing, but the problem stays. I also tried restoring and resyncing my old 3G to see if the problem is iTunes or the videos, but the 3G still works perfect.
Also, not every video has a problem, only about 50%. Anyone have any ideas?
Message was edited by: robneal81

robneal81 wrote:
I just purchased a 3GS and am having trouble with many of my videos. I have about 100 videos that all play fine on my 3G (and in iTunes), but when I try to play them through my 3GS, most of them freeze.
If these are videos you processed yourself, I've seen the same. Turns out there is new software with settings for the 3GS, so I suspect the change in video hardware from the 2G and 3G is the issue. I've reprocessed a couple of mine using a program called Videora video converter and then they work fine. YMMV.
BTW .. I'm the one who posted about the green bar.
Phil
Message was edited by: w7ox

SpeedGrade. Choppy EXR playback

We are having issues playing EXR's (B44) on our SpeedGrade systems... The playback is very choppy since it looks like it only buffers a couple frames at a time even when cache size is set to 80%. Once the sequence is fully buffered (played all the way through) it seems to play just fine the second time. Is there a setting I am missing to get it to roll through the sequence with no stoppage the first time? Is SpeedGrade converting these files to another format to RAM when caching? We have tested this on multiple machines and have seen the same problem on each.
The machine I am currently testing is a beast of a machine:
Xeon dual 16 core
124GB of RAM
8GB Quadro K5200 GPU
Windows 8
SpeedGrade CC (2014)
This should be more than enough power to handle this if it were a hardware issue. This leads me to believe it is a software issue... Does anyone know if SpeedGrade is capable of real-time playback of B44 EXR's? If so, what are we doing wrong? Oh, we also set up a RAM disk to rule out a hard drive bottleneck.
Any ideas would be appreciated! Thanks!

I've Done a lot of investigating into this and it is due to the way that the software team has implemented the decompress for exrs.
Currently I can cache uncompressed exrs in real time (24 + fps) and thus can watch a whole film in 1 go with no stutter. However this is not the case with any of the compressed exrs the max read speed i can get is 16 FPS
which suggests its to do with the decompressor .
It definitely not the hardware as on the same machine with RV i can get 24 fps+ with the same compressed files.
This has always been a problem since the Iridas Days I'm betting no one has looked that code block for loading exrs for years ( if it ain't broke, don't fix it)
More and More footage is coming through in HDR file types and exr is very popular in the VFX industry ... it would be well worth the software team sorting this out as more and more team i know are using RV as there main player now and this will start pushing them into the autodesk eco-system for solutions.
It would be interesting to see what the software teams view is on this
Robin

Speedgrade cc 2014 color wheel not showing an outer ring

This is probably a very basic question but how do you get the outer rings of the color wheels in speedgrade cc 2014 to appear?

Thanks for that. If I were running the Adobe code shop, the speed grade team would have received an "Aw ****". They fixed something that wasn't broke and in the process they broke it. In that now all the documentation and training videos are wrong. What is even more perplexing is that in their interface they have two other methods for doing the same thing. They could have created the new method and kept the old method for backwards compatibility. Instead of having to explain the loss of a well understood interface to existing loyal users, they could have presented a new choice.
That software development team needs to go back to the bush league. They made a newbie mistake.

Speedgrade CC 2014 becoming increasingly slow while working on a project that was direct linked from Premiere CC.

Speedgrade CC 2014 direct link from Premiere Pro CC 2014. The application is becoming increasingly slow when making any adjustment or just selecting any buttons on screen. While working for and hour on my project it is now bordering unresponsive. In addition it is causing the Finder to become slow and any other applications such as Safari and Mail.
I'm on a Mac Pro5,1 OS 10.8.5, 6-core intel xeon 2.93GHz, 16gb Ram, Ati Radeon HD 5770 and NVIDEA Quadro 4000 cards.
I'm hoping this is just a setting in speed grade and not a bug.

First, Davinci and the Adobe DVA's (digital video apps) utilize resources very differently from each other. That said, your hardware is making me green ...
This is something that should fly on your system, so ... I would definitely suggest my previous thing of running that benchmark testing ... it will tell you how your system runs the Adobe stuff, and indicate if anything could be modified so it would work better. Some people with FAR less a system than you're running fly through a DL session. Even my system with only four "real" cores (8 "logical" ones ... whatever ... ), 16Gb RAM, and a GTX770/4Gb vRAM and multiple internal & eSATA drives to split things up for throughput sustained stuff, has been running pretty smoothly. Even though it wasn't using much of the video card, which screams for many people in the Adobe DVA's. This latest set of improvements has pretty much nearly eliminated Sg using it ... so we'll have to puzzle out WHAT is causing Sg and the other apps to ignore my card when in identical setups it's a real beast.
That's the kind of thing that can drive the engineers up the wall. Some of the systems that have had terrible problems such that users have been on here complaining that "no on could possibly be running "serious professional footage & effects" on a system like theirs, didn't you idiots test it?" ... have received the response ... that Kevin or Al or someone is running a completely identical system to almost all tiny respects ... and is flying with 6k footage running a ton of PrPro & Ae effects then worked heavy in Sg. And coasting at it. Not that they at all challenge that the user's system is nearly unusable at the moment ... but figuring out why on two nearly identical setups it works so differently can be rather tedious with hundreds of thousands of lines of code involved, various plugins, and maybe a 2/3rds moon on the third Tuesday.
Like mine. I know quite a few people use this card on the Adobe apps and it's really flying for them. It's been re-installed twice on mine, Windows and all monitoring systems see it fine, but ... even after multiple installs and CC cleaner attempts and such it's not "seen" properly by any Adobe app. So ... off to run the benchmark to see what all in my system is doing fine ... and if there's any hint as to why that card isn't getting used.
Also ... it would maybe be useful to get Dennis Weinmann or Fran Roig to jump in, maybe get a sample of your project file or info on those LUT's or something, to see if they've got any ideas. Trouble is most of Adobe's staff is on Winter Break for the next week plus.
Neil

New Install SpeedGrade CC 2014.2 has stopped working

Fresh install of SG CC 2014.2 will not launch. Getting a windows message that Adobe SpeedGrade CC 2014.2 has stopped working.
And here is some babble from a log as well. I did uninstall and re-install with same results.
Log Name:      Application
Source:        Windows Error Reporting
Date:          2/3/2015 9:22:44 AM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      WW-89ZMPS1
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: SpeedGrade.exe
P2: 8.2.0.0
P3: 54887476
P4: StackHash_bc93
P5: 6.1.7601.18247
P6: 521eaf24
P7: c0000374
P8: 00000000000c4102
P9:
P10:
Attached files:
These files may be available here:
C:\Users\ERAU\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_SpeedGrade.exe_26 3c706b176174d9bf213c6ba7bc43c2d6a727b4_0757e3c9
Analysis symbol:
Rechecking for solution: 0
Report Id: d36290a9-abc0-11e4-b56c-d4bed9a7445d
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-03T16:22:44.000000000Z" />
    <EventRecordID>138000</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WW-89ZMPS1</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>SpeedGrade.exe</Data>
    <Data>8.2.0.0</Data>
    <Data>54887476</Data>
    <Data>StackHash_bc93</Data>
    <Data>6.1.7601.18247</Data>
    <Data>521eaf24</Data>
    <Data>c0000374</Data>
    <Data>00000000000c4102</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Users\ERAU\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_SpeedGrade .exe_263c706b176174d9bf213c6ba7bc43c2d6a727b4_0757e3c9</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>d36290a9-abc0-11e4-b56c-d4bed9a7445d</Data>
    <Data>0</Data>
</EventData>
</Event>

R Neil,
Thank you for the two suggestions.
Unfortunately the issue remains even after running CC Cleaner on SG and reinstalling. Still getting the SG had stopped working.
Here is what event viewer reads:
Log Name:      Application
Source:        Application Error
Date:          2/5/2015 8:33:03 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      WW-89ZMPS1
Description:
Faulting application name: SpeedGrade.exe, version: 8.2.0.0, time stamp: 0x54887476
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x16dc
Faulting application start time: 0x01d0415905530e2f
Faulting application path: C:\Program Files\Adobe\Adobe SpeedGrade CC 2014\SpeedGrade.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: 456ce037-ad4c-11e4-b0ca-d4bed9a7445d
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-05T15:33:03.000000000Z" />
    <EventRecordID>139750</EventRecordID>
    <Channel>Application</Channel>
    <Computer>WW-89ZMPS1</Computer>
    <Security />
</System>
<EventData>
    <Data>SpeedGrade.exe</Data>
    <Data>8.2.0.0</Data>
    <Data>54887476</Data>
    <Data>ntdll.dll</Data>
    <Data>6.1.7601.18247</Data>
    <Data>521eaf24</Data>
    <Data>c0000374</Data>
    <Data>00000000000c4102</Data>
    <Data>16dc</Data>
    <Data>01d0415905530e2f</Data>
    <Data>C:\Program Files\Adobe\Adobe SpeedGrade CC 2014\SpeedGrade.exe</Data>
    <Data>C:\windows\SYSTEM32\ntdll.dll</Data>
    <Data>456ce037-ad4c-11e4-b0ca-d4bed9a7445d</Data>
</EventData>
</Event>

Speedgrade cc 2014 keeps crashing after I direct link from Premier cc 2014 -

Any body has faced this problem and been able to resolve it?
Don't know how to fix this - on a deadline - any help?
I tried reinstalling speedgrade but it does exactly the same thing.

-I am using Premiere Pro cc 2014 - I’m trying to direct link a project to Speedgrade cc 2014 - but Speedgrade keeps crashing when I do it.
-Both programs are up to date
- I’m using operating system Mac OSX V10.9.4
- My source footage is H.264 in a .mov, Linear PCM, Timecode
- I don’t get any error message, Just Speedgrade Quit unexpectedly
- When the problem occurs I am trying to open a sequence from Premier pro cc 2014
- It has never worked before on this versions - It did on Speedgrade cc and Premiere Pro cc
- I’ve tried it just running both programs
- I have no third party codecs installed
- I have Processor 1.7 GHz Intel Core i7 - Memory 8 GB 1600 MHz DDR3 - Graphics Intel HD Graphics 5000 -
- I am not using Mercury Playback Engine GPU Acceleration
- The problem happens when I try to work on the sequence I linked from Premiere cc 2014

Impossible d'ouvrir speedgrade CC 2014

Bonjour,
Depuis le téléchargement de la version cloud 2014, impossible d'exporter mes projets Premiere Pro CC 2014 dans SpeedGrade CC 2014... Il m'est également impossible d'ouvrir simplement SpeedGrade CC 2014.
Quelqu'un a-t-il le même problème ou quelqu'un sait d'où cela peut provenir??
Merci d'avance
Julien

Pour determiner s'il y'a un problème dans votre profil d'utilisateur, je suggère de créer un nouvel compte local et lancer Photoshop le dans pour tester:
Créer un compte d’utilisateur - Aide de Windows

[解決事例]Photoshop CC 2014「Windows 8.1 64bit環境スキャナーから読み込むには」

【製品】
Photoshop CC 2014
【環境】
Windows 8.1 64bit
【問い合わせ内容（お客様の目的）】
スキャナーから読み込みたい
Canonに問い合わせたところ、Adobe側でプラグインがあるはずだといわれた。
【対応内容】
TWAINプラグインは64bitには対応しておりません。
Photoshop CCもしくはCS6の32bit版の場合、TWAINプラグインをインストールすることが可能です。
Creative Cloudデスクトップアプリケーションから以前のバージョンをインストールし、プラグインファイルをコピー&ペーストすることで、スキャナが使用可能になります。
＜参考リンク＞
TWAIN プラグインの使用について（Photoshop CS4/CS5/CS6）
◆この内容で解決できましたか？　解決出来ない場合は、Photoshop (Japan)　へ戻って質問しましょう！

I also began to install the new Lightroom CC (2015) and updated Photoshop 2014 to version 2014 2.2 (64bit) and Bridge.to 6.1.0.116 x64 all from the Creative Cloud Apps. I had things to do and when I came back, Lightroom had installed, with a new icon just called Lightroom and Photoshop and Bridge had failed to complete the download, according to creative Cloud. I tried everything I could think of to get them to finish the download and got a message saying that bridge was corrupt and nothing at all for Photoshop.
In desperation I restarted my computer and opened Creative Cloud and the downloads started again! They eventually installed with no help from me and now work properly. When you open the new Lightroom it prompts you to let it build a new catalogue. No problem other than you now have two versions of Lightroom, one identified as v5.7.1 64-bit, the other just as Lightroom. You then have to rename the icon to CC (2015).
Basically, some of these updates are a pain with many problems. Looking for information on problems can take forever. Getting help is such a time waster and some of the live help personnel do not seem to be very well trained. The whole Photoshop system seems to have got way too big to be easily handled. It needs to be reorganized. [End of rant]

Speedgrade CC 2014.2 build 8.2x51 unsmooth/choppy 4K playback with GPU R9 295x2 - it uses only 2 GB of RAM (Windows 8.1 64Bit), Mac OS - same problem

Similar Messages

Maybe you are looking for