Speedgrade CC always creates keyframe for 3D geometry modification

Even though I have Auto Keyframe Creation disabled, every time I modify a stereo clip's geometry, a new keyframe is created at the playhead. Any idea how to stop this???

Similar Messages

How to create presets for Keyframes in Adobe Premire Pro CC?

Dear Users,
I´m working on a Clip with more than one Video inside. I want to have one video in the back and the other Video on the right lower side (Picture in Picture).
Sometimes the right one should move to full screen and after a few seconds it should go back to the lower right again. This action
will be repeat many times in the complet movie, so I have to create keyframes for the movement (right to full screen / full screen to lower right).
All the time I have to copy the needed Keyframes and have to paste them on the new direction, but this needs many time.
So my question: Is it possible to make presets for the keyframe actions? Means, if I reach a position where I need the action
"right to full screen" I have to klick only one Preset Button and the keyframes will be added at this position!
Hope there is a possibility.
Best regards and sorry for my bad english!

Hello,
You can try the following work around with composition:-
1) Add a you tube video to the page.
2) Drag the video to the target of composition widget.
3) Resize the video to have the size of the target.
The triggers can have the images related to the videos so as to act as thumbnails for videos.
Regards,
Neha

When I try to simply add a few photos (from Events) into a newly created Album, it always creates a Folder for the photos to go into. I don't need a Folder. I just need the photos to go into the Album. What am I doing wrong?

When I try to simply add a few photos (from Events) into a newly created Album, it always creates a new Folder - a sub folder to the new Album I just created - for the photos to go into. I don't need a Folder! I just need the photos to add into the Album. What am I doing wrong?

Sometimes it takes a precise drop to get it into the album. Make sure you see the album highlighted before releasing the mouse:
OT

When creating keyframes on timeline, why does it sometimes add bezier handles and sometimes not?

OK, so one of the key steps in my workflow is to do a pass of manual audio 'normalization'. Yeah, I keep getting the feeling that there might be automated tools that could do a better job, but I'm also listening for content.
But what is driving me a little crazy right now is that sometimes, the ctrl-click adds a normal keyframe and other times, it adds a control handle for a bezier curve. This is especially frequent when doing speed ramps, but it's just so inconsistent that it drives me nuts.
I am working on one timeline and halfway through the sequence, it comes to a clip where it ALWAYS adds bezier curves. And when I try to drag the keyframe down, it grabs the bezier handle instead, creating this bizarre S curve.
I just don't know what I'm doing differently in that segment compared to other places. Hundreds, if not thousands of edits like this and I haven't come across a problem like this.
Undo, and do it again causes the same thing.
But one segment over, creating keyframes doesn't create any bezier handles.
Production Premium CS6

This is helpful as it explains why suddenly there are a few in a row that are bezier.
But it doesn't explain what it is that I did to make them bezier in the first place. It just seems random. I'm just control-clicking on the timeline.
When I get back in the office, I'll check on this a bit more carefully.

Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings...never did really. Also JAVA now refuses to create updates for WinXP/FireFox.

I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
" seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
Group Location
Network Advertising Initiative United States
Digital Advertising Alliance (DAA) United States
European Digital Advertising Alliance Europe
Digital Advertising Alliance of Canada Canada
....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
...I clicked PROTECT MY CHOICES and downloaded the app.
These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
This has been going on forever for me - I've been reporting this malfunction since 2013.
Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
We can no longer just "DELETE ALL COOKIES".
PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
In summary:
1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
Thanks so much!

hello, palemoon's support forums are here: http://forum.palemoon.org/

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

Error while creating rules for Event generator

Hi,
I followed the PO samples in dev2dev site to create an EventGenerator(both file and JMS) from a jython script. While creating rules for the eventgenerator, am getting the following exception.
"AttributeError: 'None' object has no attribute 'newFileEventGenConfigurationMBean'"
here is the PO sample code,
egCfgMBean = getMBean("FileEventGenerators/FileEventGenerators")
egMBean = egCfgMBean.newFileEventGenConfigurationMBean(egName)
I used getMBean() instead of wlst.getTarget() to retrieve the MBean info.
The server is weblogic 9.2 and domain is Integration domain. Looks like the getMBean() wasnt able to locate the Eventgenerator MBean for some reason and hence the variable 'egCfgMBean ' is always null. Anyone had this issue before.
Thanks.

It looks like getMBean("FileEventGenerators/FileEventGenerators") is not
returning an MBean. "None" is returned if no MBean is found. Check the path
parameter to getMBean() and make sure it is correct. If you know the object
name of the MBean you are interested in, you may be able to use the
getPath() command to get its path.
wls:/mydomain/serverConfig>path=getPath('com.bea:Name=myserver,Type=Server')
wls:/mydomain/serverConfig> print path
<Ramesh R> wrote in message news:[email protected]..
Hi,
I followed the PO samples in dev2dev site to create an EventGenerator(both
file and JMS) from a jython script. While creating rules for the
eventgenerator, am getting the following exception.
"AttributeError: 'None' object has no attribute
'newFileEventGenConfigurationMBean'"
here is the PO sample code,
egCfgMBean = getMBean("FileEventGenerators/FileEventGenerators")
egMBean = egCfgMBean.newFileEventGenConfigurationMBean(egName)
I used getMBean() instead of wlst.getTarget() to retrieve the MBean info.
The server is weblogic 9.2 and domain is Integration domain. Looks like the
getMBean() wasnt able to locate the Eventgenerator MBean for some reason and
hence the variable 'egCfgMBean ' is always null. Anyone had this issue
before.
Thanks.

Oracle Coherence 3.7.1, It's always creating a new cluster in linux m/c.

Hi ,
I am facing an issue with Oracle Coherence 3.7.1 in linux m/c , where it’s always creating a new cluster, even if I start a new member provided with same cluster name as argument. -Dtangosol.coherence.cluster=name
It’s not joining the existing cluster , it’s always creating a new cluster with same name in Linux m/c.
But when I tried the same thing in windows m/c , it working fine , even If I start N number cache server’s it joining the same cluster as one more member.
Please someone help me, why it’s always creating a new cluster in linux m/c with same name ? why new VM’s are not joining the existing cluster? , Is there anything extra setup I need to do for Linux m/c.
Thanks in Advance.
<coherence>
<cluster-config>
<member-identity>
<cluster-name>My_cluster</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value system-property="tangosol.coherence.cacheconfig">coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
</coherence>
12-10-01 10:20:06.544/0.420 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2012-10-01 10:20:06.608/0.484 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2012-10-01 10:20:06.609/0.485 Oracle Coherence 3.7.1.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/data/Informatica/nas/sdgshared/MyApputils/coherence/MyAppCache/lib/MyAppCoherenceCache.jar!/tangosol-coherence-override.xml"
2012-10-01 10:20:06.613/0.489 Oracle Coherence 3.7.1.0 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.7.1.0 Build 27797
Grid Edition: Development mode
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
2012-10-01 10:20:06.831/0.707 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=n/a): Loaded cache configuration from "file:/data/Informatica/nas/sdgshared/MyApputils/coherence/MyAppCache/config/coherence-cache-config.xml"; this document does not refer to any schema definition and has not been validated.
2012-10-01 10:20:07.328/1.204 Oracle Coherence GE 3.7.1.0 <D4> (thread=main, member=n/a): TCMP bound to /10.176.4.105:8088 using SystemSocketProvider
2012-10-01 10:20:10.711/4.587 Oracle Coherence GE 3.7.1.0 <Info> (thread=Cluster, member=n/a): Created a new cluster "MyCache_cluster" with Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=16, SocketCount=4) UID=0x0AB004690000013A1CE9ADE5AD531F98
2012-10-01 10:20:10.713/4.589 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=n/a): Started cluster Name=MyCache_cluster
Group{Address=224.3.7.0, Port=37000, TTL=4}
MasterMemberSet(
ThisMember=Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
OldestMember=Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=1
Member(Id=1, Timestamp=2012-10-01 10:20:07.397, Address=10.176.4.105:8088, MachineId=44371, Location=site:,machine:ctrel9014-12,process:19922, Role=CoherenceServer)
MemberId|ServiceVersion|ServiceJoined|MemberState
1|3.7.1|2012-10-01 10:20:10.711|JOINED
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0
TcpRing{Connections=[]}
IpMonitor{AddressListSize=0}
2012-10-01 10:20:10.736/4.612 Oracle Coherence GE 3.7.1.0 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2012-10-01 10:20:10.918/4.794 Oracle Coherence GE 3.7.1.0 <D5> (thread=DistributedCache:HBaseMyCache, member=1): Service HBaseMyCache joined the cluster with senior service member 1
2012-10-01 10:20:10.942/4.818 Oracle Coherence GE 3.7.1.0 <Info> (thread=main, member=1):
Edited by: user10092089 on Oct 2, 2012 8:35 AM

Hi,
For unicast, you need to define the override file as under:
<?xml version='1.0'?>
<coherence>
     <cluster-config>
          <member-identity>
               <cluster-name system-property="tangosol.coherence.cluster">LPACache_cluster</cluster-name>
          </member-identity>
          <unicast-listener>
              <well-known-addresses>
               <socket-address id="1">
                   <address system-property="tangosol.coherence.wka1">coherence-node1-ip</address>
                   <port system-property="tangosol.coherence.wka1.port"> coherence-node1-port</port>
               </socket-address>
               <socket-address id="2">
                   <address system-property="tangosol.coherence.wka2"> coherence-node2-ip </address>
                   <port system-property="tangosol.coherence.wka2.port"> coherence-node2-port</port>
               </socket-address>
              </well-known-addresses>
          <port-auto-adjust system-property="tangosol.coherence.localport.adjust">false</port-auto-adjust>
          </unicast-listener>
     </cluster-config>
     <configurable-cache-factory-config>
           <class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
           <init-params>
              <init-param>
                  <param-type>java.lang.String</param-type>
                  <param-value system-property="tangosol.coherence.cacheconfig">coherence-cache-config.xml</param-value>
              </init-param>
          </init-params>
    </configurable-cache-factory-config>
    <logging-config>
           <severity-level system-property="tangosol.coherence.log.level">5</severity-level>
           <character-limit system-property="tangosol.coherence.log.limit">0</character-limit>
    </logging-config>
</coherence>Use the property -Dtangosol.coherence.localhost=coherence-node1-ip and -Dtangosol.coherence.localport=coherence-node1-port for coherence server1 and -Dtangosol.coherence.localhost=coherence-node2-ip and -Dtangosol.coherence.localport=coherence-node2-port for Coherence server 2. Once you start the servers with these changes, you should not see the below message:
Group{Address=224.3.7.0, Port=37000, TTL=4}
HTH
Cheers,
_NJ

Bridge Image Processor always creates JPEG or TIFF folder, how do I change that behavior?

I have searched the web, Bridge forums, and Photoshop forums, and come up empty-handed. (The strange thing is, I know there used to be a post that answered this question a few years ago.) Anyway, I use Image Processor quite a bit, and it works great except for the annoying behavior of always creating a new folder to store the newly-created images.
I remember the solution is to change some line in a (XML?) file from "JPEG" to "". For the life of me, I can't find which file that is! I think it used to located down inside Application Support. I think.
Thanks for help on this, it's driving me crazy!
Jeff

Thanks for replying! I'm running CS 5.1. Oh, now I see...I've never run Image Processor from within Photoshop, just from Bridge. You're right, it does offer different options than Bridge.
Anyway, I found it what I was looking for.
Open up (don't run!) the Image Processor.jsx file. I opened it up in ExtendScript Toolkit. The path is /Applications/Adobe Photoshop CS5.1/Presets/Scripts/Image Processor.jsx
I'm on line 1574 (in other versions, the line number may vary)
This is what the line says:
var subFolderText = inFolderLocation + "/JPEG/";
Change to:
var subFolderText = inFolderLocation + "//";
Problem solved. Repeat as necessary for other folders you don't want created (TIFF, PSD)
Back to work!

RFC function module always creating BPs with the same user name (RFC user )

Hi All
I posted the below question in a different area before. But thought it would be more suitable here.
Moderators - Please let me know if am doing any mistake.
Question:
I have a RFC function module in CRM that creates Business Partners in ECC (XD01 tcode).
I am using a dialog RFC destination configured in SM59 in CRM.
But my RFC function module in CRM is always creating the Business Partners in ECC with the RFC user id (the user that we maintain for the RFC destination in SM59).
This is a problem for the users because they are not able to track the actual person responsible for creating these Business Partners.
Can somebody please let me know how to solve this problem?
Thanks
Raj

Hi.
You may use the trust relationship between CRM and R/3 and in SM59 instead of set a specific username, you set the flag "current user".
With this flag, the system will access R/3 system with the user logged in CRM system. The Trust relationship must be created between CRM and R/3 in order to the system doesn't ask for a password to login in R/3.
If you need more details please reply.
Kind regards,
Susana Messias

Problem in creating template for the accounting transactions

Hi,
suppose for making an entry through fb50 we have to enter g/l a/c no. in that particular field but if some one does not want his end user to make an entry to this field other than putting an entry through his end user he wants system to take the required g/l a/c by default is it possible by creating template for that particular postings? if yes how to generate the template? i have tried to make a template through the recurring entries but not succeeded in that , so please help me.
Thanking You
santosh rothe
9421542585

You can create a template with a particular account code string from within FB50.
Make sure you have the tree turned on (Tree On/ Tree Off button toggles display).
Once you have entered the standard coding, right click on the Account Assignment Template folder to get a popup menu. Select "Save Account Assignment Template". A dialog box will ask you to name the template.
You can then instruct users to use this template to record this type of transaction.
However, this does not prevent the user from doing direct entry or changing account code strings. If you have a situation where for a particular combination of accounting elements, whether header or detail, for which the GL should always be a particular value, you can create a substitution rule in IMG which will automatically populate the GL field with the specific GL account value. The IMG transaction is OBBH.

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

You kind of answered your own question..
Check out Motion in the FX Control Window and learn how keyframing works..

StoreEvents always creating new event?

Hey all,
Our university recently upgraded to the newest version of the calendar server and so I've been going back to some old code I wrote that should now function correctly. However, I'm having an issue. The part of my program I'm currently dealing with fetches all the unconfirmed appointments from a user's oracle calendar and then asks the user if they would like to accept/decline/ignore those events. It then writes the events back to the server accordingly. However, despite my best efforts, a new appointment is always created rather than the old one being updated to reflect the new participation status.
Here is an example of an event received from the server:
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ORACLE//NONSGML CSDK 9.0.4.2//EN
BEGIN:VEVENT
X-ORACLE-IMEETING-SENDEMAILNOTIFICATION:TRUE
X-ORACLE-EVENTINSTANCE-GUID:I1+611984+101+1+445722372
X-ORACLE-EVENT-GUID:E1+611984+101+445722372
X-ORACLE-EVENTTYPE:APPOINTMENT
UID:20050214T194612Z-95690-65-589f-Oracle
TRANSP:OPAQUE
SUMMARY:Unconfirmed Number 1
STATUS:CONFIRMED
SEQUENCE:0
PRIORITY:5
ORGANIZER;CN=Derek Miller:mailto:[email protected]
DTSTART:20050214T170000Z
DTSTAMP:20050221T192636Z
DTEND:20050214T173000Z
CREATED:20050214T194612Z
CLASS:PUBLIC
ATTENDEE;CUTYPE=INDIVIDUAL;RSVP=FALSE;CN=Derek Miller;PARTSTAT=NEEDS-ACTIO
N:mailto:[email protected]
END:VEVENT
END:VCALENDAR
And here is what I send back to the server:
Content-Class: urn:content-classes:calendarmessage
Content-Type:text/calendar;
method=REQUEST;
charset="utf-8"
Content-Transfer-Encoding: 7bit
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ORACLE//NONSGML CSDK 9.0.4.2//EN
BEGIN:VEVENT
X-ORACLE-IMEETING-SENDEMAILNOTIFICATION:TRUE
X-ORACLE-EVENTINSTANCE-GUID:I1+611984+101+1+445722372
X-ORACLE-EVENT-GUID:E1+611984+101+445722372
X-ORACLE-EVENTTYPE:APPOINTMENT
UID:20050214T194612Z-95690-65-589f-Oracle
TRANSP:OPAQUE
SUMMARY:Unconfirmed Number 1
STATUS:CONFIRMED
SEQUENCE:0
PRIORITY:5
ORGANIZER;CN=Derek Miller:mailto:[email protected]
DTSTART:20050214T170000Z
DTSTAMP:20050221T192636Z
DTEND:20050214T173000Z
CREATED:20050214T194612Z
CLASS:PUBLIC
ATTENDEE;CUTYPE=INDIVIDUAL;RSVP=FALSE;CN=Derek Miller;PARTSTAT=ACCEPTED:mailto:[email protected]
END:VEVENT
END:VCALENDAR
The only thing that I see that could be different is that when I fetch the event from the server, there are some strange line breaks in the attendee property which somehow magically disappear in my processing of the string (my function only swaps the NEEDS-ACTION with ACCEPTED so I don't know how those other line breaks go away). But the fact that a new event is created and all the properties are set correctly, I have my doubts as to this being the cause.
Also, I have tried both the CAPI_FLAG_STORE_MODPROPS and CSDK_FLAG_STORE_MODIFY flags but neither seem to change what happens.
Anyone see any obvious mistakes that I'm making?
Thanks in advance!

Glad to be of help! I wouldn't have known either except for a forum thread a few pages back titled "jni source code available" (or something like that) where one of the replies stated that the CSDK and CAPI handled the UIDs differently. Then I compiled the C example and noticed the UIDs looked very different from the ones I was getting from the Java SDK. Then I used your original post to help figure out what I needed to send back to the server (other than the UID) to get my code to work... so we kind of helped each other! Thanks!
--Ron D.

Create user for CPS in _ UPPER CASE LETTERS _ if using JSM on SolMan

only create users for CPS in UPPER CASE LETTERS if using JSM on SolMan
Dear CPS Admins,
If you plan to use Job Scheduling Management (JSM) on SAP Solution Manager together with CPS by Redwood please always create any users in CPS only with upper case letters to avoid issues in the communication between SolMan and CPS.
The user creation for CPS is done in the UME (Java user administration, alias /useradmin).
Actually the CPS user itself is only created in CPS during the first logon.
Both CPS and the Java UME are case sensitive. So you can create users in uppercase, lowercase or mixed letters. But of course the system does still not allow duplicate names. So you can either create MUELLERP, MuellerP or muellerp - but not multiple of them.
Now, if the SolMan communicates with CPS for Job Scheduling, the actual user name is taken in some kind of a "trusted RFC like" way and checked on the CPS system connected to the SolMan. If the current SAP user does not exist on CPS no activities are possible, neither in read mode (read existing CPS jobs) nor in write mode (change existing jobs or create new ones).
Unfortunately the Solution Manager transmits the current user name to CPS only in upper case letter. So if the CPS user was not created in UPPERCASE letters in CPS the communication will fail. Therefore, think about creating CPS users in UME only in UPPERCASE letters. Changing this later is difficult to impossible.
Best regards,
Peter

hi,
I tried to reproduce your issue but I was not able to create a UME user with lower case letters.
UME automatically converted the user name into upper case after saving. So even if I enter "cps" as user name UME stored the user name as "CPS".
(maybe that happend because of the existing SU01-UME integration in our SolMan system)
If UME would be case sensitive I would expect that it is possible to create the user "CPS", "cPs" and "cps".
Regarding the SolMan-CPS connectivity:
Transaction SU01 allows only upper case letters (in user name and alias). Since you're starting from an ABAP system only user names with upper case letters are supported. It's a technical constraint of the ABAP user management that user names consist of upper case letters only.
Kind regards,
Martin

Address Book always chooses 5th for birthdate to display

Hi,
I use MobileMe to sync my iMac at home and my MBP at work, as well as my iPhone. All work fine, except recently the MBP. In the Address Book for it, when I type a birth date for a contact, regardless of what I type, the day portion of the field always becomes 05 (i.e. 5th) when I leave the field and/or finish editing the contact. The month and year info is correct and remains what I type it to be, but the day does not. If I click back in the field, it shows the day I typed but if I click out of it again, it goes back to the 5th. MobileMe, the iMac and iPhone all display the correct day in all cases but the MBP shows every contact with a birthday to be the 5th, although month and year are correct. Has this happened to anyone else and/or does anyone have any suggestions? Thanks!

hmm, just to completely eliminate syncing problem turn off syncing on that computer and reset the sync folder. make sure AB is not running at the time.
http://support.apple.com/kb/TS1627
then delete the AB database file again, start AB and and see if it works. also, do the dates display correctly in finder when you view modified and created times for files?

Speedgrade CC always creates keyframe for 3D geometry modification

Similar Messages

Maybe you are looking for