Speedgrade cc not reading avi timecode from avi created by premiere cc

timecode is selected to alwayas read. Quicktime works, why not avi?

Yes, is true, SpeedGrade doesn't read avi timecode. I don't understand why not

Similar Messages

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

My program does not read raw files from mark III

My program does not read raw files from mark III

emac77,
Support for Canon 5D MIII RAW files was announced in ACR 7.1 (Adobe Camera Raw 7.1).
The current stable release is ACR 7.2 while ACR 7.3 is still a Release Candidate (Beta).
Starting ACR 7.2, Adobe stopped supplying a manual download link which was available till 7.1. Adobe Application Manager (AAM) is the only way for you to update to ACR 7.2.
However, here is a direct download link that AAM connects to for the download that you can use to grab the .zip or .dmg (Mac) file. Download and install. See if you're able to open your files then.
ACR 7.2 for Windows: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
ACR 7.2 for Mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
-ST

My n82 is not reading my pictures from card

hy, I have a nokia n82, everything is working just fine, but this phone is not reading my picters from card, not even one of theme, pictures from phone memory are opened.
Everything else is working from card, music, videos, office doc., pictures...no. can anyone help me? maybe i did something wrong...a setup or something?????

babdi, I think the hard reset is not the solution to ALL problems let's first try some things before recommending doing hard resets for all problems.
in this case the likely problem is a corruption with the Gallery database in the Memory card. But it's hard to pin down.
There are several things to try I wouldn't keep doing RESETs of the device as you may not solve the problem and you are wiping all your settings, and files.
The problem is either in the \private folder in the Memory Card or some other file in the \sys or \system folders there.
You can try deleting some folders or backing up YOUR files from the memory card then re-formatting. Just don't make a copy of ALL the contents from the memory card, only the files you put there. The other files will/should be recreated automatically.
640K Should be enough for everybody
El_Loco Nokia Video Blog

My Phone 4's is not reading my touch from the screen in certain places

My Phone 4's is not reading my touch from the screen I when I pus numbers It give no response but a little Higher or lower and it reads?

Dear Friend,
Sounds like your idevice has some cover film on the screen surface. Try to replace it for a new one.
Hope it helps

"Not Read" receipt received from sender for all emails sent.

We recently migrated from Exchange 2010 to Exchange 2013 and I've got one user that started having a strange problem after the migration. She has Outlook set to request a read receipt for all emails that she sends and that works fine except that
for every email she sends, she gets a "Not Read" receipt back and this not read receipt comes from her as if she sent the email to herself and didn't read it. She also get the not read receipt if she deletes emails that are in her sent box
and again, the not read receipt comes from her.
This user is using Outlook 2007 SP3 with all available updates installed. We've tried a new profile and we've also tried on a different computer with the same results. She doesn't have any rules set up except for the one for clearing categories
that I believe is a default rule. I've checked the settings of the rule and there is nothing there that would be causing this. The other strange thing is that these not read receipts seem to come in batches. If she sends one email the the
not read receipt doesn't show up or at least not immediately. If she sends 2 or 3 messages then she'll get all of the not read receipts for those 2 or 3 messages at the same time.

Hi
Please check this thread
http://social.technet.microsoft.com/Forums/en-US/2dbf0122-8d63-4375-91b4-6ba2cf52ed2e/not-read-receipt-to-senders
Tell the senders to stop sending messages with read receipts and it wont be a problem
And to To determine the problem, Please test the feature on local side to check whether the symptom occurs. Meanwhile, you can let the sender in remote domain send message to other domain to
check the result.
Cheers
Zi Feng
TechNet Community Support

Photoshop CS4 will not read Raw files from Nikon D60. [was: No automatic updates for my PS CS 4 on windows (for reading .Nef files)?]

Hi
I have been using PS CS4 for several years.
Yesterday, I went to PS CS4 help and selected "updates", but I get the message "There are not updates available at this time; Please note that some updates for the following products cannot be determined at this time: Adobe Updater".
I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
any idea, please?
thanks

I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
The Nikon D60 was first supported in Adobe Camera Raw 4.4.
Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

9926 do not read AutoUnattend.xml from USB Key

I had used a USB Key with an Autounattend.xml answer file from Windows Vista, Windows 7, Windows 8 until Windows 10 version 9979 without no problem.
9926 do not read at all AutoUnattend.XML.
I am interestind to know if somobody else had tried to deploy 9926 with an AutoUnattend.xml file ?

Thank you for your answer.
Here is my setupact.log and AutoUnattend.xml who work OK with all other versions of Windows 10 and Windows 8.1
AutoUnattend.xml are not read by en_windows_10_enterprise_technical_preview_9926_x64_dvd_6244735 !
X:\Windows\Setupact.log:
2015-02-17 20:08:22, Info                  UI     Determining whether we should run ConX or legacy setup
2015-02-17 20:08:22, Info                  UI     Running WinPE. Continue to run legacy setup
2015-02-17 20:08:22, Info                  UI     Determining if we are in WDS/Unattend mode
2015-02-17 20:08:22, Info                  UI     No need to hide autorun
2015-02-17 20:08:22, Info       [0x0a000a] UI     Autorun:Autorun core successfully initialized!!!
2015-02-17 20:08:22, Info       [0x0a000b] UI     Autorun:Autorun UI successfully initialized!!!
2015-02-17 20:08:22, Info                  UI     AppWindow has layout style 0
2015-02-17 20:08:22, Info                  UI     NavWindow has layout style 0
2015-02-17 20:08:22, Warning    [0x0a0180] UI     Failed to change the UI language to en-US.
2015-02-17 20:08:22, Info                  UI     CLocales::v_EnumLocalesProc - DownlevelGetLocaleInfoEx failed for locale ar-EG. Error: [1009]
2015-02-17 20:08:22, Info                  UI     CLocales::v_EnumLocalesProc - DownlevelGetLocaleInfoEx failed for locale dz-BT. Error: [1009]
2015-02-17 20:08:22, Info       [0x0a011c] UI     WizardDialogPost::SetActive
AutoUnattend.xml:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <servicing></servicing>
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>fr-CH</InputLocale>
            <SystemLocale>fr-CH</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>fr-CH</UserLocale>
            <SetupUILanguage>
                <UILanguage>fr-FR</UILanguage>
            </SetupUILanguage>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DiskConfiguration>
                <WillShowUI>OnError</WillShowUI>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Type>Primary</Type>
                            <Extend>true</Extend>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>Local Disk</Label>
                            <Letter>C</Letter>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <WillWipeDisk>true</WillWipeDisk>
                    <DiskID>0</DiskID>
                </Disk>
            </DiskConfiguration>
            <UserData>
                <AcceptEula>true</AcceptEula>
                <FullName>Student</FullName>
                <Organization>Cours</Organization>
                <ProductKey>
                    <WillShowUI>OnError</WillShowUI>
                    <Key></Key>
                </ProductKey>
            </UserData>
            <UseConfigurationSet>true</UseConfigurationSet>
            <ImageInstall>
                <OSImage>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Key>/IMAGE/INDEX</Key>
                            <Value>1</Value>
                        </MetaData>
                    </InstallFrom>
                    <InstallToAvailablePartition>true</InstallToAvailablePartition>
                    <WillShowUI>OnError</WillShowUI>
                </OSImage>
            </ImageInstall>
        </component>
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>fr-FR</UILanguage>
            </SetupUILanguage>
            <InputLocale>fr-CH</InputLocale>
            <SystemLocale>fr-CH</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>fr-CH</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Extend>true</Extend>
                            <Order>1</Order>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>LocalDisk</Label>
                            <Letter>C</Letter>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallToAvailablePartition>true</InstallToAvailablePartition>
                    <WillShowUI>OnError</WillShowUI>
                </OSImage>
            </ImageInstall>
            <UserData>
                <ProductKey>
                    <WillShowUI>Always</WillShowUI>
                </ProductKey>
                <AcceptEula>true</AcceptEula>
                <FullName>Student</FullName>
                <Organization>Cours</Organization>
            </UserData>
            <UseConfigurationSet>true</UseConfigurationSet>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Path>c:\windows\regedit.exe /S c:\WinApps\modifreg\modifreg.reg</Path>
                    <Order>1</Order>
                    <Description>ModifReg.reg</Description>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>c:\windows\system32\PNPUtil.exe -a c:\Drivers\HP3600\*.inf</Path>
                    <Order>2</Order>
                    <Description>HP3600</Description>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>3</Order>
                    <Path>c:\windows\system32\PNPUtil.exe -a c:\Drivers\INTEL\*.inf</Path>
                    <Description>DriversIntel</Description>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>4</Order>
                    <Description>NVIDIA210Silent</Description>
                    <Path>c:\windows\system32\PNPUtil.exe -a c:\Drivers\GeForce210\*.inf</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>net user Administrateur /active:yes</Path>
                    <Description>net user Administrateur /active:yes</Description>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>UABhACQAJAB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
                <LogonCount>1</LogonCount>
                <Username>Administrateur</Username>
                <Enabled>true</Enabled>
            </AutoLogon>
            <ComputerName>*</ComputerName>
            <CopyProfile>true</CopyProfile>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="wow64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <StartPages>
                <StartPage wcm:action="add">
                    <StartPageKey>google</StartPageKey>
                    <StartPageUrl>http://www.google.ch</StartPageUrl>
                </StartPage>
            </StartPages>
            <Home_Page>http://www.google.ch</Home_Page>
            <TrustedSites>http://www.google.ch</TrustedSites>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <AllowedSites>http://www.google.ch;http://www.microsoft.com</AllowedSites>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <FavoritesList>
                <FavoriteItem wcm:action="add">
                    <FavTitle>Microsoft</FavTitle>
                    <FavURL>http://www.microsoft.com</FavURL>
                    <FavID>1</FavID>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavID>2</FavID>
                    <FavURL>http://social.technet.microsoft.com/Forums/fr-FR/home</FavURL>
                    <FavTitle>social.technet.microsoft.com/Forums</FavTitle>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavID>3</FavID>
                    <FavURL>http://www.microsoftvirtualacademy.com/training-courses/new-windows-server-2012-r2-jump-start?o=3303#?fbid=SHBa4Q0ku0f</FavURL>
                    <FavTitle>MicrosoftAcademy</FavTitle>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavURL>http://borntolearn.mslearn.net/mct/general/w/errorlog/default.aspx#fbid=iAFmlsKo_3S</FavURL>
                    <FavTitle>MSLearnErrorLog</FavTitle>
                    <FavID>5</FavID>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavID>4</FavID>
                    <FavURL>http://borntolearn.mslearn.net/mct/windowsserver/w/wiki/default.aspx#fbid=iAFmlsKo_3S</FavURL>
                    <FavTitle>MSLearnWiKi</FavTitle>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavID>6</FavID>
                    <FavTitle>Companion-MOC</FavTitle>
                    <FavURL>http://www.microsoft.com/learning/en-us/companion-moc.aspx </FavURL>
                </FavoriteItem>
                <FavoriteItem wcm:action="add">
                    <FavURL>http://technet.microsoft.com/en-us/library/dn250019.aspx</FavURL>
                    <FavTitle>NewinWindowsServer2012R2</FavTitle>
                    <FavID>7</FavID>
                </FavoriteItem>
            </FavoritesList>
            <Home_Page>http://www.google.ch</Home_Page>
            <TrustedSites>http://www.microsoft.com;http://www.bluewin.ch</TrustedSites>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Enabled>true</Enabled>
                <LogonCount>5</LogonCount>
                <Username>LocalAdmin</Username>
                <Password>
                    <Value>UABhACQAJAB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
            </AutoLogon>
            <Display>
                <ColorDepth>32</ColorDepth>
                <DPI>96</DPI>
                <HorizontalResolution>1024</HorizontalResolution>
                <RefreshRate>60</RefreshRate>
                <VerticalResolution>768</VerticalResolution>
            </Display>
            <FirstLogonCommands>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>C:\Windows\Setup\Scripts\FirstLogon.vbs</CommandLine>
                    <Description>FirstLogon</Description>
                    <Order>1</Order>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>C:\Windows\SETUP\SCRIPTS\RunOnceE.bat</CommandLine>
                    <Description>RunOnceE.bat</Description>
                    <Order>4</Order>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>C:\Windows\SETUP\SCRIPTS\CopyDel.bat</CommandLine>
                    <Description>CopyDel</Description>
                    <Order>5</Order>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <Order>2</Order>
                    <Description>Office</Description>
                    <CommandLine>C:\Windows\ConfigSetRoot\Winapps\Office\setup.exe</CommandLine>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <Order>3</Order>
                    <CommandLine>PowerShell Set-ExecutionPolicy remotesigned -force</CommandLine>
                    <Description>RemoteSigned</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <Order>6</Order>
                    <CommandLine>net user administrator /active:yes</CommandLine>
                    <Description>net user administrator /active:yes</Description>
                </SynchronousCommand>
            </FirstLogonCommands>
            <OOBE>
                <NetworkLocation>Work</NetworkLocation>
                <HideEULAPage>true</HideEULAPage>
                <ProtectYourPC>1</ProtectYourPC>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>UABhACQAJAB3ADAAcgBkAEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>UABhACQAJAB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <Name>LocalAdmin</Name>
                        <Group>Administrators</Group>
                        <DisplayName>LocalAdmin</DisplayName>
                        <Description>LocalAdmin</Description>
                    </LocalAccount>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>UABhACQAJAB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <DisplayName>Administrator</DisplayName>
                        <Description>Administrator</Description>
                        <Group>Administrators</Group>
                        <Name>Administrator</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <TimeZone>W. Europe Standard Time</TimeZone>
            <DisableAutoDaylightTimeSet>false</DisableAutoDaylightTimeSet>
        </component>
    </settings>
    <settings pass="auditSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>UABhACQAJAB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <LogonCount>1</LogonCount>
                <Username>Administrateur</Username>
            </AutoLogon>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="catalog:d:/win81/sources/install_windows 8.1 enterprise.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Could not read detail log from DB12 and DB13

hi gurus,
I am unable to read detail log of onlinebackups and Redolog backups from DB12 and DB13 in my BI sytem what could be the problem.
cheers
Kumar

Hi Saurabh,
Thanks and sorry for late reply I am on vacation, I am back today.
How can I check permission of directory for sap backup in GUI level ? Please let me know.
When I try to go through T.code DB12 -> Overview of databse backups - > Double click on todayu2019s date -> and click on Detail log I am getting a pop up with u201CCould not read detail log XXXX.anf u201D
But if I check through SM37 Job log I am able to see the log.
Please help me to solve this problem.
System details
BI System SAP NetWeaver 2004s, Kernel -> 710
DB :Oracle 10g
OS : HP UNIX
Regards
Kumar

My iTunes can not read a file, because its created by a newer

My iTunes can not read a file, because it's created by a newer!!!
The file is: iTunes Library.itl
I hope you can help me!!
Bye tokiodrift

You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2

Get associated avi file from avi file reference

For normal bytestream files, there is a "refum to path" function (under File I/O -> Advanced File Functions) that will give the associated file path for the input file reference. This does not seem to work when an AVI file reference (opened using IMAQ's AVI functions) is wired ("refnum to path" returns <Not a Path>). Is there a way to extract the AVI file path from an AVI file reference?

Thanks for your help. The design of my program involves streaming video to disk (along with multiple other parallel functions, including DAQ interfacing and collection, playing back AVIs in mediaplayer, etc.). Because of this, I have multiple "engine" loops running in parallel to the user interface loop. In the UI loop, the target of the streaming video can be changed or even turned off, so I have a LV2 functional global holding the AVI file reference, which the video streaming engine checks for validity before proceeding through a loop iteration. However, in the engine, certain decisions about extra data that needs to be saved with the streaming video is made by checking the directory of the file it is instructed to write to. Therefore, a way to extract that file name from the reference in the LV2 global would be usefull. The workaround I have to use now is to store the file path as well as the AVI file reference in the LV2 global and pass them around together. This isn't that bad, but in the intrest of keeping block diagrams uncluttered with data I shouldn't need, I posted the question.

I got last update of Firefox today, and since re-start, I can not read my mail from Hotmail, or log in to any of my secure banking sites... Why?

My pc automatically update Mozilla, and today after the update, it restarted as always, but now I can no longer read my email, do my banking or access any secure sites.. I can open their pages, but take no action. It still work with Explorer, so it is not all the banks faults.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

FCP not reading templates correctly from Motion (Urgent)

Hi all,
I am trying to work in FCP (6.06) with templates created in Motion 3.0.2 But FCP seems to be seeing video drop zones as text layers!?
If I use a pre-existing template (or one I have created), when I bring it in to FCP I get the correct amount of input dialogue boxes for the amount of layers in the template, but regardless of whether they are drop zones or text layers the control dialogue box in FCP looks the same and I am unable to actually get anything to appear correctly on the timeline. It's driving me nuts!!
Also: when I have a template on my FCP timeline I am unable to save the project! I delete the template from the timeline and am able to save the project again...
Even weirder: I'm getting the same result on two machines!!
Any Ideas what could be causing this!? (i've tried software update and re-start)
Best
GK

Thank you to those who replied. By further process of elimination I have discovered that Motion does not recognize the ProRes 4444 Alpha Channel. When using a clip with the Animation Codec, it reads the alpha channel perfectly. The ProRes 4444 Clips I exported from Motion with Alpha work perfectly in After Effects ... so clearly Apple has a bug to fix

Elements 10 will not read RAW files from my new Lumix G5

All my RAW files taken with Lumix G1 are fine but the RAW files from my new camera (Lumix G5) won't open. What should I do?
Looking at help in E10, it says ACR is version 6.7.0.339
Elements 10 is version 10.0 (20110831.m.17215)
Any ideas?

You need at least ACR 7.2 for those raw files, and ACR 7 is not compatible with PSE 10. So you have three choices:
1. Upgrade to PSE 11 (not the mac app store version, which is stuck at 7.1). If you are considering this, I would wait a month or so, since Adobe historically releases a new version every Sept/Oct.
2. Use the panasonic software (silky pics?) to convert the raw files and send the resulting images to PSE for further processing.
3. Download the free adobe DNG converter, which can create DNG files that are compatible with your version of ACR.

Speedgrade cc not reading avi timecode from avi created by premiere cc

Similar Messages

Maybe you are looking for