Speedgrade CC only renders one frame for 30 minutes
Graded a simple, straight, 30 minute clip in Speedgrade CC. Render to Prores LT.
It went through the entire render process, but the movie has only a single frame for the entire 30 minutes.
This was nothing but a simple primary gain and contrast grade. Nothing else.
I wouldn't say Sg is a badly compromised program ... if one takes a car and tries to make it do the work of a truck, well ... one will be unhappy with the car, but is it really the fault of the makers of the car?
Speedgrade has it's glitches, and no one on the planet can tell you more about them than the guys that created it or those that are working it behind the scenes. But Speedgrade is designed to be a grading program ... not an NLE or an encoding program. It has those functions simply so that for some who say just want to do quick dailies probably doing quick & dirty grading of un-trimmed "clips" just to get something out for directors to see if what they shot will work. In my experience, for that use you need to know exactly how it needs setting, and have your presets stored.
The whole idea of this software is to be part of a group ... each program specialized into one set of problems, rather than each trying to be an equal Swiss-Army knife. And in use, it works quite well (for most of us most of the time) though there are a few glitches. Such as say, key-framed masks that at times can be problematic. Be that as it is, use the program for what it is designed for. Within that, it can be pretty awesome.
Similar Messages
-
HT204053 How do I combine my Apple ID with my iCloud ID so I only have one password for both?
How do I combine my (accounts) with Apple ID with my iCloud ID so I only have one password for both? I am using the same email address for both but want only one password for both...
You can't "combine" Apple ID's.
-
How can I set up my Apple TV if I only have one spot for an HDMI cable.
how do I hook up my apple tv if I only have one spot for an HDMI cable.
How many different devices (DVD player, cable box, etc.) do you have besides the Apple TV to connect to your TV? If you aren't going to use any of these others, you won't need a switcher.
Also, depending on the device & what other kinds of inputs your TV might have, you may be able to hook them up to other inputs besides your only HDMI one. The quality might be lower for them, & you might have to use several cables for sound & video, but that might end up being acceptable if you use your ATV much more often than the others. -
I would like to change my back ground color in one frame for a logo that i am using I am able to change it on the canvas but not on the timeline?
Are you using FCPX? It doesn't have a canvas. Do you really mean one frame, like 1/30th of a second? Add a custom generator underneath the logo. Make it whatever color you want. Make it however short you want.
-
I currrently have Adobe Creative Cloud and only want one app for now which is Photoshop .... I accidentally installed Lightroom, Bridge CC, Exchange Panel, Extendscript toolkit, Extension manager, touch app plugins from Creative Cloud and would like to uninstall these apps until I have a full understanding of the Creative Cloud.
I pay monthly for membership and do not want to uninstall the Creative Cloud.
Please advise on how to uninstall these other apps.
Thanks.Hi Margaret,
Please use the cleaner tool to remove the app that you would like to uninstall:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Choose the best option as per your decision.
Regards,
Rajshree -
I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I get clarification on the $29.99 offer and who it is available for. Thank you
Hi there
The 29.99 introductory offer is for existing CS customers ie customers with a CS3-CS6 product (suite or individual product).
Hope this clarifies matters.
Thanks
Bev -
Cutting one Frame for a Still Picture
I have iMovie '08 and want to know if there is a way to select and copy one frame and make it a picture I can put on my web site. If so, how do I go about doing this? I have tried the control, select method and just get short clips, when I really just want the one frame for a still photograph.
One of the reasons I wanted this camera was because I thought I would be able to get some great "stop action" shots for my web site.
Sheila KobsHi there
In iMovie 08, one way you can do this is to scroll to the frame you want to use, ( in project or the clip browser, either place) then +*right-click the mouse*+ (control click), and choose *add still frame to project*
The frame you want will be added at the end (if it's in project window)
Then, to access this image, right-click (control click) it and choose +*reveal in finder*+. Then you can open it in preview (or other app) and save it Or from finder window: move it) to wherever you want to store it on the HD.
Hope that helps
Elizabeth -
Illustrator layers only visible one frame
After Effects 2014.2 version 13.2.0.49
Illustrator 2014.1.1 version 18.1.1
So, I started off posting in the wrong forum (Illustrator) and with that
question, seemed to jumped that hurtle, but encountered another.
My first problem was importing an Illustrator layered image as 'Composition
- Retain layer sizes' and had to check off the sequence options as
'Illustrator/PDF/EPS Sequence' in order to keep the layers in the proper
positions (or all layers centered around individual anchor points).
Another problem I had with that was all my layers became mixed - so my
solution was to bring them into the comp in a manual order.
So, now that I have the Illustrator layers in my After Effects comp, the
layers only remain visible for one frame.
I have my comp set for a minute. I started playing with opacities and can't
get past the 'one frame visibility'.
My plans are to 'draw on' the guitar I have drawn in Illustrator, by
keyframing the layer opacities.
I have tried the Animation/Keyframe Assistant/Sequence Layers but I am
missing something.
I want to try other effects that I do not remember the specific effect name
(to draw on the guitar layers), but first I need to start with having my
layers visible for more then the one frame.
What have I missed?Your artboard needs to include all of your artwork. That's the problem with the illustrator file you are showing.
Import as a sequence should never be checked if you are importing only one file whether it is imported as footage or a comp.
When you import as a comp you must open the comp that AE creates to keep the layers lined up.
Most people just getting started with this workflow make all three of these mistakes. The workflow is really easy. Make each object that you want to animate a separate layer, make sure all artwork fits in the your artboard and you only have one, import as a comp retaining layer sizes, then open the comp that AE creates. ALL of the layers that are in the project panel will be the size of that layer. If you are using clipping paths then the layer will be the size of the clipping mask if it extends beyond the artwork.
One last point that I failed to make. You should be creating your artwork so that it is the right size to fit in your composition at it's at rest size. In other words, if at some point in your composition you want to see the whole guitar and have it fill the screen then the strings must be thick enough to work in video. That means they must be at least 2 or 3 points wide. If you want to have the guitar fill only one quarter of the screen and your project is 1920 X 1080 then your dartboard should be set to 1920 pixels or points wide and the strings must still be at least 2 points or 2 pixels wide unless they are absolutely horizontal and vertical AND if you use thin lines or stroke values less than 3 pixels in your illustration you should have snap to pixel turned on in illustrator. Your illustration may be vector art but if there is fine detail in the illustration then it must line up with the pixel grid or it will not look good. -
I have an image sequence in JPG that I want to import into quitck time 7 for making a time lapse clip. It has an option to open the image sequence, but when I do, it only lets me highlight one frame at a time. The select all option seems to do nothing when I click on it trying to highlight all the frames.
If QT7 is not designed to perform this function, is there another alternative? iMovie is non intuitive for this kind of operation and I cannot find a clear tutorial for using it to make time lapse clips from a sequence of still frames.
The tutorials Ive found on YouTube are well intended, but they all seem to leave out a vital step that eludes detection.
Anyway, any help appreciated.
Thanks
I am new to this forum and I'm not sure I can locate this thread again once I'm out of it.
<Email Edited by Host>Yes, I tried that. The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size. I opened that destination folder from quick time from where it said select image sequence. I clicked on the first one and opened it. The result was a large image with an arrow indicating a movie was ready to go. When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie. The files are Jpgs and are about 450 KB each.
To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
Thanks -
How do i create an animation with one frame for each layer?
I have 76 sequential images that i've loaded as layers using bridge, then aligned using photoshop.
I would now like to create a 76 frame animation with one animation frame for each layer
(the layers are in sequential order).
is there an easy way to do this
or do i have to create 76 frames (can duplicate multiple to speed it up)
then set layer visibility for each frame?
thanks
bill w
astro.whwiii.netthanks for all the replies
got it
here's a rough draft of 2 hours of sunshine
http://whwastro.homestead.com/files/big/31-05-2014-prom-animation.gif
-bill w
astro.whwiii.net -
Traffic only allowed one-way for VPN connected computers
Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: endHello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp -
My wife was playing with her iPhone 5 today and decided she wanted to text one of her friends. Upon typing in their name she noticed that it listed them twice and the second one had another number she hadn't put into contacts. I checked her contacts and there is only one entry for this person and only one number. It is linked to facebook but facebook's information is exactly what we already have. So the issue is, where did this other number coming from and why can't I find it anywhere in the phone to delete it..
ACtually that's the problem. The friend she was going to text doesn't have an iPhone nor has she ever had an iPhone. She has a *sighs and shakes head* Samsung galaxy s3. So that wouldn't be the problem. The only thing that I can think of is that her friend changed her number on Facebook and its like a bad cookie or something that's causing the number to show up on her phone. I also wend to the finder from her home screen on her iPhone And searched for the incorrect number and it didn't return any results.
-
Timecode filter off one frame for speed reversed clips
Is this a known issue in Premiere Pro CC? I'm using version 7.2.1 (4).
The video clip in V1 has a reverse speed change applied, and the timecode filter is off by one frame. Or maybe the source overlay is off by one frame? Which should I trust?Another clip in the sequence has a timecode filter error much greater. See attached screenshot. the timeline clip is sped up 694.28%, the source timecode overlay reports 09:25:35:14 and the timecode filter says 09:25:35:07.
-
Apple 2 tv only shows one result for a tv series search
Only one item is listed when I search for tv shows or movies
One episode? One Season? One show?
Sorry, not quite following what you're issue is.
Do you get the same results with a search in iTunes on a PC/Mac?
AC -
Can anybody help. I updated ipad retina with latest software ios7:2. I have only one menu side bar to select HDR square format and movie modes . I do not have the other side bar to select filters, panorama etc
Panorama, live filters doesn't available for the iPad. They're only available on the iPhone. But you can get the filters effect after you captured a photo and edit them in the photo album (Up right) and click on filters. Hope this helped.
Maybe you are looking for
-
Details in original question above - maybe that's why response was that this question had not been asked before. I use very slow dial-up (DSL not available in my area) and I have a lot of computer problems as a result. So I'm not sure if this is beca
-
How to connect to database for all the reports FR
Hi, I have developed 100 reports in production client, for testing purpose I have moved to test client. How can I connect to database for all the reports at a time? Regards Taruni
-
Error in J1ILIC01(Deemed Export License)
Using T.code:J1ILIC01(Deemed Export License), I entered data for Series Group,License Type,License Name,Creation Date,Expiry Date and Pressed Enter. I get the error'Enter Valid Ship-to-party/Sold-to-Party'. I have entered a Valid Ship-to-party/Sold-t
-
Ask for pass code before turning it off?
I iPhone would ask us for the pass code before we can turn it off, if it's stolen people that have it will be unable to turn it off so we can find it using find my iPhone.
-
Hi All, I installed OIM11gr2 on RHEL x64.I tried to assign roles to users ,aprrovals been sent to xelsysadm.I'm trying to approve pending approvals and oim is trying soa server on ssl port 8002 instead of non-ssl port 8001 On soa_server1,I'm getting