Speedgrade not showing clip adjustments till the frame is advanced

I'm working on grading a project and I just updated to CC2014. I've been using speedgrade for a couple of years now, but this is the first project that I've been able to utilized the direct link to Premiere (which at first appears to be a god send). Previously I was working with the DPX files rout, in and out of speedgrade.
The issue I'm running into is the after about 30 minutes of grading I'm not able to see adjustments as I'm making them to the footage. For example if I drop the saturation by a few points I won't see any change my monitor or scopes, but if I bump one frame over I can see the adjustment. However if I go back to the previous frame the pre-adjustment look is still there. This will keep happing during a grading session so that after a couple of adjustments to a clip I'll see colors and brightness dance around as I play through a clips, all of the pre- adjustment frames mixing with the finished look. Now if I close the program and reopen it the clips are fine and all one grade. The copy grade for previous clip function seems to be working fine. I'm not sure what is causing the problem here as I've got a few new variables going on so any advice would be appreciated.
My system is:
mid- 2010 MBP with 8GB ram
Adobe Speedgrade CC2014 2014.0 Release
Grading BMCC ProRes

I'm replying to your question on my phone so I can't look at your project but I did look at your video.
Here is what I would do to troubleshoot the project. First run a RAM preview of the pre-composed and masked wedge comp. If that plays back correctly then everything else should work unless you have applied some kind of time effect to the duplicated layers. If that doesn't work then show us a screenshot of that pre-comp with all of the properties of the movie layer revealed (Press that u key twice).
If you have not sorted this out by the time I get back the office I will try and take a look at your project.

Similar Messages

Masked pre comp of clip not showing clip motion within the mask please help

Hi there,
I'm trying to create a phenakistoscope Phenakistoscope - Wikipedia, the free encyclopedia out of a motion picture of a dancer.
I've transformed the clip of the dancer and precomposed it and then masked and animated the rotation of the pre comp in a new composition. I then duplicated the now animated pre comp 20 times offsetting each one, a frame later than the last to create the wheel effect with trailing frames.
The animation of the mask and offset is working fine, however the footage in the clip is not playing in the masked composition.
please help, here is the project file. Dropbox - caropheankistope.aep
RAW FOOTAGE SAMPLE Dropbox - carolina base_raw sample.mov
NON WORKING COMP SAMPLE OUTPUT Dropbox - carolina base_sample.mov
Thanks
adam

I'm replying to your question on my phone so I can't look at your project but I did look at your video.
Here is what I would do to troubleshoot the project. First run a RAM preview of the pre-composed and masked wedge comp. If that plays back correctly then everything else should work unless you have applied some kind of time effect to the duplicated layers. If that doesn't work then show us a screenshot of that pre-comp with all of the properties of the movie layer revealed (Press that u key twice).
If you have not sorted this out by the time I get back the office I will try and take a look at your project.

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply.

CC Bridge slow-. adjustment brushes not showing size, adjustments when done blind are slow to react

I am running Imac 2.7 GHz    16 gb ram    600 gb hard drive available
adjustment brushes not showing size, adjustments when done blind are slow to react.

Bridge is far more than a file browser.   Bridge does what lightroom does.
When working with Raw files, there are tools,   **adjustment brushes** that allow you to dodge and burn raw files.
These brushes are size adjustable and now with CC, I can not see the size of the tool I am using.
So you might want to look at Bridge differently, as it is a very powerful tool.
Anyone else have a similar experience with CC version of Bridge?

My calendar heading shows last month till the middle of this month - does the same each month

MMy calendar heading each month shows last month till the middle of the current month - e.g. It still shows as February eeven today on 27 March!

Hello memormor,
Thank you for visiting Apple Support Communities.
To see the full scrollable list of events, start from the day view (tap on a day), not the month view, then click .
Calendar at a glance - iPhone
View a list of events. In month view, tap to see a day’s events. In day view, tap .
Take care,
Nubz

My mac will not show images when on the internet?

My mac will not show images when on the internet? I think I have inadvertently changed some settings but nor sure which one.

I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences. Under the Apperance tab there is a check box that is called "Display images when the page opens". Check if that is unticked.

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

Not showing any partitions in the cube

Hi All
I created partition for the cube , im not seeing the partition in trgt cube
even its not showing source database and target database under the partition
I refreshed the partition
so how can i solve this , plz help on this
Thanks

Thanku rinku
I refreshed the partition but its not showing any thing
we have 4 partitions for 4 diff cubes;; for all the 4 partiotions this is the trgt(account) so i deleted 1 cube
form then on words its not showing any partitions in the trgt cube(Account) but remaining cubes under partition im able to see
for only trgt cube im not able to see
wat may be the problem?? plz help on this..
Edited by: user98631 on 23 oct. 2009 08:13
Edited by: user98631 on 23 oct. 2009 09:18

HT4623 My ipod does not show update settings in the About section

My ipod does not show update settings in the About section how can i get the update ios5 in order to get facebook on my ipod how can i do this

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

My designs are not showing, how long is the approval process

My designed personas are not showing, how long is the approval process
== This happened ==
Not sure how often
== Next day after uploading

A few days to a week, give or take.

.bmp files do not show as icons in the event library - I am having to convert them to .jpg to achieve a display

Although .bmp files are to some extent supported, I find that on importing them they do not show as icons in the event library. I am having to convernt them to .jpg files to produce this result. Am I doing something wrongly, or is this the experience of others as well?

Yes - I've posted one of the files to Dropbox and it appears perfectly in picture form on my IPad. So it seems there is nothing wrong with the files. I'm even more puzzled now! I'll try to upload a smaller (less than 2mb) file here. The files I am using in the project, which is a kind of family history using stills, are a complete mix of types - tif, jpg, Canon raw(cr2), psd and bmp. Some, including, I suspect, many of the .bmps are scans from old prints, as this one.

My Ipad does not show it is in the right city, My Ipad does not show it is in the right city, My Ipad does not show it is in the right city

My ipad 2 does not show it is in the right city if I check it on mobile me...anyone else have that problem?

At the time you check your iPads location through MobileMe, your iPad would need to have access to and be connected to the internet.

Playbook Bridge Calendar Not Showing What's on the Phone Calendar

There are calendar items that display of my Curve 9330 but not on the Playbook bridge calendar . If I open the calendar item on my phone and from the menu select either "save" or "send," the item will appear on the Playbook bridge calendar - but it then disappears if I close the calendar and reopen it, or when the Playbook wakes up after it goes to sleep.
This issue pre-dates the OS upgrade and still exists. For many months, everything worked fine, but then this problem arose.
I have reinstalled- re-Paired, re-booted. I backed up the Playbook, reinstalled the OS, deleted and reinstalled the bridge on the phone, pulled the phone's battery -- whatever I try, I still have the same problem - the bridge calendar does not show what is on the phone's calendar.
Appointments added to the calendar on my desktop (we use Lotus Notes) show up on the phone but not in the bridge calendar.
I don't use the native calendar.

Hi JerryPasternak,
I would recommend contacting BlackBerry® PlayBook™ tablet support for further investigation into this issue. You can find the contact information here: http://bbry.lv/MgKtEp
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
David

This is a duplicate thread - see here

Speedgrade not Showing Lumetri Looks Properly in Premiere

I would so love someone if they could help me out with this issue.
What I'm Using:
Speedgrade CC 2014.1
Premiere Pro CC 2014.1
Blackmagic Pocket Cinema Camera
Issue:     Every time I make a custom .look file in Speedgrade with a grade I like for a certain clip I then bring it into premiere for color correcting in my original project. (I'm not using dynamic link or EDL's as both haven given me issues non-stop)
So I thought I could just use the Lumetri effect and drop in a grade from Speedgrade. Then when i do apply the effect....it's some weird colored grade that I never put! Sometimes it is too dark than what I made in Speedgrade, or it is just a whole other color (purple).
Previously Attempted:     I have literally searched the internet for HOURS and cannot find one single answer besides someone saying you need to do this complex calibrating process. I would very much appreciate any help on this issue as it is making me pull my hair out lol
System Specs:
Model:           Asus Desktop PC M32BF_K30BF Series
Processor:     AMD-A10 7800 Radeon R7 12 Compute Cores 4C+8G 3.50GHz
RAM:             16.0 GB (14.9 usable)
System Type: 64-bit Operating System, x64-based processor
OS:                Windows 8.1
Also the processor has some sort of integrated graphics which must be pretty powerful because I can enable hardware processing and make playback much smoother.

I have not been able to find that post regarding the BM drivers, but I did however see another one stating that BM had new drivers for Premiere Pro CC back in June 2013.
I believe I was able to achieve SpeedGrade and Premiere color match but that was when I was importing the dng sequences through the Project bin and was also in PP CC 2014 8.1. Now that I am in 8.2 I cannot replicate the same color match (as of yet). And I add I do not recommend importing dng through the Project bin.
A work around I was applying in PP CS6 was to open the dng sequence through Adobe Camera Raw, apply the color adjustment, batch apply to the rest of the sequence, then 'save as' chosen format. I was saving the dng frames as Photoshop documents, which turn a 2MB file into a 6MB file, that makes massive files with 29.97 frames a second. Then I would import the PSDs into Premiere already color corrected - skipping Speedgrade.
I have never used After Effects as it seems you have to work with individual frames and cannot 'batch apply'. I have seen people ask for a fix on that also.
edit here is the BM driver reference dated this year 2014
https://forums.adobe.com/message/7029460

Speedgrade not showing clip adjustments till the frame is advanced

Similar Messages

Maybe you are looking for