Speeding up and skipping

Hey, when I had the old version of iTunes, 6.05, I was able to play my music while playing computer games but ever since I've installed the new 7.0 version i find that I am no longer able to play my game and iTunes at the same time w/out the music I'm playing on iTunes speeding up and skipping. And I know what your thinking but I've already chacked my CPU percentage at the time and it was fluxuation between 5 and 6 percent usage so that couldn't be it. Any ideas?

Ok, so I've tried a couple changes:
A) Re-install sound card drivers
(manual un-install of all sound card drivers and software, clean registry of all "creative" keys and clean re-install) - I'm running a Creative Audigy 2 OEM card, BTW.
B) Decrease Hardware Acceleration
C) Try "safe mode" for quicktime audio output
D) Tried different sample rates and bit-depth (8,16,24) and variations of the settings
E) Made sure that EQ and Sound Enhancer are disabled.
F) I remember having similar issues with creative sound cards years and years ago on the first VIA athlon chipset motherboards - the issue was with PCI bus latency and VIA eventually fixed it, but on some motherboards there was a latency timer that could be changed. So I checked my motherboard (Gigabyte K8N Ultra SLI) and there is a latency timer - tried switching from 32ms to 128 and vice versa, restarting computer and trying variations of step B), C) and D), and E) and the problem is still there!!!! ARGH!
Once again, this problem is isolated to iTunes - no other audio applications on my PC suffer the same problem - and the issues with iTunes started only after upgrading to iTunes 7.0
Methinks Apple has some buggy directsound support problems with the latest version of Quicktime/iTunes.

Similar Messages

When played, songs speed up and skip (drivers updated/sound enhancer ok)

Songs speed up and scramble even after checked with FAQ troubleshoot. HELP!

Wait do you have a 60GB iPod? If so the new iPod updater 1.1 has a serious bug where the video works fine for 30 secs then comes back on w/ no sound. You would need to run the old iPod updater 1.0 the Disk that came with your iPod has 1.0; run and install that and select restore. DO NOT get iPod updater 1.1 if you have a 60GB iPod.

Music on my iPhone 5s starts, stops, speeds up and skips seemingly at random.

Hi
Randomly my iphone 5s (ios 8.1.3) starts playing music. Also when I am listening to any sort of audio (podcast, music or a phone call), my iphone audio randomly stops, skips and speeds up. I can be on a phone call and the phone call gets ended and music starts.
I've restarted, reset setting and cleaned my headphone jack and used various headphone and still have the issue.
Any suggestions are appreciated

Hi mnmboca,
Is the Music app on your iPhone the only application that is behaving erratically? If so, I would suggest backing up your iPhone, deleting all of the music and podcasts, and then re-downloading just a few songs that you've already purchased to monitor the behavior. If the issue persists, you may need to restore the iOS, since Music is a part of the iPhone's operating system. Here are some resources that will explain the steps in more detail:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT201656
View storage usage on your iOS device
Tap Settings > General > Usage > Manage Storage to see the amount of space each app and its content takes on your device.
Tap an app for more detailed information about its usage.
Depending on the app, you might be able to delete some of the app's content, or delete the app and all of its content.
When you tap on the Music App, and tap Edit in the top right corner, You will see a red dot to the left of All Songs. Tapping on that will remove all of the music from your iPhone.
Download past purchases - Apple Support
http://support.apple.com/en-us/HT2519
Download previous purchases on your iPhone, iPad, or iPod touch
Music
Tap Settings > Music and make sure Show All Music is on.
Tap the Music app.
Find the item that you want to download.
Tap the Download icon.
I hope this information helps ....
- Judy

When i play music, it speeds up and skips. also, voice control screen stops music from playing. why?

This is very frustrating as I use the iPod function daily to listen to music while I work out.
I don't know what is causing this, and Apple's customer service line won't help me.

Wow thank you so much! I didn't even know that option existed! You were so much more helpful than customer service, I really, really appreciate it!

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Opening a new URL, a blank page appears with 2 messages on the top left and right corner of the window: "Advertise here" and "Skip this ad" and it will not go to the requested site until I push "Skip this ad"

It would be nice to have the possibility to attach a print screen or something to give you a better idea what is happening and how it looks like.
Anyway, what I described above is accurate:
- the address bar shows the link where I wish to go
- but the page loaded is blank with these 2 hyperlink messages ("Advertise here" in the top left corner, and "Skip this ad" in the top right corner).
I would like to emphasize that it does not have to do with the requested URL: it does the same thing with all sites, all the time.

For me is the same, it's yet 6 months.
the blank page apears for the first 20-30 of the day's navigation, then no more.
For example: If I open firefox at 9 a.m., it appears until 9.30 more or less. If i surf the web until mignight, at 00.01 a.m. this page starts bugging me.
I have yust to click on the link "skip this ad" to return to the desired web page.
Using Adblockplus and NoScript plug-ins had sadly no effect.
I've read somewere that the ploblem should be an f**** adware called "directCPV"., and that the solution is toremove an .exe file called Directcpv.exe or somewhat else, but in my pc I haven't found any of those linked to this adware.
I tried a full system scan with an antivirus (McAfee), with Malwarebytes, Ad-Aware, ATF cleaner, Spybot, Exterminate-it but NO RESULTS.
I tried to do this in safe mode too.
No way cleaning the cache, temp files, cookies etc.
finally I tried to uninstall Firefox (cleaning all registry entry too) and reinstall it, but the problem is still there.
The only cure seems to be formatting the HD, but it's very last chance.
If someone have an idea, please post it here.

Call tcode and skip first screen

hi all,
before i think of posing a question i have searched SDN for 2days but dint get the desired results.
so i am posting a question.
in my prog am calling a TCODE and in that TCODE i have a mandatory field so when i say skip first screen it does not skip as their is a mandatory field.
so i used my code like this and checked twice and i found i have value in L_PERNO and id is: EHS00PERSONID.
i have a value in L_PERNO.
parameter id of the tcode field is : EHS00PERSONID
set parameter id 'EHS00PERSONID' field L_PERNO.
CALL TRANSACTION 'ZEDIT' AND SKIP FIRST SCREEN .
but it does not set the value... what am i missing still to get it done can i have some input pls.
thanks a lot in advance,
pasala.

Hi Pasala,
You have done everything right and your program will work with simple addition.
Just add the statement below in your transaction 'ZEDIT' in PBO of screen on which mandatory field exist.
get parameter id 'EHS00PERSONID' field 'XXX.'
where XXX is the name of mandatory field on the screen.
Amit Singla

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call Transaction and skip first screen in SE37

Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.

Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra.

Submit "and skip first screen"

hello!
is there an option for submit-command like "and skip first screen" for call transaction?
i would like to start a programm without displaying the selection screen (parameters are provided by submit with ...).
the parameters of the new programm aren't set/get parameters (sap-standard-pgm) therefore call transaction won't work.
thanks
matthias

Hi,
In ur question itself u have given a solution
1. Combination of variant and WITH
DATA: RANGE_LANGU    TYPE RANGE OF SY-LANGU,
      RANGE_LANGU_WA LIKE lINE OF RANGE_LANGU.
PARAMETERS: MSG_FR LIKE T100-MSGNR,
            MSG_TO LIKE T100-MSGNR.
MOVE: 'I' TO RANGE_LANGU_WA-SIGN,
      'BT' TO RANGE_LANGU_WA-OPTION,
      'D' TO RANGE_LANGU_WA-LOW,
      'I' TO RANGE_LANGU_WA-HIGH.
APPEND RANGE_LANGU_WA TO RANGE_LANGU.
MOVE: 'EQ' TO RANGE_LANGU_WA-OPTION,
      'E'   TO RANGE_LANGU_WA-LOW.
APPEND RANGE_LANGU_WA TO RANGE_LANGU.
<b>SUBMIT REPORT00
       USING SELECTION-SET 'VARIANT1'
       WITH MSG   BETWEEN MSG_FR AND MSG_TO
       WITH LANGU IN RANGE_LANGU.</b>
In REPORT00, all parameters and SELECT-OPTIONS take their values from the variant VARIANT1.Only MSG and LANGU take the values that are explicitly passed.
Examples
2. Combination of variant, WITH SELECTION-TABLE, and explicit WITH clauses.
DATA: SELTAB     TYPE TABLE OF RSPARAMS,
      SELTAB_WA LIKE LINE OF SELTAB.
MOVE: 'LANGU' TO SELTAB_WA-SELNAME,
      'S'      TO SELTAB_WA-KIND,      " SELECT-OPTION
      'I'      TO SELTAB_WA-SIGN,
      'BT'     TO SELTAB_WA-OPTION,
      'D'      TO SELTAB_WA-LOW,
      'I'      TO SELTAB_WA-HIGH.
APPEND SELTAB_WA TO SELTAB.
MOVE: 'E'      TO SELTAB_WA-SIGN,
      'EQ'     TO SELTAB_WA-OPTION,
      'F'      TO SELTAB_WA-LOW,
      SPACE    TO SELTAB_WA-HIGH.
APPEND SELTAB_WA TO SELTAB.
CLEAR SELTAB_WA.
MOVE: 'ARBGB' TO SELTAB_WA-SELNAME,
      'P'     TO SELTAB_WA-KIND,      " PARAMETER
      'XX'    TO SELTAB_WA-LOW.
APPEND SELTAB_WA TO SELTAB.
<b>SUBMIT REPORT00
       USING SELECTION-SET 'VARIANT1'
       WITH ARBGB CP 'A*'
       WITH SELECTION-TABLE SELTAB
       AND RETURN.</b>
In REPORT00, all parameters and SELECT-OPTIONS take their contents from the variant VARIANT1except LANGU, which takes its contents from SELTAB, and ARBGB, which takes the value that was explicitly passed.
I got this from ABAP help.
Hope this helps.
Thanks & Regards,
Judith.

Can't pass parameter's to a transaction in a new win and skip first screen.

Dear experts,
I'm trying to open a transaction('CV04N') in a new window from a screen that has input box and a pushbutton. I'm trying to pass parameter(DOKNR/'CV1') into the new transaction and skip the first selection-screen. I tried to use Get/Set parameter and that didn't work.
Also i tried to passing values with batch input and that did pass my values but without skipping the first screen and also it froze the transaction.
Is there anything I can do to fix this problem?

Hi Gershon Osmolovski,
Alvaro is right, CV04N needs to press Execute button. So you need to use Batch Input. If it doesn't work, there must be an error in your code, what messages are returned by SAP? I have tested right now, SAP leaves immediately after the selection screen because there is a code that stops the program if it detects it runs using batch input (SY-BINPT system field). So, you should run CALL TRANSACTION with OPTIONS FROM structured data object (data type CTU_PARAMS, see ABAP documentation for more information), with component NOBINPT='X'. Be careful as an ALV grid is then displayed, you can only simulate the buttons so I advise you to indicate the exaction selection in the selection screen, then press "select all", and execute the function you want.
If you need more help, paste your code, only useful part.
BR
Sandra

Can I execute a report and skip the first screen in CJE0

I'm trying to call transaction CJE0 and skip the first screen. The report name I'm assigning to the PID REI appears in the screen field, but you have to click execute to continue to the report.
Is there something I'm missing.
Thanks
Karen

I've tried using the following code to run project reports without having to select the report name and exectue, but it is still leaving the user on the screen for CJE0 with the correct report name, but it's not skipping the screen and executing the report. Can you see what I'm doing wrong.
Thank-you for your help
Karen
Code -
data begin of bdcdata occurs 100.
         include structure bdcdata.
data end of bdcdata.
data begin of itab occurs 10.
         include structure bdcmsgcoll.
data end of itab.
data program like sy-repid.
program = '11ERL1A'.
bdcdata-program = 'SAPMKCEE'.
bdcdata-dynpro   = '0500'.
bdcdata-dynbegin = 'X'.
append bdcdata. clear bdcdata.
bdcdata-fnam     = 'RKB1D-REPID'.
bdcdata-fval     = program.
append bdcdata. clear bdcdata.
   call transaction 'CJE0' using bdcdata mode 'N'
                           messages into itab.

How to prefill fields and skip first screen with webgui?

Hello,
I am working in an abap web dynpro component: in one view i have a button which on his action has to launch the transaction CG02 (EHS).
I have questions about the Link ITS / Sap Kernel: i use the ITS Service WEBGUI and i want to launch the transaction CG02. I want to go directly to the header data for a substance and skip the initial screen where we have to make a research for a substance.
I have the following URL:
'http://d5e.reach.ehs.saint-gobain.com:8081/sap/bc/gui/sap/its/webgui/?sap-client=100&sap-language=EN&~transaction=*CG02%20RCGRHSCR-SUBID=000000000007;DYNP_OKCODE=SHOW'.
The substance has the ID 000000000007.
I have read an article from Klaus Layer which talk about a new OKCODE.
My question: how to create this new OKCODE and where?
I success to go to the transaction CG02 but unfortunately i stay in the initial screen.
Can you help me?
Thanks.
F. BERRA

Hi Uday,
It's not completly the same pb: for me i have a button in the view, and i have the following codes on the method Action:
DATA: ld_url TYPE string,
         ld_url1 TYPE string,
         ld_url2 TYPE string,
         ld_url3 TYPE string.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
ld_url1 = 'http://d5e.reach.ehs.saint-gobain.com:8081/sap/bc/gui/sap/its/webgui/?'.
ld_url2 = 'sap-client=100&sap-language=EN&~transaction=*CG02'.
ld_url3 = '&~okcode=&WBCHIS; RCGRHSCR-SUBID=000000000007'.
CONCATENATE ld_url1 ld_url2 ld_url3 INTO ld_url.
CALL METHOD lo_window_manager->create_external_window
    EXPORTING
      url    = ld_url            "'http://www.sapdev.co.uk'
    RECEIVING
      window = lo_window.
lo_window->open( ).
I succeeded with this code for a simple transaction like SE37: you have an input field for your transaction, you launch the execution and all is OK.
But for transaction CG02, it's more complex: when you arrive to the transaction, you have to make an action: search the specification : the corresponding okcode is '&WBCHIS', than you put a specification, you make ENTER, you double click on the line and you obtain the header data that you search.
I don't succeed in this case.
Have you an idea?
Best Regards.
F. BERRA

Speeding up and skipping

Similar Messages

Maybe you are looking for