Speeding-up FCPX: 'purge' = snake oil or magic cure??
today, i made a … weird observation:
I dropped in a SDcard with about 20GBs AVCHD, ~180clips.
Import, optimize, proxy - my routine, to give my under-powered MacMini 2.26 a chance to handle 1080/50p.
usually, I do that overnight, knowing, this is a time-consuming process.
Today, I did it by day - noticing: 2% after 2h ... oooops!
Just out of curiosity, me no engineer, I launched Activity Monitor.
ugly: half my RAM blue = inactiv.
more ugly: 0.2MB free, 600MB swap ....
Someone told me lately, to type 'PURGE' in Terminal, which will 'free' inactive memory.
as mentioned: Terminal, Unix, commands - all terra incognita for me!
5sec later, brave Mini told me 4.5GBs free - aaaand: the activity display within FCPX starts to count beyond snail speed. within ~5h, my 3h footage was imported, optimized and proxy-ed! (that is fast on my machine...... )
Questions:
#1) Why does FCPX 'occupy' so much RAM on import? In my humble understanding, it just shovels data from one drive/card to another, plus some minor indexing/read out of meta data (180 clips - that sounds too me not thaaaat much)
#2) Why doesn't it 'free' that RAM, when starting with activity No2, transcoding?? It still doesn't make use of the additionel, freed 4GBs ... but FCPX transcodes noticeable faster. Activity says: before 5% CPU usage, now 160-180%?
… or is it just me? (OS 10.84, FCPX 0.8 ) ....
(my Mac is not in 'mint condition')
Purge = a wonder??
innocentius wrote:
… Coul it be because I always work with short projects? …
just to be nitpicky:
it's about the imports/Events, not 'projects' .....
no, I know what you mean.
I haven't observed the import process never, ... I know, a quick take to be added to an existing Events gets Imported (=and transcoded), blazing fast - even on my antique hardware.
It seems so, that larger (no numerical benchmark) imports, large by number and MBs, make my 8GB Ram stumble.
On another board, I got the advice to import only, and then trigger the transcoding manually.-
... in the next weeks, I'll test it, do screenshots, use my stopwatch.
thanks for sharing your observation!
Similar Messages
-
I have just noticed that on Apr 16 in the "Getting Started" forum here, Studio X remarked:
+"Personally, I believe HDV is the video equivalent of snake oil."+
Given Studio X's reputation, this unlikely to be a judgment made lightly.
Would Studio X care to elaborate? I suspect more than a few of us here would genuinely be interested Studio X's reasoning.At the very best, it's a totally inapt metaphor.
Calling something "snake oil" implies that the product makes claims to which it doesn't live up. Or, more to the point, that it simply doesn't do what it's supposed to do at all.
HDV does precisely what it's supposed to do. It records a high-definition image to tape at a low data rate. (Remember, HDCAM is also 1440 by 1080 with non-square pixels, so the argument that anything less than 1920 isn't really HD has never carried any weight at all with me.)
Does HDV look as good as HDCAM? Of course not. But HDCAM doesn't look as good as HDCAM SR, either, and from 1997 to 2003, HDCAM was the industry-standard for professional HD recording. Sure, you could have chosen to go out to a D6 instead and record totally uncompressed, but hardly anybody did, because the cost was so prohibitive. Until the advent of HDCAM SR, HDCAM — which is technically close to HDV in many respects other than raw bandwidth — was considered good enough.
And yes, back in the late 90s I heard plenty of people claim that HDCAM wasn't "really HD" because of its subsampling and compression. It just turns out those people lost the argument on practical grounds.
I acquire my footage on HDV, using an XL H1. I'm not shooting sports or anything; it's just documentary footage. When finished and downconverted for delivery on standard-def DVD, the footage looks as good as any I've ever seen. Downconverted to 720p for Internet delivery, it holds its own against footage from higher-quality, more expensive sources. At 1080p, an educated observer can tell easily that the footage wasn't shot on HDCAM or HDCAM SR, but since I'm not actually delivering anything at full 1080p resolution right now, I simply don't care.
In a few years, when Blu-ray penetration becomes significant to my producers or when personal computers with screens big enough to show 1080p become commonplace among our audience, I'll make the case to upgrade our gear to something like DVCPRO HD or XDCAM HD422, or whatever the medium-bandwidth acquisition format of the day happens to be. But until then, that would be overkill for me.
So from my point of view, calling HDV "snake oil" is completely nuts, since it does precisely what it's advertised to do in precisely the way it's advertised to do it. -
SOA, Snake Oil-oriented Architecture?
Welcome answers to the following questions quoted from Grady Booch's article,
<a href="http://www-03.ibm.com/developerworks/blogs/page/gradybooch/20061012">Snake Oil-oriented Architecture</a>:
- what distinguishes a good service from a bad one?
- what should the granularity of a service be?
- when should I offer up a stateless service versus a stateful one?
- as for the stateful ones, how to I express their semantics, and how do I ensure their their misuse doesn't corrupt my system?
- how do I express the semantics of a society of services (only the most trivial services work in isolation)?
- how do I decide upon the semantics of the information transmitted by these services so that locally they are efficient and useful but that also globally they are consistent?
- how do I expose some services to some clients and hide them from others?
- how do I offer up variants on a service, so that different clients see a different face to that service?
- how do I ensure the security of critical services, such that I am confident I'm not opening up holes in my enterprise that will let the bad guys in?
- what services should I expose to the world, and what services should I keep hidden? where are services appropriate, and where are they not?
- how do I best expose services in a legacy system?
- who should own/maintain these services?
- are there alternative architectural patterns I should employ instead of services, and where, and why?
Message was edited by:
Yibing WangYibing,
thanks for the link to the amigo's article.
I guess your 4th question is supposed to be two questions.
I will be sitting back, consider(or reconsider some) the questions and come back to this thread and engage in discussing it here.
One of my favourites is the granularity question which some people try to use to disrupt SOA discussions.
regards,
anton -
To all you frustrated FCPX users,
I am a wedding videographer, I made the transiton from final cut studio to FCPX and find it to be an excelent programme. That is until I started to produce a 90 minute complex wedding video with 500+ clips, 10 tracks of music and a substantial amount of colour correction in it. I am working on a 17" mac book pro 2.66gz intel core i7 with 8GB of 1067 MHz DDR3 Ram and a NVIDIA GeForce GT 330M 512 MB graphics card. and I am runnig Lion 10.7.2 (11C74)
This is hooked up to an apple 30" cinema display with the Project and Event filles stored on a 1TB Lacie rugged disc via FW800 I have 30GB of disc space available on the laptop.
I have prepared the movie (60hrs work already) and it has become progressively slower the longer the time line gets. I have tried using proxy media and having no other software open at the time in attempt to get some speed up, not to mention endless restarts. The events are HDV1080i50 (25 Mb/s) Linear PCM. (I am ot sure if I should convert the time line to ProRes422? which is the Codec I used in FCP Studio. I have turned off background rendering and the playback is juddering and evey few seconds the spinning ball comes to play, often for up to 30 seconds before it catches up.
I have been watching how the Ram is used and from there being 2gigs free at the start, I add a clip or two and zoom the timeline, nothing like a Colour correction and suddenly there is only 50mb of free ram and the machine speed nosedives to what we used to put up with 10 years ago!!
If anyone has a fix for this, you would be doing me a huge favour. I am already last with this movie. I was considdering going and buying a mac book pro with Thunderbolt and seeing if that was the problem.
This software is, as it says, a Pro aplication, so surely it should cope with a full length movie?
PhilipI don't know whether this will help, but I have always reckoned that the less you have on the system hard drive, the better your editing app will work.
You say you have got 30GB free but it depends on the size of the HD and how fragmented it is.
I have always suggested never filling a system drive more that 75% and I personally feel uneasy if mine gets above 50% full.
If you have been using the system drive for a year or so it may also be fragmented. OS X is supposed to automatically defragment but it doesn't do it very well according to the many articles that have been published on the web.
You can always test the amount of fragmentation by using an app like
The easiest and safest way to reduce the fragmentation is to copy as much as possible to another drive, delete the originals of the files you copied and then copy back the files which will now be fairly unfragmented.
Another thing that could cause problems with pro-apps like legacy FCP was upgrading the OS from Leopard to SL or SL to Lion etc.
Legacy FCP did not always like it and many pros would erase and do a fresh install of a new OS.
This took time but often saved heartaches later on.
I don't know whether FCP X will be affected in the same way but every year or so it is a good idea to return your computer to its "as new" condition if you can.
Message was edited by: Ian R. Brown -
Magic Trackpad Double Click Speed Inconsistency
I have set the double click speed in the system preferences for the Magic Trackpad at about the halfway point. But it won't stay there.
Every so often, about once a day, I find myself unable to double click and I discover that the slider that controls double click speed has gone to its highest setting. I set it back, and pretty soon the same thing happens again.
I think there's a bug. Please reconfigure the software so that the double click speed setting remains where it was put.When the Magic Mouse and Magic Trackpad are used together it is not possible to set the double-click speed independently.
If the trackpad is set to the highest speed the mouse will not double click. Lower the mouse speed and the trackpad becomes hypersensitive, producing inadvertent selection and dragging problems. -
Lenovo G560 overheating. Need tips on fan speed control
When I am watching movies on my G560 laptop, the area to the left of my touchpad is getting very hot and the laptop is shutting down at times.
When I bought my laptop I used to hear fan noise, but I have noticed recently that I do not hear the fan any more. I was wondering of there was a way to check the fan speed and manually alter it.
The warranty on my G560 is running out with in a month or so, a quick response would be appreciated.the cpu greece tests over the years are the most bunch of snake oil i ever seen.
one review site did a test with 50 and used choclate and fingernail polish to show most are complete waste of money.
compaq builds junk.
lenovo dose not.
the real reason is the notebook makers dont even built the latops.
there like 3 companys that make 90% of the worlds notebooks and pc.
you never even heard of them either.
they make the sonys,acers and so on in a plant on a line with dozens of brands.
just like the way foxconn makes the apples these are huge companys that make the products per instruction of the notebook brand.
notebooks are not like desktops one bit because they are in a tiny space where heat puts a curse in the board.
when you release this you release that spot.
the part of contact for a cpu die is really tiny so it dont have to make the same contact point as cpu cooler.
cpu coolers of notebook are well designed unlike the desktop cooler they make very good contact.
discrete graphics is another story most of all on compaqs with they used a very bad design and had majior issues with.
trust me there no such issues with lenovos because they use a good company to make there notebooks and they also use a good design.
the fan noise issue well that was more of a watch out for sandy bridge issue as sandy bridge can be a very hot chip.
undervolting the chip makes a huge difference in heat as it comes with no performance loss.
it also dont change the way the cpu sits.
when the cpu was mated to the motherboard it perfict that day.
when you pull the cpu now it never fit the same exact way as it has been stressed over time by the tourqe and the heat.
pulling it will effect the fit.
most people dont have the skill to change the greece on a cpu because they will use to much and unlike a desktop cpu that has no open transistors on the surface the mobile cpu dose.
they will add too much and it will run and short out them.
look at a pic of a mobile cpu and then a desktop cpu.
a very different design.
what you telling people is a skill they dont have because they have no idea that a simple mistake will cost them hundreads of dollers.
notebook cpu run 200-300 dollers and some 500 bucks.
pulling the cpu heatsink will effect it natural fit because it under tenion.
i know this because i know metals well and i have 20 years of experence in this area.
i alos worked for a company long ago that made robots for the waffer cpu come from.
i think some people think they might know a quik fix because they built a pc before but notebooks are very different.
i do custom notebook setups for people up here in boston who are willing to spend more on my labour then most notebooks cost.
when i set up a pc it takes me 4-6 hours normally thats a standard win 7 time with all security and services adjusted complete.
people pay for my services because they get longer run times and they stomp anything even notebook makers that charge thousands for custom setups.
if i thought putting snake oil on a cpu would lower temps i would do it just for the lower fan noise and power use it would save.
i know the moment i release the heatsink i never recreate the same exact fit it had under the stress that time made and the point of contact metal to metal will allways be better then if you add silicon to it.
most people dont get that more then a pin head will be more then enough because more then that will cause a heat barrier and lower that.
there whole point to thermal paste is to fill graps in the metal that are from the lapping process.
it not to help cool it like some think.
no thermal paste will ever work better then a pure magnetic grip of metal to metal.
infact if you machine two blocks perfict they stick to each other as if they were magnets.
tourqe them and add heat and they never do that again.
that why latops heatsinks i feel are much more different them desktops one and what most people dont grasp.
dont belive me call your high school science teacher and he explaine why to you. -
How can I restore the oil resistant oileophobic_coating on my iPad 3?
Now that my iPad 3 is a few years old the coating on the screen seems to be wearing off I have used nothing but an ultra fine microfiber cloth (the black one that came with my 3GS iPhone ) but an area about 2 inches in diameter has developed that in landscape mode is in the slightly right of centre space that seems to have lost its coating magic. I could not find anything in the manual on this so I thought it best to ask here
Reading the reviews for products like this on amazon they seem to be either the highly suspicious 5 star better than sliced bread sort or one star total ripoff
This is repeated for the 5 different products which ranged in price from $10 to $50
I smell snake oil and since apple is not selling an approved product in their store I wonder if any of them would do any good; or Just make a minor problem that has me using the microfiber cloth several times a day into a major mess of a sticky screen
I sure would like to here from the experts on this stuff I mean the coating apple uses when they build them. -
GTX 760 Leaking fluid(oil?) and freezing up randomly, bearing noise from fan
I just bought an MSI GTX 760 OC TwinFrozr couple of months ago and am facing serious issues.
Specs on my machine
>i5 3570K
>8 gb 1600 Corsair ram
>Asrock Z77 Ultimate 6 motherboard
>Thermaltake 650W Smart 650
>the GPU in question
>SSD and 2 HDD's
My screen will freeze randomly and the machine will become unresponsive and sound will buzz and slowly advance for ~1-2 minutes until my machine recovers and tells me that a driver has crashed and recovered. Sometimes the machine requires a hard reset. The driver crashing is most likely due to the system slowing down and desyncing. I have reinstalled windows and all drivers, reseated everything, checked every cable, ran without the GPU and stress-tested and I only get this issue with the 760, but not my old 550TI, which I am now forced to use due to the 760's issues. Also ran + installed windows from/on 2 different HDD's.
Before I take this product to RMA at my local shop, I want to publish this here to serve both as proof and for someone to maybe give me some advice regarding this issue, maybe a confirmation that this issue is in fact not with my PSU, CPU or motherboard. I have run stress-tests on all components and only with the 760 connected my machine will freeze. No issues with intelburn, iGPU burners, kombustor on iGPU or memtests, no issues with HDD's. Most of the time with the 760 the machine will freeze in Source-engine based games, youtube videos and VLC running, but also just randomly, without reaching any high stress or load. Haven't managed to get a freeze with ONLY kombustor, except a few times.
Here are some photos of the fans, the surrounding area has, what seems like hydraulic fluid that would come from a hydraulic bearings used in some fans: -----> imgur.com/a/5m7jY <-----. I noticed this because my case window started to get some splatter that was horizontal and adjacent to the GPU, there is also some of the oil on my motherboard, the side window has now been cleaned. The oil could not have come from an external source, since the machine is always upright and the fans are always facing down + I take EXTREME caution and care of my machine on a tri-monthly basis and my machine is a holy shrine to me.
If anyone could confirm that the 760 TF has hydraulic/fluid-bearings on the fans, I would be grateful. I just want to be 100% sure before I apply for an RMA, because if the store claims that the issue is my fault, I will have to pay €40 for collateral + other costs and I simply can't afford that right now.
Thank you very much.Quote from: Flatlanded on 22-January-14, 09:46:28
I have the same card with the same problem. Slight rattle around 70-85%, goes away at full speed but there's an oil line running parallel to my GPU on my motherboard which I'm not happy about. Started the RMA process today, but I'm a little annoyed by the fact that MSI wants ME to pay shipping to them . For the cost of a good courier, I may as well replace the fans... I wish someone would make a water-block for this card.
Have you tried contacting the consumer protection agency in your location? Where did you get your GPU? The RMA should be handled by the reseller in some cases and when a product is malfunctioning, at least in my country, the product needs to be compensated without additional cost to the customer if it is within the warranty period.
I took my GPU in for an RMA as soon as the first response to this thread was made and now pending for a few weeks before I get a new one.
The GPU did indeed have a hydro bearing and they told me that this wasn't an unseen situation and that the product will be sent back asap. Actually, as soon as they saw it, they said that it's clearly a defected product.
Thanks to badboy2k for the quick reply and thanks Flatlanded for replying, hope you can get the card fixed.
I had a very bad experience with MSI products, just last year my cousins motherboard fried just outside the warranty period and now my 270€ GPU has both fans malfunctioning and the card itself freezing my machine. Let's hope the refurbed card wont have these issues and lives on, it's a really good card performance-vise, but unfortunately I'm not impressed by the build quality right now. -
Interesting and useful gesture with the Magic Trackpad
I just discovered something that might be useful to others. I often am dragging small projects between HDDs, in/out of folders, etc. from within FCPX. I use a Magic Trackpad alongside my MB Pro. I just discovered that if I click and hold steady with one (index) finger, I can use the next two fingers and easily scroll a long list of Projects to get where I'm trying to copy or move the selected Project.
Before with a mouse, or the trackpad, I was always tryiing to hit that sweet spot in the corner which would auto scroll the list. I find it hard to do and especially on a track pad. The method above is so much faster and easier, though it does require holding the index finger rock steady while sliding the other two fingers.
This seems to work on the large trackpad of 2009+ MB Pros also though it's harder due to size, placement, etc.
This click with one finger, drag with two technique seems to work in other apps, and other parts of FCPX. I just had not cought onto it until the scenario I described above.maybe I don't get your description a 100% but ... ??
to scroll in the Project list, no 'click'n hold' needed - just the usual 2fingers scroll.
and I wouldn't use the index-finger for a 'click'n hold' - just click with your thumb - and let it stay on the trackpad - and move one or two fingers, as needed.
(my wrist rests on the table, right thumb lower left of MTP, fingers hovering, clicking, touching, smearing )
interesting method is a 'mouse-less' usage of FCPX demoed here:
http://fcp.co/final-cut-pro/news/819-using-gestures-to-edit-with-final-cut-pro-x -
this snake doesnt eat!(i.e. its length doesnt increase and the food doesnt go away when it eats. not to mention it doesnt even get to the food point)
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
/* class SnakeGamez
Fields
Thread t
double speed speed of the snake
int food food value
boolean eating returns if snake is eating or not
Snake s the Snake field
Graphics g Graphics Object
Methods
init- initializes window size, sets thread to null, adds key listener, calls reset() and run()
reset- resets the SnakeGame Applet
drawGrid- draws the grid that the snake stays inside of
keyPressed-
keyTyped
keyReleased
public class SnakeGame extends Applet implements KeyListener, Runnable
Thread t;
double speed;
int food;
protected Snake s;
protected Graphics g;
protected Color c;
/* method void
"main" program, that controls the game, calling methods to move the snake.
parameters:none
returns:none(void)
public void run ()
food = 0;
boolean eating = false;
char x = 'a';
g = getGraphics ();
int theX;
int theY;
theX = (int) (Math.random () * 300) + 5;
theY = (int) (Math.random () * 400) + 5;
// sp foodP = new sp (theX, theY);
sp foodP = new sp (0, 0);
while (s.alive ())
if (food == 0)
do
theX = (int) (Math.random () * 300) + 5;
theY = (int) (Math.random () * 400) + 5;
// theX = (int) (Math.random () * 490) + 5;
//theY = (int) (Math.random () * 490) + 5;
foodP = new sp (theX, theY);
while (s.onSnake (foodP));
food = (int) (Math.random () * 9) + 1;
System.out.println (theX + " " + theY + "SN" + s.head.p.x + "SY" + s.head.p.y);
// g.clearRect (10, 10, 270,360); ONE VALUE IS CORRECT.
/* problem snake is NOT clear in left side.
//g.clearRect (10, 10, 270, 350);
g.clearRect (10, 10, 270, 350);
if (eating)
System.out.println ("AM I EER GONNA EAT!@");
s.grow ();
food--;
else
s.move ();
g.setColor (Color.red);
g.drawString ("" + food, theX, theY);
//System.out.println (s.head.p.x);
if (food == 0)
eating = false;
// if (s.head.p.equals (foodP))
if (s.head ().equals (foodP))
eating = true;
for (int n = 0 ; n < 5 ; n++)
s.draw (g);
// else
//System.out.println(foodP.x + " " + foodP.y + " "+ s.head.p.x + " " + s.head.p.y);
//g.clearRect (200, 500, 200, 700);
// g.clearRect (200, 550, 200, 700);
// g.clearRect (5, 300, 5, 380);
g.clearRect (1, 375, 700, 390);
g.drawString ("Snake's Length: " + s.length () + " x=speed z=slow", 9, 385);
for (int i = 0 ; i < 5 ; i++)
s.draw (g);
for (double delay = 0 ; delay < speed ; delay++)
g.setColor (Color.orange);
g.drawString ("Snake is dead =( Press 's' to restart.", 50, 50);
public void init ()
setSize (300, 400);
t = null;
s = new Snake ();
g = getGraphics ();
speed = 10000000;
addKeyListener (this);
reset ();
run ();
public void reset ()
speed = 10000000;
s = new Snake ();
g.clearRect (0, 0, 300, 400);
drawGrid ();
if (t != null)
t.stop ();
t = new Thread (this);
t.start ();
public void drawGrid ()
g = getGraphics ();
int Locx = 0;
int Locy = 0;
int Locx1 = 650;
int Locy1 = 0;
c = Color.green;
g.setColor (c);
while (Locx < 300)
sp x = new sp (Locx, Locy);
Locx++;
g.drawRect (Locx * 10, Locy * 10, 9, 9);
Locx = 0;
while (Locy < 300)
sp x = new sp (Locx, Locy);
Locy++;
g.drawRect (Locx * 10, Locy * 10, 9, 9);
Locy = 0;
while (Locy < 300)
sp x = new sp (Locx, Locy);
Locy++;
g.drawRect (280, Locy * 10, 9, 9);
Locx = 0;
while (Locx < 300)
sp x = new sp (Locx, Locy);
Locx++;
g.drawRect (Locx * 10, 360, 9, 9);
// Locx = 0;
// Locy1 = 0;
// while (Locy1 < 700)
// sp x = new sp (Locx, Locy);
// Locy++;
// g.drawRect (Locx * 10, Locy * 10, 9, 9);
public void keyPressed (KeyEvent e)
int k = e.getKeyCode ();
if (k == KeyEvent.VK_DOWN)
s.changeDirection ('D');
else if (k == KeyEvent.VK_UP)
s.changeDirection ('U');
else if (k == KeyEvent.VK_LEFT)
s.changeDirection ('L');
else if (k == KeyEvent.VK_RIGHT)
s.changeDirection ('R');
public void keyTyped (KeyEvent e)
char k = e.getKeyChar ();
if (k == 's')
reset ();
else if (k == 'z')
speed += 100000;
else if (k == 'x')
speed -= 100000;
public void keyReleased (KeyEvent e)
} // Snake class
class SnakeNode
sp p;
SnakeNode next;
public SnakeNode ()
//IT MUST BE SET TO SOMETHING, BECAUSE 'never empty'? or maybe because always length 5..
next = null;
p = null;
public SnakeNode (sp z)
p = z;
if (z.direction == 'D')
next = new SnakeNode (z.down ());
else if (z.direction == 'U')
next = new SnakeNode (z.up ());
else if (z.direction == 'L')
next = new SnakeNode (z.left ());
else if (z.direction == 'R')
next = new SnakeNode (z.right ());
next = null;
/* class sp(SnakePoint Class)
class sp
int direction;
int length;
int x;
int y;
public sp (int x, int y)
this.x = x;
this.y = y;
public int lengthR ()
return length;
public sp up ()
return new sp (x, y - 10);
public sp down ()
return new sp (x, y + 10);
public void plot (Graphics g, Color c)
g.setColor (c);
g.fillRect (x, y, 10, 10);
// g.fillRect (x, y, 9, 9);
// g.drawRect (x, y, 9, 9);
// g.fillRect (x, y, 9, 9);
// g.fillRect (x * 10, y * 10, 9, 9);
//g.fillRect (100, 100, 9, 9);
public sp left ()
return new sp (x - 10, y);
public sp right ()
return new sp (x + 10, y);
public int getX ()
return x;
public int getY ()
return y;
public boolean equals (sp s)
return s.x == x && s.y == y;
class Snake
SnakeNode tail;
SnakeNode head;
char direction;
int length;
public Snake ()
sp q = new sp (100, 100);
add (q);
head.p = q;
q = q.down ();
add (q);
q = q.down ();
add (q);
q = q.down ();
add (q);
q = q.down ();
add (q);
q = q.down ();
direction = 'D';
length = 5;
public void draw (Graphics g)
SnakeNode k = tail;
while (k != head)
k.p.plot (g, Color.red);
k = k.next;
head.p.plot (g, Color.blue);
public boolean add (sp s)
length++;
SnakeNode newNode = new SnakeNode (s);
newNode.next = null;
if (empty ())
tail = newNode;
head = newNode;
else
head.next = newNode;
head = newNode;
return true;
public void grow ()
if (direction == 'D')
add (head.p.down ());
else if (direction == 'U')
add (head.p.up ());
else if (direction == 'L')
add (head.p.left ());
else if (direction == 'R')
add (head.p.right ());
public sp remove ()
sp q = new sp (0, 0);
if (!empty () && tail.next != null)
q = tail.p;
tail = tail.next;
length--;
return q;
public void changeDirection (char s)
direction = s;
public int length ()
return length;
public sp head ()
return head.p;
public boolean empty ()
return tail == null && head == null;
public boolean onBody (sp q)
SnakeNode k = tail;
while (k != null && k != head)
if (k.p.equals (q))
return true;
k = k.next;
return false;
public boolean onSnake (sp q)
SnakeNode k = tail;
if (q.equals (head.p))
return true;
while (k != null && k != head)
if (k.p.equals (q))
return true;
k = k.next;
return false;
/* method alive
returns:boolean, true if snake is within bounds, and head is not on the body
public boolean alive ()
if (!(head.p.getX () >= 5 && head.p.getY () >= 5 && head.p.getX () <= 270 && head.p.getY () <= 350))
return false;
else
SnakeNode l = tail;
while (l != head.next && l.next != null)
if (l.p.equals (head.p))
return false;
if (l.next != null)
l = l.next;
return true;
public void move ()
grow ();
remove ();
}this snake doesnt eat!(i.e. its length doesnt
increase and the food doesnt go away when it eats.
not to mention it doesnt even get to the food point)
(whole freakin' application (unformatted to boot) omitted)So what do you expect here? Someone to analyze your stuff for you and fix it? Wrong! -
Hi, we are on 9.2.0.8 and we are using the supplied
purge template to purge the Runtime Repos.
However, it's a bit slow. IS there any way
to speed up the purge process ?
The DBA's say that they had once collected stats on the RT repos and realised it was a mistake.They then deleted
stats, would this cause any issues for the purge API's ?Try this solution here Purging OWB runtime environment 9.2.0.3
HTH -
BT Hub 5 speeds dramatically dropping by the day
Hi there,
I have a serious issue regarding my BT broadband service, I was sold BT infinity 1 with expected speeds of around 28-32mbps.
My Hub 5 was fitted on 6th December 2014 and all seemed fine at that time, when the engineer was here the speeds were around 37mbps (As if by magic!), but even after the engineer had left I was still getting speeds of around 30-32mbps which I was more than happy with.
Over the latter end of December I noticed that the speeds had dropped off to around 24-28mbps, but I just put this down to local traffic on the line due to the busy Christmas period.
Also in December I started to get periodically disconnected when using Xbox Live or Sky on demand services, again I know Xbox was suffering with hacking attacks and again it was a bust period so I just went with it.
Now on to January, I thought that the speeds would again pick up, but to my dismay this did not happen and speeds seemed to teeter around 22-25mbps, I was not to fussed with this as that is good enough for me to get by on, but the disconnections persisted too and often left me having to restart the Hub 5 to get back on again.
Then on Sunday 1st Jan, while I was using Sky on demand and Netflix I started to notice severe buffering issues, I decided to check my speeds again and was shocked to find them at 12mbps, this was just not fast enough to stream comfortably and this has now started to bother me as I often stream over the wireless network along with my kids watching youtube on the tablets.
I have been regularly checking my speeds using 'OOKLA' speedtest as I always do and I am beginning to get concerned over what I am seeing, speeds are still dropping by the day and I am currently only getting 9mbps, a far cry from what I have been getting previously and from what I have signed up for.
I have tried a few suggested tips, like changing the channel for wi-fi, splitting 2.4 and 5ghz for better connections with certain devices, resetting to factory defaults, restarting the hub, but nothing is working and I am worried that at this rate I will be down to 2-3mbps by the weekend and would have been better off with a cheap (non fibre) broadband.
I have had no new additions to the house regarding technology and nothing has changed structurally to have caused interference on these levels, I even turned off every single device in the house (Sky boxes included) apart from my phone today and then placed it next to the Hub 5 (1 foot away) still only attaining 9mbps, something is seriously amiss.
I have noticed a lot of talk about a new firmware that happened on 17/01/15, I have checked my hub was also updated on this date, could there be issues regarding the speed loss due to this firmware patch?
Also looking at the official BT speed check, my line shows no issues and no work is currently going on in my area that I am aware of.
I have heard that regularly restarting the hub may then result in it sending an error message back to BT to raise an issue and this itself can impair the performance, I have been advised to let it settle for 10 days without rebooting it.
I feel at the moment that I am paying for something that I cannot actually use reliably enough to make it worth while and if this persists and I cannot find a resolution I may have to seek advice for terminating my contract early on terms of being mis-sold a product.
I would greatly appreciate any help or suggestions that you guys can offer me and I will be especially interested to hear what the official BT representatives reasons or excuses for this are.RoyceRichards72 wrote:
If this is the issue, and that makes a lot of sense since there have been numerous disconnections since December, how do I get it uncapped again?
Do you know why there have been multiple disconnections?
Once the instability stops, DLM will automatically begin raising your speed.
If you found this post helpful, please click on the star on the left
If not, I'll try again -
Infinity speed, but iPlayer freezes!
I've had BT Infinity for around two years, and mostly it's fine. I get almost constant speeds of D76 U16, and movie/music downwards zoom along at anything up to 30meg.
I have two questions. Why does BCD iPlayer freeze and buffer in the middle of shows? I realise that the freezing most likely isn't caused by my connection to the local exchange, but by the volume of traffic using iPlayer, however, if I'm doing my bit to get the best speeds available, why isn't something being done to speed up things such as iPlayer, ITV Player, and the like? Before I got Infinity option 2 I was told that I must accept that certain services would freeze from time to time owing to my relatively slow line speed on 'normal' broadband, but getting Infinity would cure this problem. The problem is still there almost everytime I use a streaming TV player, so why is this still a problem, and when will I start to see a change? I use a 3 mobile broadband dongle when we go to our caravan on the East Cost. I get download speeds of around 4meg, and iPlayer works better than when I'm at home using the fibre optic service!
My second question is, why does BT still slow down certain services between 4.00pm and Midnight, to a mere trickle, when their adverts boldly say that they 'never' slow down load speeds at certain times of day? If what BT says is true, why would a downloading file slow from 4meg right down to 20kbs, on the stroke of 4.00pm? And before BT jump in and say that I must be downloading an illegal movie file, for my service to slow, I can say that it happens with 100% legal and paid for downloads!
I will be interesting to hear what BT has to say, and whether anyone else gets the same problems as me on BT Infinity option 2.
Solved!
Go to Solution.there are similar posts about bbc problems on this board
the thread is 10 months old
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
I'm getting "Init: SSL call to NZ function nzos_OpenWallet failed with error 29248" error in log file HTTP_Server~1 while starting OHS (using opmnctl startall).
I created a Wallet with auto login option checked. I was able to create certificate Request and got a certificate from verisign (14 days Validity). I imported Root certificate and intermediate certificate from verisign into the wallet and then successfully imported the trial certificate. After saving the wallet in default location I got 2 files (cwallet.sso and ewallet.p12) there.
Configuration in opmn.xml is :
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<environment>
<variable id="PERL5LIB" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread;$ORACLE_HOME\perl\5.8.3\lib;$ORACLE_HOME\perl\site\5.8.3\lib"/>
<variable id="PHPRC" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\conf"/>
<variable id="PATH"
value="$ORACLE_HOME\Perl\5.8.3\bin\MSWin32-x86-multi-thread" append="true"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
my httpd.conf file is as follows:
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/srm.conf and then D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:\product\10.1.3\OracleAS_1\Apache\Apache" will be interpreted by the
# server as "D:\product\10.1.3\OracleAS_1\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
LoadModule mime_module modules/ApacheModuleMime.dll
LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
LoadModule digest_module modules/ApacheModuleDigest.dll
LoadModule expires_module modules/ApacheModuleExpires.dll
LoadModule headers_module modules/ApacheModuleHeaders.dll
LoadModule proxy_module modules/ApacheModuleProxy.dll
LoadModule speling_module modules/ApacheModuleSpeling.dll
LoadModule status_module modules/ApacheModuleStatus.dll
LoadModule info_module modules/ApacheModuleInfo.dll
LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
LoadModule perl_module modules/ApacheModulePerl.DLL
LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
LoadModule php4_module modules/ApacheModulePHP4.dll
LoadModule onsint_module modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
#AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_php4.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName IFLMUD5DLHY4G.i-flex.com
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
UserDir "D:\product\10.1.3\OracleAS_1\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /icons/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\icons/"
Alias /javacachedocs/ "D:\product\10.1.3\OracleAS_1\javacache\javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin/"
</IfModule>
<Directory "icons">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin/"
# "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
AddType application/x-httpd-php .php .phtml
AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost IFLMUD5DLHY4G.i-flex.com IFLMUD5DLHY4G
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
# Required for cgi perl scripts that are run from /cgi-bin/.
SetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin/"
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
# Include the mod_oc4j configuration file
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\oracle_apache.conf"
my ssl.conf is as follows:
<IfDefine SSL>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache dbm:logs\ssl_scache
#SSLSessionCache shmht:logs\ssl_scache(512000)
SSLSessionCache shmcb:logs\ssl_scache(512000)
# SessionCache Timeout:
# This directive sets the timeout in seconds for the information stored
# in the global/inter-process SSL Session Cache. It can be set as low as
# 15 for testing, but should be set to higher values like 300 in real life.
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex sem
# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog logs\ssl_engine_log
SSLLogLevel warn
## SSL Virtual Host Context
# NOTE: this value should match the SSL Listen directive set previously in this
# file otherwise your virtual host will not respond to SSL requests.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
# NOTE: if virtual hosts are used and you change a port value below
# from the original value, be sure to update the default port used
# for your virtual hosts as well.
Listen 443
<VirtualHost IFLMUD5DLHY4G.i-flex.com:443>
# General setup for the virtual host
DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
ServerName IFLMUD5DLHY4G.i-flex.com
#ServerAdmin [email protected]
ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
TransferLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200"
Port 443
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
# Server Wallet:
# The server wallet contains the server's certificate, private key
# and trusted certificates. Set SSLWallet at the wallet directory
# using the syntax: file:<path-to-wallet-directory>
SSLWallet D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.wlt\default\ewallet.p12
#SSLWalletPassword iflex2007
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath conf\ssl.crl
#SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require
SSLVerifyClient optional
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
<Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent "MSIE" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/ssl_request_log 43200" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
Please help me rectifying this error.
Thanks a lot in advance.Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.
Maybe you are looking for
-
Error while uploading stock using Mb1c and migo
Hi Following error is showing,while uploading stock using Mb1c and migo Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK' Can anyone help me?/ Thanks
-
Laptop stopped booting due to EFI boot device problems [SOLVED]
Hi, I'm writing this from my old laptop. My Lenovo U330 touch will not boot. When I turn it on it states that 'default boot device is missing or boot failed'. It used to go to gummiboot and there were Linux and Windows boot options. I can boot from a
-
Auto Truncat of text in table row.
Is there any way to truncate the text displayed in the table row. I need to auto truncate the text in case text does not fit in the row with current column height.
-
Hello all, as described in the "How to integrate BEX Web application into BPS WEB Interface" i've implemented the below listed coding. In the query we ask for a from and to date. Depending on the users setting i have to build the filter value for the
-
Pls -00371 error (problem in multiple declaration )
function code: //start create or replace function salinc(si number default 10) return number is number sinc; number bef; number aft; begin select sum(sal) into bef from emp where deptno=si; update employees set sal=sal+200 where deptno=si; select sum