Speeding up rollover text in TTS

I'm using TTS. I find that when rollover tip messages, takes
a good few seconds. I would like it to be lot quicker.
I looked for what I thought is the relevant code:
acToolTipTimer := SystemSeconds + 99999
I don't understand this. How do I lower the time? Shall I
reduce the 99999. And by how much?

Here's an example with a styled tooltip - one of which shows how an image can be added.
http://96.0.63.10/iWeb-Test/Tooltip3.html
As Cyclosaurus has pointed out, this does create a dead zone in the area of the page covered by the snippet so you would need to avoid placing any hyperlinks in the paragraph below the tooltips.

Similar Messages

Is it possible to add rollover text in PDF generated from FM11?

Hi
I am creating a documentation using FM11. In this, I have used quite a few terms. Though I have given their definitions as a separate section within the FM file, I also want the definitions to be available a rollover text. Is that possible? For example, when the learner moves his mouse over a term called "Project folder", a tooltip-like text should appear with the description of "Project folder".
If not, can I give the description as a pop-up window that will work in PDF?
Worst case scenario, I will have to go with "Jump to Named Destination" feature in FM to take the learner to description section and ask him to use "Previous View" (in PDF) to get back to the position where he came from.
Sreekanth
P.S.: I have read that Shlomo Peret's Timesavers can do the job for me. But, for now, I am not looking to buy anything.

See: Is there a way to create a popup comment in FrameMaker 10?
> ... read that Shlomo Peret's Timesavers can do the job for me.
Yep. Demo at:
www.microtype.com/showcase/FormAsst/SP_RolloverPop_demo.pdf

How do I change mouseover or rollover text in iweb08

I've gone through the web and iWeb as best I can. I can't seem to get a simple answer to this one, so I'm hoping somebody here shares this question.
I use iWeb08. It's great. I've built a complicated website from scratch and it's great.
I simply cannot change the rollover text on images. I've created a bunch of pictures and used them as links to other pages on my site. But now it simply says, "link to xxx" and I cannot figure out how to change that text to what I need it to say.
Any help would be greatl appreciated!

In an earlier post you said "I simply cannot change the rollover text on images."
Note that the text IS the image. So to change the text you have to create an image with the changed text.
In the end you have TWO images. One with this text and one with the other text.
iWeb cannot do that.
So you have to find a solution for that.
Here's a page with rollover images. You can use it in the HTML Snippet. Study the code. Instead of animals use text :
http://www.wyodor.net/_Demo/duckmenu/HoverImages.html

Rollover text not rendering correctly in Safari 7.x

Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix.
This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
Thoughts on how to correct this?
Thanks!

The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
changes to this - note the right edge
But with word-spacing un-checked in Inspector...

How can I get rollover text to show pictures?

The original flash has a publish setting to Flash Player 5, and I have to have the publish setting set to Flash Player 8 (actionscript 2). The original flash works with the Flash Player 5 setting however when I change it the rollover text to picture stops working.
This is the first time I had to work with this and need some help. This is the Coding for the Content
Content
Coding
Actions: Frame 1
_quality="best";
    for (g=1; g<9; g++) {
    this[g]._visible=0;
function menutest () {
    for (i=1; i<9; i++) {
        // Reset Lesson colors
        // myColorObject = new Color(this["l"+i]+[".myitem"]);
        // myColorObject.setRGB(0x020053);
        this["l" + i].gotoAndStop(1);
    this[i]._visible=0;
    // Set Lesson Colors
    // myColorObject = new Color(this["l"+i]+[".myitem"]);
    // myColorObject.setRGB(0xD7A550);
    this[testName].gotoAndStop(2);
     //trace ("testName"+ testName);
    swap = testName.substr(1);
    this[swap]._visible=1;
Actions: Frame 280
stop();
checkanswers-, <info22>
onClipEvent (load) {
    this._alpha = 0;
onClipEvent (enterFrame) {
    if (ii <= 100) {
        ii += 2;
        _root.info22._alpha = ii;
    } else {
        _root.info22._alpha = 100;
//trace("ii" + ii);
track 2, <l1>
track 2, <l2>
track 2, <l3>
track 2, <l4>
track 2, <l5>
track 2, <l6>
track 2, <l7>
track 2, <l8>

This is the coding for the Symbol Definition(s)
Track 2
Coding
layer 3: frame 1
stop();
layer 3: frame 2
stop();
Symbol 159, <myitem>
onClipEvent (load) {
    this._alpha=0;
Symbol 159, <myitem>
onClipEvent (load) {
    this._alpha=100;
oh the text is on one side and the picture appears on the other side. the text stays on the background

How to create rollover text on an image

I'm a non-coder I'm using Dreamweaver CS4 to create a personal website. I know next to nothing about CSS, but I think I understand how to create a style and apply it to elements.
My website has several image galleries, and what I'd like to be able to do is create a rollover text box of some kind that floats up in a fixed position when mouseover on an image. What I'm looking to do is basically what this website does on their top header image:
AstroBin | AstroBin
I've experimented some with spry tooltips but I want the text box to be in the same position and not wherever the mouse is pointing at the time. I have done hours of searching and I cannot come up with a solution to this (at least not one that I understand) and it's quite possible that I don't even know the terms to search for.
What tools or terms am I describing here? What should I be searching for?
Can anyone point me to a good tutorial to do what I'm asking? Please give me the dummy version!
Thanks in advance.

import java.awt.*;
import java.awt.image.*;
import javax.swing.*;
public class fireleaf extends JFrame {
public fireleaf() {
    JLabel label = new ImageLabel();
    JPanel panel = new JPanel();
    panel.setBackground(Color.pink);
    panel.add(label);
    getContentPane().add(panel, "Center");
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    setSize(300,200);
    setLocation(300,200);
    setVisible(true);
private class ImageLabel extends JLabel {
// image from:
// http://java.sun.com/docs/books/tutorial/uiswing/painting/imageSequence.html
    public ImageLabel() {
      Toolkit toolkit = Toolkit.getDefaultToolkit();
      Image image = toolkit.getImage("images\\T4.gif");
      ImageIcon icon = new ImageIcon(image);
      setIcon(icon);
      setOpaque(true);
    public void paintComponent(Graphics g) {
      super.paintComponent(g);
      Graphics2D g2 = (Graphics2D)g;
      g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                          RenderingHints.VALUE_ANTIALIAS_ON);
      g2.drawString("hello", 10, 10);
public static void main(String[] args) {
    new fireleaf();
}

I have the Lucid 2 by LG and want to connect a BT connected mini keyboard to it to speed up my text msgs. Will it work ??

I have the Lucid 2 by LG and want to connect a BT connected mini keyboard to it to speed up my text msgs. Will it work ??

blulazries,
Thank you for reaching out to us. I am glad to see that you are exploring options to expand your device. The LG Lucid 2 is a Bluetooth capable device. If the mini keyboard is android capable then you should have not troubles with connecting it. Most keyboards have listed the compatible functionalities on them. Let us know if you have anymore questions.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

GUI Rollover Text

Is it possible to incorporate rollover text into the custom GUIs for Photoshop? For example, if someone places their mouse over a checkbox, I would like a description of what would happen if that box is checked, just like if you hover your mouse over a tool on the Photoshop tool palette for a few seconds. Any ideas?
var w = new Window('dialog','Rollover');
w.cb1 = w.add('checkbox',undefined,'Test');
w.show();
How would I get the checkbox above to pop-up a rollover text when the mouse is over it? Is it even possible to do this without creating a new window or using an alert?
Thanks in advance for any help!
dgolberg

Almost every contol has a helpTip property. Setting the property does what I think you are asking.
var w = new Window('dialog','Rollover');
w.cb1 = w.add('checkbox',undefined,'Test');
w.cb1.helpTip = "click the box to do something";
w.show();

SWF File Size and Rollover Text Problem

Hi and thanks in advance for any input.
Two problems....
1. SWF File Size
I've made a fairly small (at least in my eyes its small) flash site. However, even tho there really isn't much content, the swf is already 2.4mb and I haven't even finished it. It loads fine on my internet speed, but im worried about general users with slower internet. Is there something i should be doing to get the file size down (hopefully without comprimising quality).
2. Text Buttons (Movie Clips)
The rollover function (Event Listener) for MCs containing text keeps running while the mouse is over the button. I.E. It isnt treating the text box as a button, its treating the text only as a button, so as you roll between one letter and another, the rollover is re-set and re-starts.
The Swf is here.
And the FLA is here. *EDIT* - How can i get this fla to you guys? this doesn't seem to work when i try to download file - it just gives a fla.txt file?
Thanks.
Zack.

Reduce bitmap quality (increase compression).
For each bitmap, select "custom quality" in the symbol properties and set it to no more than 80.
Set the mouseChildren property of the button movieclips to false to avoid mouse events from triggering by child objects (the text inside the movieclip).
services_inner.mouseChildren = false;
projects_inner.mouseChildren = false;
etc..

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

How to do CSS Rollover Text Links in Muse?

In Dreamweaver, we have to the ability to apply CSS styles to text links in order to make it behave like a rollover (the color changes on mouseover, etc.). How do we do this in Muse? Kind regards-
(EDIT): Have a look at the menus on Adobe's main website for an idea of what I want to do.

Google "Adobe Muse Hyperlink Styles" or see threads such as How can I change Hyperlink text styles?

Q10 speed-dial and texting issues

Hi there,
I am setting up a q10 for my wife, and i also have one.
I cannot do speed dial on my q10. I have two brand new identical devices and one can do speed dials, and one cant.. I can set up the speed dials, but it doesnt activate when i do a longpress.
Also when i longpress a number in my call log it doesnt give me the option of sending a text, whereas my other devices does.
Also when i play a song it deosnt give me the choice to add that song as a ringtone whereas it gives me that choice and other choices on my other device.
My questions are:
Is there a way i can restore some defaults to have these features, or change options so i can have these same features that i have on my idetical device.
or is the second devices faulty> Seems odd that it would be as its brand new.

Hi Husam,
Thank you for your questio. However this community is for Cisco Small Business Products and the PLW400 is a Linksys product. Here is the area that may help you further with your question. http://support.linksys.com/en-us/support/powerline/PLW400
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Rollover text and images in Captivate CS4

Hi All,
I am trying to create a rollover image and rollover caption that both appear at the same time when I move over a particular area of my slide. In my example below i want to rollover the arm of the body and have the text and the image appear at the same time. I have tried to put the 2 rollover areas over each other but this seems to give priority to whichever rollover area is on top. Any hints to make this work would be of great help!!

Hi there
What you need to do is abandon each rollover type. Instead, insert a Rollover Slidelet. Then insert a Text Caption and an Image into the Slidelet area. Then on a single mouseover, display the slidelet. Time the Slidelet as needed.
Either that or create a larger image containing both the Text Caption and the Image as a large consolidated image. Then just insert a Rollover Image that shows the larger consolidated image when moused over.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Simple way to create rollover text?

I want to ask visitors on my page to enable pop-ups if they click on one of my quicktimes (to decrease load times, I use pop-up windows on my video-heavy pages). I want the text to appear over the still "poster" image of the quicktime when they mouseover it. Is there a simple way to do text rollover? Or do I have to make it into an image (create another jpeg for each "poster" with the text written on it)?
Here's the site: http://web.me.com/roncutz/roncutz/theatricaltvspots.html
Thanks in advance.

Heres' a solution that takes the form into acount :
<iframe style="margin: 0px auto"
src="../../../roncutz/" width="322" height="240" frameborder="0" scrolling="no">
</iframe>
<script language="JavaScript" type="text/javascript">

</script>
<form style="position: absolute; left: 45%; margin-top: -35px;"><input type="button" value="PLAY">
</form>
It would be safer to use a webpage to display the popup movie. A MIME file error exist on the MobileMe server when you either upload your movie from the Finder to the Sites folder on MobileMe or if you upload with Cyberduck.
The movie will download in Safari instead of being displayed.
http://discussions.apple.com/message.jspa?messageID=11150467&tstart=0
Here's a solution : http://www.wyodor.net/MoreEmbed/embedmedia.html
Click the link in the sentence : +Here's a basic sample page with shaded background you can use for testing.+
And click the link in the sentence : +Click to open a window with the pop-up code.+

Speed of scroll text

Hi!
How can I adjust the scrolling speed of the end credits?

AppleMan1958 wrote:
You need to adjust the length of the scroll by dragging the handle at either end. Make it longer to scroll slower. Make it shorter to scroll faster.
[Also, see this tutorial|http://www.kenstone.net/fcphomepage/imovie_09stone.html#titles]
There appears to be another issue (also seen it reported elsewhere in this forum) in that you can't have a long string of text with the scrolling text. Whether it is something to do with the number of lines or whatever (it is definitely not a time thing), the scroll text option won't let you go past a certain point. If I add one more line at the top, I lose one at the end, regardless of the length of time of the clip. I'm having to split the text into two separate entries, but there is a gap. Scrolling text insists on putting an "ending" of some type after the last line of text that is not editable. Very frustrating. Other video packages I've used adjust the speed of the scroll based on the amount of time, but don't have limitations as to how much data you want to have. As I said, others have reported it as well.

Speeding up rollover text in TTS

Similar Messages

Maybe you are looking for