Speeding up the editing process on slower computer with noobie editor

Hi, All!
I seem to spend a lot of time sitting and waiting, and would like to know if anyone has ideas for speeding up the editing process without spending thousands on a new computer.
Marking "ins and outs" in the viewer before putting into the sequence/timeline sounds like the first one, to save rendering all of the captured material..... Is this what "real" video editors do? Is it recommended to make subclips, or just to drag into the timeline and then mark new in and out?
Any other work habits that might help an inexperienced editor-person work faster?
I've heard that it's possible to "edit in low resolution and output in high resolution". Is this possible? What might be involved? I have tried lowering the render % settings, but there seems to be no way to go back and re-render the edited sequence.
Can I edit in DV and output in HDV? By re-capturing? Is that what "Capture Project" is for? Given that DV and HDV are not just the same thing with a different number of pixels, will the edits be at the same frame (etc)? At what point in the editing would I want to do a "low res to hi res" conversion?
Is there a piece of hardware that could make my editing faster on this machine? Video card with more memory, for instance?
Any help would be much appreciated!
Thank you!!
CD

You should not have to render your captured material. If the capture settings match the sequence settings (conform this by checking item properties for both) then no rendering is necessary except for effects and filters.
Offline editing (editing in low res and capturing in full res) is not a function available in FCE.

Similar Messages

  • So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • How do you change the tempo on a track once you have started the editing process

    I dont know why but i cant figure out how to change the tempo of a track after i have set it before creating the project and begin the editing process on it. i just want to be able to slow the song down because some times i miss the desired tempo range and set it to something completely contrary to what i am trying to do. Please help me because am new to thins. thanks.

    Alieufromwa wrote:
    how to change the tempo of a track project after i have set it
    http://www.bulletsandbones.com/GB/GBFAQ.html#settempo
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • What is the keyboard shortcut to lighten images during the editing process?

    What is the keyboard shortcut to lighten images during the editing process?

    I have no idea what you mean. You need to explain better.
    Mylenium

  • Slow computer with spinning rainbow for long periods

    slow computer with spinning rainbow for long periods, how do I correct this ?

    Do you have any experience with hardware upgrades? Even a beginner could install some RAM in a Macbook, that is a very simple process and can often give you a major, noticable speed boost. For a more advanced upgrade, you can also replace your harddrive with a newer, faster one. I recomment ifixit.com for all the parts you might need to upgrade your machine. I have upgraded my White Mid-2010 Unibody macbook to 8GB of RAM and a 1TB SSD and it runs like a champ.

  • When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

    Hello,
    When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
    What does that mean?
    Thanks in advance for fixing my problem.

    I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
    EDIT: Here, this might help: http://support.apple.com/kb/ts1567

  • I have loaded Digital Editions 3 on my computer with windows 8.1 cannot authorise

    I have loaded Digital Editions 3 on my computer with windows 8.1  however I cannot authorise the computer.  I get the message "ACTIVATION SERVER ERROR   code: E_ADEPT_REQUEST_EXPIRED:  Can anyone help me
    Thanks 
    Adrian

    This techdoc should help you. You can either use WIA, (your scanner should be detected under it), 32 bit Photoshop CS6 and the 32 bit Twain plugin, or Vuescan.
    TWAIN plug-in | Photoshop CS4 and later
    Gene

  • I am the administrator on our family computer with 3 other member logins. I have downloaded the pages app but how can my other family members also use it on the same computer?

    I am the administrator on our family computer with 3 other family member logins. I have downloaded the app for pages but how can I allow the other users access to it? I am a computer novice so i need some advice.

    If Pages and the other applicatioins installed in the Applications in the root directory they can be used by everyone. By default all programs installed by the App store are installed in the Applications folder in the root. In other words, your family members should be able to use the programs. Can they not?

  • Hierarchies Job Failing  The job process could not communicate with the dat

    Hi Experts,
    We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
    The error i get is
    The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                               error <50406>.
    Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
    Any Suggestion on this problem...

    Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
    DS 3.2 (Verison 12.2.0.0)
    OS: GNU/LINUX
    DF Cache Setting :- In Memory
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 26
    model name      : Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
    stepping        : 4
    cpu MHz         : 2933.437
    cache size      : 12288 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
    bogomips        : 5866.87
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management: [8]
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 26
    model name      : Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
    stepping        : 4
    cpu MHz         : 2933.437
    cache size      : 12288 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
    bogomips        : 5866.87
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management: [8]
    Thanks for your help

  • SCCM Application & Package deployment-Using the Required option to speed up the deployment process

    Current Environment-Window server 2012, SCCM 2012
    Question:
    Is there a way to speed up the process for the application or package to get downloaded to the SCCM Cache folder on the computer using the Required option. The reason is that when ever i use the required option and use the time as UTC or client local time
    with As soon as Possible, the time for the package to download and install by itself would take atleast an hour.When i use the Available option and go to configuration manager and click on the machine & user retrieval policy, the application or package
    appears on the system center within seconds, but it dosent happen the same when i use the Required option. The polling schedule is currently set to 5 minutes.Is there any settings or time interval which needs to be changed or i am missing out to speed up the
    current Required option process.

    Content is not ever downloaded by the client for available deployments until you actually initiate the deployment so not sure what you are expecting.
    I think you are confusing some of the basic concepts here also. When Torsten and I say download, it means the download of the content associated with the package/application once the deployment starts. However, a client learns of new deployments (and things
    about those deployments like if they are required or not) by retrieving the policy -- this is not the "download". Policy retrieval happens on the cycle specified in the client settings and is by default every 60 minutes although this can be force in a few
    different ways including initiating a machine policy retrieval and eval cycle o the client. As Torsten also said, there's no difference between the policy retrieval for required or available deployments -- there's no way for these to be.
    Also, why would you use UTC?
    Jason | http://blog.configmgrftw.com

  • How can I adjust the clip speed in the editing window of Premiere Elements 11?

    In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
    But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
    Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
    So, is this function really gone? I couldn't emagine why! Or how is this done now?
    Couldn't find any post or video, explaning how to do that now.
    No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
    And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
    I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
    Thanks in advance!

    SG
    An interesting point that you point out
    "However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
    I am assuming that you are referring to an earlier version of Premiere Elements,  having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
    In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
    On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
    ATR

  • Getting started with the editing process

    Recently (about a year ago) took a hammer to all my PCs and purchased a PowerBook.  Since then I have purchased two iMACs for home use.  Also recently purchased (within the past 30 days) Final Cut Pro X, Logic Studio, Motion, Compressor and a few other rather complicated applications; complicated for me at least.  I've purchased a couple of tutorial books, but will admit they appear to be written for a reader who already has a working knowledge of this editing process using terms I am not familiar with.
    What teachinig aids can any of you recommend for someone who is lterally starting at "below" ground level for video and audio editing and manipulation?

    SteveBriscoe wrote:
    …  Final Cut Pro X, Logic Studio, Motion, Compressor and a few other …
    usually within less than 8-10 years you should understand this bunch of professional tools.
    to get a first glimpse of the new interface paradigm of FCPX, spend an hour on the video tutorials for its Lil' Brother iMovie
    http://help.apple.com/imovie/index.html#button-1
    it's a dumbed-down FCPX, but teaches you the differences to older NLEs (such as 'no tracks')
    after accepting the principles of Events and Projects, skimming and key shortcuts, plus the different nomenclatura (lately some guy asked here, what is skimming - obviously he never touched any of the apps, nor a Mac), switch to the manual of FCPX
    http://help.apple.com/finalcutpro/mac/10.0.6/
    which only touches the possibilities of this tool.
    if you're a more hands-on guy, book some courses ....
    if you never did any video-editing, stay with iMovie for a few dozen Projects to understand 'editing', then dare the plunge to FCPX.-

  • Very slow computer with all apps after Yosemite install

    I'm attaching the EtreCheck in order to get some help. Thanks.
    Problem description:
    Very slow launch of applications with Yosemite
    EtreCheck version: 2.1.2 (105)
    Report generated 15 de diciembre de 2014, 19:28:26 GMT+1
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      AMD Radeon HD 6750M - VRAM: 512 MB
      Color LCD 1920 x 1080
      HP 2311x 1920 x 1080 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:22:35
    Disk Information: ℹ️
      APPLE HDD HTS727575A9E362 disk0 : (750,16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 748.93 GB (83.02 GB free)
      Core Storage: disk0s2 749.30 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Western Digital My Passport 0748 2 TB
      S.M.A.R.T. Status: Verified
      disk2s1 (disk2s1) <not mounted> : 210 MB
      Mi Passport (disk2s2) /Volumes/Mi Passport : 2.00 TB (121.89 GB free)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Anywhere
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /Library/Application Support/Roxio
      [not loaded] com.roxio.TDIXController (2.0) [Support]
      /Library/Extensions
      [loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
      [not loaded] com.microsoft.VirtualPC.Networking.1040 (7.0.2) [Support]
      [not loaded] com.pgp.iokit.PGPdiskDriver (9) [Support]
      [not loaded] com.pgp.kext.PGPnke (1.0.0) [Support]
      /System/Library/Extensions
      [not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
      [not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
      [not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) [Support]
      [not loaded] com.paceap.kext.pacesupport.master (5.6.1) [Support]
      [not loaded] com.pgp.iokit.PGPwdeFilter (1.0.1) [Support]
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      [loaded] com.squirrels.airparrot.framebuffer (2 - SDK 10.7) [Support]
      [loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Support]
      [not loaded] com.wdc.driver.1394HP (1.0.9) [Support]
      [not loaded] com.wdc.driver.USBHP (1.0.11) [Support]
      /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
      [not loaded] com.paceap.kext.pacesupport.leopard (5.6.1) [Support]
      [not loaded] com.paceap.kext.pacesupport.panther (5.6.1) [Support]
      [not loaded] com.paceap.kext.pacesupport.tiger (5.6.1) [Support]
    Startup Items: ℹ️
      PACESupport: Path: /Library/StartupItems/PACESupport
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [running] at.obdev.LittleSnitchUIAgent.plist [Support]
      [running] com.amazon.sendtokindle.launcher.plist [Support]
    Launch Daemons: ℹ️
      [running] at.obdev.littlesnitchd.plist [Support]
      [loaded] com.barebones.authd.plist [Support]
      [running] com.filemaker.fms.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] com.squirrels.kextinstaller.plist [Support]
      [failed] PACESupport.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.ltvbit.plist [Support]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [loaded] com.google.keystone.agent.plist [Support]
      [failed] com.Wondershare.TunesGoWatchDemo.plist [Support]
    User Login Items: ℹ️
      Dropbox Aplicación (/Applications/Dropbox.app)
      Genieo Aplicación (/Applications/Genieo.app)
      Genieo Aplicación (/Applications/Genieo.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.2.4 [Support]
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
      AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.15 [Support]
      OfficeLiveBrowserPlugin: Version: 12.2.3 [Support]
      Mathematica: Version: 8.0.1.2063850 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    User internet Plug-ins: ℹ️
      WebEx64: Version: 1.0 - SDK 10.6 [Support]
    Safari Extensions: ℹ️
      Evernote Web Clipper
      Slick Savings Adware! [Remove]
      Omnibar Adware! [Remove]
      MacVeXe
      Amazon Shopping Assistant Adware! [Remove]
      Ebay Shopping Assistant Adware! [Remove]
      Searchme Adware! [Remove]
    3rd Party Preference Panes: ℹ️
      Flip4Mac WMV  [Support]
      Perian  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 748.93 GB Disk used: 665.91 GB
      Destinations:
      Mi Passport [Local]
      Total size: 2.00 TB
      Total number of backups: 99
      Oldest backup: 2013-01-04 00:59:11 +0000
      Last backup: 2014-11-24 02:17:18 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 665.91 GB X 3)
    Top Processes by CPU: ℹ️
          38% WindowServer
          33% Finder
          24% calibre
          2% launchd
          2% com.apple.WebKit.Networking
    Top Processes by Memory: ℹ️
      507 MB calibre
      301 MB java
      258 MB Finder
      232 MB WindowServer
      223 MB Safari
    Virtual Memory Information: ℹ️
      126 MB Free RAM
      3.41 GB Active RAM
      3.29 GB Inactive RAM
      1.44 GB Wired RAM
      2.89 GB Page-ins
      15 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 07:06:53 PM Self test - passed
      Dec 15, 2014, 07:02:31 PM CVMCompiler_2014-12-15-190231_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 07:02:11 PM iBooks_2014-12-15-190211_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 07:01:51 PM aslmanager_2014-12-15-190151_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:57:58 PM QuickLookSatellite_2014-12-15-185758_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:57:46 PM QuickLookSatellite_2014-12-15-185746_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:57:23 PM QuickLookSatellite_2014-12-15-185723_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:56:06 PM calibre_2014-12-15-185606_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:55:55 PM mdworker32_2014-12-15-185555_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:55:49 PM garcon_2014-12-15-185549_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:55:35 PM garcon_2014-12-15-185535_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:55:20 PM xpcproxy_2014-12-15-185520_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:53:55 PM mdworker_2014-12-15-185355_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:51:46 PM mdworker_2014-12-15-185146_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:51:30 PM lssave_2014-12-15-185130_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 06:51:30 PM xpcproxy_2014-12-15-185130_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 04:44:18 AM mdworker_2014-12-15-044418_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 01:13:43 AM mdworker_2014-12-15-011343_MacBook-Pro-de-Manuel-3.crash
      Dec 15, 2014, 12:07:47 AM mdworker_2014-12-15-000747_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 09:25:36 PM AdobeReader_2014-12-14-212536_MacBook-Pro-de-Manuel-3.hang
      Dec 14, 2014, 09:25:34 PM Mail_2014-12-14-212534_MacBook-Pro-de-Manuel-3.hang
      Dec 14, 2014, 09:22:33 PM mdworker_2014-12-14-212233_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 09:18:19 PM mdworker_2014-12-14-211819_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 04:52:14 PM mdworker_2014-12-14-165214_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 03:03:01 PM mdworker_2014-12-14-150301_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 03:02:51 PM mdworker_2014-12-14-150251_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 01:14:28 PM mdworker_2014-12-14-131428_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 01:13:34 PM genatsdb_2014-12-14-131334_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 01:12:48 PM lssave_2014-12-14-131248_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 01:12:48 PM mdworker_2014-12-14-131248_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 01:09:13 PM mdworker_2014-12-14-130913_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 10:42:20 AM mdworker_2014-12-14-104220_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 04:04:06 AM mdworker_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 04:04:06 AM lssave_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 04:04:06 AM aslmanager_2014-12-14-040406_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 12:44:32 AM maspushagent_2014-12-14-004432_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 12:44:26 AM mdworker_2014-12-14-004426_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 12:44:23 AM lssave_2014-12-14-004423_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 12:44:19 AM aslmanager_2014-12-14-004419_MacBook-Pro-de-Manuel-3.crash
      Dec 14, 2014, 12:44:18 AM nehelper_2014-12-14-004418_MacBook-Pro-de-Manuel-3.crash
      Dec 13, 2014, 10:55:16 PM mdworker_2014-12-13-225516_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 10:55:15 PM mdworker_2014-12-13-225515_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 06:26:48 PM mdworker_2014-12-13-182648_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 05:13:08 AM AddressBookSourceSync_2014-12-13-051308_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:39:35 AM mdworker_2014-12-13-043935_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:09:31 AM mdworker_2014-12-13-040931_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:08:51 AM mdworker_2014-12-13-040851_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:06:42 AM lssave_2014-12-13-040642_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:06:39 AM lssave_2014-12-13-040639_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:06:30 AM mdworker_2014-12-13-040630_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:06:30 AM lssave_2014-12-13-040630_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:05:33 AM mdworker_2014-12-13-040533_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:03:31 AM iTunes_2014-12-13-040331_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:03:23 AM AddressBookSourceSync_2014-12-13-040323_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:03:12 AM findNames_2014-12-13-040312_MacBook-Pro-de-Manuel-2.crash
      Dec 13, 2014, 04:03:02 AM systemstatsd_2014-12-13-040302_MacBook-Pro-de-Manuel-2.crash

    First you need to get rid of all the malware on your computer starting with Genieo. Also, get rid of:
    [failed] com.Wondershare.TunesGoWatchDemo.plist [Support]
    [failed] PACESupport.plist [Support]
    Startup Items: ℹ️
      PACESupport: Path: /Library/StartupItems/PACESupport
      Startup items are obsolete in OS X Yosemite
    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)

  • How Can I speed  up the results on my JSP page with the help of Caching.

    I am generating a dropdown listbox by merging an xml file with a style sheet(xsl).
    This list box comes up fine without any problems. Now, I am adding some advanced
    logic to the
    style sheet (xsl) to use the same xml file in a more efficient way. This time
    the generation
    of the list box is taking much longer (upto 25 seconds) although I get the results
    I want.
    Is there any way I could speedup this process by using weblogics caching. I know
    the process is slowing down
    due to the code in the stylesheet. Will caching resolve this issue?. I tried
    using
    <wl:cache> </wl:cache> on the jsp page generating this listbox but found no improvement.
    Any help will be very much appreciated.

    turn off your phone, unplug your router, leace it off for 30 seconds, and then power it back on and turn the iphone back on

  • Speeding up the footage more than 1000% but with transitions

    Hey there,
    I am trying to speed up the footage of a view out of an airplane window in Premiere Pro CC. I basically want to have a view over the whole landscape, let's say in a height of 300m, and then speed this view gradually up until the airplane lands, and all this within around 3-5 seconds seconds.
    The first problem I have is that I seem to not be able to speed my footage up to more than 1000%. If I wanted to have a time lapse between being up in the air and landing on the runway within like 5 seconds that is definitely not enough.
    The second problem is that I don't want to start the timelapse sudden, but have a transition when changing the speed. Normally, I do that with these blue little handles to get a S-curve for my speed of a certain clip. When I tried googling it considering a higher speed than 1000% someone only suggested to export the speeded clip, import it again and then speed it up again. But then there is no gradually speed up possible, it only works for the same speed over the whole clip
    Summarizing these problems, I can't find a way to speed my footage up to more than 1000% without loosing the effect of a gradually S-speed-curve.
    Does anyone have an advice on how to solve this problem, especially focussing on my specific clip?
    Thank you and sorry for my english.
    Peter

    You should not have to render your captured material. If the capture settings match the sequence settings (conform this by checking item properties for both) then no rendering is necessary except for effects and filters.
    Offline editing (editing in low res and capturing in full res) is not a function available in FCE.

Maybe you are looking for