Speeding up the footage more than 1000% but with transitions

Hey there,
I am trying to speed up the footage of a view out of an airplane window in Premiere Pro CC. I basically want to have a view over the whole landscape, let's say in a height of 300m, and then speed this view gradually up until the airplane lands, and all this within around 3-5 seconds seconds.
The first problem I have is that I seem to not be able to speed my footage up to more than 1000%. If I wanted to have a time lapse between being up in the air and landing on the runway within like 5 seconds that is definitely not enough.
The second problem is that I don't want to start the timelapse sudden, but have a transition when changing the speed. Normally, I do that with these blue little handles to get a S-curve for my speed of a certain clip. When I tried googling it considering a higher speed than 1000% someone only suggested to export the speeded clip, import it again and then speed it up again. But then there is no gradually speed up possible, it only works for the same speed over the whole clip
Summarizing these problems, I can't find a way to speed my footage up to more than 1000% without loosing the effect of a gradually S-speed-curve.
Does anyone have an advice on how to solve this problem, especially focussing on my specific clip?
Thank you and sorry for my english.
Peter

You should not have to render your captured material. If the capture settings match the sequence settings (conform this by checking item properties for both) then no rendering is necessary except for effects and filters.
Offline editing (editing in low res and capturing in full res) is not a function available in FCE.

Similar Messages

  • TS1292 How come it doesn't show the amount of money there is s gift card?  I tried putting in the code more than once, but all it says is that the card has already benn redeemed?

    How come it doesn't show how much money there is left in my iTunes gift card?  I have tried putting in the code more than once, but all my tablet says is that the card has already been redeemed.

    I haven't got access to the server right now (so I can't provide the complete details), but something like 6-700 GB (which is more than it shows in the client time machine windows, but less than what is true (which was around 1,5 TB))

  • Difference of the results more than 1000

    I have to write a procedure where if the results of the following result set varies by more than 1000 than it should sent out a paramter YES
    COUNT(1)     TABLE_NM
    42986     A_TBL
    539     B_TBL
    42986     C_TBL
    42986     AD_TBL
    so if the difference between the counts of any tables is more than 1000 then it should send YES.
    can someone suggest?

    SQL> create table tbl
      2    as
      3      select 42986 cnt,'A_TBL' table_nm from dual union all
      4      select 539,'B_TBL' from dual union all
      5      select 42986,'C_TBL' from dual union all
      6      select 42986,'D_TBL' from dual
      7  /
    Table created.
    SQL> select  case count(*)
      2            when 0 then 'NO'
      3            else 'YES'
      4          end result
      5    from  tbl t1,
      6          tbl t2
      7    where t2.cnt - t1.cnt > 1000
      8      and rownum = 1
      9  /
    RES
    YES
    SQL> drop table tbl
      2  /
    Table dropped.
    SQL> create table tbl
      2    as
      3      select 42986 cnt,'A_TBL' table_nm from dual union all
      4      select 42980,'B_TBL' from dual union all
      5      select 42950,'C_TBL' from dual union all
      6      select 42970,'D_TBL' from dual
      7  /
    Table created.
    SQL> select  case count(*)
      2            when 0 then 'NO'
      3            else 'YES'
      4          end result
      5    from  tbl t1,
      6          tbl t2
      7    where t2.cnt - t1.cnt > 1000
      8      and rownum = 1
      9  /
    RES
    NO
    SQL> SY.

  • Can we upload more than 1000 records with BPS file upload pf

    We are using file upload functionality in BPS. Can we use this function to upload around 80,000 records at a time.
    We are unable to upload more than 1000 records because throws a time out error. Is there a setting that we can change to resolve this?

    Hi,
    Can you check the following note  about BW system parameters :
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=192658]
    Check the work Process time set for your BW system
    Is your application web based ?
    Pratyush

  • Does 4G drain the battery more than 3G with the iPhone 5?

    Hi im due an upgrade and im thinking about getting 4G, but does it drain the battery more than it does with 3G with the iPhone 5?

    the phone can handle it or else it wouldn't be supported. it can also handle LTE which is even faster than 4G in most cases

  • I have more than 1000 contacts in my etisalat sim card, but when I import the contats its stop at 750 contacts, what is wrong? i read the phone can carry thousands of contacts..what shall i do?

    I have more than 1000 contacts in my etisalat sim card, but when I import the contats its stop at 750 contacts, what is wrong? i read the phone can carry thousands of contacts..what shall i do?

    Thanks, it seems that it doesn't like to play games, which is a bit of a bummer as i bought this specifically because it was capable of doing that.  To be fair, it is capable... I just need to get used to a sound like sitting by a washing machine on spin cycle...  Wish they would make people aware of this in the Apple Store, its very misleading and not at all desireable.

  • Trouble with the SQL smt to :list tables having more than 1000 rows

    Please I trying to list only tables having more than 1000 rows, but the sql stmt below doesn't work, can someone gives me a tips
    select table_name from user_tables where table_name in ( select table_name from user_tables where rownum > 1000 ) : The result is no rows!
    But I know that I have at lest 50 tables having more than 1000 rows
    Thanks a lot for the help

    If your tables are reasonably analyzed, then you can simply query:
    SELECT table_name,
           num_rows
      FROM user_tables
    WHERE num_rows >= 1000This will give you quite a reasonable estimate.
    Otherwise you have to go for dynamic sql or use the data dictionary to help you generate suitable scripts ....

  • Update the authorization object value for more than 1000 role

    I need to remove one of the activity value (06) from authorization object S_SCD0.
    I do a search and found out that there are more than 1000 roles which having the activity value = 06 for authorization object S_SCD0.
    However, I don't think I can create a SCAT script to update all these 1000 roles and I believe its going to be a very tedious if I am going to manually change it one-by-one. Hence, I am wondering is there any standard program/function which I can use to automate the above changes for all these 1000 over roles.
    Kindly advise.
    Thanks

    Direct update the table is the easiest way, but should be discourage for the obvious reason.
    Should take a step back, take a long term view, when you need to update 1000 roles, maybe a role redesign might be needed. For example, if you can change the role model to derive role model, once update to the parent role will take care of all the child role.
    Thanks,
    Lye

  • I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    I'm trying to change my secret question because I forgot to answer.
    Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    See this thread:
    https://discussions.apple.com/message/23280567#23280567

  • TS1702 why can't i update the app more than 50mb from itune but can throught wifi?

    I tried to update Apps more than 50mb through itune, but found the Apps which are needed to be update are mark "Downloaded" in iTune store.  Of course if the Apps mark "Downloaded" are not able to do anything with it.  On the other hand, I can simply use wifi to update the Apps, more than 50mb, throught my iphone instead of iTune.  Is there any problem with iTune or something wrong with my phone?

    In the App section of your itunes library ( NOT the sync pages) there is a button at the bottom which says Check for updates

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Hi anyone please help .. i am facing issue with acrobat 11 pro version, in acrobat 7  we are able to compare 2 pdfs which are having more than 1000 pages but in acrobat 111 pro it not possible , if try do so acrobat will unresponsive.. please let me know

    please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
    Acrobat

    please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
    Acrobat

  • ORA-24335 - cannot support more than 1000 columns - How to solve this?

    Hi,
    I got error message 'ORA-24335 - cannot support more than 1000 columns ' when i try to insert x no of rows for a table with following code:
    INSERT ALL
    INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
    INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
    INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
    SELECT *
    FROM DUAL
    How to solve above?
    What does it really mean? It's not as easy as if my table has 10 columns than I can't insert more than 100 rows (1000 columns divided with 10 columns = maximun 100 rows to insert), or?
    Is there a better/more appropriate way to do insert many rows?
    Should I do my inserts with an OracleTransaction (My application is developed with C# and asp.net), as ~follows
    BEGIN
    INSERT INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
    INSERT INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
    INSERT INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
    COMMIT
    END
    Thx in advance!
    Edited by: user8819407 on 2010-mar-07 15:40

    Hi,
    So how did you solve the problem? Can you please give an example?
    I have the same problem inserting over 1000 values into my Oracle DB. The table only has 51 columns but to speed up the insert command, I use bulk inserts via insert all command. I need to insert 100 rows at a time for a total of 5100 values.
    Example:
    SQLCmd = INSERT ALL INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
    INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
    INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
    INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
    SELECT 1 FROM DUAL
    SQLVals = 1 22C38299 80700334 04-19-2012 13:55:33 mm-dd-yyyy hh24:mi:ss MCC93000 04/19/2012 13:55:42 mm-dd-yyyy hh24:mi:ss 12 4 0.792191 23 1 0.00 -113.50 13.48 9 1 9
    1 36PR7038 8070EDC2 04-19-2012 12:24:35 mm-dd-yyyy hh24:mi:ss MCC60360 04/19/2012 12:24:41 mm-dd-yyyy hh24:mi:ss 7 4 0.757501 3 2 13.88 -114.80 14.06 5 1 6
    1 42C63512 8050166F 04-19-2012 16:02:50 mm-dd-yyyy hh24:mi:ss MCC52420 04/19/2012 16:02:57 mm-dd-yyyy hh24:mi:ss 10 4 0.778471 8 1 0.00 -122.30 13.05 8 1 7
    1 33MR3076 80803E75 04-19-2012 13:13:16 mm-dd-yyyy hh24:mi:ss MCC60330 04/19/2012 13:13:22 mm-dd-yyyy hh24:mi:ss 13 5 0.636721 28 3 0.00 -122.19 0.70 8 1 6
    Then I call: &DBInsert($sqlCmd, @sqlVals);
    This is the error I get: ORA-24335: cannot support more than 1000 columns.
    I need to insert about 879,500 rows (51 cols per row). The values I read from a text file in sets of about 48,000 and put them into a hash. I tried inserting one row at a time, but it takes too long, about 28 hrs! Then, I tried the bulk update with only 6 rows and the total time was about 25 minutes. Which is acceptable to us.
    Thanks!

  • How can i get more than 1000 items in Custom List Displaying Items?

    http://.....sites/_vti_bin/listdata.svc/AddressBook(List) allows 1000 items Only my AddressBook List, but i have more than 1000 items in my AddressBook list. I want to get items
    from AddressBook list and bind in another place using Autocomplete method like this.
    =======>>>>listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook.
    and my coding in camel like below
    protected void btnpopulatedetails_Click(object sender, EventArgs e)
    SPSite objSite = SPContext.Current.Site;
    SPWeb objWeb = objSite.OpenWeb();
    objWeb.AllowUnsafeUpdates = true;
    SPList list = objWeb.Lists["Address Book"];
    SPQuery query = new SPQuery();
    query.QueryThrottleMode = SPQueryThrottleOption.Override;
    query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + txtcustomer.Value + "</Value></Eq></Where>";
    query.RowLimit = 500;
    SPListItemCollection items = list.GetItems(query);
    function fnCustomerSearchBind() {
    if ($("input[id$='txtcustomer']").length != 0) {
    var collcustomer = searchCustomers('', urlTo, fieldto);
    $("input[id$='txtcustomer']").autocomplete({
    source: collcustomer,
    //maxLength:10,
    select: function (event, ui) {
    //debugger;
    event.preventDefault();
    $("input[id$='txtcustomer']").val(ui.item.value);
    $("input[id$='btnpopulatedetails']").click();
    return false;
    minLength: 0,
    function searchCustomers(value, listurl, fieldto) {
    var collcus = new Array();
    var custresults;
    var url =listurl + "?$filter=startswith('" + fieldto + "','" + value + "')";
    //debugger;
    $.ajax({
    cache: true,
    type: "GET",
    async:false,
    dataType: "json",
    url: url,
    success: function (data) {
    custresults = data.d.results;
    //alert(listurl);
    // alert(data.d.results);
    for (var x = 0; x < custresults.length; x++) {
    //alert(custresults[x]['To']);
    collcustList.push(custresults[x]['To']);
    //debugger;
    //debugger;
    return collcustList;
    In my research listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook has 1000 items in 1st Page by default, So how to change 1st Page by default to All Pages through
    code. I think you understand my environment by look above coding, if you don't I am using office 365 sandbox solution. One more thing i know through my research Pages can be change by using Ado.Net Data Service, i tried this one but this one support windows
    server 2008 r2 only but i am using Windows Server 2012 r2. Please help me if you know the answer.

    Hi,
    Here is a blog would be helpful:
    ADO.NET Data Services returns 1000 items
    https://gilleslauwers.wordpress.com/2010/12/08/ado-net-data-services-returns-1000-items/
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I am running a strain gage test and can't get more than 1000 samples

    A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
    If the loop is stopped rather thanhaving the file verified an error is listed:
    Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
    The given possible reason given is: attempted to read a sample beyond the final sample acquired.
    When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
    I have made screen shots of the VI and the error code to assist finding the incorrect programing.
    Thank you for your help.
    Jim Steinmeyer
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    strain test error.doc ‏493 KB

    Thank you,
    I was just thinking about being able to increse the size of the doc.  for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
    Jim
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    block diagram.JPG ‏134 KB
    DAQmx.JPG ‏129 KB

Maybe you are looking for

  • Access custom variable value in web.xml context-param?

    My requirement or need is to access a variable value either in a class in my Model project or a backing bean in my View project. For example, one variable I need to access is an application server I am integrating with - 'testserver' or 'productionse

  • Content based Routing?

    Hi Forum, I've looked through the messages regarding content based routing or similar's but the answers did not satisfy my needs. I have an XSLT mapping from a flat file structure to an IDOC. To qualify the receiving system I have to do a database lo

  • How to use static files

    Hi everybody I have a html file which i uploaded to static files section in apex. So now i want to use that html file as inline frame or iframe like <iframe src="#...#new1.html" height="400" width="600"></iframe>for image i am using #WORKSPACE_IMAGES

  • Would like some input on models please.

    I have been Mac user for years and want to get an Ipad but like most money is tight, Have a friend that has a brand new 64gig IPad 1 in box never used. Only want one to use when travial for email, online banking, a little surfing and a few movies and

  • Which: Export AE Render Queue ? PP Export Media ? Media Encoder?

    The output of my PP and AE project ( combined video and animation ) looks terrible when exported or queued in PP or the CS5 Media Encoder. It renders slow and has shown poor performance in the Mac OS X Activity Monitor. When output to the AE queue ..