Speedster Hangs after Post
I have had this system running for over a year now.
AMD Opteron 2356 (Barcelona's) x2
PC&PC 860W Single Rail PSU
16 GB RAM (has only been at 16 GB for about 3 months
dual ATI 4850 HD 's (run 3 HP LP2465's)
It has worked for well over a year like I said.
the other day I was downloading some Linux ISO's I needed and just surfing around. When the left monitor just shutdown and went to sleep. I didn't think much more than a jiggled cable. I began to move when the whole machine went down. but it would reboot just fine, with out the 3rd monitor running. I have determined that the graphics have gone out. I am still hunting down an affordable replacement. But today after letting the machine sit for a couple days while I worked on the servers. I went to turn it on. it will go to the POST screen and has yet to make it past there. RAM has hung at roughly 2, 3, 4, 13, 14 GB.
I have no idea what is going on. I have tried pulling the bad card and it will still only post all the way to 16GB and then thats it
no BIOS no nothing.
Any Idea's?
I ever re seated the BIOS, and jumped it. checked the battery. Got it booting some how, think I got the standoff to quit grounding. its booting consistently. Now I still lose the bottom GC after some time. Right now that card won't output at all. So I just put in the 4850x2 and its not outputting anything either but it is booting all the way to Ubuntu. I just don't have video
(I know its going to Grub>Ubuntu because I set the BIOS to run the floppy at start so it would make noise so I knew it made it past POST.)
And neither of the 3 cards have video now. Could the PCI-E slots have gone bad?
Similar Messages
-
Firefox 8 hangs after posting updates to wordpress site
After upgrading to Firefox 8 (then 8.0.1) I can browse the internet fine, but when I edit a post on my wordpress blog, and click update, it hangs and spins. When I check the site on my phone I see the site took the update but I can't access it anymore through the computer. Only after rebooting can I access the site once more. I'm running Windows 7 on a PC
Your Firewall does not recognize the new version of Firefox and is blocking it from connecting. Clear all instances of Firefox from your Firewall programs list. Let your Firewall re-detect the new version of Firefox and give Firefox the necessary permissions in your Firewall. See:
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Firewalls -
MSI k8n neo platinum hangs after post single beep
Today I powered off my computer, and when I tried to power it back up the x850 fan just runs at full speed, and never drops to idle and the screen stays dark. If I reset the bios then it will post as far as asking to press Del to enter setup, but freezes at that point. This thing has been running like a champ and this is the first problem I've ever had! I unhooked/unplugged everything but the keyboard/video/ram/cpu. Tried running with four different memory modules in single channel and dual channel but no luck there either. None of the hardware below has been changed in the last six months. Any ideas? TIA!
The indicator lights read:
R G
R G
According to the manual this means:
Testing Base and Extended Memory
Testing base memory from 240K to 640K and extended
memory above 1MB using various patterns.
AMD 64 4000+
MSI K8N Neo Plat Rev1
PQI BH5 512x2
ATI x850 AGP
SATA 10k RPM Primary
Antec P/SQuote from: flobelix on 07-February-07, 07:09:19
Core2Duo E6400 would be a gain of about 15% compared to 4000+ ( in games 1024x768, no aniso or aa). Quality options and better resolution would shorten the gain. Other applications than games e.g. cinebench would run a lot faster on the C2D. The main advantage compared to the 4000+ would be dual core because many future games will be optimized for this. Question is: Is this worth $272?
With only one 7600GT installed you won't be able to play most of the new games in full detail because of lacking 3d power although Core2Duo installed. The gain of cpu performance will be therefor useless (if main focus is on gaming). 7600GT sli-array would be an option for full detail and using more cpu power but it would also be slower than one 7950GT for nearly the same amount of money spent for 2 7600GT.
1. If you need a gaming pc I'd only buy a new C2D if you can also afford high end vga. Otherwise cpu power is wasted.
2. 7600GT is only an option if you want to save money now and you want a second one later. Buying two now to get a sli-array isn't very clever. Less performance than 7950GT, same price.
3. Buying one gig of ddr2 isn't very clever either. More and more applications need more than 1 gig (for example vista!). When changing to ddr2, change to 2 gig dual channel kit.
4. Getting $300 for your old stuff seems quite optimistic to me.
Conclusion: Save your money for better vga! Take back 7600gt, keep old vga and 4000+, wait for a little time and buy Geforce 8800 GTS. Increase of gaming performance would be unbelieveable. After providing high end vga you can upgrade to C2D in next step and receive a noticeable increase of performance in all kinds of applications.
Hmm.. very good points. I went and read some reviews of the upcoming 8600 and 8800. They are quite impressive for the money. I believe I'll return everything and find a limp-a-long $50 mobo to replace the dead msi. It looks like holding out for quad core with dual SLI is the real gain over my current setup. On a side note I won't be running vista until after sp1 or possible sp2. No tangible benefit to me! What suggestions do you have for a solid performing mobo for the following:
socket 939
4 240pin DDR slots
AGP (My X850 XT is still strong enough for everything I do)
SATA 1.5 (no need for the faster one as I have none of those drives) -
CIN : After Posting "Only Part 1" in GR, MIRO is hang.
Dear Expert!
I have MIRO problem.
After Posting "Only Part 1" in GR, MIRO is hanging.
If I press ENTER After input PO no in MIRO.
There is no error. But, It's hanging...
If we post part 2, it's OK.
Plz help me.
How can I solve that??
We are using ECC 6.0.
Thanks.
Edited by: KeunChan Lee on Oct 20, 2009 3:28 PMTill you post the excise invoice i.e. do the Part 2 entries, MIRO will not happen. Thats a standard functionality. You have to first post the excise invoice then only you will be able to post MIRO.
-
System hangs at POST after reboot
I have a Dell L400 laptop (p3 700mhz 256mb 20gb hd) and have sucessfully installed arch along with xfce and a few other programs. Everytime I reboot via "reboot" cmd or through xfce, the system unmounts everything and reboots but hangs at the POST screen. I cant get into bios or the boot option menu either. I also have a stripped down windows xp installed (before arch) and i can reboot from there. any ideas on whats going on?
Hi, I have exactly the OPPOSITE problem from you. Windows won't do a warm restart - hangs after the POST. Arch WILL do a warm restart. I still haven't figured it out. I am assuming that Windows is messing up something in the hardware that mucks up the restart and Arch isn't. Since you and I have different hardware for sure, you are likely experiencing the same sort of problem, but from a different source!
In my case, a simple power cycle resolves the problem and Windows boots properly. However, it will only boot from a power on. It will never boot from a warm restart. -
Satellite U400-22n and Win7 - screen hangs after 5 min
Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed... -
Powerbook G4 hangs after few minutes of usage
Since February 06 I have a PB G4: 1.67GHZ, model Powerbook5,8
Since this weekend it hangs after a few minutes of usage.
I tried a whole load of possible solutions, like resetting the RAM, removing the battery and holding the powerbutton for 5 seconds...I even held it once for half a minute, but that didn't help. Checking the harddrive with disk utility (tried it often, but only once did the PB work long enough to get the end result: hard drive is healthy).
Often, when it hangs, I can get it to work by simply turning it off and on again. That gives me another window of 2 minutes of usage! Handy throughout the day when I need a file, or a document: I simply boot the machine, get the file and shut it down.
Carbon copy to an external HD does not work: the system hangs a few minutes after copying.
I installed a utility named applejack, and the first time I tried it, I got an interesting error: there were errors with the USB controller or USB bus, and system hangs. I didn't make a screenshot so this is out of the top of my head.
This was interesting because when I tried to make a HD copy (and believe me: I tried lots and lots of times), the system freezes first, and then an error about not unmounting a device popped into the screen. As if the touchpad, keyboards, and all other i/o devices stop working, and the system goes on for a few seconds more.
Sometimes the system just hangs, sometimes I get that black kernel panic screen.
Just before writing this, I tried the hardware test on the install CD once more:
Held down the option key, chose the hardware test -> quick test and..
system hangs after completion of the test
A message appeared in the bottom-left corner. Several lines of information, starting with:
"ERROR, Write to location ZERO detected!!, Loc zero was originally zero
Current File: Localization/en/Scripts/enAHTscript.sc"
etc
I live on a nice island in the Caribbean, so popping into the nearest Apple store means getting on a flight to Miami first.
What -if any- are my options? Is there something I can try to do myself before shipping it to Apple? Opening the case, checking this or that?
By the way, I originally posted this in the Titanium folder, but someone mentioned that I might actually have a Aluminum PB.
see http://discussions.apple.com/message.jspa?messageID=2074854#2074854hi joeuu,
I have 1.5GB mem: one 512 stick and one 1GB and I already tried the sticks one at a time: it hangs with the original 512, it hangs with the 1GB and it hangs with them together in both possible slot settings.
I managed to copy the panic.log in /Library/Logs/ and here it is:
Fri Apr 7 15:27:21 2006
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 00000000000AF340, msr = 0000000000141020, dsisr = 42000000, dar = 000000000280C200
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x41381A00)
PC=0x000AF340; MSR=0x00141020; DAR=0x0280C200; DSISR=0x42000000; LR=0x000AF158; R1=0x2211B8E0; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x404E9F24 0x404E1F6C 0x404E7B2C 0x002CEFB8 0x41C3F2C8 0x002BC0E8
0x002CDA70 0x002BC690 0x002BBB4C 0x002BBA5C 0x404E3954 0x404E3B98 0x002CE900 0x002CD7C8
0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBTrackpad(1.3.0f1)@0x41c3d000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOHIDFamily(1.4.3)@0x32671000
com.apple.driver.AppleUSBOHCI(2.2.5)@0x404df000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x323bf000
Exception state (sv=0x402ABA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj~1/RELEASE_PPC
Now what can we read from this?
I see in here "AppleUSBTrackpad" and "AppleUSBOHCI".
Referring to my original post: I have seen an error (a few days ago, when working with applejack) that also mentioned USB.
I'm very afraid that this is a hardware issue. Reading through some other posts, I saw something about a ribbon that gave problems. What are your thoughts? -
Database is Hanging after executing the Procedure ...
Dear All i am using 10G.
I Have a procedure . After executing the Procedure when i try to call that procedure it is hanging ...
it is creating Locks .. As our DBA told..And told to check the code ...
Can any one tell me how can i put mu codes with formatting ? When i copy paste my code it is showing properly but after POST MESSAGE it is showing like i have written history ...--*
I am Executing the procedure like this ...
EXEC simulator_validation ('0|BP-V1|20101004|01|1|2430962.89|27|2430962.89|MUR|20100928120106','04-SEP-2010',27,2430962.89,'MUR','000111111111');
And my code is :-
{Create Or Replace Procedure simulator_validation (lstring varchar2,ldate date,lno_item number,ltotal number,lcur varchar2,lac_no Varchar2)
IS
l_swift_code_acno number;
l_ACno_Valid number;
l_swift_code_others Number;
lpcode varchar2(5);
lCcode Varchar2(4);
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LToken VARCHAR2(100) ;
i PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
lcol number:= 1;
Begin
lfirst_char := Substr(lstring,0,1);
Dbms_output.put_line(lfirst_char);
IF lfirst_char = '0' Then ------------------- For the 1st Line - Should be start from 0
Loop
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue='BP-V1' THEN
Dbms_output.put_line('1');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0003','Invalid file type and version number');
Dbms_output.put_line('2');
End if;
Elsif lcol=2 then
If lvalue=To_Char(ldate,'YYYYMMDD') THEN
Dbms_output.put_line('3');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0004','Due date differs from the value inputted in the loading screen');
Dbms_output.put_line('4');
End if;
Elsif lcol=3 then
Begin
Select PAYMENT_PURPOSE_CODE into lpcode
From MU_PURPOSE_CODE
Where PAYMENT_PURPOSE_CODE = lvalue;
IF lpcode = lvalue Then
Dbms_output.put_line('5');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
Dbms_output.put_line('6');
End If;
Exception
When No_data_found Then
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
End;
Elsif lcol=4 then
If lvalue='1' THEN
Dbms_output.put_line('7');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0008','Total number of debit records in header does not tally with number debit records in the file.');
Dbms_output.put_line('8');
End if;
Elsif lcol=5 then
If lvalue=ltotal THEN
Dbms_output.put_line('9');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0010','Total debit transaction amount in header does not tally with the sum of debit transaction amount in the file');
Dbms_output.put_line('10');
End if;
Elsif lcol=6 then
If lvalue=lno_item THEN
Dbms_output.put_line('11');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0025','Number of credit records does not tally with credit records in the file.');
End if;
Elsif lcol=7 then
If lvalue=ltotal THEN
Dbms_output.put_line('12');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0026','Sum of credit records does not tally with total transaction amount as inputted in the loading screen');
End if;
Elsif lcol=8 then
If lvalue=lcur THEN
Begin
Select Cur_CODE into lCcode
From Mu_currency_Code
Where Cur_CODE = lvalue;
Dbms_output.put_line('13');
Exception
When No_data_found Then--------------------
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0014','Invalid Currency');
End;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0013','Currency differs from the value inputted in the loading screen');
End if;
Elsif lcol=9 then
If lvalue=Null THEN
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0015','Timestamp should not be null');
Elsif lvalue <> lvalue Then
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0046','Timestamp in header should be in the format YYYYMMDDHHMMSS');
End if;
End IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End LOOP;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
End if ;}
-------------------- For the 2nd Line , should be start from 9 .-----------------------------
{ lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '9' Then
LOOP
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue < 0 THEN
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero');
Elsif lvalue = ltotal THEN
Dbms_output.put_line('20');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0018','Transaction amount differs from the value inputted in the loading screen');
End if;
ELSIF lcol = 2 THEN
If lvalue = Substr(lac_no,4,9) THEN
mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0020','Account number differs from the account number inputted in the loading screen');
End if;
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('21');
End if;
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
End IF; }
-------------------- For the 3rd Line Should be start from 1.--------------------------
{ LOOP
lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '1' Then
Loop
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue > 0 THEN
Dbms_output.put_line('24');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero'); End if;
ELSIF lcol=2 then
Mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
Mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('26');
End
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
End if;
END LOOP;
Commit;
End;}
Edited by: LuKKa on Oct 4, 2010 9:20 PM
Edited by: LuKKa on Oct 4, 2010 9:25 PMYes i gave {} but it is also coming like this ...Yes, since you should use {noformat}{noformat} before and after your example, and not putting your example between a '{' and a '}'.
So, when you post/type/copypaste:
{noformat}select *
from emp;{noformat}
on this forum, it will appear as:select *
from emp;See the FAQ for more tags/tips:
http://forums.oracle.com/forums/help.jspa -
Update to Firefox 3.6.17 hangs after Checking Compatibility of Java Console - I have sceenshot
Update to Firefox 3.6.17 hangs after Checking Compatibility of Java Console - I have a sceenshot
I promised a screenshot, but you did not provide a way to submit it with the original post!
-
My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution
Thanks for your response and good luck wishes, I suspect I will need them!
In principle, I agree re: the manufacturer's warranty. However, I am pretty upset that this is now my second iPod to develop a critical fault within weeks of the warranty expiring, and frankly, it is not unreasonable to expect a state-of-the-art $500 electronic device to last well beyond one year of life.
I agree talking to Apple is not likely to do me any good (the clue is in how impossible they make it to talk to them in the first place) - but that is not necessarily OK. I expect I will have to pay money to get the battery replaced - again, not OK (full stop - but especially given the cost of the device and the money I have spent with Apple). Yes, the batteries have a limited lifespan, but it should last longer than this (and surely, I should notice a gradual decline in its functionality, not an instant stop).
I will try Deggie's suggestion (see my reply post), but probably won't hold my breath (think I have already done this). I probably will have to get the new battery - and probably under my own steam. It is a principle at stake and I feel I should be able to let Apple know how I'm feeling - and am frustrated that they make this virtually impossible. It sends the very clear message that they are not interested in listening to their customers. -
Windows Server 2012 Hangs After a While
Good day,
My server hangs after a while then I have to hard boot it. I get the error 'Online data retrieval occurs under all my roles. Once I reboot it then the error disappears.
Please help!!
Thanks,
MaoFirst of all, you would need to make sure that your server meets the hardware requirements to run Windows Server 2012 + the applications you use.
For Windows Server 2012 System Requirements, you can refer to that: https://technet.microsoft.com/en-us/library/dn303418.aspx
You can also proceed like the following:
Install available Windows Updates (To be tested first)
Install recent versions of your drivers, firmware and BIOS
Uninstall all unused programs
Run chkdsk /r /f and sfc /scannow
Do a clean boot
If this does not help then you can temporary disable security software in use and try again.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
ADF application hangs after $$added root$$ message in the logs
Hi ADF Gurus,
We have an ADF application which freezes after we create a row in a particular VO,
When debugged in Jdev, the application seems to hang when either of the below log messages appear. Does anybody know what these messages mean? Just hoping for some hint as to where the problem might lie. The table where the new row is added has about 150,000 records in it
Log messages:
<PCollNode> <checkForSplit> [50545] $$added root$$ id=-2
<PCollNode> <checkForSplit> [50546] $$added root$$ id=-73
<PCollNode> <checkForSplit> [50636] $$added root$$ id=-2559
Environment details:
Jdev: 11.1.1.5.0
Database:11g
Thanks
-Venkatduplicate post: ADF application hangs after $$added root$$ message in the logs
-
to reproduce:
1. click on a flash button that takes you to a new html page
2. hit the back button on browser
3. flash button hangs
I've included a test page as an example below.
the bug is specific to having used the flash button and is specific to the Mac version of firefox. The PC version seems to work fine.What is the address of the first page? The only thing that link you posted in your information was the page that says, "now hit the back button and see if flash hangs after clicking on the flash button".
-
Itunes hang after latest updates
Since the last updates to my iMac iI find that the iTunes is constantly Hanging. It does not matter if I'm not using iTunes, as soon as its working in the background it hangs sooner or later. When I work with my music files in iTunes it usually hangs after less than 30 minutes.
How can this be?
I do not want to start with a new music player since I have used iTunes for the last 10 years and I have all my music in it.
But the way its acting now it seem like I have to use something else since iTunes is simply not working properly.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mail hangs after a few seconds
Just this evening, about an hour after I downloaded the MobileMe update, my Mail app started hanging after about 4 seconds. Totally unresponsive, beachball of doom etc requiring a force quit. I've tried most of the suggestions I can find here (deleting To-do lists, turning off synching, moving plists, repairing drives etc) but nothing seems to work.
Logic points to the MobileMe update (I have a new 3G iPhone that seems to be working and synching ok), but I'm kind of stuck with no mail on my main machine and was wondering if there was anything else I could do rather than sit in and wait for an Apple update (providing there will be one).
Many thanks in advance (and apologies if I've pasted the wrong part of the report here -I had no idea what to post)
Date/Time: 2008-07-13 22:58:55 +1000
OS Version: 10.5.4 (Build 9E17)
Architecture: i386
Report Version: 4
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Version: 3.4 (928)
Build Version: 1
Project Name: Mail
Source Version: 9280000
Parent: launchd [76]
PID: 254
Event: hang
Time: 6.52s
Steps: 41
Process: Mail [254]
Path: /Applications/Mail.app/Contents/MacOS/Mail
ADDRESS BINARY
00001000 /Applications/Mail.app/Contents/MacOS/Mail
002de000 /System/Library/Frameworks/Message.framework/Versions/B/Message
00687000 /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
00690000 /System/Library/Frameworks/LatentSemanticMapping.framework/Versions/A/LatentSem anticMapping
006f7000 /Library/InputManagers/1PasswdIM/1PasswdIM.bundle/Contents/MacOS/1PasswdIM
15960000 /Users/fulldark/Library/Mail/Bundles/httpmail.mailbundle/Contents/MacOS/httpmai l
15e07000 /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
161e4000 /System/Library/TextEncodings/Unicode Encodings.bundle/Contents/MacOS/Unicode Encodings
16457000 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
164d0000 /usr/lib/liblangid.dylib
17e91000 /System/Library/Frameworks/Message.framework/Versions/B/Resources/Syncer.syncsc hema/Contents/MacOS/Syncer
17ec2000 /System/Library/PrivateFrameworks/SyncServicesUI.framework/Versions/A/SyncServi cesUI
Thread id: 76d8f20
User stack:
41 ??? [0xfb29e]
41 _NSApplicationMain + 574 (in AppKit) [0x94e42030]
41 -[NSApplication run] + 795 (in AppKit) [0x94e74df3]
41 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128 (in AppKit) [0x94e7bdb8]
41 __DPSNextEvent + 657 (in AppKit) [0x94e7c505]
41 _BlockUntilNextEventMatchingListInMode + 106 (in HIToolbox) [0x9112ea31]
41 _ReceiveNextEventCommon + 175 (in HIToolbox) [0x9112eaf6]
41 _RunCurrentEventLoopInMode + 283 (in HIToolbox) [0x9112eda4]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 _CFRunLoopRunSpecific + 844 (in CoreFoundation) [0x9386dd1c]
41 _CFRunLoopDoObservers + 466 (in CoreFoundation) [0x9386c9c2]
41 __handleWindowNeedsDisplay + 436 (in AppKit) [0x94e7e660]
41 ??? [0x1f7a2]
41 -[NSWindow displayIfNeeded] + 189 (in AppKit) [0x94e7e83d]
41 -[NSView displayIfNeeded] + 869 (in AppKit) [0x94e7ec4f]
41 -[NSView _sendViewWillDrawInRect:] + 1015 (in AppKit) [0x94f3c902]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSSplitView viewWillDraw] + 81 (in AppKit) [0x94fd14ae]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSView viewWillDraw] + 579 (in AppKit) [0x94f3d220]
41 -[NSTableView viewWillDraw] + 72 (in AppKit) [0x94f84641]
41 -[NSTableView tile] + 285 (in AppKit) [0x94f5a658]
41 -[NSTableView _totalHeightOfTableView] + 129 (in AppKit) [0x94f5af18]
41 -[_NSTableRowHeightStorage computeTableHeight] + 39 (in AppKit) [0x9506a1ad]
41 -[_NSTableRowHeightStorage createAndCacheRowHeightSumsIfNecessary] + 294 (in AppKit) [0x9506a2de]
41 -[_NSTableRowHeightStorage _cacheRowHeightsIntoBucket:bucketFirstRowIndex:lastCacheableRowIndex:] + 102 (in AppKit) [0x9506a38e]
41 -[NSTableView _uncachedRectHeightOfRow:] + 78 (in AppKit) [0x9506a49f]
41 -[NSOutlineView _sendDelegateHeightOfRow:] + 58 (in AppKit) [0x9506a63a]
41 -[NSOutlineView itemAtRow:] + 78 (in AppKit) [0x94f0ce61]
41 _loadItemEntryLazyInfoIfNecessary + 418 (in AppKit) [0x94f0d08a]
41 -[NSOutlineView _dataSourceIsItemExpandable:] + 125 (in AppKit) [0x94f0d20f]
41 ??? [0xf95f]
41 ??? [0xfaa5]
41 ??? [0xf403]
41 -[SpecialMailboxUid numberOfVisibleChildren] + 34 (in Message) [0x2ebba2]
41 +[MailAccount sentMessagesMailboxUids] + 44 (in Message) [0x3dd893]
41 +[MailAccount _specialMailboxUidsUsingSelector:] + 274 (in Message) [0x3d9838]
41 ___forwarding__ + 272 (in CoreFoundation) [0x938ed6e0]
Kernel stack:
37 usertrap + 853 [0x1a9034]
36 exceptiontriage + 230 [0x12b77a]
34 exceptiondeliver + 503 [0x12b43d]
32 mach_exceptionraise + 179 [0x14993e]
29 mach_msg_rpc_fromkernel + 290 [0x12d7a1]
28 ipc_mqueuereceive + 750 [0x120eaa]
28 threadblock + 33 [0x136ac0]
18 threadcontinue + 1181 [0x136853]
7 thread_blockreason + 135 [0x136a1c]
7 threadsetrun + 3173 [0x135f10]
7 machineidle + 278 [0x1a2aab]
3 ml_set_interruptsenabled + 47 [0x1a2389]
1 ml_set_interruptsenabled + 47 [0x1a2389]
2 mach_msg_rpc_fromkernel + 185 [0x12d738]
2 ipc_kmsgsend + 278 [0x12017e]
2 ipc_mqueuesend + 418 [0x120bb2]
2 ml_set_interruptsenabled + 47 [0x1a2389]
1 mach_msg_rpc_fromkernel + 41 [0x12d6a8]
1 ipc_kmsgalloc + 18 [0x11d909]
1 mach_msg_rpc_fromkernel + 177 [0x12d730]
1 mach_msg_rpc_fromkernel + 16 [0x12d68f]
1 exceptiondeliver + 456 [0x12b40e]
1 mutexunlock + 252 [0x19adac]
1 exceptiondeliver + 466 [0x12b418]
1 _mutexlock + 68 [0x19a934]
1 exceptiondeliver + 120 [0x12b2be]
2 loalltraps + 231 [0x19ecd7]
1 exceptiondeliver + 918 [0x12b5dc]
1 PE_incominginterrupt + 131 [0x447fe8]
1 lapicinterrupt + 300 [0x1af7ce]
1 sync_iss_toiks + 114 [0x1a7fa8]
Thread id: 69346b0
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[RSSInterchange _runManager] + 2140 (in Message) [0x3d3f35]
41 -[NSRunLoop(NSRunLoop) run] + 84 (in Foundation) [0x915475c4]
41 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 213 (in Foundation) [0x9153b4a5]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 mach_msgtrap + 10 (in libSystem.B.dylib) [0x961b74a6]
Thread id: 85b0998
User stack:
41 __workqops + 10 (in libSystem.B.dylib) [0x9622107a]
Thread id: 76d8000
User stack:
41 ??? [0x0]
Thread id: 70447d8
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 fe_fragmentthread + 54 (in QuartzCore) [0x96aa5e51]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 805b000
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __Z22CFURLCacheWorkerThreadPv + 396 (in CFNetwork) [0x92071a32]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 mach_msgtrap + 10 (in libSystem.B.dylib) [0x961b74a6]
Thread id: 805b790
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320 (in Foundation) [0x9156a460]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 mach_msgtrap + 10 (in libSystem.B.dylib) [0x961b74a6]
Thread id: 85afa78
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[InvocationQueue _drainQueue] + 772 (in Message) [0x3d5fbe]
41 -[MonitoredInvocation invoke] + 409 (in Message) [0x3d63dc]
41 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x938ed468]
41 __invoking__ + 29 (in CoreFoundation) [0x938eda7d]
41 -[IMAPAccount fetchSynchronouslyIsAuto:] + 186 (in Message) [0x437051]
41 -[MailAccount todosMailboxUidCreateIfNeeded:] + 87 (in Message) [0x3d0ce1]
41 -[IMAPAccount _specialMailboxUidWithType:create:] + 89 (in Message) [0x3cdb29]
41 -[IMAPAccount _specialMailboxUidWithType:create:isLocal:] + 271 (in Message) [0x3cdde2]
41 -[IMAPAccount mailboxUidForRelativePath:create:] + 497 (in Message) [0x3cd41f]
41 -[MailAccount mailboxUidForRelativePath:create:] + 252 (in Message) [0x3c4c92]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 85afe40
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[InvocationQueue _drainQueue] + 772 (in Message) [0x3d5fbe]
41 -[MonitoredInvocation invoke] + 464 (in Message) [0x3d6413]
41 -[ActivityMonitor postActivityFinished] + 363 (in Message) [0x3d6f9c]
41 -[NSNotificationCenter postNotificationName:object:] + 56 (in Foundation) [0x9150cff8]
41 ??? [0x3910]
41 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128 (in Foundation) [0x915037b0]
41 __CFXNotificationPostNotification + 179 (in CoreFoundation) [0x9384fd93]
41 _CFXNotificationPost + 362 (in CoreFoundation) [0x9384faba]
41 _nsnotecallback + 106 (in Foundation) [0x9150654a]
41 ??? [0x3928f]
41 ??? [0x2a9ab]
41 -[POPAccount primaryMailboxUid] + 57 (in Message) [0x43c6b9]
41 -[MailAccount mailboxUidForRelativePath:create:] + 252 (in Message) [0x3c4c92]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 7b03410
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[InvocationQueue _drainQueue] + 772 (in Message) [0x3d5fbe]
41 -[MonitoredInvocation invoke] + 464 (in Message) [0x3d6413]
41 -[ActivityMonitor postActivityFinished] + 363 (in Message) [0x3d6f9c]
41 -[NSNotificationCenter postNotificationName:object:] + 56 (in Foundation) [0x9150cff8]
41 ??? [0x3910]
41 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128 (in Foundation) [0x915037b0]
41 __CFXNotificationPostNotification + 179 (in CoreFoundation) [0x9384fd93]
41 _CFXNotificationPost + 362 (in CoreFoundation) [0x9384faba]
41 _nsnotecallback + 106 (in Foundation) [0x9150654a]
41 ??? [0x3928f]
41 ??? [0x2a9ab]
41 -[POPAccount primaryMailboxUid] + 57 (in Message) [0x43c6b9]
41 -[MailAccount mailboxUidForRelativePath:create:] + 252 (in Message) [0x3c4c92]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 85b1c80
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[InvocationQueue _drainQueue] + 772 (in Message) [0x3d5fbe]
41 -[MonitoredInvocation invoke] + 464 (in Message) [0x3d6413]
41 -[ActivityMonitor postActivityFinished] + 363 (in Message) [0x3d6f9c]
41 -[NSNotificationCenter postNotificationName:object:] + 56 (in Foundation) [0x9150cff8]
41 ??? [0x3910]
41 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128 (in Foundation) [0x915037b0]
41 __CFXNotificationPostNotification + 179 (in CoreFoundation) [0x9384fd93]
41 _CFXNotificationPost + 362 (in CoreFoundation) [0x9384faba]
41 _nsnotecallback + 106 (in Foundation) [0x9150654a]
41 ??? [0x3928f]
41 ??? [0x2a9ab]
41 -[POPAccount primaryMailboxUid] + 57 (in Message) [0x43c6b9]
41 -[MailAccount mailboxUidForRelativePath:create:] + 252 (in Message) [0x3c4c92]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 85b0208
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[IMRemoteObjectBroadcaster _workerThread] + 246 (in IMUtils) [0x94df2dc7]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 mach_msgtrap + 10 (in libSystem.B.dylib) [0x961b74a6]
Thread id: 792d6b0
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 +[_NSSocket _runIOThread] + 98 (in Message) [0x2f910d]
41 -[NSRunLoop(NSRunLoop) run] + 84 (in Foundation) [0x915475c4]
41 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 213 (in Foundation) [0x9153b4a5]
41 _CFRunLoopRunInMode + 88 (in CoreFoundation) [0x9386ecf8]
41 mach_msgtrap + 10 (in libSystem.B.dylib) [0x961b74a6]
Thread id: 85aeb58
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _select + 10 (in libSystem.B.dylib) [0x962075e2]
Thread id: 85ae790
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 +[WorkerThread _execute:] + 144 (in Message) [0x3d729e]
41 -[MonitoredInvocation invoke] + 409 (in Message) [0x3d63dc]
41 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x938ed468]
41 __invoking__ + 29 (in CoreFoundation) [0x938eda7d]
41 ??? [0x386de]
41 ??? [0x17ea4c4b]
41 ??? [0x17ea5013]
41 -[NSObject(NSThreadPerformAdditions) performSelectorOnMainThread:withObject:waitUntilDone:] + 184 (in Foundation) [0x9155a9b8]
41 -[NSObject(NSThreadPerformAdditions) performSelector:onThread:withObject:waitUntilDone:modes:] + 938 (in Foundation) [0x9150739a]
41 -[NSCondition wait] + 210 (in Foundation) [0x9154ea02]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 85af6b0
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 +[WorkerThread _execute:] + 144 (in Message) [0x3d729e]
41 -[MonitoredInvocation invoke] + 409 (in Message) [0x3d63dc]
41 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x938ed468]
41 __invoking__ + 29 (in CoreFoundation) [0x938eda7d]
41 -[LibraryThread _runThread] + 403 (in Message) [0x366bd7]
41 -[ActivityMonitor addActivityTarget:] + 407 (in Message) [0x367332]
41 ??? [0x3910]
41 -[NSNotificationCenter postNotificationName:object:userInfo:] + 128 (in Foundation) [0x915037b0]
41 __CFXNotificationPostNotification + 179 (in CoreFoundation) [0x9384fd93]
41 _CFXNotificationPost + 362 (in CoreFoundation) [0x9384faba]
41 _nsnotecallback + 106 (in Foundation) [0x9150654a]
41 ??? [0xd826c]
41 -[MailboxUid tildeAbbreviatedPath] + 62 (in Message) [0x2f0441]
41 -[MailAccount tildeAbbreviatedPath] + 47 (in Message) [0x3c086f]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]
Thread id: 8c18ba0
User stack:
41 threadstart + 34 (in libSystem.B.dylib) [0x961e85b2]
41 _pthreadstart + 321 (in libSystem.B.dylib) [0x961e86f5]
41 __NSThread__main_ + 308 (in Foundation) [0x91506ac4]
41 -[NSThread main] + 45 (in Foundation) [0x91506f1d]
41 -[InvocationQueue _drainQueue] + 772 (in Message) [0x3d5fbe]
41 -[MonitoredInvocation invoke] + 409 (in Message) [0x3d63dc]
41 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x938ed468]
41 __invoking__ + 29 (in CoreFoundation) [0x938eda7d]
41 -[IMAPAccount _fetchUnreadCountsCheckForNewMessages:] + 1014 (in Message) [0x3386a6]
41 +[MailAccount mailboxUidForURL:] + 49 (in Message) [0x2f2fdb]
41 +[MailAccount mailboxUidForURL:forceCreation:] + 299 (in Message) [0x2f310e]
41 +[MailAccount infoForURL:] + 54 (in Message) [0x2f320b]
41 +[MailAccount _accountForURL:includeInactiveAccounts:] + 166 (in Message) [0x2f32cf]
41 +[MailAccount mailAccounts] + 38 (in Message) [0x3bf475]
41 __MFAcquireObjectLock + 66 (in Message) [0x2dfbc0]
41 __semwaitsignal + 10 (in libSystem.B.dylib) [0x961be68e]First of all, don't be trying random solutions unless you know what you're doing and why; you'll create a lot of trouble for yourself, and often it can't be fixed without a radical, time-consuming solution.
You seem to have httpmail running as a Bundle for Mail; disable it and then try starting Mail again to see if that resolves the problem. If so, that means you'll have to delete it, since it is conflicting with Mail and will cause it to hang or crash.
Mulder
Maybe you are looking for
-
I just realized that there are some apps I no longer have access to since the switch to iOS 5. So I followed the instructions, and there is no SOFTWARE UPDATE tab for me to click on under Settings-General.
-
Global functions without using unique AS file
Hi all, I'm tinkering around with things in AS3, and now that programming the reaction of buttons involves a bit more code, I'm trying to figure out how to kill a few redundancies. With the file I'm working with, at different points, using different
-
Hi, I have a report based on 'PL/SQL function returning SQL query'. The attribute 'Sort' is selected for all column headings. This report has links to branch to other pages. Is it possible to clear the Last Sorted column session information and get t
-
I try to restore my iphone but i got a message says unknown error
i try to restore my iphone but i got a message says unknown error
-
Error message when setting up .Mac email account on iPhone
Hi - I've tried Apple support, iphone support, and the submit a question/problem to the mac people with no luck. So, I'm taking my question to the next higher level -- you all. So here is the issue. I have had a mac email account for years. I buy my