SPELL_AMOUNT for getting amount in chinese

Hi All,
Whether FM SPELL_AMOUNT can be used to get the Amount in chinese characters. if yes how to use this FM for getting amount in chinese.
Thanks,
Preethi.

Hi Preethi,
Just try FM SPELL_AMOUNT with language CN.
It will give you the currency in Chinese Format.
Reward points, if useful.
Regards,
Nitin.

Similar Messages

  • How to get denomination of Notes ? for the amount paid

    Dear Freinds
       i have requirement where the total amount obtained by a employee through Cash . They wanted to have denomination
    for the amount paid ito that employee
    ex : An X employee got RS.5550 rupees as cash. They wanted to know how much money has been paid in Denomination
    of  10 Rupee notes,20 Rupee notes,50 Rupee notes,100 Rupee note,500 Rupee note & 1000 Rupee notes.
    so the data has to be displayed should be
    since the employee is gettign 5550 --> it has to 1000*5 --> Five Thousand rupees notes --- 5 count should come
    500 will be paid as ---> 500 * 1  -
    Five hudress count is 1
    50 is the balance -
    it will be paid as fivty note -- Count is 1.
    so i have to get  5000------ count 5 , 500 count 1,50 count 1. Can any one go this type of denomination doing code please
    let me know how to proceed.
    Regards
    divya
    Edited by: Divya Kumari on Jul 8, 2011 2:18 PM

    Actually
    the scenario is that in some employees ( if you go employee subgroup) like daily labour and casual labours will be paid
    on daily bais for them they will not be paid to bank . I n that case  those type of employees will be paid by CASH. So in teh month end the company wanted to knwo what type and how much money paid .
    regards
    divya

  • Itunes has charged my debit card and my gift voucher, how do i go about getting a refund for the amount charged to my debit card

    I recently got a free £25 itunes gift voucher, i used it the other day and the amount was deducted off the debit card. Having looked at my bank statement i found that i had also been deducted the same amount of my debit card. Long story short, itunes has charged my gift voucher & my debit card. How do i go about getting a refund for the amount deducted on my debit card.

    If the page that you postted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • 2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?

    2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?, what if I buy a movie later? i will get the same problem!!! still I do not know how the avengers ends!! please do not tell me haha, focus on the problem here!

    Welcome to the Apple Community.
    Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
    Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.
    I believe your issues are probably a network issue, which unless you resolve are likely to be repeated again.

  • Import format for two amount columns in different currencies

    Hello,
    I am working on FDM 11.1.1.3 and will be getting the trial balance containing amounts in two currencies (both local and USD). I need to load data in both the currencies. The extract has two columns for the amount rather than having two different rows for different currencies. Any ideas how to define this format and how to load data. We are not using the translation logic and hence the amounts in both currencies are required.
    Thanks for your help in advance.

    Hi Tony,
    Thanks a lot for the input. Any idea, how should I go about doing this else if you have any documentation, let me know. Also, what are the cons of doing it this way over requesting the customer to get the file with amounts in different rows than in different columns

  • Advance payment - TDS deducted but cheque printed for full amount

    Hello SAPians,
    Advance payment to vendor - TDS is applicable - SAP entry shows about TDS Deduction but the cheque printed for full amount.
    Cheque needs to be printed after TDS deduction.
    Please suggest.
    JK

    Hi in REGUH and REGUP tables there is no tds amount if you want to deduct the tds amount then while printing the cheque give the logic as in regup document you need to pass into WITH_ITEM table and if the document is matched then get the value against WT_QBSHH field and deduct this valu into your invoice amount.
    i have done this job in current client it will work properly.
    Let me know if you need further claification

  • Hi  When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

    Hi  When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

    downpayment percentage , so if i want 50 percent of order value to be paid  and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?

  • Struggling with Comma for an amount in sap script

    Hi Experts
    I am strugling with comma for an amount in sap script .
    For ex: 1234.56  and i need 1,234.56
    I tried  system->userprofile->owndata->Default(Tab)->Decima Notation 1,234,567..89(Selected)
    and i did use /:Edit Mask Field name  but i am not getting comma.
    Thanks & Regards
    Reddy

    Hello,
    In the driver program, assign the amount to a variable of type P and use that variable to display in the script. You will get the commas.
    Vikranth

  • Paymont form via fpl9 for negative amount

    Hi,
    our customer wants to generate a payment form also when the account balance of the customer is negative.
    however, I'm getting an error message that:
    Creation of payment form not possible, amount is negative
    Message no. >6397
    Thanks,
    Vered

    Hi Vered,
    If I'm not mistaken (and I don't think I am ), that message comes from Function module FKK_SAMPLE_0756 - "FI-CA Correspondence - Sample Module for Payment Form Request".
    To override this bit of SAP standard logic, to the very least you'd have to program and assign in FQEVENTS own function module (without the check on negative Amount) to FI-CA Event 0756. We don't have payment forms for negative amounts in our system, but I believe it's doable - the rest of standard logic should function OK with negative payment amount.
    cheers,
    Janis

  • Qualifier for Tax amount in E1EDK04

    Hi,
    I want the qualifier for Tax amount in E1EDK04 segement in INVOIC idoc.
    Thanks
    Mohan

    Use any of the methods in (Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i) to get the correct field/table name.Thanks Hussein
    Before this I tried with all other options except the one using trace file. This has solved my problem. :)

  • Table & Fields for Collection Amount

    Hi,
    I want to create an ABAP report for invoice Vs. Collection. But getting stuck in 1 scenario.
    Case: I have raised 2 invoices for a same client.
       Inv No.        Date.          Amount  
    10000001    23.03.2009     100.00
    10000011    15.04.2009     300.00
    But I got a single collection cheque of Rs. 400/-
    So I need to clear the 2 invoices against the collected cheque & pass a single entry in F-28.
    After that my report show the values as
       Inv No.        Date.          Amount    Chq No.     Chq Date.       Chq Amt.     Outstanding.
    10000001    23.03.2009     100.00      1021        25.04.2009        400.00         -300.00
    10000011    15.04.2009     300.00      1021        25.04.2009        400.00         -300.00
    Which shows all total a wrong information.
    For collection amount I am choosing BSAD Table with WRBTR Field.
    Please suggest how to resolve this issue, where can I find the field in which table, which can tell me the bifurcation of collection.
    Thanks,
    Bidhu

    Collect all amounts from document type for collections, then collect all amounts from invoice document type. then you will be able to compare both amount.
    The invoice amount should be sellected from both BSAD and BSID while the amount for collection should be selected in table BSAD.
    Hope this help.

  • Time reduction  for  getting materials as per plants, login from R/3

    Hi All,
    I am technical person working on SRM . Our SRM configuration uses the ITS for the end user to login to SRM server.
    The requirement is that, the user logged into the SRM must see the material for the plants which they are assigned in org. structure(through  search help) while creating the shopping cart. 
    Since I was unable to find any link between the Plants and material in the SRM server, I used the RFC fucntions to do the same i.e i tried getting the materials from the backend.
    But the time taken to achieve the objective is more due to the amount of the materials .
    Could you please suggest any means by which I can avoid going to backend sytem and achieve the same in the SRM system?
    Regards
    Sachin

    Hi Yann,
    Thanks for the pointers to the discussion. They did provide certain insights to as,  what can be the possible alternatives.
    I am interested in knowing or want a final word or confirmation,  whether I can by any means use the SRM server only for getting the materials based on user and hence plant, without querying the backend.
    From what I have seen  in dicussion , I think that only resort is to get to the backend to do the same, whether I develop RFC enabled Function module in backend or use the BAPI_GET_LIST or the META_* function
    Regards Sachin

  • How to get amount : Condition record

    Hi all ,
      I need to print amount for a particular condition type.
    I am getting condition value in KOMP-KZWI1 , but not amount .
    Please let me know how to get amount.
    Regards
    Taranam

    Hi all thanks for your replies.
    But I am not able to find amount which I am seeing in condition tab through all solutions mentioned by you all.
    In VA13, IN conditions tab ,
    I have Condition Type, Name ,Amount , Condition value and so on.
    I am getting Condition value in KOMP structure.
    Any table in which this amount gets stored?
    I have already checked KONV .

  • Required Table for Available Amount Budget

    Hi Experts ,
    Could you please any body help me out for Available Amount Budget  Table (Combination of Fundcenter/Commitment Item/etc)
    Regards
    Srinivas
    9603351848

    Hi, Samar
    for getting TDS the required table is WITH_ITEM where you will find the data related to TDS deduction. On the basis of Customers & Vendors.
    Regards
    Surender Bhomia

  • Pop up required at time of delivery for advance amount in customer ledger.

    Hi,
    My client has requirement that whenever he goes on delivery screen for creating delivery, he needs a pop up on the screen that how much amount is lying as advance in that customer ledger.
    So please let me know if there is any standard setting or we need to do some customizing through ABAP.
    Please help
    Edited by: Deepak Agrawal on Jan 7, 2012 1:20 PM

    Hi Deepak,
    As specified above, you can acheive this by a small ABAP development using the below creterion.
    Table: BSID
    Amount: Sum of amounts of all the line items of questioned customer, where spl gl indicator field is equal to A. Ex: Pass BUKRS, KUNNR, and UMSKZ to table BSID and get amounts of all suitable line items and sum it and show in your pop up. (during delivery transaction)
    Note: Assuming spl gl indicator A is being used for customer advances also
    Above information may helpful for you.
    Regards,
    Srinivas

Maybe you are looking for