Spell check problem with windows version

Hi to everyone
I have a problem with Safari 5.1.1 (windows version) and the spell check, I change the language in the Spell Check dialog and it check the italian language.
When I close and open safari the spell check language is again in English
This happens with all four my PC's (2 with Windows 7, 1 with XP PRO SP3 and 1 with Vista)
There is a solution ?
Many thanks !

Same problem also with 5.1.2 version !
Switched to Google Chrome

Similar Messages

Fafter upgrading to mavericks,I had problems with windows 8.1, so deleated partion to start over. Everthing went fine until The fact I was using an upgrade disc instead of a bootable version. Now everthing is loocked up and none of the hotkeys work

after upgrading to mavericks, I had problems with windows 8.1. I deleated the partition to start over. Upon try ing to reinstall 8.1 everthing locked up. I had an upgrade disk instead of bootable. Now every time I turn the computer on "it asks for bootable media"; none of the hot keys work to get back eo mac os

You mised the last part where none of the hotkeys are working,neither options nor "X" it goes ms 8.1 boot up and asks foe a bootable disc. I am about to pull the HD put it into a case attach it to another computer and delete the file

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Photo sync problem with Windows Vista?

I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
Thanks,
Dean.

I checked out the article and not much help, thanks anyway.
Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
Thanks.

Problems with Windows 7 home premium and ovi

Excuse me for my english.
I've a big problem with Windows 7 and NOKIA N97 32G
I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
I can't synchronize the phone.
Help me.
Thanks

I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
Finally I found the solution:
I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
(You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
PS. My version of Ovi Suite is 3.0.0.290

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Backup Problem with Windows Server Backup

Hello,
we have problems with Windows Server Backup Feature.
Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
Since several days no backup can be carried out. We get the error message:
- Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
- Errors in the event log: For the started backup an error occured. The volume shadow copy operation was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
What else can we do respectively where could be the problem?
Kind regards
Sven Otto
KRK ComputerSysteme GmbH (Germany)

Hi Sven,
Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
For more detailed information, please refer to the article below:
Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
http://kb.backupassist.com/articles.php?aid=2995
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT1926 (iTunes) Problem with Windows installer package?

(iTunes) Problem with Windows installer package? I try to install the new version of iTunes but get an error "Problem with Windows installer package. A Program required for this install could not be run." Can anyone help shed some light for me as to how to correct this? I have tried to install the program through Chrome, Explorer and FireFox but have had no success. I have included a screenshot of the error. Hopefully it's visable. Thank you for any help.

Found answer for anyone else curious. I love the apple community. Thanks guys for help!
https://discussions.apple.com/docs/DOC-3551

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Problems with latest version of Muse

I'd like to report some problems with latest version of Muse. Its actually all related with scroll effect.
1. In previous version I had a group of rectangles and when I added to them motion (initial motion: 0 everywhere, final motion: 0 everywhere) they where sliding nicely down during scrolling my page, and it happened only in y line (horizontally). Now its moving also on the right and left, when I am changing size of window. Other thing is that in firefox this group of rectangles is pinned to bottom of window.
2. I have footer that I want to be always pinned to the bottom of window. The footer is a group of objects: rectangle + one png file with hyperlink, and one text with hyperlink - and of course it worked perfectly in previous version, but now finally when I export the page I have only the rectangle without hyperlink on the bottom of the page and the rest is missing.
I hope I explained it clearly? I did my best :-)

I have a same problem like no.2.
Finally, I fixed it.
First, You have to ungroup the footer objecs.
Second, Group again that.
Then export your site.
Please try this!
I hope this will be of some help.

Problem with windows installer

problem with windows installer. cannot download 10.5

It is from trying to use 64-bit versions on Macs that have old out of date EFI32 and don't support Windows 64-bit.
Select CD-ROM Boot Type Error...: Apple Support Communities
CD-ROM Boot Type when installing
Vista 64-bit Macbook 2008
You have to either use 32-bit version or modify the DVD which means making a new ISO and reburning with changes, usually using Windows in a VM.

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Spell check problem with windows version

Similar Messages

Maybe you are looking for