Spellcheck is definitely not working!

I only make small mistakes, e.g., an extra "r" or other character, etc. Transparent mistakes that spellcheck had usually picked up prior to Snow Leopard. This has Not worked at all since installation. It is checked in preferences and I do get the red underline with erroneous spelling?

I had tried this earlier too. Take a word like "misspell" misspelt as "mispell". There is a red-underline under "mispell". When I control click the misspelt word it shows a grayed out "no guesses found" in the window that pops out under the word. The menu further states: the word was not found in the spelling dictionary. This happens with words misspelt like "yess", "pleasee", "hellp", etc. These are not complicated errors. I've never been in love with the system spellcheck but it had- prior to upgrading to SL- usually worked with simple mistakes. And yes this applies to Safari too. Thankss (Oops) d

Similar Messages

  • Characteristic "Master Data" setting in Query definition not working?

    Hi,
    I am having a problem with a query definition. (BI 7.0)
    The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
    Filter
    Project Definition = Fixed Single Project Definition
    Fiscal Year Variant = K4
    Project Profit Centre = Hierarchy Node
    Project Plant = Fixed Single Value
    Free Chars
    Network
    Network Activity
    Activity Element
    Rows
    Project Plant
    Project Profit Centre (With hierarchy)
    Project Definition
    Milestone Type  (Setting in characteristic to pick up Master Data)
    CSR Relevant    (Setting in characteristic to pick up Master Data)
          Structure
               Actual
               Scheduled
        (Actual:  Value type = Actual,  Origin = Manual ,Event = Start)
        (Scheduled:  Value type = Actual,  Origin = Scheduled ,Event = Start)
    Columns
    Key Figure structure of 12 key figures in a time series
    Selection
    Key Figure = Date
    Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
    FYI
    When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
    I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
    I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
    I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
    Thanks in advance..
    Stevo

    Hello there,
    Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
    It is stucked while executing the query isn't it so?
    That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
    Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
    If it is being stucked in query execution whike milestone is in the rows. Try this for example:
    Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
    Diogo.

  • Does Photoshop 7 DEFINITELY not work?

    I've ordered Leopard only so that my new iPod Touch will work (currently have Panther on my 1.25GHz G4).
    But if Photoshop 7 (and presumably also Illustrator and InDesign of the same vintage) definitely won't work at all, as looks likely, then I'm inclined to not bother installing it because upgrading to a new Creative Suite is a whole different ball game in terms of cost.
    Question is, can I now get hold of a copy of Tiger? Wish I'd upgraded to Tiger at the time now.

    >does it not work on vista at all??   i can tbelieve that
    Why not? Vista is a MAJOR change from what was used when P7 was written
    Both Microsoft AND Apple (ala Snow Leopard OS) are known to break things with each new version of their operating system software
    Even within Microsoft, the Office 97 I use with WinXP does not work with Vista or Windows 7
    When I build a 64bit computer next year and start using Win7 64bit, I will have to buy a new MS Office and all new Adobe CS5 software

  • Site Definition not working

    I am trying to define my ftp info in CS5 and it is not working. The 4 options on the left side when you try to define a site (site, servers, version control, and advanced settings) are all not available to click on. Can someone please tell me what to do in order to fix this?

    That is the point. The options show up there, but I can not click on them. It is almost as if they are no
    t links. I talked to support and they
    could not tell me anything other then to redownload, which I have not done yet. I downloaded from adobe the first time.

  • "Edit Task Definition" not working in JDeveloper for Order Booking tutorial

    Hi,
    When I click 'Edit Task Definition' in JDeveloper in the BPEL Process Designer, nothing happens. It should display the task definition...
    What am I doing wrong?

    I figured out the issue with my installation of the SOA demo. I had originally unzipped the demo to a folder in the 'My Documents' directory and had been accessing the files for the demo directly from this location. After I copied the SOADEMO files to the standard location for my other jdeveloper applications (C:\jdeveloper\jdev\mywork) it worked fine.
    I think this is related to the standard warnings included in the installation of jdeveloper regarding not having spaces in any of the folder names under which jdeveloper is installed.
    Best of luck. Hope this helps.

  • Site Definitions not working in CC 2014

    Since the update, my site definitions are no longer working. I try to set up a new site, navigate to the correct folder and get the warning: 'site is inside the site "x"' This may cause conflicts … ' etc. The site folder isn't inside another site at all. I've even tried trashing the 'x' site folder, and Dreamweaver just throws up the same warning with the next alphabetically listed folder. Then I tried removing all the site definitions and setting up a new one, but I get the same problem. Is anyone else suffering?

    In order to preview .php pages locally, you need a local testing server (Wamp, Xampp, Mamp).  Is yours properly defined in DW CC?  See screenshots.
    Nancy O.

  • Quicktime definitely not working right in different browsers

    So I just made and published my site with iweb. I've uploaded it to my own server and everything loads up a look pretty good. However, the quicktime movies on my site are doing strange things.
    In safari, when I go to a page that I have a quicktime movie on, I can't play it. I try to click the play button, and it won't work. But, if I right click it, it starts to play. In firefox for OSX, I can't click it at all, won't work. On a pc, firefox works perfect. All the movies play with no problem and everything looks great. In internet explorer on a pc, the site loads weird. There are white boxes everywhere, and when the pages finish loading, they are gone. It is especially annoying on the pages I have quicktime movies in, because the white boxes don't go away until the movie is done loading.
    So far I have read quite a few posts that talk about "making quicktime autoplay". I have tried the technique of changing the autoplay function from "false" to "true, however when I open the specific .html file in text editor, or any html editor for that matter, the line of code containing the quicktime information is nowhere to be found. I know the page has a movie on it, but it's not in the code. Which leads me to believe it's got something to do with .mac vs. a personal server. I don't know.
    Any help on any of these things would be great appreciated.
    my site is: http://www.nealham.com
    Thanks!

    I'm sure the problem isn't what's actually there in iWeb, but what's getting created as a result. On your demo reel page, start selecting at the "all" in "all rights reserved" and drag the cursor to the middle of the video. You'll see your control bar becomes obscured. Compare that to one of my video pages
    http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Blog/E275A42E-C27D-4634-BB8 6-B8218F9A175C.html
    and you'll notice that it's difficult to find a click and drag that will highlight my control bar (if you start between the m and the e it's a little easier, but not every time).
    The reason why I mentioned taking it apart and putting it back together again piece by piece is because then that would at least give you and idea about at what point it becomes unplayable so that when it happens in the future, you'd be able to easily defeat it. For example, if you removed everything and it still doesn't work, then you'd know you've got a really REALLY strange problem on your hands.
    You could try using the forward button to move your QuickTime movie to the fore to see if that solves it, but I just checked mine and it's not the frontmost item (it's one layer down).

  • Photoshop Pattern Definition not working correctly

    I work as a graphic designer at a company working with CS6. I try to define a pattern but when the dialogue box pops up in define pattern the pattern does not define as I want it to. Instead of defining it as it looks in the image. The pop up turns it into something else. I've taking a screen capture of the problem and inserted it below.
    What do I do to fix this issue?

    There was a similar problem reported five months ago:
    http://feedback.photoshop.com/photoshop_family/topics/incorrect_cropping_of_define_pattern _in_32_bit_mode_in_some_cases
    Adobe completely ignored the report. Not even an acknowledgement. That's what we get for $1000, I guess.
    Try creating your pattern in 8-bit RGB mode. It'll still be usable in other modes.

  • Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

    Hi All,
    Normally very quick to do so, I’ve been hesitant to upgrade to Mavericks based on so many issues being reported with Mail + Gmail. 
    Previously Apple released a fix for these issues and I still waited a while.  This weekend I upgraded to Mavericks and Mail is definitely not working as I’d expect it. 
    Some of the things I notice include:
    1) My saved mail folders, previously in alphabetical order, are now in reverse alphabetical order and dragging them to be in a different order has no effect
    2) Previously when I clicked on a message and pressed Message > Remove Attachments the message would reappear in my inbox within a second or two, without the attachment.  Now, the message simply disappears.
    3) The little red icon no longer appears in the dock when a new message arrives
    4) For my various accounts, signatures do not appear/disappear as I select a different From account (each of my accounts has different signatures).
    Does anyone have thoughts on any of these items?
    Thanks,

    Not an answer, but a repeat ...
    I too have problem (2) -- Remove Attachment now makes the email in question disappear (in fact moving it to Archive).
    Help would be appreciated.
    (Have just moved from Lion to Mavericks.)

  • Document Server not working properly on Vista and website

    I just got a new PC with Vista Home premium edition and Document server is definitely not working the same as it did on my XP. I know it's an old program so I guess it's finally be time to buy the new stuff but why won't it work on the website I utilized it with? I'm using it with a basic html website that contains no flash (some rollovers though) and it still doensn't transfer over properly. You can even see it if you go to the third tab on the home page http://www.creditcardforum.com to see what I mean. Is it finally just time to let go of this product and upgrade? Has anyone used it successfully with with Vista?

    I mad the biggest mistake when I bought all new Windows Vista Pc's. They dont work very well with many products. I tried to format and install a Vista PC and put Windows XP Pro on it but I had so many troubles since I need every new driver in the world. I now just use Adobe Document Server on my Laptop that has XP Pro on it. Works great on there.
    Regards,
    Agyemang Fellowes
    Director of Operations
    OPTiC BURST COMMUNICATIONS
    Office: 1 (209) 885-4211
    http://www.opticburst.net/
    http://www.iphone-sim-unlock.com/

  • Apple List Servers Not Working

    The Apple list servers seem to be not working. Can someone at Apple please give update as to whether this is being resolved?
    For example:
    http://lists.apple.com/archives/webobjects-dev is definitely not working.
    Also cocoa-dev list seems to have no archives since the turn of the year.
    5 days later and the lists are still down. Anyone got any idea what is going on?
    -Kieran

    That link worked for me...
    maybe a DNS issue somewhere, perhaps your ISP or LAN?
    Jeff

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

  • SCEP definition updates for clients in DMZ via UNC is not working.

    Hello,
    I have configured SCEP definition updates via UNC method for my Win 8.1 clients in DMZ and its not working.
    Script is properly associated with task scheduler and downloading definition to shared folder properly.
    Even running the mpcmdrun.exe -SignatureUpdate, gives the below error:
    C:\Program Files\Microsoft Security Client>mpcmdrun.exe -SignatureUpdate
    Signature update started . . .
    ERROR: Signature Update failed with hr=80070002
    CmdTool: Failed with hr = 0x80070002. 
    MpCmdRun: Command Line: mpcmdrun.exe  -SignatureUpdate
     Start Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:09
    Start: MpSignatureUpdate()
    Update started 
    Search Started (UNC share) (Path: \\sccm\SCEP_UNC_DEFS\Updates\x64)...
    Search Completed 
    Download Started...
    Download Completed 
    Installation Started...
    Installation Completed 
    Update completed with hr: 0x80070002
    ERROR: Signature Update failed with hr=80070002
    MpCmdRun: End Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:17

    Hi,
    Please check logs on the client to see whether there are any helpful information.(ScanAgent.log, Windowsupdate.log and UpdatesHandler.log)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Importing element definition from an  EDD into a template - does not work

    FM 10.0.1 German on Windows XP SP3.
    When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a  new EDD.
    So the element definitions which are correctly defined do not appear in the template.
    The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
    In FM9 this was no issue.
    Any help is appreciated, I have a deadline and must do some changes in the EDD.
    Best Regards
    Thomas

    Lynne,
    EDD is english (Version FM7.0), Interface language is German.
    Maybe it´s a localization issue.
    I have attached a captivate demo pdf so you can see what happens and the
    defective EDD.
    Mit freundlichen Grüßen
    Best Regards
    Thomas Zeisig
    From:   Lynne Price <[email protected]>
    To:     "Th. Zeisig" <[email protected]>
    Date:   13.10.2011 14:12
    Subject:        Importing element definition from
    an  EDD into a template - does not work
    Re: Importing element definition from an EDD into a template - does not
    work
    created by Lynne Price in FrameMaker Structured - View the full discussion
    Thomas,
      No question the behavior you describe is a bug. However, I am unable to
    duplicate it. I created an EDD with two element definitions:
    Element (Container): doc
      Valid as the highest-level element.
      General rule:  (
      When I imported element definitions from this EDD into a new portrait
    document, FM reports that element a is referenced but not defined and that
    b is defined but not referenced. However, with all elements listed, the
    element catalog shows a, b, and doc. The metatemplate elements are not
    available.
      I wonder if this is a language-dependent problem. Is your EDD German or
    English? What about your user interface?
      Can you send me a short EDD that fails as you've described?
      Thanks,
          --Lynne
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3969067#3969067]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in FrameMaker Structured by email or at Adobe
    Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • After restoring definitions iphone 3gs does not works, after restoring definitions iphone 3gs does not works

    after restoring definitions iphone 3gs does not works

    What do you mean by "restoring definitions"?
    What EXACTLY is your problem?
    "does not works" is just a bit vague.

Maybe you are looking for

  • How can I monitor activity on a IX2?

    I have 3 remote offices that use FTP to backup to our IX2 at the main office. When I come to work the lights on the IX2 are flashing very rapidly indicating activity. My first thought was that the backup jobs are still running. However, I logged into

  • Iphone in recovery mode, and it disconnects every time I try to restore. HELP!!

    I tried to update my Iphone with the latest software update, but it crashed during the update and was stuck for hours without getting any further along in the process, so i disconected it. My phone is now in recovery mode. When i tried to restore it

  • Can links inside "set text of container" behaviours open in a new page?

    I am using the set text of container behaviour to show different information within the same page, to keep things neat and simple to navigate. Some of the text needs to be external links, but they open in the current page, not a new page even though

  • !Charging is not supported with this device! When using original charger.

    My iPhone4 suddenly won't take a charge. Because I carry it in my pocket, I suspected there was a lack of conductivity. I used air to clean the slot and a small plastic pick. Some dust bunnies came out of the slot and I plugged it in to charge. I got

  • Invisible Fonts in Flash on Webpages

    Ever since upgrading to Snow Leopard, I've been having problems with invisible fonts in Safari on pages that use Flash Player. Here's what I know: They're always in flash, but not all fonts are invisible. I created a new user account and there's no p