Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the  pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

Similar Messages

  • Mac Mini Wake for Network Access Not working after upgrade

    After upgrading to the latest OS (10.8) the WOL fuction is not work.  This used to work before the release.  i could see the Mac mini on my mac book pro even when it was asleep.  Once I click on it under the shared resources area I could see the Mac wake up.  Now as soon as it goes to sleep it drops from my mac book pro.  I am connected via WIFI but also tried via LAN.  Same result. Any ideas?  Seems to be a bug as I google this issue it appears to be impacting many people.

    Same issue here after updating my iMac to OS X 10.8. I can't use Logmein, wireless syncing to iTunes from my iOS devices, or my Logitech Server software for my Logitech Radio. Once the computer goes to sleep, it is invisible to the rest of the network. This all worked fine on 10.4-10.7. I have double-checked that Wake on Network Activity is turned on. I have disabled all networking interfaces except Ethernet. Nothing seems to help.

  • 3 DVI monitor not working after upgrade

    I have three monitors connected to my new Mac pro via Active Minidisplay port to DVI adapters. They are all Dell 24" (1 2407,and 2 2405) they worked fine on 10.9.2 but after the upgrade to 10.9.3 only two monitors will work now. Verfiied that I was following Apple's document on connecting the three monitors.  If I Disconnect one of the two working monitor the previous blank one would automatically go active. 

    This issue is caused by a bug in OS X 10.9.3. The following steps have been reported to resolve it in some cases (not all.) If none of them works for you, the only other option is to revert to 10.9.2, which can be done by restoring a pre-update backup. You may prefer to wait for Apple to release another update, but I don't know when that will happen.
    1. Reset the System Management Controller.
    2. Reset the PRAM.
    3. Install the Combo updater.

  • Nmcli (Network manager) not working after upgrade

    It seems there is a bug in the command line tool "nmcli" after a recent upgrade ..
    The GUI applet still works, but I can no longer start/stop connections with nmcli ..
    The error when using nmcli con ... is:
    Stopping Mobile Broadband Connection.
    Error: Can't obtain connections: settings service is not running.
    I had a script using nmcli to start stop my 3G connection .. it no longer works.
    If I downgrade networkmanager network-manager-applet and any dependancies, I don't get the error above, but I still can't stop/start the interface
    Anyone have a solution?
    EDIT: Looks like I have struck the bug reported here: https://bbs.archlinux.org/viewtopic.php?id=141379
    Last edited by bmentink (2012-06-11 04:47:40)

    Did you resolve this? I've just been hit with the same after upgrading to Server 3.2.2.

  • Help! Safari not working after upgrade to version 2.0

    After i have upgraded to version 2.0, dispite all the problems i have read it has worked fine for 24hrs, but all of a sudden the wifi link has stopped.
    If i try using it the message reads " Safari can't open the page because it is not connected to the internet"
    Why! I haven touched a thing it just stopped mid browse
    Any help?

    Are you noticing that all other applications that use the Internet doing the same thing? i.e. email, weather, stocks, etc. They all time out.
    Same symptom: Looks like Apple broke wifi in 2.0

  • External Monitor Not Working After Upgrade

    Hello friends.
    I upgraded computer and software (Production Premium CS5.5). I use an external deck that is connected through Firewire. Premiere Pro sees the deck but does not output the image/video to it. I even managed to capture from the deck into Premiere without a problem. No matter what I've tried Premiere won't export to the NTSC monitor. It did in Production Studio Premium. With the Premiere software I had before it would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for color calibration. Any help would be greatly appreciated.
    CS5.5 Production Premium
    Dual  DVI monitors
    Quadro 2000 video card
    Windows pro 7 - 64bit
    i7 with 16 gigs ram

    >reply below
    If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
    Post the link to the message... this message is http://forums.adobe.com/thread/960405

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • Personal hotspot not working after upgrading to ios7

    Personal hotspot not working after upgrading to ios7

    I was having this problem (iphone 5 wouldn't work as hotspot for my PC laptop) and had tried everything suggested on these message boards, so I finally went to the Apple Genius Bar and they fixed it for me.  Here's what they did:
    1) Turned the Hotspot off on my iphone
    2) Went to the Control Panel on my laptop to "Network and Internet" > "Network and Sharing Center" > "Manage Wireless Networks" (on the left navigation panel) and deleted my iphone from the list of WiFi connections I've attempted.
    3) Flipped the manual WiFi switch on my laptop to Off and then back On again (to reset it)
    4) Turned the Hotspot on my iphone back on
    After that, when I tried to connect, it worked.  Hope this works for someone else.

  • Wi-Fi not working after upgrading to 3.0

    Has anyone experienced their Wi-Fi not working after upgrading to 3.0? It has happened to me on my home network. I know the internet connection is good because I can successfully connect via my Mac. When I turn off the Wi-Fi and use AT&T, I can connect to the internet. I go back to Wi-Fi and no connection.
    Any suggestions would be appreciated.

    Hi There,
    Yep I can confirm that I am having problems with wifi as well.
    My problem is that it is not re-joining known networks.
    Also the auto login feature designed for hotspots does not seem to work well either. The Log In Screen slides up then an error keeps repeating on the page...."Error Opening Page - The page could not be opened because an error occurred"

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

Maybe you are looking for