Spilled coffee on my magic mouse. Now it won't scroll at all. Do I need to buy a new one?

Spilled coffee on my magic mouse. Now it won't scroll at all. Do I need to buy a new one?

If your coffee had cream and/or sugar in it, after removing the batteries it would not hurt to slosh it a bit in warm (not hot) sterile water to rinse out the residues of the cream and/or sugar. Then let it dry thoroughly - might take a couple of days, even with a fan blowing on it. Do not use supplemental heat, such as a hair dryer or even direct sunlight, to speed up the drying - things with plastic parts can be damaged by excessive heat.
You can get sterile water at most grocery stores - the stuff for steam irons is perfect. Sterile water does not contain the usual lime and/or calcium that can deposit out when the water evaporates.

Similar Messages

  • If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

    If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

    Lion will run on most Intel machines. It will not run on the following machines:
    MacBook Pro (sold before October 2006)
    MacBook (sold before November 2006)
    Mac Mini (sold before August 2007)
    iMac (sold before September 2006)
    It requires an Intel Core 2 Duo (or later CPU). Those machines listed above were all Intel Core Duo machines and with the exception of one of the Mac Minis, an Intel Core Solo. So we're talking 4+ year old machines. I have not tested Lion on a machine with anything less than 2GB of RAM.
    Wikipedia has a pretty good public summation of what's known so far and it's quite accurate - http://en.wikipedia.org/wiki/Mac_OS_X_Lion
    The biggest thing of note so far is that you cannot install/run Rosetta. Which maybe problematic for some users.

  • Battery on brand new iPod touch drains when synced to a mac and now it won't charge. If you're thinking of buying a new iPod touch, don't bother. The batteries don't work.

    The battery on my son's brand new 64G iPod touch drained while it was synced yo the mac. Now it says 100% charged when it's connected to a charger, but drops to zero as soon as it's disconnected. It would appear that, either the battery is faulty or the battery indicator is faulty. iPod batteries are not supposed to drain while syncing. And rechargeable batteries are supposed to recharge after they have drained. Maybe I'm missing something simple here, does anyone know what it is?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Im unable to open my wireless mouse back to change the batteries. The little black button seems to be stuck - I've tried to pry it open using 2 small screwdrivers but to no avail. Will I need to buy a new mouse?ve tried to pry it ope

    I am unable to open the back of my wirelss mouse to change the batteries which I've changed several times before. The black release button on the back does not seem to work. I've tried using a couple of small screwdrivers to pry it open but I don't want to break the plastic and therefore the mouse. Anyone have any other ideas or do I need to buy a new mouse?

    You may have caused more damage with the screwdrivers.  It can be tricky as it works the opposite way to what you may first imagine.    Hold the mouse, bottom upwards, the black catch nearest to you.   Then flick the black catch towards you with your nail.   (Not away from you towards where a space is showing).

  • I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

    I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • Does the magic mouse not have the feature of viewing all open pages on desktop like you do when you use the side buttons of the wired mouse?

    Does the magic mouse not have the feature of viewing all open pages on the desktop like you do when you use the side buttons of the wired mouse?

    No, you'll have to use Mission control for that.  It's either located on the dock, the F3 key on recent laptops on a swipe on the trackpad.
    Regards,
    Captfred

  • Good day, tell me what to do iphone 4s bought preowned raised to 7.2 firmware but it requires aktivatsyi apple id but I do not know it because they do not buy a new one. and contact the seller lost in what to do now tell me?

    Good day, tell me what to do iphone 4s bought preowned raised to 7.2 firmware but it requires aktivatsyi apple id but I do not know it because they do not buy a new one. and contact the seller lost in what to do now tell me?

    There is no way around the activation lock. You apparently decided to use the phone with someone else's ID set up for an iCloud (and find my iPhone) account before updating. Since Find My iPhone was active, updating to iOS 7 has automatically turned on the activation lock. If you do not have the Apple ID and password that were previously used, then the phone is now useless. You can't activate it without that informaion.
    Talk to whoever you bought the phone from if you can. If you can't, buy a new phone.

  • I just updated my intunes, but now itunes won't open at all? help!

    i just updated my intunes, but now itunes won't open at all? help? it says itunes was not installed correctly, so i've reinstalled about a billion times and it still doesn't work

    Can you open it from the Applications folder?

  • After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    Did you actually download the installer from Apple or did you use Software Update.  You can download the installer http://www.apple.com/itunes/download/
    Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time.  And of course make a backup of your whole library first.  It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates.  Better safe...

  • I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

    I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

    Hi Craig
    Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
    You could try restoring from a backup, and choosing an older backup perhaps
    Cheers

  • I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

    I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

    If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
    Or take it to a genius bar if you have one near?
    Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

  • I killed a MacBook Pro. Shutdown with flash in drive and now it won't start at all.

    I may have killed my MacBook Pro OS X by accidentally restarting  with  a Flash Drive it it and now it won't start at all.  Any ideas?

    So it is powering on. You did not state that before. In that case:
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see this if above doesn't work:
    Install OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the original version of OS X that came on the machine.

  • ITunes kept freezing and now it won't start at all

    It all started when I downloaded an iTune U class that contained a lot of videos and chose to download all old episodes. It turned out there so many that it would take 25 hours. I tried to abort the downloads, but apparently that messed something up. 
    First iTunes started up normally, tried to download "83 items" and then started to freeze up after a minute. I had to shut it down via the Task Manager.
    Then it got worse, and now it won't start at all. After I click on the icon to open iTunes (I have Windows 8) the screen turns white, the blue wheel spins and nothing happens. When I hold the cursor over the iTunes icon in the task bar I can see two preview tiles (one for Download and one for iTunes itself), but both are blank (all white) and nothing happens - the blue wheel will spin forever. What do I do?
    I do have the latest version of iTunes. If I uninstall and reinstall iTunes, will that solve the problem? And will the content of my library still be there?  Thanks!

    Hello, J Appleseed. 
    Thank you for visiting Apple Support Communities. 
    You can try an uninstall and reinstall of iTunes to see if that resolves the issue.  Your iTunes library will not be deleted by doing this.  However, this issue could be a result of multiple issues so an uninstall/reinstall may not resolve this.  Below, I have included the best articles that will help you isolate and possibly correct this issue.  Process each step and test the results after each step processed. 
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/ts3125
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Cheers,
    Jason H. 

  • Just updated itunes 10.5 and now it won't open at all please help me

    Just updated itunes 10.5 and now it won't open at all please help me

    Already a thread about this problem. Check to see if any of the given solutons here work for you.
    https://discussions.apple.com/thread/3381033?start=0&tstart=0

  • My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • I can't open a flash animation made in Flash CS6 in CS5

    I created a Flash Animation for a school project in Adobe Flash CS6 at home, and at school which uses Adobe Flash CS5, I can't open the flash file.  Is there anyway I can make this happen, because until then I can't work on my project.

  • Aluminum iMacs RAM question

    Hello all! I currently have a Core Duo iMac, one the first Intel ones. My RAM is 667 MHz, I have 2 GB installed. I am using my iMac for working with large sound and image files, so memory and CPU speed are important to me. I would like to get a 20" i

  • Change the material no. of an equipment

    Hi Experts,    I have used BAPI_EQUI_CHANGE and BAPI_TRANSACTION_COMMIT to change the material no. of an equipment, but it is not getting updated.  can you pls provide the exact parameters to be passed to the BAPI for the purpose OR else pls suggest

  • What is the difference between ALV list FM display and OO ALV Display?

    What is the difference between ALV Function Modules and Object Oriented ALV Display?

  • Do two libraries double the number of photos?

    If you have two libraries with each having some photos that are the same, have the number of photos doubled for the ones that are the same on the hard drive?  As I created each library and imported photos into each, a few photos were the same in each