Spilled liquid on MacBook Pro - won't start - any suggestions?

spilled liquid on MacBook Pro - won't start - any suggestions?

Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.

Similar Messages

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

  • Hi! My MacBook Pro won't start! HELP !!!

    Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
    I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
    Has anyone had this same problem? 
    All I get is white screen + grey Apple and spinning grey disk...  it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
    This MBP is from 2011, runs on OS X 10.6.8
    I tried booting with OS X Snow Leopard CD, it didn't work!  (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
    I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
    When i run coomand on root# fsck -fy  --> RESULT = my HD was checked and seems to be FINE!
    Thanks

    Please make a Genius Appointment and take it in for service.

  • MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    Try resetting the SMC.
    Barry

  • MacBook Pro won't start after changing access rights

    I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none.
    Result, my MacBook Pro won't start anymore.
    Already tried the installation disk, reset password for root and users. No result.
    Help program "check acces rigths". Didn't work either.
    How do I reset the access rights of Macintosh HD?

    https://discussions.apple.com/docs/DOC-2240
    The first solution is what you're looking for.

  • Macbook Pro won't start properly... keeps restarting without chime!

    Macbook Pro won't start properly... keeps restarting without chime!
    Late 2007 Macbook pro.  OS upgrade worked great for me.
    I have had this problem on and off for a month or so.  I simply cannot figure out what the issue is.  I have tried poerup with and without AC power and with/without battery installed.
    Starting in Safe mode does not help.
    Trying to start with a disk does not help.
    It sort of seems like it might be an internal power issue or GPU issue.
    It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
    I have three different anti-virus programs so I doubt it is a virus issue.
    I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion.  Fusion seemed to just bog down the computer horribly but did not cause a system crash.
    I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
    Anyone who has had this problem and resolved it please let me know 
    God bless 

    Systematically run through this list of fixes.
    ..Step by Step to fix your Mac
    If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software.

  • I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

    I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Hold shift key down while booting should get you in
    go through this list and get back with me
    Step by Step to fix your Mac

  • MacBook Pro won't start at all - clicking noise with black screen

    Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

    You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
    It's  ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
    Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • My 2009 2.26Ghz MacBook Pro won't start up

    My 2009 2.26Ghz MacBook Pro won't start up. I know it's not the HDD because I replaced it with the old one I had in it and it did the same thing. I also know it isn't the HDD because I can boot of of it when I attatch it via an external HDD enclosure. It sometimes turns on if I let it sit for 30 minutes and if it does turn on it works perfectly and has no symptoms until I close it then it freezes up when I wake it up and I have to hard restart it but it doesn't restart then. It seems to do this more so if I close it then move it (put it in my bag and go to school). It's getting me really upset cause if it's my motherboard it's $600 to replace (almost not worth replacing except I don't have $1400 for a new MBP) please give any advice. I thought about buying the data doubler by OWC but that would be a last resort. I upgraded the ram to 8gb, 1333mhz (I know it uses 1066Mhz but I couldn't find any where I live so I put in 1333mhz ram expecting it to underclock to 1066 which it seems to have done that with no issue to my knowledge just thought I'd add that in case though.

    Sluggish could be due to not enough ram for what you want to do.
    Keep working with it, you may need to put more ram in, but go for the stuff that meets the specs.
    A much liked source on here is OWC, http:www.macsales.com you only have to look up your machine to get exactly the right stuff.
    Get back with how it is working, would like to hear more.

  • Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

    Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

    Here's a link to a Support page on the topic, which may be of help in finding resolution:
    •A flashing question mark or globe appears when you start your Mac
    There are a few known causes of this symptom, so you'd have to try some things to
    see if you can narrow down the cause; this often accomplished by finding success.
    Hopefully the info there helps.
    Good luck & happy computing!

  • 17" Macbook Pro won't start at all.  I shut it down last night at 80% and now there is only black screen, no light, no sound.  What to do?

    My 17" Macbook Pro won't start at all.  I shut it down last night at 80% and today I get only a black screen with no sound, no light, nothing.  The power cord light does show orange when plugged in.  I don't know exactly which OS it is. It's model # A1286. I've tried all the tips about holding down different keys to no avail.  Anyother ideas?  (The serial # is w8******agu if that helps.)  Many thanks.
    <Edited By Host>

    I had the exact same issue...  Macbook Pro late 2008 with Core2Duo.  Went to all the steps suggested in the knowledge base, tried to reset the SMC, but to no avail.   Took it to the Macstore in Mexico, the wanted to replace logic board for $800....  Finally, I sent it to a logic board repair service, where they "fixed"  the logic board for $200.  It worked perfectly for 4 months, then happened again   
    Any ideas??  I would appreciate any help!!!!!

  • Attn: macbook pro won't start up past grey screen NO MATTER WHAT

    my macbook pro won't start up past the grey screen, NO MATTER WHAT I DO. i've searched all the discussions on this, and NOTHING WORKS. nothing caused this either - i was just browing the internet and using ichat, and my computer shut down, and that is when this started.
    I am EXTREMELY disappointed with this bullstein. My computer works great, etc., and I support mac and apple to the nth degree, but then some stupid crap like this happens and I can't use my computer at all. I have to use my sister's **** ibook g3 to even do this.
    PLEASE HELP. do NOT post what you have already posted in the other discussions, and i've already been welcomed to the boards. I can't go to an apple store because i'm on vacation in new mexico for the summer, and there no stores anywhere near here. is there any real advice around here? I need to use my computer. That is why I spent close to $4,000 for it with upgrades and software.

    where can i get an install disc for the macbook pro?
    You really need to use the one that came with your MBP. If you don't have it, a retail Tiger OS X disc should work.
    also, could an archive/install potentially free up some harddrive space on my computer?
    No, it will actually use more space, so you will need at least 6G of free space. To clean your hard drive, use WhatSize.
    WhatSize >>
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • Macbook Pro won't start at all, no chime, no gray screen, nothing

    My 2+ year old MacBook Pro won't start.  Nothing happens when the start button is pushed, no chime, nothing.  I've tried Control-Command-Start; nothing.  I've tried with and without power connected; nothing.  I've unplugged the power adapter from the wall, still nothing.  Any ideas?

    You can try a SMC reset, but it that doesn't power something it needs repair or replacement.
    https://support.apple.com/kb/HT3964
    Sometimes if the battery was really drained or old, it takes a long time to get it started charging again, like a couple of weeks.
    https://support.apple.com/kb/TS1713
    https://discussions.apple.com/message/16276201#16276201

  • My MacBook Pro won't start up please help me

    MacBook Pro won't start up what should I do?

    Hey eddydamasio,
    Thanks for the question. I understand that your MacBook Pro won’t turn on. The following article may help to resolve your issue:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Note: if you hear a startup chime or the fans running, see this article instead:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

Maybe you are looking for

  • In GR/IR Account amount posted two times

    Hai Gurus when i posted goods invoice in gr/ir account two times posted the same amount.how to rectify this problem.In every entry same problem there so any one help me. Thanks in advance NSRao.

  • TS1424 iTunes won't open due to a DEP error-Vista

    My iTunes will not open on my vista because it says there is a DEP error. I've tried everything and I can't get it to work.

  • 8.2 to 8.3 nat conversion

    HI Guys , I have a problem in converting the static nat in fwsm to ASA 8.3 or later. I have a fwsm which we are migrating to ASA, FWSM has a below static nat statement, static (v123,v546) 10.10.10.0 10.10.20.0 netmask 255.255.255.0 When I see the tra

  • How to get DB connection user

    Hi there, In my application, I get the DB connection through DataSource. Now I need to know the connection username (schema), how do I get it? Partial code as follows:           Context initCtx = new InitialContext();           String lookup = "java:

  • Error msg in workflow after patching to 11.1.2.1.600

    Hi! We have recently patched to 11.1.2.1.600 for our Planning solution and we get an error msg in workflow. If the 'Planning Unit Hierarchy' is setup as 'Free form' we get an error message if the users open 'Manage Approvals', select 'Details' for a