Spinning ball in iPhoto
Hi,
I have a Late 2009 Imac, 3.06 GHz Intel Core 2 Duo, 8 GB of memory, Yosemite 10.10.1 and am using iPhoto 9.6 version.
Iphoto is slow to load, spinning ball misery, almost painful to use. I turned off iCloud because it seems to slow it down even more. I have about 90 gigs of photos. Any suggestions.
Thank you
Is iPhoto the only application that is slow? Or are other applications also having problems? How much free storage do you have?
Did the slowness start suddenly or gradually? Can you remember what you did last, before the problem first occurred?
Slowness in iPhoto can be caused by several reasons: The most common reasons are
Lack of free storage. If your Hard Drive is filling up and you have less than 10 GB left, free storage asap.
A corruption of your Photo library. Try to repair or rebuild the iPhoto library: iPhoto 6 and later: Rebuilding the iPhoto library
Currupted media files in your iPhoto Library. If the problem started after you imported new videos or photos, remove the last import from your iPhoto Library.
Storing the library on a network volume.
Instaling incompatible software, that modifies the system.
To find out, if the problem is caused by your iPhoto Library, test with a new iPhoto Library. Is iPhoto more responsive, if you create a new library with a few test photos?
To check, if the problem is system wide, sign into a different user account and launch iPhoto using that account. Is iPhoto more responsive, if you work from a different user account?
Similar Messages
-
Spinning ball of death after latest security update
Help;
I have an IMac (late 2009) , 3.06 GHz Intel Core 2 Duo , 8GiB 1067 MHz, OSX Yosemite 10.10.1
After installing the latest security update my computer is very slow. I am having the spinning ball with iPhoto, Mail, Safari, Firefox, Chrome. Before I rebuild my mailbox, can someone tell me if this is a known problem with the update?
Thanks, Merry ChristmasRestart the computer and also use Disk Utility (Applications - Utilities - Disk Utility) to Repair Disk Permissions and Verify the HD. Then retest the system.
-
Hi I am trying to import photos into iPhoto using two Panasonic cameras both Lumix (DMC TZ3 and DMC FZ30). Worked in the past no problem, I upgrade system when prompted and am running Mac OSX 10.6.8 with iPhoto 9.1.5. When I attach cable from camera to Mac with the DMC TZ3 I get the spinning ball and nothing else and have to force quite and restart to access iphoto again without the spinning ball, with the DMC FZ30, when I plus in the cable I get an icon on the desktop and can go into iphoto and import the photos that way. When the photos have been imported I get the spinning ball again and have to restart the Mac to access iphoto without the spinning ball. Photos do import though.
Can anyone help, a really stupid, non-techie person who has no idea what she is doing, please?
Thank youTry use a different cable.
Regards
TD -
IPhoto spinning ball - at the end of my rope
I can't get iPhoto to load. Every single thing I've tried results in the spinning ball of death.
I've tried:
rebuilding the library
creating a new library on another drive
using iPhoto Library Manager rebuild
restoring the picture library from a back up made before I was having problems with it.
rebuilding thumbnails
removing the .plist and .lock file
creating a new 'empty' library and that locked up too.
Nothing is working and I'm very frustrated.
I've got several gig of space on the drive, so space shouldn't be an issue.
I downloaded Picasa and tried using that, but it locks up, too. What the heck is going on?
I don't know what else to do. I'm thinking I'll have to move all my photos, years worth of them, folder by folder and just put them on another drive and delet iPhoto and start all over again. I don't know if I'd lose any meta data of the pictures if I did that.
Looking for some help, please.That suggests that an external or 3rd party software is causing the problem.
Boot normally and then lauch Console (in your Applications/Utiities folder)
Then Launch iPhoto and see if any messages get written to it.
Regards
TD -
Iphoto 11 spinning balls when viewing photos
Hi - We're pretty frustrated so seeking help here as iPhoto support via Apple Care has not offered a solution to our issue. We have late 2012 iMac 8mb RAM with 3.2 (or 3.4) processor.
We have 3 Nikon cameras; D80, D300S, D800.
The D800 is the newest.
Uploading from cameras into iPhoto works perfectly.
However, when viewing a particular Album that contains photos from all 3 cameras, we get spinning ball and have to wait for up to 30 seconds to go from one photo to another
The spinning ball is random BUT doesn't happen on D80 or D300S photos. Only happens on D800 photos, which makes us wonder if there is a bug in iPhoto. The D800 is supported in iPhoto.
More info: The size of the photo doesn't seem to matter, as this can happen when one is going from a large MB photo to a small one, and visa versa. It doesn't hang on particular photos, but seems to be random.
The D800 is a 35 megapixel camera if that info helps at all. The other cameras are much lower megapixels.
I don't know enough about computers to solve this myself, but iphoto support has not found the problem. I think it's a lot simplier than we think but don't know what to do next.
Apple Care iPhone support had us repair the library and even make a new iPhoto library but we got the same issue.
The album with the issue contains 173 photos, so of which are HDR. It is not getting stuck on HDR photos, but sometimes it can. Like I said, it's random.
When we put that same album into Elements12, there was no issue of spinning balls, so I also wonder if it's the size of the entire library that has something to do with this issue. (the iPhono Library contains 5,000 photos. Support confirmed that there is plenty of free memory so that is not the issue either, but we are going to have the 8mb upgraded to 16MB anyway but we don't believe this will solve anything at this point.
We really wanted to buy Aperture but wonder if we need to resolve this issue in iPhoto first....Thank you & I hope I provided enough info. I tried...-LynnYes, occurs in both RAW & JPEG
Here's what we learned today: when we call up the Album in question (but does happen in other albums but trying to stick with just one for now) it is now confirmed that it's only happening with D800 photos,but doesn't matter the size of photo or whether Jpeg or Raw. Can be either/or.
BUT, once we go thru the entire album of 174 photos, the time lag is gone the second time we view the photos. (no spinning balls & can scroll rapidly thru entire album) Wouldn't this suggest not a camera issue?
If we close out of iPhoto and go back into iPhoto and to that same album, we get the spinning ball delay between some of the D800 photos as before, but also confirm that it doesn't hang up on same photos each time but hangs only on D800 photos.
One more thing that may mean nothing - The abum has 174 photos. The first 100 or so photos were shot with the D80, the next group are D300s, and the last bunch (from photo #145 to 174) are D800, so the hanging doesn't begin until #145, but might not hang until photo 150. It's random, and different each time the album is opened AFTER iPhoto is closed & re-opened. As long as the album remains opened we can even go to other albums & go back to that album & all is still fine. It's just the intial opening of iPhoto each time.
This particular album IS a "rated" album so it has that cog wheel on the album file. Because it contains all photos that my husband rated as "3-star photos", I thought maybe the "smartness" could be the issue, but he has other albums with D800 photos that aren't rated & those photos can also hang...
Hubby has gone out to shoot post-blizzard photos & we'll do as you suggested upon his return & make new iPhoto library! Thanks! Will report back!
Lynn -
IPhoto 08 Spinning Ball When Photo Sharing
Since updating to iPhoto 08 every time I attempt to share my picture library iPhoto freezes and I get a spinning ball. After a number of minutes the ball stops to spin and iPhoto returns to its normal functionality. But, after initializing photo sharing every time I start iPhoto I experience the same problem where iPhoto is unresponsive with the spinning ball for a number of minutes and it returns to its normal functionality. I have read in the posts +*"Topic : iPhoto 08 gives spinning ball for 2 minutes at launch"*+ to delete the iphoto preference file. So I tried this and it fixed my problem of iPhoto freezing on start up but when I try to turn on picture sharing again the problem comes back. The person in this post thought that the freezing was related to the large size of their iPhoto library but I have two libraries one greater then 30 gigs and one smaller then 3 gigs and I have the same problems with both. If someone could help me or give me insight into how I can solve this problem it would be appreciated.
This is definitely an iPhoto issue not a library issue. It took your advise but instead of rebuilding the xml file the library which sits on my internal drive I thought I would start fresh and make a new library and see if the problems persisted in this new library. So I created a new library and before even adding any pictures tried to share the library and the same problems that I had been experiencing happened again. This would lead me to believe that the problem isn't associated with the iPhoto library or any file in its contents but with the iPhoto program itself. But if this is the case I am at a loss because I have already once reinstalled and updated iPhoto to see if that would correct the problem and it didn't.
Thanks
Eric -
Iphoto - get spinning ball when importing photos
I just bought a brand new mac book pro. I had all of my info from my old mac book pro in time machine. The first time I turned on the new one it asked if I had a time machine backup - short story I restored all of my personal files (no applications).
I was able to import photos once since then. I have 3 sd cards - not one of them can be imported. It recognises the card and asks me if I want to import. I have even tried to only import 1 photo - no matter what I do, I still get the spinning ball and nothing gets imported (I finally have to force quit).
I attempted to repair the library, but it never finishes. After hours of waiting I end up force quitting it.
One forum mentioned re-installing, but the mac book pro did not come with any disks (yes you read that correctly).Yes, occurs in both RAW & JPEG
Here's what we learned today: when we call up the Album in question (but does happen in other albums but trying to stick with just one for now) it is now confirmed that it's only happening with D800 photos,but doesn't matter the size of photo or whether Jpeg or Raw. Can be either/or.
BUT, once we go thru the entire album of 174 photos, the time lag is gone the second time we view the photos. (no spinning balls & can scroll rapidly thru entire album) Wouldn't this suggest not a camera issue?
If we close out of iPhoto and go back into iPhoto and to that same album, we get the spinning ball delay between some of the D800 photos as before, but also confirm that it doesn't hang up on same photos each time but hangs only on D800 photos.
One more thing that may mean nothing - The abum has 174 photos. The first 100 or so photos were shot with the D80, the next group are D300s, and the last bunch (from photo #145 to 174) are D800, so the hanging doesn't begin until #145, but might not hang until photo 150. It's random, and different each time the album is opened AFTER iPhoto is closed & re-opened. As long as the album remains opened we can even go to other albums & go back to that album & all is still fine. It's just the intial opening of iPhoto each time.
This particular album IS a "rated" album so it has that cog wheel on the album file. Because it contains all photos that my husband rated as "3-star photos", I thought maybe the "smartness" could be the issue, but he has other albums with D800 photos that aren't rated & those photos can also hang...
Hubby has gone out to shoot post-blizzard photos & we'll do as you suggested upon his return & make new iPhoto library! Thanks! Will report back!
Lynn -
When I want to upload a calendar I made on iphoto it will not complete the upload part when I want to buy the calendar it gets about half way done then freezes up and the spinning ball starts up and nothing happens I have to shout down the imac to get it to stop.I need some help.
When I compose a photo album (using iphoto), I cannot order it
-
IPhoto Freezing and spinning ball appears
I am currently having some problems with my battery power and my Macbook Pro has just switched itself off whilst I was downloading some photos from my camera. I restarted the computer which then stated there were photos available not imported, did I wish to import. I did this, but the spinning ball appeared and I had to force quit. I opened iPhoto a couple more times and each time a couple more photos imported before it froze again. Each time I now start iPhoto as soon as I try to do anything the spinning ball appears and I have to force quit.
Does anyone have any ideas on how I can get iPhoto working again. I have upgraded in the last week to iPhoto09.
Thanks
KathOption 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
MBP retina + Yosemite + MAGSAFE CONNECTED = freeze and spinning ball!!
I'm really losing my mind...
Friday I finally installed Yosemite 10.10 on my mbp retina. At the beginning everything was perfect, then new updates like iphoto and imovie started to pop up so I decided to download them. At some point of the download the spinning ball appeared but didn't want to go away, even after 5 minutes. I couldn't use my macbook so I decided to force shut down.
After restarting I could log in, but as soon as I moved the cursor to the dock and clicked on the apps I needed to open (Mail and Chorme) everything froze and the spinning ball appeared again.
Force shut down again.
The magsafe was connected at all time.
Then I decided to go to the Apple Store to solve the problem. Once I explained the problem to the guy and turned on the macbook in front of him, everything started to work again perfectly.
I looked like a freaking idiot.
He had no explanation, he just told me to use time machine to backup my data and bring the macbook there in case the issue would appear again.
Yes I tried all the possible procedures pressing the keys when the macbook is turned on. (I kept for last the pram reset and smc reset)
Nothing.
Then this morning I realized the freezing at startup would occur only if the magsafe was connected!!! This is also why at the Apple store there was no problem at startup....no magsafe connected. I tried a few times to use the macbook normally with the battery (even now that I'm writing), and it's working perfectly!! But as soon as I connect the magsafe, go to the dock to open apps or simply click on the google chrome tabs to type in a website, everything starts to freeze again and the spinning ball stays there indefinitely.
I also tried the utility disc (in normal and safe mode). It says everything is ok.
I even tried to delete completely iphoto, imovie and caffeine and to reinstall Yosemite.
I don't want to go to the Apple Store now because it's full of people (iphone 6 just got released here in China).
Could someone help me understand what is the problem??
Thank you for all the help you can provideYesterday it started to do the same even with the battery! So it was impossible for me to use it. I went to the apple store...they didn't know what to tell me since the system just got released.
They ran a few tests on my macbook and it showed that it wasn't an hardware issue, it was the software. So they wanted to do a backup of my data (from one of their macbooks) but couldn't because somehow there was a password for Firevault. I never put it!! And it's not the same I always choose for my system.
Result? They had to erase everything (I'm angry because I lost a lot of my work files) and now I'm back to Mavericks 10.9.5 and I have no idea when I'll decide to update again to Yosemite.
Since Steve Jobs passed away Apple is not the same.
My girlfriend has an iphone 5, she installed IOS 8 and everything is slow as ****. Seriously.
It's really disappointing and I (we) don't trust Apple anymore. -
Spinning ball, hard drive, macbook pro
Dear Experts
I have mid 2009 Macbook pro (2.66 Ghz). I am frequently running into spinning ball that freezes my mac even for opening Safari, iPhoto etc. I am user of CPU demending softwares. Here is what I did till now
1. Free space on HDD is 78 GB (out of 320 GB HDD)
2. Ran Disk utility --> verified.
3. SMART status is OK.
4. Fixed all permissions.
5. Ran disk tool pro--> SMART status OK
6. Fixed bad alias
7. Removed all cache, junk, trash with CleanMyMac.
However, problems is persisted. I ran a bad sector check on disk tool pro and it shows all time that scan for bad sectors is failed while rest of the tests passed. I wonder whether my HDD is failing or what? I have already backed up on Time Machine.
Any experts has comments/suggestions? That will be of great help.
Thanks
SaiWhat you describe seems indicative of hard drive failure. You did yourself no favor, however, by running "CleanMyMac" which may have deleted some very important files.
I would recommend doing a full and complete reinstallation of everything. If you still have the 'beachballing' then I would try replacing the drive.
Clinton -
Several macbook issues: date and time, constant spinning ball, super slow
I have a macbook w/ several problems. these problems started about 3 months after i got it and have continued to escalate, now becoming REAL problems.
1. The date and time always "stalls". In order to display the correct date and time i have to click on it (top right), the date and time menu appears, and it naturally resets itself to the correct time. It is not a time zone issue. I think this might happen when it falls asleep, which brings me to problem 2.
2. A lot of times when my computer falls asleep, it doesn't wake up when i open it or when i click the keypad to open. For a while this was such a normal thing that i had to take the battery out for a couple of seconds and then replace it in order for the computer to turn back on. Now, i can push the on/off key to sometimes "wake" it back up. This problem is consistent, yet it doesn't happen every time it goes to sleep. this problem happens maybe 5 times a day.
3. my computer is SUPER SLOW. Not necessarily the internet, just overall performance. Typing emails (entourage) and regular mail. Using excel and word, iphoto, etc. Switching from one program to another causes the spinning ball to appear for longer than normal.
Any suggestions would be greatly appreciated. And, i admit in advance, i am not very good at finding my way around the mac, so detailed instructions would be post appreciated! Thanks.
mac 10.4.11
L2 Cache (per processor): 2 MB
Memory: 512 MBarunodaya wrote:
3. my computer is SUPER SLOW. Not necessarily the internet, just overall performance. Typing emails (entourage) and regular mail. Using excel and word, iphoto, etc. Switching from one program to another causes the spinning ball to appear for longer than normal.
Any suggestions would be greatly appreciated. And, i admit in advance, i am not very good at finding my way around the mac, so detailed instructions would be post appreciated! Thanks.
mac 10.4.11
L2 Cache (per processor): 2 MB
Memory: 512 MB
since you said that you are using excel and word then i'm going to guess that you also have windows on your system... your computer will not function to its full potential running another OS with only 512 of RAM.... you really need up upgrade to at least 1GB for a requirement or 2GB for a much better performance. -
Spinning ball in mail/ with i photo
Was in Apple Mail and went to attach a photo from i photo. When I went to attach> at the application drop down > i photo> the spinning ball just kept spinning and I could not open it. Have the 20 inch 2.0 GHZ imac aluminum. Also just installed the imac update. What is causing it and the cure if there is one.
cally
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD -
My macbook pro has a spinning ball on everything i do
since updating to yosemite everything i do has a spinning ball its driving me mad!! I have added 2gb more RAM and this made no difference today i started up in safe mode and it was fine not a ball spinning in sight, i repaired disk permissions, re started and back came the ball spinning
EtreCheck version: 2.1.2 (105)
Report generated 21 December 2014 21:06:18 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
6 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 6:34:43
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (355.85 GB free)
Encrypted AES-XTS Unlocked Converting
Core Storage: disk0s2 499.25 GB Online
OPTIARC DVD RW AD-5970H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/MacX Video Converter Pro.app
[not loaded] com.digiarty.driver.goodSysAudioCapture (1 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]
Launch Agents: ℹ️
[not loaded] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.cleverfiles.cfbackd.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.regularrateandrhythm.rowmotehelperaide.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[running] com.nchsoftware.expressinvoice.agent.plist [Support]
[running] com.nchsoftware.inventoria.agent.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
searchExt-1
3rd Party Preference Panes: ℹ️
Flash Player [Support]
FUSE for OS X (OSXFUSE) [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 143.03 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 999.49 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 999.49 GB > (Disk used 143.03 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
4% SystemUIServer
2% corestoraged
2% mds_stores
2% launchd
Top Processes by Memory: ℹ️
271 MB mds_stores
187 MB softwareupdated
90 MB Finder
84 MB CalendarAgent
77 MB WindowServer
Virtual Memory Information: ℹ️
1.45 GB Free RAM
3.16 GB Active RAM
446 MB Inactive RAM
1.39 GB Wired RAM
1.92 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 21, 2014, 04:35:46 PM com.apple.AmbientDisplayAgent_2014-12-21-163546_Papesmac.crash
Dec 21, 2014, 02:32:32 PM Self test - passed
Dec 21, 2014, 01:22:26 PM ScreenSaverEngine_2014-12-21-132226_Papesmac.cpu_resource.diag [Details]
Dec 21, 2014, 12:55:00 PM ScreenSaverEngine_2014-12-21-125500_Papesmac.cpu_resource.diag [Details]
Dec 20, 2014, 01:42:01 AM com.apple.WebKit.Plugin.64_2014-12-20-014201_Papesmac.crash
Dec 19, 2014, 05:54:45 PM com.apple.WebKit.Plugin.64_2014-12-19-175445_Papesmac.crash
Dec 19, 2014, 05:50:16 PM com.apple.WebKit.Plugin.64_2014-12-19-175016_Papesmac.crash
Dec 18, 2014, 10:22:47 PM callservicesd_2014-12-18-222247_Papesmac.crashStart time: 20:12:46 12/22/14
Model Identifier: MacBookPro8,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 2:54
Root access: No
Memory
BANK 0/DIMM0:
Size: 4 GB
Speed: 1333 MHz
Status: OK
Manufacturer: 0x85F7
BANK 1/DIMM0:
Size: 2 GB
Speed: 1333 MHz
Status: OK
Manufacturer: 0x80CE
SATA
TOSHIBA MK5065GSXF
FileVault: On Encryption in progress: Percent completed = 8586
Diagnostic reports
2014-12-19 callservicesd crash
2014-12-19 garcon crash
2014-12-21 com.apple.WebKit.Plugin.64 crash x3
2014-12-22 com.apple.AmbientDisplayAgent crash
Shutdowns
Dec 17 20:21:06 cause: -60
Dec 21 14:11:17 cause: -60
Log
Dec 21 16:37:20 process CleanMyMac 2[726] caught causing excessive wakeups. Observed wakeups rate (per sec): 3435; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 46552
Dec 21 16:39:11 process CleanMyMac 2[726] caught causing excessive wakeups. Observed wakeups rate (per sec): 696; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 4775722
Dec 21 20:54:25 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.908: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 21 20:54:26 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.908: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 21 21:53:38 com.macpaw.CleanMyMac2Helper.diskSpaceWatcher: Service exited with abnormal code: 1
Dec 21 22:53:54 com.macpaw.CleanMyMac2Helper.diskSpaceWatcher: Service exited with abnormal code: 1
Dec 21 23:20:12 com.apple.ucupdate.plist: Service exited with abnormal code: 1
Dec 21 23:20:40 utun_start: ifnet_disable_output returned error 12
Dec 21 23:26:31 utun_start: ifnet_disable_output returned error 12
Dec 21 23:27:47 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.290: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 21 23:27:47 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.290: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 21 23:59:45 com.apple.ucupdate.plist: Service exited with abnormal code: 1
Dec 22 00:00:15 utun_start: ifnet_disable_output returned error 12
Dec 22 00:45:08 utun_start: ifnet_disable_output returned error 12
Dec 22 00:45:48 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.282: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 00:45:48 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.282: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 01:45:23 com.macpaw.CleanMyMac2Helper.diskSpaceWatcher: Service exited with abnormal code: 1
Dec 22 17:20:23 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.255: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 17:20:23 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.255: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 17:20:24 utun_start: ifnet_disable_output returned error 12
Dec 22 17:45:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.638: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 17:45:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.638: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 18:45:06 com.macpaw.CleanMyMac2Helper.diskSpaceWatcher: Service exited with abnormal code: 1
Dec 22 19:32:09 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.6534: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Dec 22 19:32:09 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.6534: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Agents
com.nchsoftware.inventoria.agent
com.nchsoftware.expressinvoice.agent
com.macpaw.CleanMyMac2Helper.diskSpaceWatcher
com.apple.photostream-agent
com.apple.AirPortBaseStationAgent
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/UsbEthernetGadget.kext
- com.tomtom.driver.UsbEthernetGadget
/Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
- net.telestream.wmv.import
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.apple.java.JavaAppletPlugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-ins Disabled/Flip4Mac WMV Plugin.plugin
- net.telestream.wmv.plugin
/Library/Internet Plug-ins Disabled/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-ins Disabled/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/OSXFUSE.prefPane
- com.github.osxfuse.OSXFUSEPrefPane
/Library/PreferencePanes/RapportPreferences.prefPane
- com.trusteer.RapportPreferences
/Library/PreferencePanes Disabled/Flip4Mac WMV.prefPane
- net.telestream.wmv.prefpane
/Library/QuickTime/Flip4Mac WMV Advanced.component
- net.telestream.wmv.advanced
/Library/QuickTime/Flip4Mac WMV Export.component
- net.telestream.wmv.export
/Library/QuickTime/Flip4Mac WMV Import.component
- net.telestream.wmv.import
/Library/Spotlight Disabled/iBooksAuthor.mdimporter
- com.apple.MDImporter.iBooksAuthor
/Library/Spotlight Disabled/iWork.mdimporter
- com.apple.MDImporter.iWork
/Library/Spotlight Disabled/Microsoft Office.mdimporter
- com.microsoft.MDImporter.Office
Library/Caches/com.apple.Safari/Extensions/searchExt-1.safariextension
- com.conduit.safari
dylibs
/Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework/Libraries/mbupgx.dylib
/Applications/Microsoft Office 2011/Office/OPF.framework/Versions/14/Resources/OPF_Common.dylib
/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/Fm20.dylib
/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/MicrosoftOLE2TypesLib.dylib
/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RefEdit.dylib
/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RichEdit.dylib
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
/Library/Frameworks/OSXFUSE.framework/Versions/A/Resources/Debug/libmacfuse_i32 .2.dylib.dSYM/Contents/Resources/DWARF/libmacfuse_i32.2.dylib
/Library/Frameworks/OSXFUSE.framework/Versions/A/Resources/Debug/libmacfuse_i64 .2.dylib.dSYM/Contents/Resources/DWARF/libmacfuse_i64.2.dylib
/Library/Frameworks/OSXFUSE.framework/Versions/A/Resources/Debug/libosxfuse_i32 .dylib.dSYM/Contents/Resources/DWARF/libosxfuse_i32.dylib
/Library/Frameworks/OSXFUSE.framework/Versions/A/Resources/Debug/libosxfuse_i64 .dylib.dSYM/Contents/Resources/DWARF/libosxfuse_i64.dylib
/Library/Rapport/bin/RapportDaishi.dylib
/Library/Rapport/bin/RapportKadkadai.dylib
/Library/Rapport/bin/RapportKadkadai538.dylib
/Library/Rapport/bin/RapportKobo6.dylib
/Library/Rapport/bin/RapportNichiren.dylib
/Library/Rapport/bin/RapportTanzan24.dylib
/Library/Rapport/bin/RapportTanzan27.dylib
/Library/Rapport/bin/RapportTanzan28.dylib
/Library/Rapport/bin/RapportTanzan29.dylib
/Library/Rapport/bin/RapportTanzan30.dylib
/Library/Rapport/bin/RapportTanzan31.dylib
/Library/Rapport/bin/RapportTanzan32.dylib
/Library/Rapport/bin/RapportTanzan33.dylib
/Library/Rapport/bin/RapportTanzan340.dylib
/Library/Rapport/bin/RapportTanzan36.dylib
/Library/Rapport/bin/RapportUtil1.dylib
/Library/Rapport/bin/RapportWKLibre534.dylib
/Library/Rapport/bin/RapportWKLibre537.dylib
/Library/Rapport/bin/RapportWKLibre538.dylib
/Library/Rapport/bin/RapportWR.dylib
/Library/Rapport/bin/librooksbas.dylib
/Library/Rapport/bin/librooksmce.dylib
/Library/Rapport/bin/trf.dylib
/Library/Rapport/store/exts/RapportGP/baseline/RapportGP.dylib
/Library/Rapport/store/exts/RapportMS/baseline/RapportMS.dylib
/Users/USER/Library/Application Support/Firefox/Profiles/key80sk8.default/gmp-gmpopenh264/1.1/libgmpopenh264.dy lib
/usr/lib/libenter.dylib
/usr/lib/libignitor.dylib
/usr/lib/sqlite/libtclsqlite3.0.dylib
/usr/local/lib/libosxfuse_i32.2.dylib
/usr/local/lib/libosxfuse_i64.2.dylib
Frameworks
/Applications/Microsoft Office 2011/Office/CalendarCore.framework
- com.microsoft.calendarcore.framework
/Applications/Microsoft Office 2011/Office/CocoaTooltipParser.framework
- com.microsoft.CocoaTooltipParser
/Applications/Microsoft Office 2011/Office/CocoaUI.framework
- com.microsoft.CocoaUI
/Applications/Microsoft Office 2011/Office/DocEx.framework
- com.microsoft.docex
/Applications/Microsoft Office 2011/Office/Gfx.framework
- com.microsoft.gfx
/Applications/Microsoft Office 2011/Office/IRM.framework
- com.microsoft.irm.framework
/Applications/Microsoft Office 2011/Office/MBURibbon.framework
- com.microsoft.ribbon
/Applications/Microsoft Office 2011/Office/MSXML.framework
- com.microsoft.msxml
/Applications/Microsoft Office 2011/Office/MViewLib.framework
- com.microsoft.mviewlib
/Applications/Microsoft Office 2011/Office/MetEx.framework
- com.microsoft.metex
/Applications/Microsoft Office 2011/Office/MicrosoftCSI.framework
- com.microsoft.csi
/Applications/Microsoft Office 2011/Office/MicrosoftCertificate.framework
- com.microsoft.certificate.framework
/Applications/Microsoft Office 2011/Office/MicrosoftChartPlugin.framework
- com.microsoft.chart
/Applications/Microsoft Office 2011/Office/MicrosoftCloudServices.framework
- com.microsoft.mbuCloudServices
/Applications/Microsoft Office 2011/Office/MicrosoftComponentPlugin.framework
- com.microsoft.mcp
/Applications/Microsoft Office 2011/Office/MicrosoftConversionLibrary.framework
- com.microsoft.converterlib
/Applications/Microsoft Office 2011/Office/MicrosoftCredui.framework
- com.microsoft.credui
/Applications/Microsoft Office 2011/Office/MicrosoftDDCS.framework
- com.microsoft.ddcs
/Applications/Microsoft Office 2011/Office/MicrosoftFBA.framework
- com.microsoft.fba
/Applications/Microsoft Office 2011/Office/MicrosoftFS.framework
- com.microsoft.mbufs
/Applications/Microsoft Office 2011/Office/MicrosoftMathFont.framework
- com.microsoft.mathfont
/Applications/Microsoft Office 2011/Office/MicrosoftMenuLibrary.framework
- com.microsoft.menulib
/Applications/Microsoft Office 2011/Office/MicrosoftOLE.framework
- com.microsoft.ole
/Applications/Microsoft Office 2011/Office/MicrosoftOLEAutomation.framework
- com.microsoft.oleautomation
/Applications/Microsoft Office 2011/Office/MicrosoftOffice.framework
- com.microsoft.office
/Applications/Microsoft Office 2011/Office/MicrosoftOfficeDRM.framework
- com.microsoft.MicrosoftOfficeDRM
/Applications/Microsoft Office 2011/Office/MicrosoftOleo.framework
- com.microsoft.oleo
/Applications/Microsoft Office 2011/Office/MicrosoftPTLS.framework
- com.microsoft.msls3
/Applications/Microsoft Office 2011/Office/MicrosoftProofing.framework
- com.microsoft.proofing
/Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework
- com.microsoft.setupui
/Applications/Microsoft Office 2011/Office/MicrosoftWebServices.framework
- com.microsoft.webservices
/Applications/Microsoft Office 2011/Office/MicrosoftWizard.framework
- com.microsoft.wizard
/Applications/Microsoft Office 2011/Office/MicrosoftWlmFile.framework
- com.microsoft.wlmfile
/Applications/Microsoft Office 2011/Office/MsgrLibClient.framework
- com.microsoft.msgrlibclient
/Applications/Microsoft Office 2011/Office/Netlib.framework
- com.microsoft.netlib
/Applications/Microsoft Office 2011/Office/OPF.framework
- com.microsoft.outlook.capi.framework
/Applications/Microsoft Office 2011/Office/ObjCOPF.framework
- com.microsoft.entourage.objcopf.framework
/Applications/Microsoft Office 2011/Office/OfficeAddressBook.framework
- com.microsoft.officeart
/Applications/Microsoft Office 2011/Office/OfficeArt.framework
- com.microsoft.frameworks.officewindowlocalizer
/Applications/Microsoft Office 2011/Office/OfficeWindowLocalizer.framework
- com.microsoft.Oimg
/Applications/Microsoft Office 2011/Office/Oimg.framework
- com.microsoft.openxml.excel.lib
/Applications/Microsoft Office 2011/Office/Open XML for Excel.framework
- com.microsoft.outlook.core.framework
/Applications/Microsoft Office 2011/Office/OutlookCore.framework
- com.microsoft.outlook.legacy.framework
/Applications/Microsoft Office 2011/Office/OutlookLegacy.framework
- com.microsoft.frameworks.outlookpaletteitems
/Applications/Microsoft Office 2011/Office/OutlookPaletteItems.framework
- com.microsoft.outlookrightsframework
/Applications/Microsoft Office 2011/Office/OutlookRightsFramework.framework
- com.microsoft.powerplant
/Applications/Microsoft Office 2011/Office/PowerPlant.framework
- com.microsoft.powerplantcore
/Applications/Microsoft Office 2011/Office/PowerPlantCore.framework
- com.microsoft.igx
/Applications/Microsoft Office 2011/Office/SmartArt.framework
- com.microsoft.urlmon
/Applications/Microsoft Office 2011/Office/StdUrlMoniker.framework
- com.microsoft.threadpool
/Applications/Microsoft Office 2011/Office/ThreadPool.framework
- com.microsoft.uniscribe
/Applications/Microsoft Office 2011/Office/Uniscribe.framework
- com.microsoft.wlmgraphicsdevice
/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework
- com.microsoft.wlmkernel
/Applications/Microsoft Office 2011/Office/WLMGraphicsDevice.framework
- com.microsoft.wlmuser
/Applications/Microsoft Office 2011/Office/WLMKernel.framework
- com.microsoft.frameworks.winapiui
/Applications/Microsoft Office 2011/Office/WLMUser.framework
- com.microsoft.frameworks.wincrypto
/Applications/Microsoft Office 2011/Office/WinAPIUI.framework
- com.microsoft.frameworks.winhttp
/Applications/Microsoft Office 2011/Office/WinCrypto.framework
- com.microsoft.XPG
/Applications/Microsoft Office 2011/Office/WinHttp.framework
- com.microsoft.mbuinstrument
/Applications/Microsoft Office 2011/Office/XPG.framework
- com.microsoft.mbukernel
/Applications/Microsoft Office 2011/Office/mbuinstrument.framework
- com.microsoft.mbulocale
/Applications/Microsoft Office 2011/Office/mbukernel.framework
- com.microsoft.mbunamedstrings
/Applications/Microsoft Office 2011/Office/mbulocale.framework
- com.microsoft.mbustrings
/Applications/Microsoft Office 2011/Office/mbunamedstrings.framework
- com.microsoft.merp
/Applications/Microsoft Office 2011/Office/mbustrings.framework
- com.microsoft.molc.framework
/Applications/Microsoft Office 2011/Office/merp.framework
- com.microsoft.wlmstrings
/Applications/Microsoft Office 2011/Office/molc.framework
- com.divx.divxtoolkit
/Applications/Microsoft Office 2011/Office/wlmstrings.framework
- com.yourcompany.DivXInstallerUtilities
/Library/Frameworks/Adobe AIR.framework
- com.epson.EpsonInformationService
/Library/Frameworks/DivX Toolkit.framework
- com.github.osxfuse.framework
/Library/Frameworks/DivXInstallerUtilities.framework
- net.telestream.license
/Library/Frameworks/EpsonInformationService.framework
- com.eSellerate.EWSMac67108872
/Library/Frameworks/OSXFUSE.framework
- jp.co.canon.bsd.bjcommand2
/Library/Frameworks/TSLicense.framework
- jp.co.canon.bsd.bjessential2
/Library/Frameworks/TSLicense.framework/Versions/A/Resources/EWSMac-GC.framewor k
- jp.co.canon.bj.bjextddi
/Library/Printers/Canon/BJPrinter/Frameworks/BJCommand2.framework
- jp.co.canon.bj.bjpdelocalizedstring2
/Library/Printers/Canon/BJPrinter/Frameworks/BJEssential2.framework
- jp.co.canon.bj.print.BJPrinterUtility2
/Library/Printers/Canon/BJPrinter/Frameworks/BJExtDDI.framework
- jp.co.canon.bj.print.bjstatus2.a
/Library/Printers/Canon/BJPrinter/Frameworks/BJPDELocalizedString2.framework
- jp.co.canon.bj.bjtune
/Library/Printers/Canon/BJPrinter/Frameworks/BJPrinterUtility2.framework
- jp.co.canon.bsd.caddis.09
/Library/Printers/Canon/BJPrinter/Frameworks/BJStatus2.framework
- jp.co.canon.scangear.sgsm5.09.framework
/Library/Printers/Canon/BJPrinter/Frameworks/BJTune.framework
- com.epson.pic.framework
/Library/Printers/Canon/IJScanner/Frameworks/Caddis_09.framework
- com.eSellerate.EWSMac50726193
/Library/Printers/Canon/IJScanner/Frameworks/SGSM5_09.framework
/Library/Printers/EPSON/EPSON PIC Folder/PIC.framework
/Users/USER/Library/Frameworks/EWSMac.framework
App extensions
com.getdropbox.dropbox.garcon
Apps
/Applications/Dropbox.app
Contents of /Library/LaunchAgents/com.trusteer.rapport.rapportd.plist (checksum 527028763)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.trusteer.rapport.rapportd</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Rapport/bin/rapportd.app/Contents/MacOS/rapportd</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Library/Rapport/bin</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Umask</key>
<integer>18</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.cleverfiles.cfbackd.plist (checksum 928112517)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist
PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key><false/>
<key>Label</key><string>com.cleverfiles.cfbackd</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/CleverFiles/BackService.app/Contents/MacOS/cfbackd</string>
</array>
<key>OnDemand</key><false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist (checksum 2453449774)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.macpaw.CleanMyMac2.Agent</string>
<key>MachServices</key>
<dict>
<key>com.macpaw.CleanMyMac2.Agent</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
</array>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
...and 8 more line(s)
Contents of /Library/LaunchDaemons/com.regularrateandrhythm.rowmotehelperaide.plist (checksum 38763893)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.regularrateandrhythm.rowmotehelperaide</string>
<key>MachServices</key>
<dict>
<key>com.regularrateandrhythm.rowmotehelperaide</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.regularrateandrhythm.rowmotehelperai de</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.trusteer.rooks.rooksd.plist (checksum 1478412778)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.trusteer.rooks.rooksd</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Rapport/bin/rooksd</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist (checksum 2932412100)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.macpaw.CleanMyMac2Helper.diskSpaceWatcher</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/open</string>
<string>-F</string>
<string>-g</string>
<string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
<string>--args</string>
<string>-watchDiskSpace</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.nchsoftware.expressinvoice.agent.plist (checksum 3470020450)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.nchsoftware.expressinvoice.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/NCH Software/ExpressInvoice/ExpressInvoiceAgent</string>
<string>-service</string>
</array>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.nchsoftware.inventoria.agent.plist (checksum 817998165)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.nchsoftware.inventoria.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/NCH Software/Inventoria/InventoriaAgent</string>
<string>-service</string>
</array>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Bad plists
/Library/Preferences/com.epson.Epson Customer Research Participation.UnInstallList.plist
/Library/Preferences/com.epson.Epson Event Manager.UnInstallList.plist
/Library/Preferences/com.epson.EPSON Scan.UnInstallList.plist
/Library/Preferences/com.epson.Epson Scanner ICA Driver.UnInstallList.plist
/Library/Preferences/com.epson.Epson Web Support.UnInstallList.plist
/Library/Preferences/com.epson.EpsonNet Config v4.UnInstallList.plist
/Library/Preferences/com.epson.Inkjet Printer Driver.UnInstallList.plist
/Library/Preferences/com.epson.PC-FAX Driver.UnInstallList.plist
Firewall: On
Safari extensions
Trovi Search for Safari
Restricted files: 1481
Lockfiles: 7
Elapsed time (s): 1521 -
Slow Mac with recurrent spinning ball of doom
Please help,
My Mac has always been slow since I had it and migrated my PC content to my Mac. I have run EtreCheck and hope that this might illuminate the cause of my issues, but worry that it may not. ANYTHING I ask the Mac to do will be slow and inevitably cause a spinning ball for a while. I have kept the system up to date. I have a lot of photos in iPhoto but can't imagine this can be the cause?
Any help is much appreciated. The Etrecheck output is below:
Many thanks.
Problem description:
Slow Mac with poor internet connectivity and recurrent spinning circle of doom
EtreCheck version: 2.1.6 (109)
Report generated 16 January 2015 20:09:37 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 110
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 10 days 7:54:28
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (226.60 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
8 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
[killed] org.cups.cupsd.plist
11 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Support]
[running] com.mcafee.reporter.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.bombich.ccchelper.plist [Support]
[invalid?] com.mcafee.ssm.ScanFactory.plist [Support]
[invalid?] com.mcafee.ssm.ScanManager.plist [Support]
[running] com.mcafee.virusscan.fmpd.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.f-secure.sync.BTCloud.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Mail Application (/Applications/Mail.app)
BT Cloud Application (/Applications/BT Cloud.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
CitrixICAClientPlugIn: Version: 11.1.0 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30214.0 - SDK 10.6 [Support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
SiteAdvisor [Installed]
3rd Party Preference Panes: ℹ️
Citrix online plug-in [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 272.28 GB
Destinations:
My Book [Local]
Total size: 2.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
1% BT Cloud
0% ocspd
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
180 MB Mail
113 MB com.apple.WebKit.WebContent
103 MB BT Cloud
94 MB Safari
77 MB Google Chrome
Virtual Memory Information: ℹ️
41 MB Free RAM
1.18 GB Active RAM
1.16 GB Inactive RAM
918 MB Wired RAM
54.83 GB Page-ins
725 MB Page-outs
Diagnostics Information: ℹ️
Jan 16, 2015, 01:20:19 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-16-132019_[reda cted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH 25 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t PlistBuddy{,' 2>&1'}' -c Print' OSBundleRequired 1157 20 ' function f() { n++;sub(/^/,"^");gsub(/\./,"\\.");gsub(/\+/,"\\+");gsub(/\-/,"\\-");gsub(/\?/,"\\?");print|"sort|uniq";};function g(N,d) { if(n<N) print d;};' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=(\\n%s{:\ ,\\n\\n}%s\\n '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n '"${p[50]}"'mod date: %s\n '"${p[50]}"'checksum: %s\n%s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' {Privacy,Mode}': %s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' "${p[56]}"\ ' $0&&!/ /{f()} END{g(10,"^com\.apple\.")} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p;' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36}|apple\.launchctl\.(Aqua|Background|System))$/ { print $3":"$2;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' "${p[56]}"\ ' /\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/{f()} END{g(900,"^/System/")} ' ' /\.dylib$/!d;s/(\.|\+|\-|\?)/\\\1/g;s/^/^/p;' "${p[56]}"\ ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");f();} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]"\.plist\t"c[i];g(500,"Launch");} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/(ok.+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :'${p[53]}' "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="'"${p[28]}"'";printf("'"${f[4]}"'",$1,$2);} else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[9]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[25]}'||T<'${p[55]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[10]}"'",m);} ' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if($2!="="||!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|\-(4[34])?)$/p' ' BEGIN{FS=":"};{ if($2) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else print $1;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil "${p[52]}\\" whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 "{bundle,mach-o-dylib}"`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info}\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel}\ extensions Heat System\ load boot\ args FileVault Diagnostic\ reports Log {Free\ space,Swap}' (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports User Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors Bad\ plists I/O\ errors Memory\ pressure SMC Shutdowns 'High file counts' );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';printf "Revision: %s\n\n" ${p[54]};};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Ev "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 22;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 53;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 7;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 8;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B3 7 7 73;B1&&{ A8 18 26 23;B7 7;B4 0 0 74;C3 23;};A2 18 26 23;B7 7;B4 0 0 74;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 6;D13 25 37 32 31;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 2;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 33;D13 4 8 41 52;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 32;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 1;D23 22 9 37 57;A9;C2 39;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Problem with commandButton in a custom DataTable
I am trying to write a cutom DataTable and am having some trouble. I don't think that the DataTable that gets shipped has the flexibility that we need for our pages. That's why I'm trying to write my own. What I have is a commandButton in one of the
-
hi, i want to kow from which version jdk release sax parser is being supported. regards ac
-
Can I skype with a group of 4 using my IPAD mini? ...
I could only hear the callers but could not see them. Is it just not part of the IPAD app or do I have to pay extra to be able to video from my mini pad. Thanks so much!
-
Downloading oracle 9i database for windows xp
I am working on winXP-32 bit. I have downloaded for winxp-64bit. When I tried to run setup file it is saying it is not a valid 32 bit application. If I have to download for winxp-32 bit , there are 3 zip files. Actually I want only the standard editi
-
My Adobe Flash Player stops playing sound in the middle of playing a disk or online news report.
The screen comes up and says Flash Player 5.0 has stopped do you wish to close?