Spinning Beach Ball - Network Issue?

Hi Folks,
I know there have been posts on this over time but my particular question does not appear to have been answered. My apologies if I missed a response somewhere else in the forums. I'll try to keep it short.
Basically, a month or so ago I started getting the spinning beach ball in any application at various points of time. There was no rhyme or reason it seemed. It could happen when I have one application open, 5 applications open, it could happen in 5 five minutes or 2 hours later. Once the beachball started spinning, it wouldn't go away and it prevented me from using other apps as well, compelling me to do a manual shut down. I typically use only iPhoto, Safari, iDvd, Numbers and Mail. It could happen in any of them.
I've tried everything. Apple tech support had me do an archive and install - didn't work. I got Disk Warrior 4.2. Nope. I deleted plug-ins and did some other maintenance tasks etc., etc. but nothing worked.
Activity Monitor didn't seem to show anything alarming. Same with Console. Apple suggested I bring it into a tech at the local Apple Store. I did that and after 4 days of running their diagnostics, they could not replicate the 'hang' on the applications. That is, they found no problems with the Macbook - hardware or software.
Now I'm wondering (not being a computer savvy person I don't know if this is possible) if this is a wireless internet issue. Could my home network be a source of the application 'hang' (spinning beach ball) that I've experienced? It's the only thing I can think of that is different from my home computer set-up to the store. My router/modem is a SMC Gateway.
Any thoughts are really appreciated. Thanks so much for your brains on this!
Andyman

Ok folks,
I've got the one from yesterday and another one today below it. This was running while I was trying to burn a DVD in iDVD. Nothing else was running as far as I know and Airport was turned 'off':
10-09-19 7:08:45 PM com.apple.launchd[1] * launchd[1] has started up. *
10-09-19 7:09:16 PM com.apple.launchd.peruser.501[84] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-09-19 7:09:26 PM com.apple.launchd.peruser.501[84]
(com.apple.Kerberos.renew.plist[102]) Exited with exit code: 1
10-09-19 7:09:50 PM com.apple.WindowServer[62] Sun Sep 19 19:09:50 andrew-maneras-macbook.local WindowServer[62] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-09-19 7:33:47 PM com.apple.launchd.peruser.501[84] ([0x0-0x11011].org.m0k.handbrake[131]) Exited: Terminated
10-09-19 8:09:29 PM com.apple.backupd-auto[229] Not starting scheduled Time Machine backup - time machine destination not resolvable.
10-09-19 8:17:32 PM SystemUIServer[89] It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil. This is a programming error. Break on _NSWarnForDrawingImageWithNoCurrentContext to debug. This will be logged only once. This may break in the future.
10-09-19 8:22:02 PM [0x0-0x2c02c].backupd-helper[236] Not starting Time Machine backup after wake - failed to resolve alias to backup volume
10-09-19 9:47:00 PM com.apple.launchd[1] * launchd[1] has started up. *
10-09-19 9:48:48 PM com.apple.launchd[1] * launchd[1] has started up. *
10-09-19 9:49:39 PM com.apple.launchd.peruser.501[82] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-09-19 9:49:48 PM com.apple.launchd.peruser.501[82] (com.apple.Kerberos.renew.plist[105]) Exited with exit code: 1
Here's another one today that occurred during a print attempt:
10-09-20 12:01:17 PM com.apple.launchd.peruser.501[84] (com.apple.Kerberos.renew.plist[104]) Exited with exit code: 1
10-09-20 12:35:06 PM com.apple.launchd[1] * launchd[1] has started up. *
10-09-20 12:35:55 PM com.apple.launchd.peruser.501[84] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-09-20 12:35:57 PM com.apple.launchd.peruser.501[84] (com.apple.Kerberos.renew.plist[103]) Exited with exit code: 1
10-09-20 5:14:12 PM [0x0-0x18018].backupd-helper[143] Not starting Time Machine backup after wake - failed to resolve alias to backup volume
10-09-20 5:17:02 PM [0x0-0x1c01c].com.apple.iWork.Keynote[165] objc[165]: Class SFXMeshAnimation is implemented in both /Applications/iWork '08/Keynote.app/Contents/Resources/Animations/Bolt.sfxplugin/Contents/MacOS/Bol t and /Applications/iWork '08/Keynote.app/Contents/Resources/Animations/Kiln.sfxplugin/Contents/MacOS/Kil n. One of the two will be used. Which one is undefined.
10-09-20 5:17:02 PM com.apple.WindowServer[63] Mon Sep 20 17:17:02 andrew-maneras-macbook.local WindowServer[63] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-09-20 5:17:14 PM Keynote[165] * WARNING: Method setDrawsGrid: in class BGOutlineView is deprecated. It will be removed in a future release and should no longer be used.

Similar Messages

Contents of one network folder won't display - spinning beach ball

I have an eMac on a network running 10.3.9 which, even though the user is properly authenticated on the network, it will not display the contents of one single folder. All the other folders' contents display perfectly and the user can interact with the server and its' contents without any problems. All the other users on the network can interact with the folder in question without any problems, which tends to lead me back to a problem on this one eMac.
The folder in question is inside the main share and all the other folders are as well. Again, the user can traverse the directory structure without any problems. She can use any file, read, write, save, change, delete any file without any problems in any folder EXCEPT in this one folder.
When the user tries to access the folder, the result is the perennial spinning beach ball.
I've tried all the usual tricks. Cache cleaning, directory repairs, permission rebuilds, prebinding rebuilds, log file maintenance, etc., etc. to no avail. I'd appreciate your thoughts. Thanks.

Have you tried logging in with any of the other user's credentials from her system?
Also, have you tried a different user account on her system. (With either her or anyone else's login info for the server.)

Spinning Beach Ball when turning off Airport WiFi. SL Issues, many! Help!

I performed a clean installation of Snow Leopard on my new 13 inch late 2009 MBP on release date. All of a sudden, I am getting the infamous spinning beach ball when attempting to disable my Airport wifi. It's so bad, that I am not able to gracefully restart my system. Seriously this is getting out of hand. Snow Leopard was supposed to make Leopard even more stable.
Steps I have taken, not in any particular order.
Verified and repaired permissions.
Ran HW test, no issues found
Reset PRAM
Deleted wifi related plist files from /lib/prefs/sysconfig and rebooted;
The only thing I can think of next is to perform and Archive and Install or....
...As much as I would hate to go back, Install Leopard.
I would appreciate feedback or suggestions as what to do. Looks like 10.6.1 may be worth waiting for. Oh how I miss Tiger.

HI,
If you use an Airport Base Station or Airport Express, try resetting.
If that doesn't help...
Boot from the 10.6 disk and verify the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
If necessary, do an Archive an Install. It's the only install option available for Snow Leopard.
Carolyn

How to solve Macbook slowdown and spinning beach ball issue

I've only had my Macbook Pro for one year so far, so it's JUST outside of warranty by about a month. Over the last few months or so, I've noticed it start to lag when opening applications or loading files. Sometimes webpages will cause a spinning beach ball which will then take around a minute or two before it kicks into life again.
I'm wondering if there's any reason for this or what I can do to clear up the issue? I've still got over half the amount of hard disk space available on my laptop, so I'm assuming it's not to do with that, and I can't see anything in activity monitor that stands out as being a true culprit of this. Is it just typical slowdown caused by having a lot of programs installed over time?
I usually find it happens more when I'm trying to load another program or do simultaneous projects at once. However, although I only occasionally turn off my laptop fully (it's usually in standby for most of the time) I find initial startup time when loading the laptop up takes longer than it should when it's logged in to settle down. I'm guessing this could be the number of things I have on startup but I'm not sure if there's anything I could remove that would speed up the issue.
Any advice you could give would be appreciated. Thanks!

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Unix issue - spinning beach ball f death

Need some assistance for a new Mac user.
While closing an application or shut down I receive the spinning beach ball. I am not able to shut down and must do a hard shut down. I spoke with some one at the Apple store. He mentioned this is a UNIX error resulting from a communication error with an application. He suggested I run an application or utility that would fix this issue. He stated it is something that should be run approximately once per month.
Now that it's several hours later I can't remember the utility. It's some thing in the utility folder or System Performance screen. Can some one tell me what utility I need to run to re-establish the UNIX and applications link (I'm not using the correct term to describe what the application does).
Thanks for the assistance.
ejg

In Apps/Utilities is the Disk Utility. This can be used to Repair Disk Permissions on your boot volume. Select your boot volume in the left pane and in the First Aid pane Repair Disk Permissions. You can use the same Disk Utility when booted from your Install Disc 1 to Repair Disk. Disk Utility is located in the Utilities menu when you are in the Installer on Install Disc 1.
Although it is not completely up-to-date yet for Leopard, you can learn a lot about maintaining Mac OS X from the X Labs.

How I fixed the Spinning Beach Ball Issue

Ok, like many of you, I was also getting iTunes to hang when plugging in my shuffle, and it would just sit with the spinning beach ball. Even after an hour, it was still frozen. Well, I just fixed mine.
I went to check the Library File to see if it was too large or something, and I found my Music folder wouldn't open, and when it did it showed 0 items, yet iTunes was still playing songs. So I ran TechTool Deluxe on it (it came with your APP if you bought one). Anyway, it found Volume errors on the music drive. So I backed up the music folder to another drive, and let TechTool repair the errors. When it was done, I ran it again, no errors. I then opened iTunes, plugged in my shuffle, and it instantly grabbed new songs via Autofill and sync'd. So, I think the iTunes installer is causing errors to the volume, which is causing the hang ups. TechTool was able to fix the errors, and now iTunes runs fine. Hopefully that will help a few of you get yours working again.
For the record, I store my music on my secondary internal drive, and keep the library in my user folder on the boot drive. After running the fix, everything appears to be just fine, and from what I can tell I lost no data.

I hope your Tech Tool Deluxe disk was not version 3.0.3 or earlier. If you used a version of Tech Tool that was incompatible with Tiger, you may have corrupted your harddrive.
Mac OS X 10.4: Don't use Tech Tool Deluxe 3.0.3's Volume Structure repair
http://docs.info.apple.com/article.html?artnum=301353
Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes
http://docs.info.apple.com/article.html?artnum=301269

Spinning beach ball woes on 27 inch iMac

We have a mid 2010 27 inch iMac (and also a late 2010 13 inch MacBook Air, from which I am writing this post). About 6 months ago it was starting to get spinning beach balls, which I attributed to not having updated the OS (then 10.7). Having upgraded the Air to Mavericks with success, I also upgraded the iMac to Mavericks, and the beach balls got much, much worse, rendering the thing nearly unusable. I cannot for the life of me figure out what the issue is, particularly because the Air, which is about the same vintage, is working great under the same setup. Can someone who has not been staring at this problem for 6 months help?
Here's what I've got:
As I mentioned, mid 2010 27-inch iMac, 1TB hard drive, about half-full, backing up to a 2 TB Time Capsule.
We have two wifi networks to cover the whole house; one is integrated with the cable company's provided router and sits in the basement, and the other is the Time Capsule hooked up to the cable company's VoIP router upstairs. Because you cannot use the Time Capsule to extend an existing network if it is not an Apple network, I resorted to setting each wifi network up independently (separately connected to ethernet). My Air navigates this just fine, as do our iPads/iPhones, and I don't notice a speed difference between the two networks (assuming I have equally good reception wherever I am).
Notably, the Time Capsule seems to randomly stop broadcasting wifi every now and then (at intervals of a few days to a couple weeks), which requires a restart to get it working again. (This could be totally unrelated.)
The iMac was at 10.7 when the beach balls started; upgrading to Mavericks made the slowness/beachballs worse. As I noted, Mavericks did not cause any trouble with the Air.
The beach balls seem to coincide with a complete stall in everything the computer is doing. After the stall ends, the computer can be fairly speedy, so it's as if it pauses for several seconds to a minute or so to think very hard, and then goes back to its business.
There is usually a slight improvement if I shut down and boot up again, but it gums up pretty quickly.
Here's what I've done:
Started with 4GB RAM; added another 8 (total 12) after this all started. Equally bad before and after.
Stared at Activity Monitor and Console for long periods of time while watching for beach balls to try to detect a pattern.
In Activity Monitor, memory pressure is fine (esp. now that I added 8 GB), no swap used. The two worst offenders under CPU usage seem to be kernel_task or WindowServer, but they are not always monopolizing the CPU at the times when it is stalled.
In Console, the main two patterns seemed to be a frequent WindowServer "updates forcibly disabled" error, and what seemed like a constant browsing for wifi connections even though the computer was already connected to wifi. However, I couldn't figure out what either of these meant or what might be done to fix them.
Used disk utility, repaired permissions, verified disk, etc. - everything was ok, although some permissions were repaired.
Used third-party utilities, Onyx and iDefrag, to try to verify disk and clean things up. No significant problems detected, and no improvement.
Various other methods of cleaning up -- eliminating old software or files that aren't being used, emptying trash, taking extra files off the desktop, etc. In particular, having read that Mail might have issues handling Google accounts, I eliminated a heavily-used Google account from Mail and got a separate, lighter-weight third-party app to handle that account. That did seem improve things at first, but we seem to be back to slowness and beach balls again.
Final, last-ditch effort: backed up and then erased hard drive and (after another Disk Utility verify - still fine) did a clean install of Mavericks.
It took several attempts to download the installer using the Time Capsule network (kept stalling); switched to the other (non-Apple) wifi network and it downloaded and installed fine.
However, after the clean install, although it was not nearly as slow as before, amazingly, I still had spinning beach balls and hanging without having installed anything other than the OS.
I made several attempts to get into the backup to selectively reinstall files. Could not mount backup using Time Capsule -- option-clicking and selecting "Browse Other Backups" did not actually get me to the other backup. Using Migration Assistant, could not get the backup to load, or the loading was taking an inordinately long period of time, so I gave up. (Also, every time I tried to quit Migration Assistant to try to discover the problem with the backup loading, it hung and I had to hard-restart.)
So, since the clean install did not seem to fix the problem, and I was starting to worry about not being able to get to my backup, I have gone back to just restoring from the Time Capsule. It's telling me this will take over 200 hours.
The one thing I haven't tried is shutting down the computer, lugging it upstairs, and connecting it to Time Capsule via ethernet, at least for the restoration. I will do this if I leave the computer overnight and it's still not done in the morning.
I've done much searching of these discussion boards, and tried everything that seemed like a possible culprit. What am I missing? (Other than ditching this computer and buying a different one?)

We have a mid 2010 27 inch iMac (and also a late 2010 13 inch MacBook Air, from which I am writing this post). About 6 months ago it was starting to get spinning beach balls, which I attributed to not having updated the OS (then 10.7). Having upgraded the Air to Mavericks with success, I also upgraded the iMac to Mavericks, and the beach balls got much, much worse, rendering the thing nearly unusable. I cannot for the life of me figure out what the issue is, particularly because the Air, which is about the same vintage, is working great under the same setup. Can someone who has not been staring at this problem for 6 months help?
Here's what I've got:
As I mentioned, mid 2010 27-inch iMac, 1TB hard drive, about half-full, backing up to a 2 TB Time Capsule.
We have two wifi networks to cover the whole house; one is integrated with the cable company's provided router and sits in the basement, and the other is the Time Capsule hooked up to the cable company's VoIP router upstairs. Because you cannot use the Time Capsule to extend an existing network if it is not an Apple network, I resorted to setting each wifi network up independently (separately connected to ethernet). My Air navigates this just fine, as do our iPads/iPhones, and I don't notice a speed difference between the two networks (assuming I have equally good reception wherever I am).
Notably, the Time Capsule seems to randomly stop broadcasting wifi every now and then (at intervals of a few days to a couple weeks), which requires a restart to get it working again. (This could be totally unrelated.)
The iMac was at 10.7 when the beach balls started; upgrading to Mavericks made the slowness/beachballs worse. As I noted, Mavericks did not cause any trouble with the Air.
The beach balls seem to coincide with a complete stall in everything the computer is doing. After the stall ends, the computer can be fairly speedy, so it's as if it pauses for several seconds to a minute or so to think very hard, and then goes back to its business.
There is usually a slight improvement if I shut down and boot up again, but it gums up pretty quickly.
Here's what I've done:
Started with 4GB RAM; added another 8 (total 12) after this all started. Equally bad before and after.
Stared at Activity Monitor and Console for long periods of time while watching for beach balls to try to detect a pattern.
In Activity Monitor, memory pressure is fine (esp. now that I added 8 GB), no swap used. The two worst offenders under CPU usage seem to be kernel_task or WindowServer, but they are not always monopolizing the CPU at the times when it is stalled.
In Console, the main two patterns seemed to be a frequent WindowServer "updates forcibly disabled" error, and what seemed like a constant browsing for wifi connections even though the computer was already connected to wifi. However, I couldn't figure out what either of these meant or what might be done to fix them.
Used disk utility, repaired permissions, verified disk, etc. - everything was ok, although some permissions were repaired.
Used third-party utilities, Onyx and iDefrag, to try to verify disk and clean things up. No significant problems detected, and no improvement.
Various other methods of cleaning up -- eliminating old software or files that aren't being used, emptying trash, taking extra files off the desktop, etc. In particular, having read that Mail might have issues handling Google accounts, I eliminated a heavily-used Google account from Mail and got a separate, lighter-weight third-party app to handle that account. That did seem improve things at first, but we seem to be back to slowness and beach balls again.
Final, last-ditch effort: backed up and then erased hard drive and (after another Disk Utility verify - still fine) did a clean install of Mavericks.
It took several attempts to download the installer using the Time Capsule network (kept stalling); switched to the other (non-Apple) wifi network and it downloaded and installed fine.
However, after the clean install, although it was not nearly as slow as before, amazingly, I still had spinning beach balls and hanging without having installed anything other than the OS.
I made several attempts to get into the backup to selectively reinstall files. Could not mount backup using Time Capsule -- option-clicking and selecting "Browse Other Backups" did not actually get me to the other backup. Using Migration Assistant, could not get the backup to load, or the loading was taking an inordinately long period of time, so I gave up. (Also, every time I tried to quit Migration Assistant to try to discover the problem with the backup loading, it hung and I had to hard-restart.)
So, since the clean install did not seem to fix the problem, and I was starting to worry about not being able to get to my backup, I have gone back to just restoring from the Time Capsule. It's telling me this will take over 200 hours.
The one thing I haven't tried is shutting down the computer, lugging it upstairs, and connecting it to Time Capsule via ethernet, at least for the restoration. I will do this if I leave the computer overnight and it's still not done in the morning.
I've done much searching of these discussion boards, and tried everything that seemed like a possible culprit. What am I missing? (Other than ditching this computer and buying a different one?)

Spinning Beach ball in Pages 5.2

I know there are other posts about the spinning beachball in Pages but the situation here is a little different to what others have experienced. At a small school I work at, since upgrading to Pages 5, there have been huge problems with the spinning beach ball in Pages 5. This did not occur in Pages 4. I use Pages 5 all the time at home with no issues and while at other schools. But as soon as I arrive in the school here and the computer connects to the network, the Beachball starts. This morning, I just wanted to type up some brief notes for a meeting. As soon as I started typing up the notes, the Spinning Beachball showed up and started spinning. You can keep on typing with nothing being added to a line and after 20 secs or so, your typing suddenly catches up and then it starts spinning again. I switched the wireless off and as soon as I did that, I could type normally. When I switched the wireless back on to print the notes, the spinning beach ball started up again. This is the ONLY programme this happens with and it didnʻt happen with Pages 4. It has to be network related and obviously Pages is trying to connect to get something from the Internet but what and where? Teachers are getting really frustrated. Any suggestions to stuff I could try would be much appreciated. It would be really great if Apple could sort out Pages and return it back to the great programme it was!

Thanks Peter but with all the school laptops, desktops and teacher laptops, which have all been upgraded, it would be too big a task. The most distressing thing of all is that I had just got the Principal using Pages a while back, as I showed her how quick Pages 4 was to create school policy and planning documents and when they upgraded all the school documents to Pages 5 (Iʻm not a permanent school staff member, only a once a week classroom IT support person) the documents all went to custard where they had used linked Text boxes. I have written a few publications using Pages 4, and I loved it as a fast, clean, easy to use publisher for simple stuff (Iʻll be using Pages 4 this weekend to do a Centenary booklet - I use Indesign for professional stuff) but the two things that now drive me mad is the lack of linked text boxes and the fact you canʻt slide the page thumbnails on the left hand side to rearrange page order as you could in Pages 4. Iʻve heard that a lot of this was removed so they could do the iOS version and make them the same for synching and that the features will come back, but I wish it was sooner rather than later. It is interesting to read of important institutions like Doctors surgeries who have had all their records mucked up by the changes. After doing PD with the staff on using Pages and encouraging them to use it (with the Principalʻs enthusiasm and endorsement) at this school, they have gone back to using Word and I dare not mention Pages again! I hope Apple reads this!

Spinning Beach Ball occurs often

I keep having issues where I'll get spinning beach ball. Not sure how to diagnose. I've noticed it happened today with Chrome today, and display settings yesterday/today. It's starting to occur often.
Problem description:
Spinning beach ball occurs often
EtreCheck version: 2.1.8 (121)
Report generated March 23, 2015 at 2:10:44 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Early 2013) (Technical Specifications)
    MacBook Pro - model: MacBookPro10,2
    1 3 GHz Intel Core i7 CPU: 2-core
    8 GB RAM Not upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 17
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD spdisplays_2880x1800Retina
        DELL P2210 1680 x 1050 @ 60 Hz
        DELL P2210 1680 x 1050 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 23:14:30
Disk Information: ℹ️
    APPLE SSD SD512E disk0 : (500.28 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Untitled (disk1) / : 499.06 GB (467.59 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Yubico Yubico Yubikey II
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Spotify    Application Hidden (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Untitled: Disk size: 499.06 GB Disk used: 31.47 GB
    Destinations:
        Duane's TimeMachine [Network]
        Total size: 125.06 GB
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Adequate
            Backup size 125.06 GB > (Disk used 31.47 GB X 3)
Top Processes by CPU: ℹ️
        17%    WindowServer
         4%    Google Chrome
         3%    hidd
         2%    coreaudiod
         1%    diskimages-helper
Top Processes by Memory: ℹ️
    232 MB    mds_stores
    232 MB    Google Chrome
    112 MB    WindowServer
    101 MB    Google Chrome Helper
    94 MB    iTerm
Virtual Memory Information: ℹ️
    675 MB    Free RAM
    3.49 GB    Active RAM
    2.63 GB    Inactive RAM
    1.22 GB    Wired RAM
    49.57 GB    Page-ins
    467 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 22, 2015, 02:55:57 PM    Self test - passed

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Print error - there was a problem connecting to the server - spinning beach ball

This has happened pre-yosemite and since. It used to only happen at home but now also happens at work. Every time I try to print, I get a spinning beach ball and a long delay until I get an error message saying there was a problem connecting to the server. At home, after clicking OK, I get a second spinning beach ball session with same error. Once I click OK second time, I get print window and can print. At work, it's only one session of spinning beach ball. The office problem occurred after upgrading to yosemite. I've deleted and added the printers without resolution. I've repaired permissions. The home problem has been going on for at least a year, probably a couple. Using a macbook pro.

There are many possible causes for this issue, and it may be very hard to resolve without wiping your account clean of everything except documents as a last resort. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
Try rebuilding the iPhoto library, if applicable.
Step 8
Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
Step 9
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 10
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 11
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Lightroom 3+ (Mac OSX) Spinning Beach Ball on Import only?

Hello --
When I first starting using Lightroom 3 on my 27" quad-core iMac, detection of an inserted memory card (Compact Flash or SDHC) was instantaneous. It's one of the things that really attracted me to Lightroom -- plug in, and go!
Sometime after around 3.2 or so, the spinning beach ball (http://en.wikipedia.org/wiki/Spinning_wait_cursor) started appearing for about 60 to 120 seconds every time I inserted a card. I first thought it might be the cheap $10 Compact Flash USB 2.0 reader I was using, so I invested in a firewire reader from Synchrotech, since it appears the Lexar one has disappeared off of the market. No change.
Here are some other facts:
- This happens every time I import with no exception.
- Once the spinning beach ball goes away, performance is as expected (very fast).
- The spinning beach ball almost never appears anywhere else in Lightroom.
- Outside of Lightroom, the finder recognizes the cards immediately after inserting, and I can get to the files and copy them without any issue.
- I have tried Sandisk and Lexar cards of a variety of speeds and sizes. No difference.
- The problem happens with catalogs that already have images and brand new catalogs (no difference in performance).
- My catalogs are stored on local disk, and the photo files are located on a fileshare over GB ethernet. This environment has been the same before and after I experienced the spinning beach ball during import.
- During the spinning beach ball, the network switch is "bored," so I have a pretty good idea that the Mac isn't trying to scour or index the fileshare.
- I have updated to the latest: the just-released Lightroom 3.4. No change.
- I have tried both the "automatically bring up the Import dialog on card insert" as well as the manual approach where I have to click on Import in the Library module. I have also tried going into the Import section and then inserting a card. All have the same effect -- a guaranteed beach ball when Lightroom figures out a card is there.
I hope someone else is experiencing this issue and can give me a tip or two to make it go away. Two minutes to wait for the system to do absolutely nothing every time I put in a card is ridiculous!
-- Justin

a lock file is created every time LR is opened. It stops the database being accessed by more than one application. Sometimes, due to an improper shut down of LR the lock file remains. As you have discovered, in this case, you cannot open LR until you delete the lock file.

Spinning "Beach Ball" in Finder

I have a 2007 MacBook Pro running OS10.9.5. I recently noticed that whenever I double-click on an icon in the Finder the "spinning beach ball" occurs for about 20 seconds. Afterwards, the page will then load. This problem does not occur in any app; only the Finder.
I wold appreciate any thoughts as to why this issue occurred all of a sudden. Thank you kindly.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Spinning Beach Ball Delay with "Look for Shared Photos" Checked

We installed iLife '06 on our school computers - all 500 of them - this fall. It is version 6.0.4. However, upon launch, there is a long delay of about 2-4 minutes with a spinning beach ball that we've determined takes place because iphoto is looking for shared libraries. We have one shared library on the network at this time, but sometimes teachers turn on sharing, or have in the past.
Last year, we were using iPhoto '04 and had no problems like this at all -shared libraries appeared immediately, just as quickly as shared libraries in itunes still do.
Has anyone experienced this - is there a known issue? Or should I look for a network problem.

Solved this problem myself. It was a dns issue. For some reason, when iphoto looks for shared photo's, it does a reverse lookup on the ip of any machine it finds that has sharing turned on. If there is no reverse lookup zone on your dns server running OS X then it locks up as it repeatedly sends the request. Simply creating a reverse zone for the ip address range of your clients makes the bug go away. Why it needs to do a reverse lookup is beyond me.

Final cut Spinning Beach Ball when i press spacebar to playback the sequenc

Hello,
We have 5 machines with xsan, final cut and open directory. On one only machine, when i playback secuences appears the spinning beach ball for 5 seconds before playing. The When i restar that machine, the final cut playback correctly again, but if i'm working with Final for 1 hour or 2, this happens again. I uninstall the final cut and reinstall it, and this still happening.
does anybody any idea about it?
thank for your time.

Anything about that particular workstation that sets it apart form the others? Installed software, background processes, attached hardware/peripherals? Does the issue happen regardless of the account being used?
Have you run any diagnostics on that machine? All the basic system troubleshooting steps taken? Eg Repaired permissions, Rebuilt with Disk Warrior (commercial product).
Have you done the usual step of trashing FCP preferences on that machine? On that front, you might also want to check out Jon Chappell's excellent FCS Maintenance Pack ( http://www.digitalrebellion.com/fcs_maintenance.htm ) and FCS Maintenance Network Admin ( http://www.digitalrebellion.com/fcsm_netadmin.htm ).

Places Spinning Beach Ball

I am unable to assign a location to a picture. Places have been enabled in the preferences. When I select a picture and open the Info column, I start typing the name of a location (for example, the Bus Stop bar on Olive Way in Seattle), the spinning beach ball appears and never goes away after typing the first three letters. The "Google Results" are "Searching" but even after an hour, I must force-quit iPhoto.
This happens after rebuilding my iPhoto database or creating a new one and importing even one picture. I have updated to iPhoto 9.1. I am currently re-eavaluting iLife '11 on my computer at work, since my upgrade at home was unsuccessful. I thought perhaps it was the proxy servers at work, but the same thing happens if I use the Wi-Fi connected to a DSL we have for testing. I'm able to assign locations on my personal MacBook using iPhoto '08 and the same wireless network.
-Doug

Actually, there was no iPhoto preference file before the install. I re-imaged my Mac at work to start from scratch. iLife '08 (except for iDVD and Garage Band) was part of the original image of software, I installed all of iLife '11 and imported the 272 pictures that were currently on my SD card in my camera. Attempt to assign a place and all I get is a spinning beach ball. I can see the default places in the search column (Bubnovka, Bubnovo, Bubnovskyaya, Slobodka...) after typing "B" and "u" but after I type the "s" the list goes away and I get stuck with the spinning beach ball. I've repaired permissions, taken a picture with the built-in iSight and put that into iPhoto and all I get to type is three letters and it's frozen forever. The same thing happens no matter what I type into the search field. I get to type three letters and it's frozen. Have now repaired permissions and restarted and the issue remains.
-Doug

Spinning Beach Ball - Network Issue?

Similar Messages

Maybe you are looking for