Spinning beach ball since I upgraded Mac OS to 10.6.4
I upgraded the OS for my MAC to 10.6.4 and now I frequently get a spinning beach ball. I never had this problem with previous versions of OS.
I had been seeing increasing incidences of this. It was getting very annoying. FWIW, I'm using FF 6.0 and 10.6.8. This wasn't where FF was just taking time downloading. I'd get the spinning beach ball for 15-20 seconds BEFORE it started actually downloading, and frequently when I was already on a web page, and just scrolling down.
I tried disabling all plug-ins and extensions. No help.
Here's how I fixed it.
(1) Fix permissions and
(2) Completely remove and restore Firefox. Remove all FF preferences (trash user/Library/Firefox), the application, and re install the application.
Yes, be sure you preserve your bookmarks, ideally through Xmarks, and you'll have to redo all your passwords. Small price to pay.
After I did this, I had NO problems. Spinning beach balls are gone.
But I'd sure like to know why ...
Similar Messages
-
Frequent Spinning Beach Ball after SSD Upgrade
I have several original MacPro's (2.66GHz quad core) each with 10GB of memory and all running Mac OS X Leopard (10.5.8) - please no comments that I need to upgrade to Snow Leopard or Lion. I have replaced the original hard drive in two of them with a brand new 120GB solid state hard drive (cloning the information from the original hard drive to the SSD using Disk Utility) and all is well.
This morning, I repeated the same upgrade process on a 3rd MacPro. Since the upgrade, I am getting frequent spinning beach ball cursors sometimes when performing the most simplest of tasks:
1. Opening System Preferences
2. Clicking the Apple menu.
3. Opening an application.
4. Pressing Command-Shift-A to access the Applications folder.
I have ran Disk Utility and it finds nothing wrong. I thought it might be something to do with Spotlight indexing the drive so I let it completely index the drive. Still having frequent spinning beach ball cursors.
What am I missing? I have 7 MacPro's all bought at the same time, all configured exactly the same (hardware, software, everything!).
Please help!
TIA,
JonIn brief, there are threads with pros and cons of cloning the OS to an SSD vs clean install.
There is always the issue of what make/controller/firmware SSD you used.
Are all of them the very same? hard to do with all the changes going on and with OWC issuing firmware update for their controller firmware (SandForce 2200 series I think).
3G? 6G?
http://macperformanceguide.com/index_topics.html#SSD_OWC_6G
I think one reason for OS X is it may handle an SSD different (or not).
I used Dec 2010 Corsair 3Gs in my 1,1 model just fine: 2 x 40GB and 1 x 120GB with no issue for months.
What's different? the model and firmware of your latest SSD. And always a chance it is a dud. Or Disk Utility isn't always best for cloning, even with hdd it isn't and many use CCC or better perhaps SuperSuper.
So there are threads, trouble cloning an SSD, and the recommendations to just clean install and use Setup Assistant. And of course move your home media and data to standard type drive.
Something else worth considering:
SoftRAID 4.3 -
Spinning beach ball after hard drive upgrade
Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advanceDid you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Over the last few months my Mac has developed a worrying habit.
Within the first few minutes of starting it up (perhaps on average about 50% of the time) it will completely lock up. This may happen at the Log In screen (if I start up the Mac & then leave it for a while) or during normal use.
Often the first symptom is a very high pitched (but quiet) whining noise that seems to come from the loud speaker on the front of the Mac. The pointer may freeze at this point, or it may still be moveable for 5 or 10 seconds before it freezes. It sometimes turns into the spinning beach ball during this. Once locked up the only way I can restart the Mac is to hold down the power button on the front for a few seconds to completely reboot the machine.
Once the Mac has restarted, it usually behaves normally, almost always for the rest of the day. The initial lock up & resulting restart only normally seem to happen the first time I use the Mac that day.
The only peripherals attached to the Mac (apart from the display, keyboard & mouse) are an ADSL modem, a USB printer and a pair of Apple Pro speakers, and this setup hasn't changed since long before the problems started, so I'm confident that I can discount the peripherals causing problems. I doubt that unplugging the speakers, for example, would have any effect.
I've run Disc Utility, OnyX and DiscWarrior without anything major cropping up. My instincts (I've been troubleshooting Mac problems for 16 years) tell me that I have a fundamental hardware problem, possibly with one of the 4 RAM DIMMs installed.
The RAM configuration is shown in the attached screen grab.
I'm considering removing one DIMM, running with 1.5GB of RAM rather than 2GB for a while, and repeating with a different DIMM removed each time until I can hopefully isolate the dodgy DIMM.
Do people feel this is a sensible approach, or should I try something else first?
Many thanks.Sometimes visual inpection will show bulging tops/sides., my guess is if it is it's most likely in the PSU.
Possible cheap fix, You can convert an ATX PSU for use on a G4...
http://atxg4.com/mdd.html
http://atxg4.com/ -
my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Lightroom 3+ (Mac OSX) Spinning Beach Ball on Import only?
Hello --
When I first starting using Lightroom 3 on my 27" quad-core iMac, detection of an inserted memory card (Compact Flash or SDHC) was instantaneous. It's one of the things that really attracted me to Lightroom -- plug in, and go!
Sometime after around 3.2 or so, the spinning beach ball (http://en.wikipedia.org/wiki/Spinning_wait_cursor) started appearing for about 60 to 120 seconds every time I inserted a card. I first thought it might be the cheap $10 Compact Flash USB 2.0 reader I was using, so I invested in a firewire reader from Synchrotech, since it appears the Lexar one has disappeared off of the market. No change.
Here are some other facts:
- This happens every time I import with no exception.
- Once the spinning beach ball goes away, performance is as expected (very fast).
- The spinning beach ball almost never appears anywhere else in Lightroom.
- Outside of Lightroom, the finder recognizes the cards immediately after inserting, and I can get to the files and copy them without any issue.
- I have tried Sandisk and Lexar cards of a variety of speeds and sizes. No difference.
- The problem happens with catalogs that already have images and brand new catalogs (no difference in performance).
- My catalogs are stored on local disk, and the photo files are located on a fileshare over GB ethernet. This environment has been the same before and after I experienced the spinning beach ball during import.
- During the spinning beach ball, the network switch is "bored," so I have a pretty good idea that the Mac isn't trying to scour or index the fileshare.
- I have updated to the latest: the just-released Lightroom 3.4. No change.
- I have tried both the "automatically bring up the Import dialog on card insert" as well as the manual approach where I have to click on Import in the Library module. I have also tried going into the Import section and then inserting a card. All have the same effect -- a guaranteed beach ball when Lightroom figures out a card is there.
I hope someone else is experiencing this issue and can give me a tip or two to make it go away. Two minutes to wait for the system to do absolutely nothing every time I put in a card is ridiculous!
-- Justina lock file is created every time LR is opened. It stops the database being accessed by more than one application. Sometimes, due to an improper shut down of LR the lock file remains. As you have discovered, in this case, you cannot open LR until you delete the lock file.
-
Spinning beach ball waking up from sleep 10.5.5 upgrade
I recently upgraded from 10.5.0 to 10.5.5 on my Powerbook 1.25ghz and there is now a problem waking up from sleep. I get an infinite spinning beach ball that locks the system. This problem has only occurred since the upgrade. Please fix update!
Seems to be a problem with the hard drive. Ok prior to 10.5.2. Affected drive: Fujitsu MHV2100AT PL 100gb
-
Mail Plagued by Spinning Beach Ball of Death After 10.6 Upgrade...
Hello,
After the upgrade to Mac 10.6, Mail is plagued by the spinning beach ball of death. I did get the confirmation that the Mail database had been successfully rebuilt and the window looks fine for a few seconds before the program stalls. I have tried removing the Preferences and Envelope Index files before a restart without any change. Activity Monitor shows Mail eating up just shy of 100% CPU and the infamous "Not Responding" phrase.
Any clues from here?
More microchips than sense,
Dr. Z.See the following threads corresponding to Snow Leopard:
http://discussions.apple.com/thread.jspa?messageID=10064960�
http://discussions.apple.com/thread.jspa?messageID=10063772�
This was also an intermittent issue in Leopard:
http://discussions.apple.com/thread.jspa?messageID=9756242�
Deleting all Smart Groups in Address Book resolves the issue.
Feedback time:
http://www.apple.com/feedback/macosx.html
Interestingly enough, the Feedback page drop-down menu has not been updated with SL. =/
John -
Constant spinning beach balls after upgrading to Lion
I upgraded to Lion on a mid 2010 MacBook Pro. Ever since I have been dealing with constant spinning beach balls every time I log in to anything, type, browse on both Firefox and Safari, or scroll up and down a page. I have 8GB RAM, have reset the PRAM, restarted often, all is completely updated. Anyone else have this problem and what to do about it? It's extremely annoying and hard to get anything done! Thanks, karen
This is the info received from another post.
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Duplicate see [/questions/960928]
Im going insane with the spinning beachball on mac when using Firefox v21.
It happens several times per minute with something as simple as choosing the next field on a page or even scrolling down the page using the scroller on the right hand of the page.
Im on a laptop which has os 10.6.8 installed and the laptop has 8gig of ram and a 2.8ghz intel core 2 duo processor.
On previous versions of Firefox I used to get "unresponsive script" warnings with the option to stop it. These warnings would pop up and never give the option to "always stop an unresponsive script AND never take total control of my computer trying to get the script to respond"
There is no option to block the script on the site its coming from.
I did have a block script plug in but no sites work properly if java script isnt enabled.
With Firefox21 I dont get these pop up warnings any more.
I have a lot of tabs open and when the spinning beach ball happens too often I quit firefox and open it again. It remembers my tabs but doesnt load till I click on the tab.
Despite this Firefox will start stalling and showing the beachball spinning only after a few new pages are opened.
It is enfuriating and I dont consider the software to be working properly.
Im wondering has something gottten corrupted in the System Library when firefox installs or if there is a compatability problem with versions of Firefox, my OS10.6.8, Java, Flash?
I can only look at one tab at a time - I WOULD LOVE IF THERE WAS AN OPTION TO
"NOT GIVE ANY RESOURCES TO OTHER TABS WHICH ARENT BEING VIEWED"
I used to use a plug in called Pause All Tabs which was brilliant and gave me back control of my computer. I cant get it for FF21
So what can I do? Use Chrome instead?Locking as duplicate. Please see and continue with [/questions/960928]
-
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?
yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox. -
Someone with two macs pls help with spinning beach ball
Sometimes I download pictures to my MacBook from my camera and then transfer them to my main library on my G5 using photo sharing in iPhoto.
If "look for shared photos" is enabled on the MacBook and "share my photos" is enabled on the G5, I get a long hang and a spinning beach-ball in when I launch iPhoto on the MacBook The hang seems subsequently affects the G5. They both hang for a good 15-30 seconds.
While this is happening the Application Monitor shows a root process called "mds" using 99% of the MacBook CPU. Once the hang is over the mds process goes away. The G5 while still hanging simply shows iPhoto as not responding, no mds process.
I've wiped the MacBook clean, set up new accounts. Nothing seems to fix it. The question is; am I alone? Can someone else go through the steps and get iPhoto to launch with iPhoto already running on another networked mac with photo sharing enabled and not get a spinning beach-ball.
This was also a problem in iPhoto 06'. I was really hoping Apple got my feedback and fixed in 08' Maybe something is wrong with my MacBook.Hi.
mds is the indexing process, usually run by Spotlight when looking for files, folders, servers, etc.
that's the reason why you get the delay when seeking your images using the sharing function. Your mac is searching for the requested service (your photo sharing "server"...your other mac), and it cannot find it because of the firewall that's built in to the mac. Whether you're doing this via a wireless or an Ethernet connection, you'll need to assure that your firewalls on
both computers are open to allow that type of sharing to take place.
Take a look in your System Prefs, under the Sharing icon. Click on the "Firewall" button and, after authenticating with your password, scroll down and select the option for "iPhoto Bonjour Sharing". You'll need to do this on BOTH machines, as the port is used by each for communication.
That should solve the problem..
Cheers,
Charlie -
The LaCie is connected via DVI to thunderbolt adapter. It had been working, and then when I switched off the computer and restarted several days later, I see the signon screen flash quickly, followed by nothing, followed by the signon screen and spinning beach ball and it simply freezes. Any thoughts?
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Maybe you are looking for
-
How do I merge Apple ID accounts so i can verify iCloud on iPhone?
I recently go iCloud, but am unable to use it because: When I signed up in Apple Store year ago I used "imagaria". I then had to create one tied to my email "[email protected]". But now, when I try to verify my Apple account to use iCloud, it says: "
-
Upgraded my Macbook Pro tonight to 10.8.2....horrible move, internet connection is now a slow crawl. Was very fast before upgrade. IF no known fix how do I go back to 10.8.1?
-
When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?
-
Java.lang.NullPointerException Patch Policy Enforcement
Zenworks 11sp3 on Sles11sp3 x64 I changed following settings in the Patch Policy Enforcement configuration Page: Schedule from Default to Schedule Restric Duatation schedule type patch policy reboot behavior to enabled change description text When no
-
Hi , i am trying to transmit the voice signal and receive the voice signal, at the output i am getting the error. can anyone resolve this i tried with the sine wave its working for voice i am getting the error voice signal is .wav file Attachments: