Spinning beach ball when quitting Logic and loading projects

Hello,
Whenever I load a Logic project I get the spinning beach ball. After a while, the project is loaded and it all works, but it is taken way too long to load the plugins. I'm not even talking about big projects, and I have an SSD, so it should be much faster.
The same happens when I quit Logic. Not when I close the project, but when I actually quit Logic. The "Logic Pro" menu in the top left corner of the menu bar in OS X would light up in dark blue when I press CMD + Q, and it would stay like this for 30 seconds or so. The spinning beach ball would appear again during this time. Then it would finally quit.
I have reinstalled OS X and reinstalled Logic Pro X. But the problem was still there. It sounds like a core audio problem, but the problem occurs no matter what my sound output is set to. It happened when the audio output was set to the built-in speakers of my Mac Pro (yes Mac Pro have that!), when it was set to the speakers of the Cinema Display (LED one) and when it was set to my RME Babyface.
I don't think it's a Driver problem because it happened as well when I reinstalled OS X and Logic, and when I tested it on the Macs/Cinema Displays speakers, without the RME Babyface, basically without having installed any drivers or anything yet. So everything was fresh and untouched.
This is a very weird issue. I'm wondering if someone knows what I could do next.
My specs:
Mid 2010 Mac Pro 12-core 2,92 GHz
32 GB RAM
27" LED Cinema Display
OS X 10.9.5 Mavericks
Logic Pro 10.1.1
Thanks a lot

Hi,
thanks for your reply.
Like I said, this is a complete fresh install – I installed OS X Mavericks 10.9.5 from a USB installer, and re-downloaded Logic Pro X from the App Store. That's all. That means there's no 3rd party plugins, no 3rd party drivers, nothing, just the stock OS X system.
However, I just installed the RME Babyface drivers. But this makes no difference, as the problem was present before as well. I'm just saying that, because it appears in my EtreCheck Report which I will post an the end of this message, so you may be wondering.
I tried to delete the preference files and such before – no change.
Logic started normally (= no message or appeared or anything) while holding down Shift + Control, and also while holding down the Option key. The issue is still there. What would or what should it do if I hold these keys while starting? When I hold only the Control key however, it asked me if I wanted to start Logic without the Core Audio. I clicked to start without it, and then obviously everything worked.
So here's my EtreCheck report. Everything looks normal I'd say?
EtreCheck version: 2.1.8 (121)
Report generated 09. April 2015 16:30:01 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac Pro (Mid 2010)
    Mac Pro - model: MacPro5,1
    2 2.93 GHz 6-Core Intel Xeon CPU: 12-core
    32 GB RAM Upgradeable
        DIMM 1
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 2
            Empty
        DIMM 3
            Empty
        DIMM 4
            Empty
        DIMM 5
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 6
            Empty
        DIMM 7
            Empty
        DIMM 8
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en2: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 7950 - VRAM: 3072 MB
        LED Cinema Display 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 4:52:33
Disk Information: ℹ️
    HL-DT-ST DVD-RW GH61N
    HL-DT-ST DVD-RW GH61N
    Samsung SSD 850 PRO 512GB disk0 : (512,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh SSD (disk0s2) / : 511.25 GB (494.58 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    ST2000DM001-1ER164 disk1 : (2 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HDD (disk1s2) /Volumes/Macintosh HDD : 2.00 TB (2.00 TB free)
USB Information: ℹ️
    General UDisk
    Apple, Inc. Keyboard Hub
        Logitech Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. Apple LED Cinema Display
    Apple Inc. Display iSight
    Apple Inc. Display Audio
    RME Babyface (23483046)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    de.rme-audio.driver.RMEFirefaceUSB (2.05 - SDK 10.9) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
Launch Agents: ℹ️
    [running]    de.rme-audio.RMEfirefaceUSBAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         1%    WindowServer
         1%    Logic Pro X
         1%    coreaudiod
         1%    fontd
         1%    sysmond
Top Processes by Memory: ℹ️
    241 MB    Logic Pro X
    137 MB    mds_stores
    137 MB    Safari
    103 MB    com.apple.WebKit.WebContent
    103 MB    WindowServer
Virtual Memory Information: ℹ️
    29.92 GB    Free RAM
    2.07 GB    Active RAM
    573 MB    Inactive RAM
    1.77 GB    Wired RAM
    491 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 9, 2015, 11:37:27 AM    Self test - passed
EDIT:
Okay, apparently there *is* a little problem. This part here:
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
I believed this was normal because my audio output was set to the external USB audio interface when I ran the test, but I ran it again with the sound output set to the Cinema Display, and this message still appeared. When I click the Information symbol, it says:
These are low-level parts of your operating system, usually provided by Apple, that run in the background while a user is logged in. Any failure that appears here may indicate a problem with your system.
I can't tell if there's a link to my Logic problem, however.
PS: I just remembered that I installed a system update for the LED Cinema Display which I downloaded from the Apple Support page. Maybe it has to do with that. It may have been an old update that was not needed.

Similar Messages

Spinning beach ball when update vault and other activities

I tried to update my vault with some new pics, and it hangs in the same spot for hours.
I repaired the permissions. Same issue.
But when I go to repair the library, it spins and hangs again.
Anyone have ideas what to try next?

You have a corrupt preview or two i suspect. You can hopefully fix it my regenerating previews for your library - but depending on how many images you have it'll take a while.
If you click library, photos, select all photos.
Then in the photos menu you can select Update previews for library. And then wait a while.
Might be better to delete all previews first before you rebuild them. A quick way to do this is to, (back up first) navigate to your aperture library file, right click, show package contents and then delete the contents of the previews folder.
If you really want to go heavy duty on this you could clean out the thumbnails folder too.
Set the rebuild when you reopen aperture and if you've a lot of files go home and I'd let it work over night.
It's heavy but it should speed things up for you.
Hope this helps.
M.

Spinning Beach Ball when turning off Airport WiFi. SL Issues, many! Help!

I performed a clean installation of Snow Leopard on my new 13 inch late 2009 MBP on release date. All of a sudden, I am getting the infamous spinning beach ball when attempting to disable my Airport wifi. It's so bad, that I am not able to gracefully restart my system. Seriously this is getting out of hand. Snow Leopard was supposed to make Leopard even more stable.
Steps I have taken, not in any particular order.
Verified and repaired permissions.
Ran HW test, no issues found
Reset PRAM
Deleted wifi related plist files from /lib/prefs/sysconfig and rebooted;
The only thing I can think of next is to perform and Archive and Install or....
...As much as I would hate to go back, Install Leopard.
I would appreciate feedback or suggestions as what to do. Looks like 10.6.1 may be worth waiting for. Oh how I miss Tiger.

HI,
If you use an Airport Base Station or Airport Express, try resetting.
If that doesn't help...
Boot from the 10.6 disk and verify the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
If necessary, do an Archive an Install. It's the only install option available for Snow Leopard.
Carolyn

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

You can quit Preview by selecting it in Activity Monitor and then clicking on the red octagon 'Quit Process'. That does not solve the issue of the beach ball' as such. Perhaps. a reinstall of the OS might sole the problem. That is simply a guess on my part.
Ciao.

Spinning beach ball when changing length of midi region

I am get a spinning beach ball when trying to change the length (with mouse) of a midi region in the arrange window.
also when the beach ball stops spinning, the midi region hasn't changed its length at all.
Any ideas?
Thanks in advance
Marcel
G4 mirror door DP 1Ghz Mac OS X (10.3.9) Logic Pro 7 Kontakt 2

Do you have ProApps 3.1 installed?

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Spinning Beach Ball when trying to access Oct. and Nov.

I can't quite figure this one out. Every time I try to access Oct. or Nov. 2010 on my ical, I get a spinning beach ball that lasts for 20 minutes. I have tried erasing my ical and replacing it with my MobileMe data, but it still doesn't work. Any thoughts?

Your profile says you are running 10.5.5. Are you up to date at 10.5.8?
Try reseting your sync history: http://docs.info.apple.com/article.html?path=iSync/2.0/en/isc39.html
If the issue still persists follow this article: http://support.apple.com/kb/TS1627
If the issue STILL persists, export out each of your calendars one at a time using File > Export.
Add 1 new calendar to your iCal.
Import each calendar back in one at a time to a new calendar testing after each import to see if the issue persists.
Once all the calendars are re-imported you can delete the extra calendar.
Hope that helps

Got this Spinning Beach Ball when I swap app

this drives me nuts, and the fact that I do not understand why drives me even more nuts
when I am in FCPX everything works fine, it goes fast without lack, but if I shortly swap to another app and back, **** begins...
the Spinning Beach Ball spins like ****, and it takes about 50 seconds before it stops, and it do not matter what app it is, Preview, Safari or just the finder
I use a 8core 2,26GHz Macpro, ATI Radeon HD 5870 GPU, SSD HD with OS 10.7.2 and 32GM ram, the video is on a 14TB Raid, the same machine runs like a dream with FCP (and all other apps) and did ok with FCPX until the last couple of weeks, it feels like it need to read something over the network with to small bandwidth?
anyone?

Okay, this is a little strange.
Try the following:
Quit FCP X
Unmount drives
From your user library, drag the following preference files to your desktop:
User > Library > Preferences > com.apple.FinalCut.plist.
User > Library > Preferences > com.apple.FinalCut.LSShardFileList.plist.
Mount your drives
Launch FCPX. FCP X will recreate new preferences files
See how this goes. Maybe your pref files are corrupted.

Spinning Beach Ball when trying to install CC

Help, help, help me pleeeeeze? I have job to do before the end of the weekend... I'm getting desperate!
I got the dmg file and tried to use the Creative Cloud Installer to start my free trial, but double clicking on the installer icon only produces a DLOG that says "Initializing Installer" with an empty progress bar and "Retry" and "Cancel" buttons. Neither of which is available, as the cursor turns into a spinning beach ball immediately, and nothing happens.
I have shut down and rebooted; repaired permissions and verified the hard drive. Nothing is working. Here is my system (yes, I know I barely meet the minimum requirements):
OSX Version 10.9.1
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB52.0088.B05
SMC Version (system):          1.38f5
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0866
Revision ID:          0x00b1
ROM Revision:          3384
Displays:
ACER X233H:
Resolution:          1920 x 1080 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Firewall Settings:
Mode:          Allow all incoming connections
Firewall Logging:          Yes
Stealth Mode:          No
Any ideas? Thanks for your input in advance.
Mandolynda
Message was edited by: Mandolynda

Unfortunately, the fix didn't stick. When the CC app told me it needed an update last night, I downloaded the update (because it wouldn't let me run AI unless I did), opened the .dmg file. It opened the DLOG (Initiating) and then wham: spinning beach ball forever. I have already tried:
Activity Monitor & canceled the task
Repaired permissions
Restarted computer
Re-downloaded the CC app
--no good, same outcome
so, I...
Canceled the task in the Activity Monitor
Plugged in the ethernet and turned off the WIFI (which is what fixed it, finally, the FIRST time this happened
Shut down and restarted the computer
Ran the Cleaner program [http://www.adobe.com/support/contact/cscleanertool.html] (uninstalled *every* Adobe program on my computer)
Re-downloaded the CC app and attempted install
--no good, same outcome
Frustrated out of my mind at that point, I shut off the computer and walked away. I don't know how the hell I'm ever going to get any work done! I'm sure not convinced I should buy a subscription at this point. I think I'll have to let my trial expire and just do all my free-lance work at my daytime job! Adobe won't be making any more money from me that way.

Spinning beach ball when opening CS3

First I wasn't able to connect to any of my sites, now I'm
getting the "spinning beach ball of death" every time I open CS3.
It is completely unresponsive and I have to "force quit" to get out
of the application.

I have been having similar problems on my G4 and on my Intel
Macbook since the end of last week and the only changes to both
systems has been the QuickTime 7.6 upgrade for Leopard.
I have used the sampler in Activity Monitor to see what
Contribute is doing while the Beachball is showing and it is busily
doing nothing, waiting on a variety of events, spinnig its wheels.
As far as Flash Player is concerned, the last update goes
back to October and I have been using Contribute without any
problems since then (up until last Friday).
Any clues?
Pierre

Spinning Beach Ball When Trying To Capture

Upon trying to capture, using a new camcorder (Canon HV20), in the small black window where the capturing footage would appear, it is black, and in the caption area below it says
"Waiting for timecode.
Device must be in VTR when device control is enabled.
Press Esc to abort."
I pressed Esc and got the spinning beach ball. It's been spinning for 5 minutes or so. What do I do? Thanks.

Please give FULL information of your entire system, OS version, QT version, FCE version, computer, drives, how everything's connected, settings on the media and settings used in FCE.

Spinning Beach Ball When Clicking Different Points on Timeline

I'm sure this is a basic one, but can't find answers anywhere. I'm using FCP 4.5 HD on a new G5. Never had this issue before, but it randomly slows down to the spinning beach ball and white X in the viewer Canvas when I click on various points in my timeline.
I have over a gig free of memory, and my Activity Monitor shows it's all FCP when it slows to the spinning ball...
I'm under deadline and this is very time consuming. Any suggestions out there?
THANKS.

First - please click the reply button on the actual post you're replying to. It's hard to guess the relevance of your answer when you keep replying to yourself.
Please confirm the following:
Easy Setup Setting :
Timeline Setting :
(Ctrl+Zero)
Codec :
(Right or Ctrl-Click a clip in the browser and report what the 'Compressor' line states)
Sorry if you know all this - it just saves time if you don't.
I think it's possible this could be a corrupted render file so I suggest you trash your render files :
Tools > Render Manager
After trashing, render again if you need to, and see whether there's an improvement.
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Final cut Spinning Beach Ball when i press spacebar to playback the sequenc

Hello,
We have 5 machines with xsan, final cut and open directory. On one only machine, when i playback secuences appears the spinning beach ball for 5 seconds before playing. The When i restar that machine, the final cut playback correctly again, but if i'm working with Final for 1 hour or 2, this happens again. I uninstall the final cut and reinstall it, and this still happening.
does anybody any idea about it?
thank for your time.

Anything about that particular workstation that sets it apart form the others? Installed software, background processes, attached hardware/peripherals? Does the issue happen regardless of the account being used?
Have you run any diagnostics on that machine? All the basic system troubleshooting steps taken? Eg Repaired permissions, Rebuilt with Disk Warrior (commercial product).
Have you done the usual step of trashing FCP preferences on that machine? On that front, you might also want to check out Jon Chappell's excellent FCS Maintenance Pack ( http://www.digitalrebellion.com/fcs_maintenance.htm ) and FCS Maintenance Network Admin ( http://www.digitalrebellion.com/fcsm_netadmin.htm ).

Really long spinning beach balls when trying a video chat

I just migrated from an older Mac to a brand new Mac Pro 2.66. I plugged in my iSight and tried to do a video conference, only to get a spinning beach ball for >1 minute before the video chat commenced.
Later I tried to access my own camera (by clicking on the camera button at the top of my buddy list) and likewise, >1 minute of spinning beach ball, THEN it worked OK.
Going to the Preferences > Video tab, likewise, spinning beach ball.
Any ideas on how to diagnose and fix this?
Already repaired permissions, and tried unplugging/replugging the iSight.

Hi David,
In iChat > Preferences > Video section you should have a drop down to Pick the camera (either Internal or External).
Have you done this ?
By default iChat will use the Firewire one as first choice (to the extent of changing mid chat if connected.
2:52 PM Sunday; November 26, 2006

Spinning Beach ball when accessing screensaver

I am getting the continous spinning beach ball. Mine ocur whenever attempting to access any of the iphoto screensavers. The first set of screensavors that are colored green wt the picture of the ladybug. There are 14 of them, labeled Floating to Clasic. Does anyone have any ideas as to what the problem wt these maverick screensavers?

Wow, I'd forgotten that this thread was even open. Surprised to see responses. I forgot to subscribe to it, so I missed the recent discussions.
The link posted by dhkumd above has a post that talks about deleting some preference files via terminal. I haven't tried that yet, but it looks like I've found a similar solution (deleting a particular preference file) on my system for the time being:
I found this post on MacRumor's forums: http://forums.macrumors.com/showthread.php?t=541964
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Seems to have worked for me with short runs of screensaver enabled. I will have to see what happens overnight before I declare the problem solved. This seems a bit safer than using terminal to rm files. Dragging a copy to the desktop preserves a backup, using terminal to rm them does not.

Spinning beach ball when quitting Logic and loading projects

Similar Messages

Maybe you are looking for