SPL block when changing the Address manually at Sales order level

Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVR

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

Similar Messages

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How configure the credit limit at sales order level

Hi
how can i configure the credit limit at sales order level..
ex: when i create sales order ... if exceeds the sales order value to credit limit value ...sysyem does not accept to save this sales order ...is it possible...pls help me in this issue
regards
sesidhar

Hiiiii
It is very much possible in SAP
first you have to create credit control area
then assign your company code to your credit control area
then create your customer and assign credit control area in billing tab (for that u have to activate credit control area for your transaction by OB20)
Then go to t-code VOA8
assing credit check to your sales document type
create credit control area automatic with your credit control area.
Regards
Shambhu Sarkar

Field/Table to change the header tick in sales order billing plan

Hi SD Guru's
I am using a GUI screen to create standard sales order (VA01). Since my order dates at header and line item level can differ, i want the field name or table name of the header tick which is taken as default from my billing plan in my sales order.
Or is there any setting where my billing plan at item level is not defaulted from my header.
Its really urgent. Would appreciate your reply.
Regards
Ravi

Hi Ravi,
I'm unsure whether this will help you or not. In VOV7, choose your It Cat, in detailed screen of It Cat settings there's a checkbox with "Business data" when not checked which will allow you to change Data at Item level.
Regards
SD

Changing the Confirmed Quantity in Sales Order

Hi Gurus,
I have a requirement to change the confirmed quantity of the line item of the sales order. Is there any FM or BAPI that I can use? And how?
Thanks,
Andre

Hello,
I am having to deal with a similar issue.
The allocated quantity needs to be reset, so that the quantities can be allocated again according to the checking rule for product allocation.
This is probably not clear anymore, I am also totally confused now, so I'll add an example.
Example:
SCENARIO 1: Rejected item quantity not available to earlier order:
Assume product ABC is on a monthly allocation plan at a channel level
Available units = 100 units
Allocation plan = 50 units for Channel1, 50 units for Channel2
Assume all orders in this scenario are for one channel
1.     Order 1 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
RESULT: allocation of 40 units is consumed, available allocation = 10 units
2.     Order 2 is entered
Qty of 20     confirmed from ATP check, confirmed for 10 units from allocation check
Remaining 10 units unconfirmed
RESULT: allocation of 10 is consumed, available Allocation = 0 units
Unconfirmed order quantity = 10 units
3.     Order 1is rejected
line item for Qty 40 is rejected
RESULT: available allocation = 40 units
4.     Order 3 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
Allocation of 40 is consumed
RESULT: allocation of 40 is consumed, available allocation = 0
5.     Rescheduling is run for this product (order creation date determines priority in the queue)
EXPECTED RESULT:
Order 2 has highest priority and would be committed for 20 units, leaving 30 units for Order 3
Order 3 Commit quantity 30, unconfirmed quantity 10
Order 1 Line item was rejected, (no committed quantity)
RESULT:
Order 2 - Commit quantity 10, unconfirmed = 10 (as available allocation 0)
Order 3 - Commit quantity 40
Order 1 - Line item was rejected
So I need to reset the allocated quantities first...
Were you able to find a solution for this?

Changing the item categories of Sales order in web IC

Hi experts,
We are working on CRM 5.0 with Web IC
We have a scenario where we need to change the item categories of some of the items in sales order.
But in a standard sales order I cant see the item categories of line items in WebIC.
Now the issue are
1. How to make the item categories available in web ic?
2. Is there any standard config to do this or we have to go for development ?
3.Is it possible to change the itemcategories in Web IC?
Can any body suggest me with suitable solution
Points shall be rewarded for sure
Regards,
Madhu

Hi,
you dont change the item category at the header level. The item category will be changed at the item level and the code to do this is
lv_entity_items->set_property( EXPORTING iv_attr_name = 'ITM_TYPE' iv_value = lv_itemcat ).
here lv_entity_items is one of the entity in the collection for AdminI . lv_itemcat is the value you want your item category to be set to.
hope this helps.
Reward useful answers.
Regards,
S Sarma.

Change the Tax Code- In Sales Order i have Tax code for VAT

In Sales Order i have Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
Where the "P4" Tax code is picking in Sales Order.
How to change the Tax Code.
Urgent

Hi CHAKRI,
Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
Regards
Ram Pedarla

Fm to change the condition value in sales order pricing

Hi Friends,
I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
Can someone please help me. I've been stuck with this for quite sometime.
Thanks,
Dikshitha G

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

How to change the pricing rate of Sales Order after delivery is created?

Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders" after corresponding delivery is created ?
number of the Sales Order to be changed is huge. How can I handle this situation ?
immediate replies would be rewarded

Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

Change of partner analyse in sales orders

Hello,
I changed the partner analyse for sales orders and added a new mandatory partnerrole.
In new documents the partner analyse works fine, but in the existed sales documents I cant´t see, that a mandotory role is missing.
How can I see that this role is missing in the exsting documents???
Thanks for info
Nicole

You can create a custom report but there is no standard way to do this.
When a document is created in SAP, it is a "snapshot" of that configuration, master data, and information as it exists when the document is created. On the SD side there are a few things you can influence, for example, SAP contains some standard tools for mass updating of pricing information. Most of the document exists in its unchanged state though.
You *may* be able to use VA05 and do this (although I doubt it, no system in front of me right now). Other than that transaction or a custom report there really aren't a lot of options.
If you are familiar enough with the tables, you can do a "quick view" or an ABAP Query to get the info. However the SAP partner table is recursive so to avoid getting lots and lots of duplicates you will either have to add some code to a full query, or do offline manipulation of the data.
If you're looking for soild SAP experience to help through some of these hurdles, please contact me.
Bill Wood - President
R3Now Consulting
http://www.r3now.com SAP thought leadership!
Platinum SAP Solutions
(704) 905 - 5175
http://www.linkedin.com/in/billwood

Mass change of LOADING DATE on Sales orders

Hi
Does anyone know how we can MASS CHANGE the LOADING DATES on SALES ORDERS with MANY LINE ITEMS - ALL WITH Different DELIVERY DATES
So basically we are wanting to over-ride the loading dates which SAP suggests - which relates to the ROUTE
I am aware that you can use EDIT > Fast change > delivery date - but this would put all of the delivery dates then to be the same
Your help would be much appreciated, as the Operatives are doing this line by line, order by order at the moment
Many thanks
Tony

Dear Tony,
Won't You able to change the same Via LSMW (or through BDC-Program)?
Just check whether the T. Code: MASS, could be useful
Best Reagrds,
Amit

SPL Block when manually changing address detail form r3

I have a strange situation:
We have completed an upgrade to GTS 7.1 - SSLLEG SP 15
We are using R3 4.7 - PI 2004_1_470 SP 0015 PI_BASIS 2005_1_620 SP 0014
When we create a sales order with reference to another sales document - and manually change the address, the RFC sends the sales order inofrmation to GTS - and screens normally
When we create a sales order without reference - and manually change the address to a partner - the RFC sends teh sales order information to GTS - but the partner(s) changed are identified as blocked due to "Manual change - and found on boycott list"
When I SPL screen this on the GTS side - it proposes release - without considering the blocked partner(s). It does not appear on the blocked documents list - but when you display doc - it shows these partner(s) blocked
If I send this sales order over using the r3 push program (/SAPSLL/SD0A_DISTRIBUTE_R3) - the order screens properly
The configuration is set to SYNCHRONOUS SCREENING for the document item category
Any insight here would be helpful

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

Scripts for changing the address of the user when they have been in the box for 6 months

Scripts for changing the address of the user when they have been in the box for 6 months
If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old
Anyone have suggestions on how I can go about it?

What is this "box"? What is this "folder" you're asking about? You'll likely get a better answer if you use standard terminology.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

TS3899 How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

SPL block when changing the Address manually at Sales order level

Similar Messages

Maybe you are looking for