SPL document screening. Outcome of system/user checks

Could anyone explain the differece in the following four "outcome of system/user checks:
       SPL Check: OK (No SPL Entries Found)
1      SPL Check: Not OK (SPL Entries Found)
6      Status Check: OK (Not Blocked)
7      Status Check: Not OK (Blocked)
Thanks.

Hi Aditya,
The answers to your questions could depend on several factors, including how the initial screening of partners was performed and whether or not the SPL services blocks incoming documents or not.  The 'SPL Check" may be from using the simulation feature or it may be due to a lack of initial screening of a business partner.  As you can see there are plenty of variables involved.
So the best answer I can provide is the following:
Go to 'help.sap.com'  (leave off www).SAP Business Objects tab.
Select GRC solutions.
Select Global Trade Services.
Choose appropriate version, then select 'Application Help' in the desired language.
Use the search feature at top or the menu section at left to look up these processes and statuses.
This should help you some at least until someone else could perhaps provice a more specific answer to you here.
Cheers !
-Greg

Similar Messages

  • Payment Document Screening for SPL

    Hi Guys
    I am facing some issues in doing Synchronous payment document screening in GTS.
    1) Is there anyway to recheck financial documents - Same which we do for Logistics documents via /sapsll/cuhd_mr_spl
    2) Is synchronous checks possible? Like the Purchasing docments where system will let you know as soon as you create a PO.
    While i am checking the Log its showing unable to determine active Legal regulations, this is only being shown for Payment documents.
    The scenario here is we create proposals and instantly do a Payment run, so synchronous check is very essential for us.
    Thanks
    Carl

    Hello Carl,
    1) You can use /SAPSLL/SPL_BLRL_FI --> Manually Release Blocked Payments, which enables you to perform again SPL screening.
    2) Synchronous screening can be set in IMG --> Global Trade Services --> Compliance Management --> Sanctioned Party List Screening --> Activate Business Partner at Business Partner Function Level
    Here you can set MKK (contract partner)  or SLLBNK (Banks) for synchronous. Response form GTS you will seen in Proposal Log (F110 transaction in feeder).
    3) For activation of Legal regulation check whether your legal regulation is active for your relevant country.
    Cheers,
    Gabriel.

  • Update form Marketing Document screens from one user to other

    I know there is a query somewhere where I can set up all Marketing Document screens for a user then copy it to other users so their Marketing documents have the same look and I don't have to go through each user.
    Does anybody has that query? Thanks

    Hi Rosi
    A query would imply some sort of direct write to SAP tables and that is not wise. You could rather have a look at the DI API or DTW templates for updating user defaults. If I recall correctly it is called UserMenuService.
    Kind regards
    Peter Juby

  • Error: unable to connect to database using user system. please check privil

    Hi All,
    i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
    dblogin userid system, password tiger.
    Error: unable to connect to database using user system. please check privil
    Can you please help me to connect RR database also in GGSCI promt.
    Thanks
    Raja

    Did you try with RR database tns name or sid while connecting ?
    If No then try this ,
    GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
    Password:
    Successfully logged into database.
    HTP
    Annamalai.

  • HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    Are you using the charger and cable that came with the phone?
    Are you using an unauthorized third party charger?

  • How to get System status Check Boxes into Query selection screen

    Dear experts,
    Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
    Regards
    Jogeswara Rao
    Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

    Problem solved through other Forum
    (Checkboxes not possible, some alternative solution to my requirement found)

  • User Check errors

    Hi Experts,
    We added users in Org Structure using users_gen with appropriate Org Node. whose validity start in future (02nd Jan 2009).  When we run the following error messages are coming for all the users.
    User not integrated into Orgnizational Structure
    Attribute check for xxxxxxxx is failed
    System Error: the object US xxxxxxxx has no relationships.
    Please guide me.
    Thanks in advance

    Hi,
    Could you have to send a Print Screen of this ERROR?
    Check if you have relationship of this user in transaction BP.
    Did you create User in SU01 and uses the trasaction USERS_GEN to associate the user to a structure orgaizacional, correct?
    Regards,
    Pedro Marques

  • SPL document numbers for per ledger

    HI Gurus,
    For special purpose ledger I want to assign number ranges per ledger. i.e. number ranges should be different for each ledger or I want to have a SPL document number percompany code. I have around 90 company codes opearting in my system.
    Please help me with suitrable user exit.
    Thank You!!!

    hi
    you can create your number range group and assign each one with different numbers as required by you.

  • System should check chepter id  when i am creating the excise invoice.

    dear sir.
    when  i am creating the excise invoice in J1IIN , system should check chapter ID is maintained are not for the material in J1ID.
    if chapter id is not maintained in J1ID for the material, system should give error or warning message when i am creating the excise invoice in J1IIN.
    Please help me out this issue.
    regards
    jrp

    In fact, when you are creating billing document, system will give a warning message that chapter id is not maintained for that material and the duty values will be zero in billing document.
    As I dont have access to SAP, not sure on the warning message number.  Try for a material without maintaining the chapter id in J1ID, note down the warning message number and convert it into an error message if possible.
    Alternatively, you can try with the user exit J_1I7_USEREXIT_EXCISE_BEF_SAVE to meet your requirement.
    thanks
    G. Lakshmipathi

  • Prompting logon screen in remote system..

    Hi All,
    I have developed a RFC function module in B system and when i call this RFC function module from A system (for displaying a ALV report with the data fetched from B system), to my surprise it is prompting the logon screen of B system for entering the details, when we enter the logon details and press enter, then automatically it is taking us back to A system and displaying the report.
    Now the problem is can we get the data from B system and display the report in A with out prompting the logon screen of B system.
    Thank you in advance.
    Regards,
    Venu Gudala.

    Hi,
    Go to SM59 transaction and enter the RFC destination of system B
    and then go to the second tab i.e. logon/security and then enter the client, user and password details and then save it.
    then check if its working fine....
    Regards,
    Siddarth

  • IH01 default screen variant for all users

    Hi,
       I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
    Ajay

    hi
    if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
    only thing is don't authorize the user to create the variant
    from SAP help:
    Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
    If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
    Maintenance of selection variants
    When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
    regards
    thyagarajan

  • Getting error "Document is locked by other user, please try again later"

    Hi Sap gurus,
    We have one invoice which is in approver's list. The approver is not able to neither approve this nor reject this invoice, the error message he gets is "Document is locked by other user, please try again lateru201D.  We have checked SM12 and we could not find ant lock on this object for the user.
    We have tried few function modules indicated below to unlock the work item, to change the status, to complete the work item, to forwarding this work item by another user and finally even to delete the work item.
    SAP_WAPI_SET_WORKITEM_STATUS
    SAP_WAPI_WORKITEM_DELETE
    SAP_WAPI_UNLOCK_WORKITEM
    SAP_WAPI_WORKITEM_COMPLETE
    SAP_WAPI_FORWARD_WORKITEM
    We have also tried deleting this invoice from the system, but still we get the same error. Can any body please help us providing the any other function modules by which we can unlock an invoice or to delete the invoice from the SRM system.

    Hi,
    Please review note 1277002 Wrong error message "Document is locked..." for Invoice. And also note 1178295 BBPAPPROVAL: Document gets locked by the User.
    These notes should resolve this issue.
    Kind Regards,
    Lisa

  • IT 0105 subtype 0001. Assign one System user to more than one person?

    Hello, Gurus!
    We are maitaining Hr master data (infotype 0105 - Communication, subtype 0001 - System User name). We have two person: person A and person B. Person A have communication with system user C. When we communicate person B with same system user C, we gettin error:
    "ID/number already used for person A".
    The time constraint is set to 3 (Record may include gaps, can exist more than once"
    Is it possible to assign one system user more than one person?
    This condition is checked by FM CHECK_USRID. We assume, what the result of this checking can be changed from "Error" to "Alert", if we will change one record in table T77S0:
    Current value:
    GRPID=MAIL
    SEMID=SAPSY
    GSVAL=0001
    Table record after modification:
    GRPID=MAIL
    SEMID=SAPSY
    GSVAL=0002 (or any digital value, which is iffer from "0001"
    Should we expect negative consequences of similar modification?
    Please, advice.

    Thanks for explanation.
    But there is a little moment, that I can not understand ((
    We check PAI module of CHECK_USRID (include MP010530, screen 2000) and find folowing fragment of ABAP code:
      CALL FUNCTION 'RH_GET_HR_USER_SUBTY'                       "YRAK040203
           EXPORTING                                                     "YRAK040203
                 mandt                 = sy-mandt                     "YRAK040203
            IMPORTING                                                     "YRAK040203
                 hr_subty              = hr_subty                         "YRAK040203
            EXCEPTIONS                                                    "YRAK040203
               SUBTYPE_NOT_AVAILABLE = 1                                "YRAK040203
                 OTHERS                = 0.                               "YRAK040203
        IF p0105-usrty = hr_subty.                                        "YRAK040203
        MESSAGE E900 WITH  PA0105-PERNR.                           "YRAk028906
          MESSAGE e900 WITH object_found double.                     "YRABEWERBER
        ELSE.                                                                  "YRAK040203
        message W900 with pa0105-pernr.                                 "YRAK040203
          MESSAGE w900 WITH object_found double.                     "YRABEWERBER
        ENDIF.                                                                 "YRAK040203
    where p0105-usrty=0001 and hr_subty is equivalent field GSVAL=0001 in table T77S0. In other terms, when we are
    maitain subtype 0001, the first condition (marked bold) is always executed.
    For what the "else" condition is used, if it never be executed? If we will change value GSVAL from 0001 to 0002, theoretically, we will get "warning" instead "error", because p0105-usrty = hr_subty=false and code MESSAGE w900 WITH object_found double will be executed.
    Any ideas?
    Regards.

  • Lock sys and system user

    Dear all,
    We have 10.2.0.4 on solaris 10.
    Currently we had I.T audit on our environment and auditor commented to lock sys and system user and use one user with any name (not oracle generic name) and grant him sys and system privilege and to use this user for admin purposes. is this right ?.. is this recommended ?
    Please advise

    Hello,
    I think it's not a right way to lock SYS.
    More over, if you connect as OS Administrator (root for Unix/linux) on the server and use
    OS Authentification then, you can connect on SYS AS SYSDBA anyway.
    So, in fact, it's not possible to lock out SYS even if you execute the following:
    ALTER USER SYS ACCOUNT LOCK;If you want to prevent access on SYS you should set a complex and long password and
    apply the same rule for the Administrator / root OS user.
    These passwords must be known by very few and well - identified people and written nowhere
    (in any files or scripts).
    More over, you should limit DBA roles to SYS and SYSTEM and remove this powerful Role
    from other Oracle Users.
    Then, you may enable session AUDIT so as to control the connexion on the database and,
    create a LOGON TRIGGER so as to check the login, workstation, program of the end users
    who connect to the database.
    On 10g, EM DBConsole shows an alert everytime a User is connected with SYS.
    Please, find enclosed, an interesting document written by Pete Finigan on this topic:
    http://www.insight.co.uk/files/presentations/Hacking%20and%20securing%20Oracle.pdf
    Hope this help.
    Best regards,
    Jean-Valentin

  • TAKEOWN command -- SYSTEM user cannot claim ownership

    Hello,
    I already tried to ask this question over at microsoft answers, but I was forwarded here. ( https://answers.microsoft.com/en-us/windows/forum/windows8_1-security/takeown-system-user-cannot-claim-ownership/42499b15-6939-4c2b-811c-04449dd2a8b2 )
    I've got a question about a matter of principle due to learning, not a particular problem. 
    When one want to take over ownership of files and directories owned by NT SERVICE\TrustedInstaller, one can very easily use the security tab of the properties. Also TAKEOWN and ICACLS works on an elevated cmd.
    However, TAKEOWN does not work for particular situations when you are system user.
    Here is my situation:
    For learning purposes I want to add (full) permissions to "C:\Program Files\WindowsApps" to my user account with administrator privileges ("VankogSolid\Daniel").
    To this folder only TrustedInstaller has full access. While System user has RWX to this sole folder and machine administrators have R-X rights for the whole folder. My own account has no explicit appearance:
    (cannot post pictures, therefore do it yourself:)
    http://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=3abf52bb-8ef9-46aa-8dcc-07a26d778680
    side question: 
    Even though my user has admin privileges it has no privileges at all for this folder. Accessing it is denied by the system. 
    Yes, my user is not listed in the permission entries, but shouldn't it be part of "Administrators" and therefore be able to read it?
    OK, so to add my account to the permissions list I need to get ownership of the folder first and then set the permissions.
    Doing this via GUI and on an elevated cmd via TAKEOWN with ICACLS works on my account.
    But now the problem:
    Why does TAKEOWN not work as SYSTEM user?
    Here is what I mean: 
    Because I am curious and I think it might be of better security concern (debatable), I wanted to set the owner of the folder to SYSTEM and let SYSTEM set my account permissions.
    So I opened a cmd as SYSTEM user while in the context of my windows logon screen and tried TAKEOWN:
    c:\Windows\System32>whoami
    nt authority\system
    c:\Windows\System32>takeown /F "%Programfiles%\WindowsApps"
    ERROR: The current logged on user does not have ownership privileges on
           the file (or folder) "C:\Program Files\WindowsApps".
    Main question:
    OK, what's going on here? Why is he unable to claim ownership as SYSTEM? He has RWX, while even administrators only have R-X.
    Thx for your explainings!

    Comments embedded
    Hi ,
    I’m facing problem with oracle user,
    Oracle 10G R(2).Windows Xp
    Application in .NET
    1)I create user:Please post complete command
    >
    2)Then I check current session using this select”
    "SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
    Please post the complete command.
    3)Then I execute this statement from application”
    ALTER SYSTEM KILL SESSION '{sid},{serialno}'
    IMMEDIATE”
    Please post the complete command
    4)In our scenario user is no more connected. How did you verify? Please post the complete command.
    >
    5) Now when we run below this statement from
    application oracle gives an error”CANNOT DROP THE
    USER THAT IS CURRENTLY CONNECTED” So the user is still connected.
    Which user are you trying to drop? Yourself?
    Again, please post the complete command.
    >
    DROP USER {0} CASCADE
    Please advice.
    Faheem LatifMy advice is you either provide sufficient detail, including all commands, and stop relying on crystal balls and fortunetellers.
    No one here was looking over your shoulder, so no one can tell what happened, without you providing sufficient clues. I agree with you this is cumbersome, and doesn't comply with your custom to dump everything here, not doing any research yourself.
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for