Splash Screen Landscape

Does anyone know how to fix the splash screen issue of the splash screen quickly shifting to the right and then back in place ?
I thought this would be fixed in 3.3

Can you provide details about the following :
1) The device you are using
2) Images you are packaging
3) If your app is full-screen or not
4) The launch orientation i.e. Portrait or Landscape

Similar Messages

IPad splash screen/launch behavior broken in landscape mode for AIR 3.6?

I just updated to Air 3.6 (under FB 4.6) and I'm now seeing an issue with my app launching in landscape mode when the home button is on the left.
This is on my iPad 2 (running iOS 6.0). However, it doesn't happen on my iPad3 (running iOS5.1).
Launching my app under Air 3.6 on my iPad2 with the home button on the left the following sequence happens :
- The splash screen will appear properly.
- As the splash screen is going away, the app will rotate upside down and remain upside down after finishing launching.
- I must rotate the iPad 180 degrees and then back again to get it to recognize the correct orientation.
I have some other apps that use the same project as a template and share the same launch code. An app that I have that was compiled under Air 3.4 does not exhibit this problem at all on the exact same iPad. The launch sequence works seemlessly.
I have some other apps that were compiled under Air 3.2 on the same iPad that exhibit the following behavior, which isn't as severe :
- The splash screen will appear properly.
- The splash screen for a brief moment flips upside down.
- The splash screen then rights itself and the app launches the right way up as it should.
So it appears that something has changed in the way the AIR 3.6 is handling splash screens and the launching of an app.
I'm not sure if this could be related to the issue that was posted here (although it was indicated for iPod/iPhone) :
http://forums.adobe.com/message/5194883#5194883

Thanks Zero7Eleven!
Going into FB->Project Properties->ActionScript Compiler and adding -swf-version=19 to the "Additional compiler agruments" section seems to have fixed the issue for me.
It looks like this compiler agrument was mentioned in the release notes here, which I didn't find ealier :
http://helpx.adobe.com/flash-player/release-note/fp_116_air_36_release_notes.html

Landscape Splash screen iOS

Hi,
I have included the file '[email protected]' (960w x 640h) when exporting from flash cs5.5
My app is in landscape, but the splash screen shows in portrait, and stretched on my ipod4.
How can i correct this?
Also, is it possible to specify how long the splash screen is shown, but at the same time have the app loading in the background running code?
With GPU rendering I addChildren to the display list while its hidden by a black square at first. This allows smoother use of the images when i finally do show them.
I would like to add Children to the display list while the splash screen is still showing.
Thanks

The default pngs are always portrait, either 320x480 or 640x960. You can use them for landscape apps, just take your landscape design and turn it on its side.
I believe the splash screen will go away as soon as it can. You could have the same image in your swf, and have it sat there while the preloading is going on.

(Landscape) Splash screen on mobile not sizing properly when device is held in Portrait

I have a mobile project (AIR) for iPad and iPhone that has landscape splash screens when the user taps the icon. However, when the user is holding the device in portrait mode, the splash screen image opens and resizes a landscape image to show in portrait mode. It really looks bad too! I have only provided landscape images. Do anyone know what is happening here?

Does your app support portrait? If so, you should be providing the necessary portrait icons.
If not, you should be restricting your apps orientation. An event is fired off upon orientation change giving you a chance to control it:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/events/StageOrien tationEvent.html
In my landscape-only apps it's specified in the app XML and then I simply listen for changes. e.g.
// listen for orientation change
stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, _orientationChangeHandler);
// neglect any orientation change that isn't landscape
function _orientationChangeHandler(e:StageOrientationEvent):void
if (e.afterOrientation == StageOrientation.DEFAULT || e.afterOrientation == StageOrientation.UPSIDE_DOWN)
e.preventDefault();
Although this may not even be necessary anymore, the XML should really allow orientation specification limits just like device limits. That code allows the user to use landscape or landscape upside down (Apple requires this) and neglects portrait or portrait upside down.

Only portrait splash screen (no landscape) for app

Is it possible for a DPS app created in App Builder to only have a portrait splash screen?
As in, our company does not want a landscape splash screen embedded.
Portrait splash screen could be rotated; however, this would add unnecessary size to the footprint of the download.

For my portrait-only apps I always create both splash screens, using rotated portrait as landscape.
The overhead on the app size is minimal, and not worth worrying about.

AIR 3.9 as3 IOS app stuck on launch / loading / splash screen

When deploying an app to ipad2 ios7/iphone4 ios6/iphone5 ios7 the app doesnt get past the loading/splash screen.
Ive tried debugging on the device via usb but doesnt even hit the first breakpoint on the firtst line of code. Also deployed via testflight with the same result ie stuck on the loading screen.
I released the app in December but the app freezes on the loading screen from the app store!!?? Ive no idea how this passed apple testing etc and it previosly worked. ..Has anyone got any advice on how to debug this or does anyone know what could be the problem?
Ive now created a VERY simple app for testing, this includes all icons etc and just displays some text in a text box. This also freezes on the loading screen.
Im using Flashbuilder 4.7 with air 3.9
Ive updated compiler arg with -swf-version=22
application descriptor updated with - <application xmlns="http://ns.adobe.com/air/application/3.9">
included icons are -
<icon>
<image16x16>16x16.png</image16x16>
<image29x29>29x29.png</image29x29>
<image32x32>32x32.png</image32x32>
<image36x36>36x36.png</image36x36>
<image40x40>40x40.png</image40x40>
<image48x48>48x48.png</image48x48>
<image50x50>50x50.png</image50x50>
<image57x57>57x57.png</image57x57>
<image58x58>58x58.png</image58x58>
<image72x72>72x72.png</image72x72>
<image76x76>76x76.png</image76x76>
<image80x80>80x80.png</image80x80>
<image96x96>96x96.png</image96x96>
<image100x100>100x100.png</image100x100>
<image114x114>114x114.png</image114x114>
<image120x120>120x120.png</image120x120>
<image128x128>128x128.png</image128x128>
<image144x144>144x144.png</image144x144>
<image152x152>152x152.png</image152x152>
<image512x512>512x512.png</image512x512>
<image732x412>732x412.png</image732x412>
<image1024x1024>1024x1024.png</image1024x1024>
</icon>
included launch images are -
Default.png
320 x 480
iPhone, standard resolution
[email protected]
640 x 960
iPhone, high resolution
[email protected]
640 x 1136
iPhone, high resolution, 16:9 aspect ratio
Default-Portrait.png
768 x 1004 (AIR 3.3 and earlier)
768 x 1024 (AIR 3.4 and higher)
iPad, portrait orientation
[email protected]
1536 x 2008 (AIR 3.3 and earlier)
1536 x 2048 (AIR 3.4 and higher)
iPad, high resolution, portrait orientation
Default-PortraitUpsideDown.png
768 x 1004 (AIR 3.3 and earlier)768 x 1024 (AIR 3.4 and higher)
iPad, upside down portrait orientation
[email protected]
1536 x 2008 (AIR 3.3 and earlier)1536 x 2048 (AIR 3.4 and higher)
iPad, high resolution, upside down portrait orientation
Default-Landscape.png
1024 x 768
iPad, left landscape orientation
[email protected]
2048 x 1536
iPad, high resolution, left landscape orientation

I have the same problem, AIR 4 (1628) and compiler -swf-version=23; testing on iPad3, iOS 7.0.6
The app launches less than half of the time successfully.
Mar 5 11:46:09 backboardd[29] <Warning>: CoreAnimation: timed out fence 2a207
Mar 5 11:46:09 backboardd[29] <Warning>: CoreAnimation: timed out fence 2a0df
Mar 5 11:46:09 SpringBoard[33] <Warning>: CoreAnimation: failed to receive fence reply: 10004003
Mar 5 11:46:09 backboardd[29] <Warning>: CoreAnimation: updates deferred for too long
Mar 5 11:46:13 backboardd[29] <Warning>: <app ID replaced> failed to resume in time
Mar 5 11:46:13 backboardd[29] <Warning>: Forcing crash report of <app ID replaced>[136]...
Mar 5 11:46:14 backboardd[29] <Warning>: Finished crash reporting.
It might have something to do with the new way iOS7 shows the last active screen of an app as a screenshot and optionally replaces it with the running app, if the app had been killed in the background. That way, it seems that more apps are running concurrently than the device supports. There's often a flicker showing the real app behind the splash screen WHEN I minimize a stuck splash screen.

Splash Screen Embed issue

hi
building app using Flex 4.6 with AIR 3.2 for iOS, i came across an issue with the Splash Screen on main application that on applying it and push the first view which loads an external swf having *Embedded images , the access Class for these Embedded images comes with an Error Type #1007 but on removing (do not apply) the Splash Screen from main application , the same code for Embedded Class runs fine.
am not understanding the connection between External Swf Embedded images and the splash screen. any help regaring the issue would be highly appreciated.
For reference:
Embedded Code in external swf file as follow:-
package
    import flash.display.Sprite;
import flashx.textLayout.compose.ISWFContext;
public class Slide1 extends Sprite implements ISWFContext
        [Embed("slide1/sldBg1.png", mimeType="image/png")]--------- the *Embedded image
        public static const bg:Class;
        [Embed("slide1/9_SmileyFace8.png", mimeType="image/png")] -------- the *Embedded image
        public static const pic96:Class;
        [Embed("slide1/slide1.xml", mimeType="application/octet-stream")]
        public static const slide:Class;
        public function callInContext(fn:Function, thisArg:Object, argsArray:Array, returns:Boolean=true):*{
             if (returns)
                     return fn.apply(thisArg, argsArray);
             fn.apply(thisArg, argsArray);
App xml:

        <visible>true</visible>
<aspectRatio>landscape</aspectRatio>
<autoOrients>true</autoOrients>
<fullScreen>true</fullScreen>
<renderMode>auto</renderMode>
<softKeyboardBehavior>pan</softKeyboardBehavior>
thanks in advance.

I absolutely position my other elements based on the location of the logo and the size of the logo and elements. I don't use any stackpanels or grids at all. I just use Canvas.LeftProperty and Canvas.RightProperty.
void PositionImage()
this.MySplashImage.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left);
this.MySplashImage.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top);
this.MySplashImage.Height = MySplashScreen.ImageLocation.Height;
this.MySplashImage.Width = MySplashScreen.ImageLocation.Width;
this.MyProgressRing.Height = MySplashScreen.ImageLocation.Height / 6;
this.MyProgressRing.Width = MyProgressRing.Height;
this.MyProgressRing.SetValue(Canvas.LeftProperty, MySplashScreen.ImageLocation.Left + (MySplashScreen.ImageLocation.Width / 2));
this.MyProgressRing.SetValue(Canvas.TopProperty, MySplashScreen.ImageLocation.Top + MySplashScreen.ImageLocation.Height - (.26 * MySplashScreen.ImageLocation.Height));
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Phonegap and squashed android splash screen

Hi all,
is there a way to get a splash screen to show correctly on most devides (phones, tablets...).
I tried to use a 320x480 png file but I get horrible results: the splash image is brutally stretched while loaded on a tablet (landscape).
Is there a way to set multiple images as splash screen and let the app pick the right one based on screen resolution/orientation?
I also tried to use a 9-patch image but it seems phonegap ignore it.
TIA
tony

Take a look at the config.xml documentation on the PhoneGap Build site: https://build.phonegap.com/docs/config-xml.
PhoneGap supports ldpi, mdpi, and hdpi splash screens for Android with the following config options:
<gap:splash src="splash/android/ldpi.png" gap:platform="android" gap:density="ldpi" />
<gap:splash src="splash/android/mdpi.png" gap:platform="android" gap:density="mdpi" />
<gap:splash src="splash/android/hdpi.png" gap:platform="android" gap:density="hdpi" />
For details of the different screen resolutions supported by Android, see http://developer.android.com/guide/practices/screens_support.html.

Splash Screen 1024x768 versus 1024x748

Dear developers....I am making an Ipad app. When I used the 1024x748 dimensions (as apple states for the splash screen image) for the Default-Landscape file, the screen shifts twice vertically. Adobe suggests using the 1024x768 dimensions......this works perfectly.....will apple accept this size for the splash screen image...or will the app be rejected? Thank you,
Justin

Thanks Colin....1024x768 works wonderfully thus far....no luck with 1024x748 (kept shifting...actually shifted twice before the launch of the app (ad hoc)). I will do the same for the retina display (2048x1536).
This is the first app I will be publishing to the app store/google play and it really is an exciting phase to see something come to life after almost 18 months of effort (part time only).
Justin

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Want to hide or mod FCP 6 Splash Screen

Just want to hide the splash screen on my FCP system. I rent it to indy projects and I want to protect my serial. How can I access the Splash Screen Image? I've been able to mod the splash screen on all the other apps on the rental system but can not find or get to the Splash Screen for Color and FCP 6. I know that a real hacker can find my serial some how but I am not trying to block those geniuses. Just the lazy ones that are willing to go as far as copying or screen grabbing my Splash Screen and or About Screens to get a working serial. I know how to mod the Splash Screen to hide my serial and how to hide the app so the user can't get to the splash screen. I just don't know where the splash screen file is. I've read that it is in the .nib files? I just wanna hide my serial. Don't care if I mod it myself or install an app that does it for me. Any apple people or anyone else know what I can do to protect my product. I've also been told that the splash screen does not display the full serial but it soo totally does. Hey apple, please add the ability to hide this splash screen. Perhaps with it's own password to unlock and show again? OR, make splash screen hiding a universal ability in the OS. That would be sweet! Anyway,... ideas?

Hey all. I have been able to mod the splash screen on all the apps in FCP Studio 2 except for FCP and Color. The other studio apps Splash Screens access a .psd file. The only files I've found in Color that seem like they might be the splash screen files are ft_splash.Isi, ft_splashEDU.Isi, ft_splashNFR.Isi and ft_splashVOL.Isi
How do I open a .Isi file? If I can figure that out I can hide the serial number for Color but it still leaves FCP. Why do apps show the serial on the splash screen at all? What purpose does this serve?

Switched computer cases and now I hang at the MSI splash screen.

Hey guys. I've never had any problems with building my PC until yesterday on the simplest of tasks.
I decided to buy a new case and switch everything over but when I did it decided to hang on the MSI motherboard splash screen.
Specs:
* MEM 4Gx2|G.SKILL F3-12800CL9D-8GBXL + one more stick.
* Processor = AMD Phenom II X6 1055T Thuban 2.8GHz Socket AM3 125W Six-Core Desktop Processor HDT55TFBGRBOX
* Graphics Card = HD 7950
* Motherboard = MB MSI| 880GM-E41 880G R
* PSU = CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
* OS = Windows 7 64Bit
* No overclocking.
So far I've done the following.
* Removed battery/Jumped the bios.
* Checked and rechecked each RAM stick.
* Removed all connections.
* Removed graphics card etc.
Any help would be greatly appreciated, Christmas has kind of killed my budget for a new build.
Thanks!
These are as far as I can get before everything stops working.

Really strange.
Have you made sure that there was will be/was no contact between mobo and case (apart from spots where the contact should be made) ? This could've break the motherboard.
Check ALL of the power supply cable connections between it and mobo.
Now something weird which doesn't seen to make any sense... Try to put your motherboard back to the old case.
That's all my suggestions, apart from that, if you're still able, then get it on a warranty and RMA it.
Good luck.

Tecra M3 - Stuck at Toshiba BIOS Splash Screen

Not sure what to do here with this one...
Bit of history... we bought my niece a used laptop for surfing/movies which worked fine when I had it a few weeks setting it up and such, she had it a week and it's now dead. Some days it works, some days won't even turn on. So, after much work determined it to be a motherboard issue, and since it was a $200 DELL, we optedto buy another laptop.
I grabbed a used Tecra M3, been playing with it all week, games, surfing, you name it, seemed a gtood solid performer. I give it to her, she goes upstairs, plugs it in, powers on and just sits at the splash screen.
Two nephews have no issues with theirs, wondering if possible the power outlet surging and killing the systems? She's 16, so (hopefully) knows how to handle a laptop carefully.
Regardless... can't afford another dead laptop. Stuck at startup BIOS splash screen, won't go beyond that. Won't let me into the BIOS, and if I hit too many keeps too many times, laptop just beeps per keystroke.
Any advice?
Solved!
Go to Solution.

Well, not much of a support forum... 2nd posting and neither issue I had had any responses at all.
In case someone see's this because having the same issue, the hard drive was very loose, barely making contact and fell off when I touched it. Pushed it all the way back in and works fine. Pegs on the panel designed to prevent the drive from becomming lose, not very good, still allowed the drive enough wiggle room to shake loose.

Splash screen for a desktop app (non mobile app)

I'm using fb4linux, 4.5.1A SDK, I'm developing a non-mobile (i.e. desktop application) and I would like to add a splash screen to it.
I've added mobilecomponents.swc to the library path, and the application starts like this:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
   xmlns:s="library://ns.adobe.com/flex/spark"
   xmlns:mx="library://ns.adobe.com/flex/mx"
   width="400" height="400" xmlns:local="*"
   preloader="spark.preloaders.SplashScreen"
   splashScreenImage="@Embed('assets/splashscreen.png')"
   splashScreenMinimumDisplayTime="1500">
When I debug it, no splash scren is shown and I get the following error:
ReferenceError: Error #1065: Variable flash.display::StageAspectRatio is not defined.
    at spark.preloaders::SplashScreen/prepareSplashScreen()[E:\dev\4.5.1\frameworks\projects\mobilecomponents\src\spark\preloaders\SplashScreen.as:340]
    at spark.preloaders::SplashScreen/Stage_resizeHandler()[E:\dev\4.5.1\frameworks\projects\mobilecomponents\src\spark\preloaders\SplashScreen.as:407]
The problem seems to be triggered by the line that sets the preloader, because if I remove it, the error is gone (although no splash screen is shown either).
Any ideas how to make it work?
Thanks!

import [install folder]\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\libs\mobile to your build path
Note: You must add the frameworks\libs\mobile\mobilecomponents.swc to the library path of the application to support the splash screen in a desktop application.

After Effects CS5.5 - Lion: Crash on splash screen EXC_BAD_ACCESS (SIGABRT)

So one day, out of the blue, After Effects stops wanting to open. The worst part is, I can't think of any changes that would have caused this.
I am running After Effects CS5.5 (10.5.1) on my MacBook Pro 13" (Early 2011), which is running Mac OSX Lion. Here is my system profile (with some sections omitted).
Just a few weeks ago, I began to consistently receive this message during the AE splash screen:
After Effects Alert
Last log message was: <140735295236448> <ASL.ResourceUtils.GetLanguageIDFromRegistry> <0> Unable to obtain the User 'Language' registry key at: Software\Adobe\After Effects\10.5.1\ Defaulting to 'en_US'.
Here is a crash log.
Any ideas?
First attempt
I figured maybe I had a bad preference file, so I cleared my prefs. Nothing changed aside from a modified error message:
After Effects Alert
Last log message was: <140735295236448> <DynamicLink> <5> 0x114ee8418
And a crash log.
Also, if I try opening AE again, after I cleared my prefs and opened it once, the error message returns to the "registry key" alert.
Second, third, fourth attempt
So I uninstalled and reinstalled After Effects about 3 times. No change. I used the latest download from Adobe, and the original Master Collection image: no difference.
Fifth attempt
I created a second admin account to see if this was an isolated issue. It isn't; same problem.
Sixth attempt
I thought about QuickTime, so I opened up System Prefs, and uninstalled Perian. I left the prefpane there though.
Also, I have the latest version of Java.
Seventh attempt (Added 19 March 2012)
I used the Adobe Creative Suite Cleaner Tool to wipe out my entire Adobe installation. I still have the same problem after a reinstall. I'm going to try installing AE on my external drive next. This is really frustrating. Has anyone experienced this issue and found a resolution?
Notes
Interestingly enough, all of the other Abobe CS5.5 apps I installed work fine:
Bridge
Photoshop
Illustrator
InDesign
Premiere Pro
OnLocation
Extension Manager
Added 1:54PM, 13 March 2012:
Also, opening up the render engine causes the same error message.

I just installed AE, have never used it, and am seeing it bail on startup with the same odd language registry key error. Please see my post on a related thread.
Any luck here? Would be nice to get AE to boot so I could evaluate it.

Splash Screen Landscape

Similar Messages

Maybe you are looking for