Splash Screen never goes away

I'll post this again because a lot of people are having this same problem, but to my knowledge no one has solved it.
In Compressor 3.5.1, when you load Compressor the splash screen appears but never goes away until you click "About Compressor" and then click on the splash screen, then it will disappear. I have trashed preferences and the problem persists.

I finally found a fix that helped me out on 2 different problems:
First was the issue with the green bar appearing on the right side of the frame.
Second, the Compressor Splash screen never disappeared after it had finished loading. Once you clicked on About Compressor then the splash screen it would finally disappear. This didn't cause any performance issues.
Thanks to monoschluzz in the following post for the directions to fix this nagging issue:
http://discussions.apple.com/message.jspa?messageID=10575848#10575848
Here are the directions he provided:
Stop all rendering in Compressor. From the Compressor Menu choose "quit all background processing" and close Comressor. Open a Finder window, choose " got to folder " from Finder's "go to" menu and type
/var/spool/qmaster/
Done that you're in the "Qmaster" folder. In that folder there are one or more weird named folders (random numbers & characters - i.e. 76646663-DD71D83A)
Delete that weird named folder (NOT the Qmaster folder itself) and restart Compressor.
At this point I was able to render clean mov's without nasty green pixels.
Hope that helps!

Similar Messages

  • Ok to discconect screen never goes away

    I was using my iPod when it for no reason froze. I thought, "no big deal" and reset the iPod, however when I did that a screen that said "ok to discconect" with a check mark appeared and has not gone away. I have tried restarting my iPod and that doesn't work. My computer also does not read the iPod. Any help would be appreciated. Thanks.

    Sounds like you put the iPod into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    To get it outa disk mode reset it by holding the center button and menu button for about 6-10 seconds

  • DO NOT DISCONNECT SCRREN NEVER GOES AWAY!!

    Hey i have an Ipod nano, 2 gen i think, 2gb. When I plug it into my computer the "Do Not Disconnect" screen on my Ipod goes up, and even when it's done uploading that screen NEVER goes away, it still charges, but that screen doesn't allow me to listen to my music when it's charging. Can I fix this?

    Yes You can fix this easily. First let the Ipod download files from computor(known as sync), once it has downloaded, then click on the nano drive on the desktop, from the file menu click on eject nano or use the apple key(next to space bar) along with the e Key, push these two bottons at the same time. after the nano drive symbol disapears from the desktop, the do not disconnect will be replaced with a charging sybol, and you will then be able to play all tunes on your nano while it's being chared. When the nano is charge it will change the nano display to an electrical plug. Have fun!
    (PS) if you need more help, Email me at ([email protected])

  • Itunes says "update complete" but "do not disconnect" never goes away!

    So, I wait and wait and "do not disconnect" on my ipod never goes away.
    A little history:
    I got my nano a few weeks ago, put a few songs on - everything worked fine. Then, I got a new computer. Since I only put a few songs on, I didnt mind starting from scratch. Now, I can't seem to get it to work!? I have songs in itunes. when i click on my ipod, it shows that i have songs on the ipod, it SAYS the update is complete, my ipod shows "do not disconnect" i wait for ages, and then finally just eject the ipod, and - NO SONGS are on it.
    help please. thanks
      Windows XP Pro  

    Do not disconnect always on, this happens when you have "enable disk use" ticked in the iPod preferences, in which case you have to manually eject your iPod.
    However if you are automatically updating your iPod and do not intend using it as a portable hard drive, you can set your iPod to automatically disconnect.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135

  • HT1339 My iPod classic shows that memory full in "other" category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away.

    My iPod classic shows that memory full in other category however there is nothing on it. I have left it connected all day and over night trying to restore it but the progress bar  never goes away. Is it shot or are there other options to restore to factory settings?

    Hi pbworth,
    When troubleshooting issues with iPod classic, it may be helpful to place the iPod into Disk Mode. For information on how to do so:
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thanks,
    Matt M.

  • Trying to download free trial. creative cloud screen comes up with turning circle in middle. after 2 minutes the screen just goes away and no evidence of download

    trying to download free trial. creative cloud screen comes up with turning circle in middle. after 2 minutes the screen just goes away and no evidence of download

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    -Similar in Windows https://forums.adobe.com/message/5853430

  • Software update that never goes away

    my macbook pro says i have a software update. i press update and it restarts my computer however it never goes away. i have tried several times. please help me figure out how to either update properly or get rid of update alert.

    hailey.o wrote:
    my macbook pro says i have a software update. i press update and it restarts my computer however it never goes away. i have tried several times. please help me figure out how to either update properly or get rid of update alert.
    What is the update?
    Pete

  • HT201401 The red dot on my voicemail icon never goes away. I have no messages, but it will never go away. Any ideas?

    Hi there, just got my new iPhone 4s & the red dot is always on my voicemail icon on the bottom of my homepage. So I check & I have no messages, yet it never goes away. Any ideas, or is it just a glitch in my new phone?

    I just had this problem and this is how I resolved it (with the help of an Apple  tech)
    Go into setings and see if you have Celular Data turned on.
    Settings / General / Cellular - Then turn Cellular Data  to ON

  • Mail is checked continuously. The "thinking circle" never goes away

    The little "thinking circle" right beside the 3g label in the top left hand corner never goes away in my mail app. This just started happening within the past week. This wouldn't be so bad if it wasn't chewing up my battery and bandwidth. Does anyone know why this might be happening or how I can make it stop?
    I have mail set to check every 15 minutes, but it just keeps checking continuously. I check yahoo and gmail accounts.

    My Ipad started doing the same thing this past week(5-6 times,and I am on manual), I tried switching app's and going back and it was still running. I then went to email sent, and after the sent mail was loaded I went back to mail, and it then loaded my new messages. suerte...

  • Software Center icon in system tray never goes away

    Hi
    We are in the process of migrating sccm 2007 to 2012 and noticed the Software Center icon sits in the system tray and never goes away. The system does not have new software available for awhile and the system was also rebooted. We are seeing this on many
    machines. What is the expected behavior? I have attached an image.
    This never goes away.  

    open the software center and look for any applications made available in 'available software' tab. You can hide this window by disabling the setting from Client Settings: Computer Agent\Show notifications for new deployments = "False".
    You can also configure the User Experience\User Notifications configuration setting for the app deployment to "Display in Software Center, and only show notifications for computer restarts".
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: eskonr

  • Keeps showing Do Not Disconnect never goes away

    I have a older ipod not sure what it is actully called it is slim and black and 4GB it is not working when I plug it into the computer it just keeps showing Do Not Disconnect and it never goes away.

    Hi Trudy...I had same prob before and you need to download apple's itunes software to be able to access or listen to your ipod...ok good luck! 

  • 10.5.2 Grey Screen after Login (and never goes away)

    I installed 10.5.2 late last night on my January 2008 Mac Pro and since hitting 'reboot' to install the update I haven't been able to use my system.
    I get to the Login Prompt, login with my username and password, and then all I get is a grey screen with a spinning colored cursor. It was that way still this morning when I woke up, as well as when I got home from work several hours later.
    I have subsequently shutoff my machine several times and it still does it everytime I login.. has anyone experienced similar issues and is there a fix besides re-installing from the restore CD?
    Christopher

    I read several threads and tried several things and this is what fixed it.
    I was able to boot up into single user mode.
    I then tried safe mode.. it took about 10 minutes but I got to the desktop after logging in.
    I then ran Software update again and it installed "Leopard Graphic Drivers Update". I then rebooted. Now everything works again! Still a pain!
    Christopher

  • Blackberry 810o: WHitye screen on boot, never goes away.

    When I power on my BB, the screen comes on white, as does the roller and the keypad. And it stays that way. If I leave it for a minute or so (long enough for it to fully power on) and the spin the roller or try to dial a number, I can hear the clicks/key pad tones, but the screen stays white.
    I downloaded the software, and I reloaded it onto the device. While it says that the process was sucessful, I still get the same behavior. 
     Any ideas?

    Did you notice if during the reloading process if the screen stayed white, or did I go dark at certain parts?
    The only other thing I would try is trying to wipe the device with JL_Cmder
    http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • I updated Pages, and I can't get the "What's New in Pages" splash screen to go away.

    The "Continue" at the bottom is useless. *** Apple?

    Just close the app and relaunch it or close the app and reboot if closing alone doesn't work,
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Pages app and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Sept '06 black macbook w/ os x lion, enters desktop and the color wheel starts spinning and never goes away...no function.

    I have OS X Lion on a black macbook (bought 9/06). OS X has been on it for over two weeks, no further changes have been made. Updates were all current as of two days ago and thankfully it is backed up. This macbook is being used for anesthesia school and I HAVE to get it up and running again quickly. Typically I would insert the OS startup disk and hold 'C', but in this case Lion is from the App store. What do I do now? Need help quickly if anyone can. Thanks a million!

    Hi Lex, thanks for the response. It actually is a 2.16GHz Core 2 Duo processor. SInce my post, it "spontaneously" resolved, however it is incredibly slow anytime I use any program from Microsoft Office '11 or iWork '11. I have the maximum 4GB of RAM and I have 35GB of free space on the hard drive so it didn't seem to me that it should be so slow. I believe I am going to run the disk utility to attempt to fix anything that may be found wrong and if that doesn't work, I will just wipe the driver and start over from scratch. Thanks for the post!
    CK

Maybe you are looking for

  • Horizontal Spry Menus are not showing up in ANY browser HELP!

    www.tvnewsjunkie.com I am a novice web designer and I need help! The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side. HOWEVER, when I click o

  • F110 output type

    Hi frnds,     I had a scenario to display the sapscript when F110 transaction has been run. I found the print program name as RFFOUS_C.    I checked with TNAPR table and found no entries on corespondence with the output type. I want to know the appli

  • Word documents embedded links issue

    Hi Friends, We have a strange issue, wherein we have some word documents in a document library in a SP 2013 site.  Each document has some embedded hyperlinks pointing to some other Office documents.  When we open the doc in OWA and try to click on th

  • Open pdf at specific bookmark

    I'm trying to opne a pdf from command line at a specific bookmark.. Here is the command: Acrord32.exe /A "nameddest=Getting Started" C:\\helpfile.pdf if the namedest parameter contains a space its not working.. Otherwise i'm able to open the pdf at s

  • System wide proxy audit

    Hi, Can a system wide audit setting be created for a proxy user? In short, can there be a audit action entry in the DBA_STMT_AUDIT_OPTS table where the USER_NAME field has a NULL value and the PROXY_NAME field has some username? Thanks, Vijay