Split a border container or a group into 2

Hello,
I have a container (a border container or a group), now depending on a specific point along the width of the container i want to divide the container into two individual containers.
Is there any way to do it using flex and actionscript ?
please help!

Hello Onkari,
Thank for the reply.
I guess i was not clear in explaning what i wanted.
I have drawn a waveform of a music track and added it into a border container.
I actually want to split the waveform into two from a point, so i need to split the container.
so is there any to do so?

Similar Messages

I have been successfully sending out e-mails to all people listed in a Group Address but yesterday only some of the people received their mail. Today I split the list, 25 in each Group Address, again, the same people did not receive their e-mail. Why?

I have been successfully sending out e-mails each month to about 50 people whose addresses are listed under a Group Name. Yesterday about half of the e-mails were received, the other half weren't. So I tried splitting the group into 2 separate Groups, again the list who didn't receive the first mailing again did not receive the second mailing. There does not seem to be anything that connects the recipients or non-recipients. They have a mix of providers, it was not just the first half of list that was affected, it appears to be totally random. Any suggestions?

Neither of these error message look like they're from Exchange.
Connected to 68.232.130.28 but connection died. (#4.4.2)
I'm not going to try again; this message has been in the queue too long.
Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue to long.
Are those from NDRs someone in your organization received, or are they from NDRs received by a sender outside your organization?
Is 68.232.130.28 your IP address? The IP address resolves to the name esa2.firstam.iphmx.com. Is that a MX for the recipient's domain?
--- Rich Matheisen MCSE&I, Exchange MVP

How do move ALL contacts from other groups into iCloud contacts group

Is there a way to make Icloud contacts the default for the "groups" on my iphone ?
OR
is there a way to merge ALL the other groups into icloud contacts so i just have the one Icloud group to deal with on the iphone ?
Thanks !

This page: http://www.macworld.com/article/1054187/outlooktoaddress.html - has this to say:
'Under Outlook 2002 you could simply open your contacts and drag them to the desktop to turn them into vCards. No longer. Try this and the contacts are converted to messages.
While you can select a single Outlook contact, choose File -> Save As and, in the resulting dialog box, choose vCard Files from the Save as Type pop-up menu, this works only for individual contacts—you can’t export a group of contacts this way.
You have a few options for eventually getting the things out of Outlook. The first is to select all your contacts and choose Action -> Forward as vCard. Outlook will create a new email message that contains all your contacts as individual vCard attachments. Send this message to yourself, pick it up on the Mac, drag these files into Address Book or Entourage’s Address Book and you’re good to go.
Or Sperry Software can lend a hand with its $20 vCard Converter Add-in for Microsoft Outlook. This adds a service that enables Outlook to export all your contacts as a single vCard.'
A Microsoft Help Page suggests:
'The simplest way to do this would be to export your Outlook contacts to a tab-delimited file and then import that into Address Book.
In Outlook select File menu --> Export... and select Contacts to a list (tab-delimited text).
Save the new file to your Desktop.
In Apple's Address Book select File menu --> Import... and select your file.
Use the next window to match the field names in Address Book with those in your export file'
If using either method you import into Address Book you can sync that to iCloud, which is probably easier than trying to import into the iCloud website. If you're prepared to splash out $20 the Sperry Software program would simplify matters a lot.

In address book how do I move all cards from my 'last import' smart group into a new group?

In Address Book, how do I move all cards from my 'last import' smart group into a new group that I will create? So far I am not being allowed to Edit Smart Group!
Thank you x

Simon
You’re going to have a very big problem and very soon. These missing pics are the beginning of trouble.
the total size of all my folders on my 60gb internal drive is 46.5 gb, yet only 1.9 gb is available,
OS X needs about 10 gigs of free space on the hard drive for normal OS operations such as virtual memory and temporary files. Without this space the machine slows down as the OS hunts for free space, files become fragmented and applications begin to crash. The risk of data corruption increases exponentially.
You must, as a matter of urgency, make space on the drive. I cannot stress this enough.
You may be able to recover the pics from your camera card using an app such as MediaRecover
Regards
TD

How to insert Group into Report Footer or have two Groups in same level

Hi,
I am wondering whether it is possible to have two indepent groups---they are at the same level, in one report.
I tried insert a group into Footer section or just insert two unnested groups in Group Section, but seems undoable.
Thank you for your help!

My suggestion will work. The basic layout would be:
G1Ha - printed when grouping field = 1 (your "Group header #1" above)
G1Hb - printed when grouping field = 2 (your "Group Header #2 above)
Da - printed when grouping field = 1 (your "AccountNumber1 Account Name1" under group header 1)
Db - printed when grouping field = 2 (your "Subreport for AccountNumber1 under group header 2)
G1Fa - printed when grouping field = 1 (your "Group Footer #1 above)
G1Fb - printed when grouping field = 2 (your "Group Footer #2 above).
Since the grouping field is the primary grouping, the order that the formats will display is:
G1Ha
Da
Da
Da
G1Fa
G1Hb
Db
Db
Db
G1Fb
matching your example perfectly.
HTH,
Carl

SSRS 2008 R2: How to add Border to Parent Column group only in Tablix?

Hi there,
I have a report where there is a Parent and Child group on columns. I want to add a left/right border to just the Parent Group (Fiscal Period) with no border between the Child grouping (Fiscal Weeks). How can I do this? I have found expressions
using the Previous function but that doesn't appear to be supported in a Tablix? Am I missing something?

Hi Debn,
From your description, you want to use expression to display or hide the textbox border on the column base on it's scope, right? In Reporting Services, the color of the textbox border is support expression, however we cannot use the expression to display
or hide the textbox border dynamically. So I am afraid your requirement cannot be done.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

Import of material groups into hierarchy not possible (note 432339)

Dear All,
I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system. Prior to this our SRM system configured as standalone and Material Hierarchy is already defined. When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message. In the message the OSS note also mentioned. In the OSS note they have given following solution
Error message "Import of material groups into hierarchy &1 not possible":
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign
hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
My problem is I am not able to find out the path given in the OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
with regards
Ram

Hi ram
one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
plz visit Marchin blog to.o
since u r aleady in standalone but now you may try push material group from ecc to srm .
so you need to do set up all crm middleware settings in ecc and srm.
br
muthu

Songs not being grouped into one album/artist!!!

Ok, so just as an example... I have this one CD - American Idol 2 All-Time Classic American Love Songs ... my problem is that it seperates them all into individual artists and won't group them together - which isn't too big of a problem, because I can just rename everything and make them group. The problem is, 2 of them do group! Clay Aiken and Ruben Studdard's tracks are recognized as part of one album and are automatically grouped into a Various Artists category! eek! It's the only time it's happened - It doesn't do that for any other American/Canadian Idol album I have! and I just can't figure it out. I tried renaming those tracks and stuff, but it just wouldn't work, it still only grouped those two seperately!

Ok and it also happens with a couple Westlife songs - I have a Misc category because they're from a couple different singles albums and I didn't want like, one song per folder! So I just grouped them all, but again, iTunes won't make ONE Misc Category, it bloody makes two!

HT2486 How do I import existing Outlook contact groups into Mac Address Book?

After months of problems with Microsoft Outlook 2011 for Mac, I am switching to Mac Mail. I seem to have successfully imported my individual contacts into Address Book. However, I have been unsuccessful in figuring out how to import group contacts into Mac Mail.
So far I have created .txt files, (a separate one for each group), listing each e-mail address in that group separated by a comma. Can I input this information into Address Book somehow? If not, how else can I import my groups into Address Book in a more efficient way than manually entering them? Manually dragging and dropping names into each new Address Book group is not an option, since I have about 50 groups with 20-50 people in each of them. It would take me extraordinary amounts of time to do that, not to mention the frustration.
A second question: There are many duplicates listed in my address book. When I select Card>Look for Duplicates, it tells me that No duplicates are found. They most definitely exist, however. How can I erase them without having to manually delete each duplicate?

You can't transfer the groups, you'll need to do it the hard way.
As for the duplicates, how many accounts do you have in your Address Book?

How to Integrate new material group into COPA planning KEPM

Hi Sap Guru's
Please help me in Integrate new material group into planning
The planning coordinator is informed that a new material group is to be marketed in the coming year and that this new material group should be included in planning. To generate a default plan value automatically for this new material group, the planning coordinator uses the planning method Copy. In the Transform characteristic values function, the necessary entries are then made so that the sales quantities for an existing, comparable material group are copied to the new material group.
How can i do the above process...
Thanks
Sap Guru

HI,
create a new characteristic (KEA5), choose transfer from SAP-table (the tab. where your fiels is available in material master (MARA)), choose the field from the list of available fields from MARA, enter text, save, activate. Assign the char. to your op. concern. Generate the operating concern.
Aftre this steps the field is in yopur operating concern and the derivation rule can be seen in T-Code KEDR (rule created by SAP automatically). If not, add a derivation rule in KEDR (table lookup).
best regards, Christian

How do I convert a vcard or Contact group into a textfile?

how do I convert a vcard or Contact group into a textfile?

Start to learn about PDF Forms here:
Acrobat User Community Tutorials

When typing a Contacts group into Mail address, it inserts duplicates

MacBook Air using Mavericks. I have a Group set up in Contacts. When I type the name of that group into the BCC field in Mail, I get every name in the group at least twice.

I had similar problems. In Leopard, I used to be able to just drag one or more Groups from the Address Book to the address field in the Mail message, and it would go in unexpanded, as per the Preference I have set in Mail. With Snow Leopard, when I do this all the individual addresses go into the address field PLUS the unexpanded Group.
However, I found that if I Select the group in Address Book, Copy it, then Paste it into the Mail message address field, all is well. That is, the Group goes into the field unexpanded, and the individuals in the group all receive the message with "To: Undisclosed Recipients" as I intended.

How to force newly provisioned security groups into Planning

I just provisioned 3 new security groups in Shared Services (9.2.0.2). 15 minutes later our Planning Admin says that she still cannot see these new groups within her Planning app (9.2.0.2.0). Is there any way for me to force these new groups into Planning so that she can apply her security to them within the Planning app?

Hi,
Did you tried out Jake's suggestion?
Other tests are log in as a user that belongs to the group to see if that updates the tables.
Or run the provisionusers utility for a user that belongs to the group.
Or the the updateusers utility which syncs ups users/groups with shared services.
I cant remember which utility is the best to use in this instance.
Cheers
John
http://john-goodwin.blogspot.com/

How to convert groups into layers by retaining groups names

Hi,
I have a file with 90 illustrations on 90 pages. Unfortunately, all illustrations are located in 90 groups but in a single layer. The groups however are named. I'd now like to convert those named groups into 90 layers by retaining their names in order to export each layer into single PNG-files with their correspondent layer-name later on.
Any ideas anybody?
Thanks for your help, kind regards,
Ralf,
Cologne

AppleScript = mac only
VBScript = pc only
JavaScript = cross platform
here's a sample in JS...it does the first part, it moves the groups to layers
var idoc = app.activeDocument; // get active document
var ilayer = idoc.activeLayer; // get active layer
for (i=ilayer.groupItems.length-1; i>=0; i--) // loop thru all groups backwards
          var igroup = ilayer.groupItems[i]; // get group
          var newLayer = idoc.layers.add(); // add new layer
          newLayer.name = igroup.name; // rename layer same as group
          igroup.move(newLayer,ElementPlacement.PLACEATEND); // move group to new layer

Split a border container or a group into 2

Similar Messages

Maybe you are looking for