Split a single avi into multiple avi files?

Hi there, totally new to PS Elements Premier 10.
I have some VHS video tapes that I converted to AVI format. I'd like to separate the videos into segments (ie; separate Christmas 1982 from Easter 1983) - and store them in multiple AVI files. I tried to do this in MS movie maker, but that was taking forever. I bought Premier Elements because I figured it should be easier; and it probably is, but I'm noob...
I have split the video into the scenes I want. I have added markers... but I am having trouble splitting the actual video into chunks of clips - ie; one big avi file would become 10 smaller avi files. I am trying to watch these on a boxee box, so I do want the to be separate files - I dont want to do a "web dvd" output.
I have tried this:
I dont see export functions.
I go to "SHARE" but it only lets me export to a single output.
How can I do this? It's for Christmas presents, so it's a little urgent - any help you can give me would be soooooo appreciated.
thanks!

Thanks everyone. I ended up figuring it out - whether or not I did it the best / easiest / fastest way is up for debate
I split the video into clips.
Separated the clips into different timelines.
"left aligned" all the clips in their respective timelines so they all start at 0:00 (just for simplification)
Disable all clips / timelines (right click, enable = false)
Enable the individual clip/timeline that I want to save
Set up the work area bar so that it starts at 0:00 and ends at the end of the specific clip I enabled. With the "snap top" functionality turned on, this is pretty easy.
Go to "SHARE" and configure my outputs
Make sure that "Share Work Area Bar Only" is checked on the "Share" tab before committing
It creates an avi of only the enabled clip, for the timeline I created.
Important:
Make sure you set the work area bar properly, or you'll have a 10 minute clip followed by 2 hours of blackness.... did that a few times ha.
Make sure you click the "Share Work Area Bar Only" on the share tab - or the same will happen.
Thanks for the replies everyone - let me know if there is a better way to acheive this in PE10.
Thanks!

Similar Messages

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

Splitting a single video into multiple sub-videos

I have CS4 Master Suite on MAC.
I want to take a single video and split it into consecutive chunks and store each chunk as a separate video file (Eventually to put in a database to allow web uses to select which chunk(s) they want to view.
I can do this "by hand" in Premiere but I want to eventually do this in a semi-automated way. (Visually decided where to place the splits, but automate the splitting, naming conventions etc.
Suggestions?
Is there a scripting language interface that could help me do some of this?
Thanks

I did not make clear, that of course I don't one to do this with ONE video, but with hundreds of hours of video in typically 20-30 second chunks. So perhaps there are good alternate suggestions to do what I want to do?
I want eventually to give the enduser the possibility to run a database query to select one or more of the final chunks/chapters for viewing

Splitting the single record into multiple:One-to-Many;S'ingLikeRESULT_TABLE

Hello Friends,
        I am an ABAPer and new to BW. we have a requirement as follows.
BW is getting data from R/3 system. all the purchasing, sales data and billin data.
at the BW end for each Material document we get multiple ITEMS. ( items will be retrieved at BW end)
the question is how to get the multiple entries in the result.
Each material will have one or more items. so we want to write a separate record for each item. Can we do it using RESULT_TABLE?
I have no idea how the data process at BW end.
I have been trying to find the info in SDN but could get what exactly they are saying. bit confused with key figures and so.
Can anyone of you give some idea on how to get this done please ?
Thanks a lot for your help..
Regards,
reddy
Edited by: SAP User on May 19, 2008 4:27 PM

Ramesh,
   Thank you for the resp.
    Could you please tell me which table actually holds the data that is coming from R3 system?
at the moment I am trying to get the item data from a select statement for a particular master data (which is coming from COMM structure). then i am updatting the return table. but only the last value is getting updated in the final output.
Could you please give me some idea on how to do this? Thanks
Regards,
Sree

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

Splitting of a CSV File with Multiple Records into Multiple XML File

Dear All,
<b> I am doing a Scenario of CSV to XML Files. I am using BPM for the same. My incoming CSV File has got multiple records. I want to break this Multiple records into Multiple XML Files having one record each.</b>
Can someone suggest how can I break this rather Split this into Multiple XML Files.
Is Multimapping absoltely necesaary for this. Can't we do this without Multimapping. Can we have some workaround in the FCC parameters that we use in the Integration Directory.
Kindly reply ASAP. Thanks a lot to all in anticipation.
Pls Help.
Best Regards
Chakra and Somnath

Dear All,
I am trying to do the Multimapping, and have 0....unbounded also. Someways it is not working.
<b>
Smitha please tell me one thing...Assigning the Recordsets per Message to 1, does it mean that it will write multiple XML Files as I want.</b>
Also I am usinf Set to Read only. So once the File is read it becomes RA from A. Then will it write the other Records.
I have to use a BPM because there are certain dependencies that are there for the entire Process Flow. I cannot do without a BPM.
Awaiting a reply. Thanks a lot in anticipation.
Best Regards
Chakra and Somnath

Split MP3 file into multiple MP3 files

I've been through the help section and is till cant seem to figure out how to split a large (2 hour) mp3 file into multiple mp3 files.
I have a 2 hour MP3 recording (Stereo not mono), and I have added markers (by simply pressing keyboard shortcut 'M' to add marker), but now I would like to know how to split that one mp3 files into multiple files from the markers which I have made...
All my marker types are "Cue" when i pressed 'M' at the locations I want the track to end/start

You didn't say which version of the program you're using, but in general, there is a way to do this by adding one additional cue at the very end of the file, then "merging" the cues (which converts the space between each cue into a "range"), and batch processing each range out to a separate file. (Make sure there's a cue at the beginning of the file, or at least the first material you want in a new file.)
Now that you've done all that work, I'm going to tell you that what you're doing is probably a bad idea. Opening any mp3 in Audition and resaving back to mp3 means you've doubled the losses and distortion inherent with the mp3 compression. Audition can't do lossless editing of mp3s. The bottom line: are you really splitting the file, and does the result have to be mp3 format? If saving to a (wave file, or any other lossless format, then what I'm saying doesn't matter.
In any case, "mp3 Direct Cut" is a terrific freeware program that does lossless mp3 editing, and I'd highly recommend you try it. It's saved my neck a number of times. See http://www.mpesch3.de.

Splitting TempDB into multiple data files.

To avoid contention we have to split tempdb into multiple data files. But as for case suppose, there is 20 GB total space is on the drive containing 1 tempdb data file of 15 GB. And I have to create 3 more tempdb data files, and as recommendation all files
should be of same size.Then how to handle this situation and configure all data files with same size?
Pranshul Gupta

But as for case suppose, there is 20 GB total space is on the drive containing 1 tempdb data file of 15 GB. And I have to create 3 more tempdb data files, and as recommendation all files should be of same size.Then how to handle this situation and configure
all data files with same size?
So your goal is to have 4 tempdb files, each 5GB? Below is a sample script to accomplish the task within the 20GB space constraint.
--reduce size of existing file to 5GB
ALTER DATABASE tempdb
MODIFY FILE (NAME='tempdev', Size=5GB);
DBCC SHRINKFILE('tempdev',5120);
--add 3 new 5GB files
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev2', FILENAME='D:\SqlDataFiles\tempdb2.ndf', Size=5GB);
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev3', FILENAME='D:\SqlDataFiles\tempdb3.ndf', Size=5GB);
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev4', FILENAME='D:\SqlDataFiles\tempdb4.ndf', Size=5GB);
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

How can I split an Orders05 iDoc into multiple iDocs?

Hello,
Can one of you experts please tell me how I can split an ORDERS05 iDoc into multiple iDocs based upon Delivery addresses?
For example, if the iDoc contains 3 different Delivery Addresses then I need to split it into 3 iDocs.
It has been suggested to me that I can Create a custom function module. In this custom fm split the idoc into 3 based on the delivery address and create it using the FM MASTER_IDOC_DISTRIBUTE.
Problem is I don't know how to do this. Any help is greatly appreciated. Thanks.
Dan

Hi Dan Avis
Write a Custom Z program .
1 get order05 idoc number....
2 get the segment details...(Based on you condition...)
3 In a loop send the data to the FM MASTER_IDOC_DISTRIBUTE (Based on you condition...)
4 IDOC will generated,,,every loop and
5 Change the status of original idoc .
or
Create Function module and use the FM as process code to create 3 idocs...and processs...new generated idoc and block original idocs...
Call me if you have questions @ 302 290 5677
Thanks
Ramesh

I can't split a home DVD into multiple events. Why?

I have a DVD of old super 8 movies that I converted into a DVD years ago and want to extract selected segments as short movie clips. I have been able to load the entire DVD as a single event but I wanted to break this single event into multiple events based on various themes. My problem is that I don't seem to be able to split the content at all. The "Split event before selected Clip" always appears to be grayed out. What am I doing wrong?
paulfromcrystal

I just figured it out. Somehow I didn't change it to the correct code of 1. So on the second shot of 5 allowed I realized I didn't change and save. Now the dvd played.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Scheduling multiple tab BO XI3 report needs to save into multiple text file

Hi,
I have BO XI 3 Desktop Intelligence reports, those reports contains multiple tabs. Once after scheduling these reports the output needs to save as different text files (each tab as separate text file). Generally when select output as text file we will get the text file with the data of current tab, but in this scenario I want all the tabs data into different text files. I guess we can do this with macro. But I am not good in macro development, hope somebody can help me.
Could you please help out for the same!
Thanks,
Rama

Thanks Dan.. I made chenges in code as per your suggestion.. its working fine in DeskI -> local PC
But this is not working in InfoView level... when i scheduled the same report its not saving into multiple text files... can you please have look...
macro code as follows:-
Public Sub SaveAsText()
Dim StrTxtPath As String
Dim BusDoc As busobj.Document
Set BusDoc = ThisDocument
Dim BusRep As Report
Dim I As Integer
On Error GoTo ErrHandler
'StrTxtPath = "
xxxx.xxx.xxx.com\common\Reporting\"
StrTxtPath = "D:\Business Objects\Test_Macro\"
For I = 1 To BusDoc.Reports.Count
Set BusRep = BusDoc.Reports.Item(I)
BusRep.ExportAsText (StrTxtPath & BusRep.Name)
Next I
ErrHandler:
Exit Sub
End Sub
When i run this macro through DeskI.. its saving the report as multiple .txt files with respective number of tabs... but the same thing is not working when i tried in scheduling...
Can you please suggest me what are the changes needs to be done...
Thanks in Advance
Thanks,
Rama

Split records into Multiple csv files using a Threshold percentage

Hi Gurus,
I have a requirement to split the data into two csv file from a table using a threshold value(in Percentage) .
Assume that If my source select query of interface fetches 2000 records , I will provide a threshold value like 20%.
I need to generate a csv1 with 400 records(20% of 2000) and the rest of the records into another csv2.
For implementing this I am trying to use the following process.
1) Create a procedure with the select query to get the count of records.
Total Records count: select count(1) from source_table <Joins> <Lookups> <Conditions>;
2) Calculate the Record count to first CSV using the threshold_value.
CSV1_Count=Total records count /threshold_value
3) Create a view that fetches the CSV1_Count(400) records for CSV1 as follows.
Create view CSV1_view as select Col1,Col2,Col3 from source_table <Joins> <Lookups> <Conditions>
Where rownum<=CSV1_Count;
4) Generate CSV1 file using View 'CSV1_View'
5) Generate CSV2 File using the Interface with same select statement (with columns ) to generate a CSV.
select Col1,Col2,Col3 from source_table ST <Joins> <Lookups> <Conditions>
Left outer join (Select Col1 from CSV1_View ) CS on CS.Col1=ST.Col1 where CS.Col1 is null;
Which gives the Total records minus the CS1_View records.
The above process seems a bit complex and very simple . If any changes in my Interface I also need to change the procedure (counts the no:of records).
Please provide your comments and feedback about this and looking for your inputs for any new simple approach or fine tune the above approach.
Thanks,
Arjun

Arjun,
This are my thoughts and Lets do it in 3 Steps
Step 1. ODI Procedure
Drop table Temp_20 ;
Create table Temp_20 as select * from table where rownum < ( SELECT TRUNC( COUNT(1) /5) FROM TABLE ) .
[ ** This way iam fetching approx 20% of the table data and loading into Temp table . 1/5 th is 20% so i am dividing count by 5
I don't believe View will help you especially with RowNum as if you run the same query with rownum < N the rows order might differ . so Temp table is great ]
Step 2 . Use OdiSqlUnload with select columns from temp_20
Step 3 . Use again OdiSqlUnload with select columns from table where ( uk keys ) not in ( selecy uk_keys from temp_20)
[** this way you can pick the remaining 80% ** and the data will be not repeat itself across 20% and 80% , as might happen with view ]
what do you think ?

Split a single avi into multiple avi files?

Similar Messages

Maybe you are looking for