Split audio from hdmi

Hi there,
I'd like to replace my first gen Apple TV with a new one.
The problem is the lack of analog audio outputs.
Currently I connect to my tv with hdmi and to my hifi with phono plugs.
The new Apple TV only has hdmi and digital audio out which my hifi doesn't ....
Is there a way I can split the audio out of the hdmi so I can play iTunes through the hifi with the TV switched off?
Cheers Lizardpoint

I'm not aware of any cables that split audio from HDMI and in any case it would still be digital audio. You might want to think about one of the items below and use the optical cable.
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Similar Messages

Splitting Audio From Video

Hello
I'm having trouble splitting audio from video. I currently have Final Cut Pro 6 from the final cut studio package, and my issue is that my audio is not synchronized with my video. The audio is coming in too early for the video and the voices of the people in the video do not match up. How can I fix this problem? How can I move the audio without moving the video as well?

Select the clip and hit command L to separate the tracks.
The real issue is why the footage is out of sync.

No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
This question was solved.
View Solution.

Hi,
Please try:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Split audio from video doesn't split video at the same point ?

When I split the audio from a video in GarageBand I would like the video to be split at the same point (so that I can insert audio in between without everything getting out of sync).
Is this possible?
(I don't want to use iMovie since that turns my 150 MB mov file into a 8 GB file..take ages to import)
The reason I want to insert audio in between video fragments is that I am creating an audio description of a tv series for a blind friend. I watch the video, pause that, and describe. Then continue.
If I can split both the video and "audio from video" at the same point and drag those to the right, so there's room to record something in between (then in the end I'll just drag it all so that the parts join up, delete the video and merge the audio. I hope.)
Thanks in advance!!

I figured out how to reset the Youtube video upon hiding thanks to Heathrowe's answer and FigFrance's contribution to the thread found here:
https://forums.adobe.com/message/4979969#4979969
The secret was adding .empty() to my video container. Here is my functioning button code:
Show Video:
//code to embed youtube into symbol
var youtube = $("<iframe/>");
sym.$("video").empty().append(youtube);
youtube.attr('type', 'text/html');
youtube.attr('width', '640');
youtube.attr('height', '360');
youtube.attr('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');
youtube.attr('frameborder', '1');
youtube.attr('allowfullscreen', '0');
// Show an element
sym.$("video").show();
Hide Video:
sym.$("video").empty();
// Hide an element
sym.$("video").hide();
Brandon

Can I port Apple TV audio to RCA and retain audio from HDMI?

Odd situation: My Audio receiver only allows RCA Analog for the outdoor speakers and will allow, but will allow digital for indoor speakers. I want to get my mom an iPad so she can easily either play audio while outdoors (using the Red and White Analog) and at the same time have the Apple TV plugged into the HDMI receiver for indoor video viewing and listening to music.
What is the best way to transfer Optical into Analog (red and white)
Is it possible to switch from purely HDMI output (while watching video) to solely audio from the Optical port (which would be converted to Analog)
Can this be set up by me, but used very simply for a non-tech savvy woman?

no matter what then depending on the converter you use audio and video could very easy get out of sync

No audio from HDMI connection??

I have wonderful video but no audio from G70-460US. It has been upgraded to Win7 with the HP disk. Any help would be greatly appreciated and thanks in advance!

Hi,
I've replied on your original post on the link below.
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/No-HDMI-audio-with-Windows-7-Ultimate/m-p/6...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No audio from hdmi port on pavilion dv6

hey everyone, perhaps someone can help me out with this audio issue. i have a pavilion dv6 and I'm trying to pass audio through the hdmi port to my dvdo edge scaler, but it doesn't seem to be working. i don't have any trouble with the audio from the hdmi port to my plasma. but i also dont have any other audio issues with other units plugged into the scaler. I tried changing default audio device and then my media players stops working. so I'm very confused if anyone has any ideas I'm fresh out as I have been working on this problem for most of the afternoon. thanks

Did you install the Intel chipset driver , the Intel IMEI driver, HP Quicklaunch driver and the HP Software Framework?
The simplest way of reinstalling the OS to a new hard disk would have been by using the USB recovery media. From the HP Recovery Manager select the Factory image recovery.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I output Apple TV audio from HDMI and Airplay simultaneously

Is there a way to output Apple TV (2nd Gen.) audio from the HDMI port and Airplay simultaneously? There is no "Multiple Speaker" setting in the "AirPlay setup on the Apple TV.

Not possible.

Splitting Audio From Video from one video file

I used to use cs4 and when i had a video and dragged it onto the timeline you could right click and unlink the audio from the video.
i now have cs5 and when i click unlink nothing happens, is there another way to do this or atleast somehow mute the audio in the video clip?

well i had just realized that premiere pro is sticking my audio files in the fifth audio column. but it wont allow my to move it to audio one, do you know how i could do that?
This is due to the differences in channel-count between your Audio Stream, and those other Audio Tracks. PrPro requires that the channel-count match. See this ARTICLE for more details.
Good luck, and hope that explains why you see, what you see.
Hunt

Got Mavericks now no audio from HDMI

So I upgraded to Mavericks today and my HDMI that I plug to my TV from my Macbook Pro no longer has audio. I'm not that deep into the technical side of things. All I know is I use my Macbook Pro with my Sony Bravia TV everyday connected directly from MBP to TV with an HDMI cord. I update to Mavericks and now I get no audio at all but the video is as normal as it's ever been. Now I have, of course went to settings and clicked HDMI output to TV, I'm not that inexperienced. I'm not getting audio out of any application. I tried switching outputs while connected and switching back and even restarting the MBP multiple times while connected to the TV to no avail. Nothing has changed in the routine and it is as basic a set up as it gets. Do I just need to go back to Mountain Lion which is what I had prior or am I overlooking a simple solution here.

Yes it shows up like it normally did the day before. Before installing Mavericks there was never an issue. It's Internal speakers and Sony TV with a check mark by Sony TV.

Delay difference on audio from HDMI vs Phono

Hi All
I'd like to use my ATV to have sound output from television but also from stereo amplifier at the same time. I have the TV connected via HDMI and the stereo via phono but there is a slight time delay on one of the outputs and the audio sounds terrible.
If I use the TV on it's own or the stereo amp on it's own the audio is fantastic.
Can anyone help?

Processing video/audio on a TV can introduce a delay fo several to tens of msec. Mainly it's the video processing that causes delay.
For most TVs internal audio/sound output the manufacturer will have ensured things are in sync.
The problem arises when you have a display and a separate sound generating system - analogue stereo audio, unless processed at the amp eg DLP or some other pseudo surround, is just amplified and heard almost instantly. Processing of digital audio streams eg via optical or co-axial, might introduce a slight delay but very little compared to image processing as for video consecutive frames are often analysed before outputting the first. Once there's a significant picture/external audio delay you might notice lip sync issues for video, and if comparing Tv and separate audio there'll be a delay.
Even if both are in sync if playing in different rooms you may get delay when listening simply due to the slow speed of sound.
AC

No audio from HDMI Macbook mid 2009. Solution through Apple TV?

Hi all,
I have recently bought a nice Philips Smart-TV 46PFL4208T. I planned to directly use the TV to watch Flash or Sillerlight containts, without the needed of connecting the laptop. Unfortunately, the Philips software for Smart-TV is not yet mature and it does not support not Flash nor Silveright.
This means that I must to connect my mid 2009 MacBook pro to the TV. That way I would just use the laptop capabilities of reading Flash/Silverlight and project them stratigthly into the TV through the HDMI connection. So, I went to the Apple Store and I bought a straight cable MiniDisplay-HDMI (paid around 50€). Unfortunately, the audio does not work. I read around and it seems that my latptop is too to support audio HDMI and that there are no turnarounds for this issue.
So I was thinking to return the cable and get an Apple TV instead, but I don't know if Apple TV can be used for my goal. Could you please let me know and/or provide any suggestion to solve my issue?
Best,
Ubaldo

Yeah, just opened a discussion there, only for curiosity.
At this point instead of buying an Apple TV, I may keep my HDMI cable to connect to the TV an then I may just connect an audio cable from the heaphones out of my laptop to the TV or to an external loudspeaker.That way I would have everything mirored on the TV as well. I think I will adopt this solution while waiting that the Philips guys release a good software for their TVs.
Moreover, considering that I will just run some TV from some TV website, it is not important really to have laptop mobility (i.e. wireless), since it will standing on a chair while I am comfortably watching some nice TV show laying of the sofa
So, no points to get an Apple TV (I don't even need its smart functions, having already a smart-tv).
Thanks anyway for the answers.

No audio from hdmi output from graphics card

hello, i have a ms-7191 motherboard that has on board graphics, i installed a visiontec ATI 4350 card so i can output the a/v to my vizio 46" TV using one of the hdmi ports. , the video works but no audio. tried to update the drivers from msi-no help, tried to update the graphics card drivers from visiontec (added the hd audio driver)-no help. tried updating the realtek driver-no help. tried swapping hdmi ports on the TV-no help. i know that i'm not the first to not be able to do this and i have searched for the answer, but i out of ideas, is it possible the problem is that it has a onboard graphics on the board? what should i do now?
Joel

This board came with a spidif bracket-installed into the pci e connector, maybe i am missing something here, is it that is there is no audio connector to the graphics card, so there will be no sound from the hdmi connector? if so how does one get a card to work with the hdmi for both A/V? i thought this card will be able to access the needed info, maybe not then, and if that is the case, then, i don't understand why we have graphics cards with the hdmi interface if it is not useable. i should be able to get by just fine with a dvi out to the tv and add a audio out ( but this tv doesn't have a dvi port ,just the vga-crap. well i do have the s video port-it ani't all that either,,please shed more guys...
Joel

How to split audio from video clip

Title said it all.
Thanks

Command + L does nothing. Any other ideas? What I saw in a tutorial was that they selected a clip, then did some key sequence and it split out the audio track from the video. The audio then showed up as a green section right below the video track. They were doing this to delete the audio. They would split it, then select the audio track, then delete it. I realize I can drop the audio level, but this seemed like an interesting option.
Thanks

No audio from hdmi on macbook pro 2011

I just upgraed to Lion but now I can't get audio out of my HDMI. Any thoughts?
Using macbook pro 2011 OS Lion, connecting to Samsung HD tv via HDMI.

Hi tehrabyte. There are no Windows 8.1 drivers for your model on HP's driver site. This download has worked for a few people with audio issues when going to 8.1. Try uninstalling your existing audio drivers and reinstalling this driver. Please let me know if it works.
IDT High-Definition (HD) Audio Driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Split audio from hdmi

Similar Messages

Maybe you are looking for