Split audio output

Hi,I would like to play music for my friends from my Macbook and I need soft which can split sound output. So from iTunes sound will go to general out to speakers, and "que" sound from Quicktimeplayer or VLC to headphones connected to USB. Well anybody knows this kind of programs which can do that ?

well it sounds like something WireTap Anywhere or Audio Hijack Pro might do, you're going in a different direction, I believe, than they're used to. You might check with them.

Similar Messages

Premiere CS 5 - discrete split audio quick time outputs

I am a relatively new user to CS5. I have a background with Avid Media Composer and Final Cut Pro.
I need to send an edit of my movie to a music composer. The standard for this is to have the audio split in the Quicktime file - dialog and effects panned left; music panned right.
I can mix the tracks in Premiere this way but all the output settings - mono vs. stereo, etc - have all the audio tracks mixed into the L channel and the R channel.
After searching the forums and multiple outputs I don't think there is a way to do this in CS5.
A few questions:
1) is it possible to make split audio outputs in CS5?
2) CS5.5 has more features, especially to send to Audition - does CS5.5 do split audio w or w/out the use of Audition?
3) is this on Adobe development list?
4) is there a work around?
So far I really liked CS5 but not being able to make split audio outputs severely limits the ability of the product to be used in high end productions when you are dealing with sound houses and music composers who expect this to be standard.
Both Avid and FCP (the pre-X versions I've used) can do this.
Any advice?
thank in advance
-B

all the output settings - mono vs. stereo, etc - have all the audio tracks mixed into the L channel and the R channel.
Maybe I'm missing something here but, isn't that what you wanted? Two separate channels?

Split Track Audio Output Problem

I'm trying to make a split track audio output as one requirement of the deliverables list on my current job. Dialog goes left, music right.
But even though I set up my sequence as two track mono, and have pre-panned the tracks all the way to the left (A1) and right (A2), I seem unable to make a quicktime that will play them as discrete tracks.
Inside Premiere, they play back properly -- A1 is coming out of the left speaker, A2 out of the right. No bleed or overlap.
I'm exporting them as quicktime, 2 mono tracks, ProRes 422. But when I play back the resulting quicktime -- voila, the tracks have been re-mixed together without my consent!
I've tried Media Encoder, with the same results.
FYI, In the "Channel Layout" section I've tried clicking both "mono" and "discrete" without any improvement. I feel like the problem might be that I'm choosing "Stereo" from the "Channels" popup, but there is no option for two channels that are not in stereo. It goes from mono to stereo to 3.
Any suggestions would be most welcome. Especially if they arrive soon! : )
(Using Premiere Pro 2014.1 on a MacPro Quad Core 2.93GHz machine with 16GB of RAM.)

i'm experiencing the same issue since today.
very loud (nearly ear damaging) glitches on crossfades on audio channel. doesn't matter if mp3, aif, or wav.
plus one channel of stereo sometimes randomly gets louder on transitions for a short time.
is still there in export. no matter if directly from premiere or via media encoder. (export as prores 422 with uncompressed audio). disabled native ppro import in AME, didn't help
cleared all media caches and preview files, didn't help.
not using preview files for export.
read alot about this bug being in older version here on the forums, but it is still there in CC 2014 v8.0.1
i am on osx 10.8.5.
please help Adobe.

Apple TV2 missing analog audio output for multi-zone system

Found out the hard way that most receivers can't support digital audio in multiple zones (i.e., Zone 2). Since Apple TV2 (ATV2) dispensed with any analog output, if you have a whole-house system that depends on mult-zone to distribute audio to various speakers, you won't be able to use ATV2 to stream music to anything other than Zone 1. The only outputs are HDMI and optical (both digital audio). I think I found a work around (which, of course costs more money) which is a "de-embedding" device from Atlona that takes HDMI in and splits out the audio to analog and passes the HDMI through to the receiver. The analog audio output then lets me connect to the analog in on the receiver so it can stream to all zones. I figure Apple just didn't have enough real estate on the new product to make room for analog, but it's a pain. Hope this helps someone. If anyone knows a better work-around, I'd love to hear it.

I have the same issue with a MacMini I use for music. My solution was to use an inexpensive optical splitter - one feed to the optical input of my receiver and the second to a DAC. Then run standard RCA audio cables from the DAC to the analog Zone 2 inputs.
Here is a link for a DAC
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=6884&seq=1&format=2
They should have the splitter as well.

Is it possible to stream Video to Apple TV (via Beamer with no real audio output) and at the same time stream Audio to an Airplay compatible device? (Bose Soundtouch)

I currently have the following set-up:
Ipad Mini Retina (with Airplay)
Beamer without proper audio output (picobeamer)
Bose Soundtouch (with Airplay)
Apple TV (3rd Gen)
When I stream a video via the Ipad, I either have the sound on my Soundtouch or Video via the beamer. Is there an option to have both at same moment? It really looks like I cannot have both at the same moment?
Thanks in advance.

Welcome to the Apple Community.
Unfortunately, you can't split the Airplay stream as you would like to.

Split audio from hdmi

Hi there,
I'd like to replace my first gen Apple TV with a new one.
The problem is the lack of analog audio outputs.
Currently I connect to my tv with hdmi and to my hifi with phono plugs.
The new Apple TV only has hdmi and digital audio out which my hifi doesn't ....
Is there a way I can split the audio out of the hdmi so I can play iTunes through the hifi with the TV switched off?
Cheers Lizardpoint

I'm not aware of any cables that split audio from HDMI and in any case it would still be digital audio. You might want to think about one of the items below and use the optical cable.
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Optical audio output jack

Just purchased this new desktop and am running the audio output out throught the optical audio output jack into my surround sound receiver, AWESOME! Wanted to know if I could connect an optical audio splitter to this jack and split the audio output of the computer into TWO separate receivers?
This question was solved.
View Solution.

There are SPDIF/Tolink splitters out on the market... here is an axample.
http://www.amazon.com/ViewHD-Toslink-Optical-Splitter-VHD-TS1X3/dp/B00G191YL8
( I am an HP Employee )

IPhone Audio Output vs. MacBook Pro

I've been the owner of the Apple In-Ear Headphones for a while now, and have experienced an improvement in the sound quality between the in-ear and standard iPhone headphones.
However, I've recently been using the same in-ear headphones with my MacBook Pro, and noticed a significant difference in the quality, depth, and volume of the sound. When playing the same songs on my MBP, the headphones are capable of much louder volumes, much clearer audio, and are much bassier than when using my iPhone 3G S, yet the audio tracks are identical.
Is there any specific reason why my iPhone isn't capable of matching up to the quality of my MBP?
Many thanks

I wanted to chime in after my latest show-down between my iPhone 5 vs. iPad 3 vs. MacBook Pro 2010. My medium of choice is vinyl for hi-fi listening, but otherwise I prefer Spotify @ 320kbits.
I plugged them into my hi-fi system: rega brio-r amp, wharfedale diamond 10.1 speakers, standard [decent quality] 3.5mm to RCA cord to plug in each device. No DAC in my setup. No cable splitting-- all directly plugged in.
I used the latest Arcade Fire album, Reflektor, 320kbits from Spotify. I think the album has enough dynamic range to make it a good test subject. I started the test on track 2, that song in particular having a lot of dynamism.
The breakdown:
Iphone5 and iPad3 both sounded identical. Everything sounded good on first pass until I plugged in the MacBook Pro. The MacBook revealed an enormous difference in better audio quality! The MacBook output crystal clear highs and the lows also had a "thump" that the iPhone/ipad did not have. That difference right there showed that the MacBook is simply capable of handling a higher spectrum of sound. With a higher spectrum, and the ability to differentiate the highs, mids, and lows helped give the sound much more dimension.
Bottom line:
I wish I could turn back the clock on all those hours I spent listening to my iPhone. Without a doubt, the MacBook Pro has a much higher quality audio output. I think this is attributed to the fact that the MacBook actually has a SOUNDCARD while the iPhone/ipad both have like integrated circuit boards. It's the dedicated soundcard on the MacBook that gives it its advantage.
To break it down to hi-fi thinking, when a stereo has separate modular components that are dedicated to doing 1 thing well, there is a better opportunity for higher quality sound. That would be in comparison to an "all-in-one" unit that crams a lot of electronics into a single "stereo" system. Generally, the overall quality of the "all-in-one" will be hampered by what are basically the limitations of engineering and production; each new component/feature they cram on the same circuit board compromises the overall integrity of the whole. What I'm trying to say is that the MacBook is more like a modular setup with dedicated components, and the iPhone/ipad are the "all-in-one".

Combined optical digital audio output/headphone out

What is the "combined optical digital audio output/headphone out"? This is what the output is called that has the earphone picture beside it on my MacBook. I thought this meant that it could take the mini jack out that splits into a/v - yellow, white, red, and plug it into any tv or monitor that has those inputs. I tried it just now, but a no go.
If the only way to get video is through the mini DVI output what does the "Combined optical digital audio output/headphone out" mean? If I can get video out of it, how can I do it?
Thanks!

Hi Trevor Deck: As you have discovered this does not output as a video signal. That jack is strictly for audio. The "optical" portion of it is used to output using a "Toslink" cable to provide "optical audio" to an external amplifier. The DVI port needs to be used to get a video signal to your TV. But be warned if you use the red, white, & yellow method of hooking up the video signal you will probably be disappointed. If your TV has a HDMI or PC input it would be much better. You would then have to get the proper DVI to whatever type adapter.
Good Luck
Stedman
MBP 1.83, 1.5gB RAM Mac OS X (10.4.9) Quiet, Cool, Re-furbished, iPod mini, iPod shuffle

Asrock ION330/Nvidia HDMI - No audio output

Machine was running archlinux and not been upgraded in over 6mths but HDMI audio worked fine. Decided to do a scratch build since all the changes in that time and have a nice clean system.
If it helps, this is what I install. Ssed this exact same install process for another Asrock ION330 and Acer Revo3610 (both same hardware) but neither use HDMI at all. Both VGA with either optical or analog audio. Both work with no additional config.
pacman -Sy nfs-utils screen ntp alsa-utils mlocate xorg-server xorg-xinit xorg-server-utils mesa nvidia ttf-dejavu xfce4 gamin slim mythtv unrar lirc xbmc wget
Get no sound output but also zero errors on any of the following commands. I should add that the receiver does not detect any audio coming in, ie it usually identifies how many channels of audio and type it is receiving.
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -Dhdmi:NVidia -c 6
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Output of devices and modules:
[root@lounge ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@lounge ~]# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
[root@lounge ~]# lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_via 38667 1
snd_hda_intel 27668 0
snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
Tried a couple different things either from the wiki or google searching, individually with a reboot between but no change.
# Keep snd-pcsp from being loaded as first soundcard
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=-2
# something i used on the old working system, doesn't help but not sure why I did it
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=2
#no modprobe conf, try wiki
vi ~/.asoundrc
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
Here is the output of alsa info script (http://www.alsa-project.org/main/index. … p_To_Debug) with all defaults, ie no modprobe changes etc.
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Fri Mar 1 02:42:57 UTC 2013
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.60
!!Kernel Information
Kernel release: 3.7.9-2-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.7.9-2-ARCH
Library version: 1.0.26
Utilities version: 1.0.26
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 21
!!PCI Soundcards installed in the system
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 1849:0397
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: VIA VT1708S
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11060397
Subsystem Id: 0x18490397
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="VT1708S Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Control: name="Input Source", index=0, device=0
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19036: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x6
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Control: name="Line Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x0181303e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x42a190f8: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x503701f7: [N/A] CD at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel
Conn = Optical, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x25
Codec: Nvidia MCP79/7A HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0007
Subsystem Id: 0x10de0101
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 8 Mar 1 13:41 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Mar 1 13:41 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Mar 1 13:41 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 5 Mar 1 13:41 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Mar 1 13:41 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Mar 1 13:41 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Mar 1 13:41 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 1 Mar 1 13:41 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 1 13:41 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 1 13:41 .
drwxr-xr-x 3 root root 240 Mar 1 13:41 ..
lrwxrwxrwx 1 root root 12 Mar 1 13:41 pci-0000:00:08.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21'
Mixer name : 'Nvidia MCP79/7A HDMI'
Components : 'HDA:11060397,18490397,00100000 HDA:10de0007,10de0101,00100100'
Controls : 43
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line' 'Stereo Mixer'
Item0: 'Mic'
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Surround Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Center Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.6 {
iface MIXER
name 'Center Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.7 {
iface MIXER
name 'LFE Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.8 {
iface MIXER
name 'LFE Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'PCM Playback Volume'
value.0 25
value.1 25
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 300
dbvalue.1 300
control.10 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.11 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.15 {
iface MIXER
name 'Input Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Line
item.2 'Stereo Mixer'
control.16 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.17 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.18 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.19 {
iface MIXER
name 'Line Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.20 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3075
dbvalue.0 0
dbvalue.1 0
control.21 {
iface MIXER
name 'Smart 5.1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.22 {
iface MIXER
name 'Dynamic Power-Control'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Master Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.29 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.31 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.32 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.33 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.34 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
comment {
access read
type INTEGER
count 6
range '0 - 27'
control.35 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.36 {
iface PCM
name 'Capture Channel Map'
index 1
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.37 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.38 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.39 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.40 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.41 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.43 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access read
type INTEGER
count 8
range '0 - 27'
--endcollapse--
!!All Loaded Modules
Module
nfsv4
auth_rpcgss
nvidia
snd_hda_codec_hdmi
ir_lirc_codec
lirc_dev
joydev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
hid_generic
ir_jvc_decoder
usbhid
ir_nec_decoder
snd_hda_codec_via
hid
mceusb
rc_core
snd_hda_intel
i2c_nforce2
i2c_core
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
forcedeth
snd
soundcore
shpchp
pci_hotplug
evdev
psmouse
mperf
serio_raw
pcspkr
button
processor
wmi
coretemp
microcode
nfs
lockd
sunrpc
fscache
ext4
crc16
jbd2
mbcache
usb_storage
sr_mod
cdrom
sd_mod
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x410110f2
0x1a 0x01a19036
0x1b 0x0181303e
0x1c 0x01014010
0x1d 0x422140f0
0x1e 0x42a190f8
0x1f 0x503701f7
0x20 0x074511f0
0x21 0x474411f0
0x22 0x410160f1
0x23 0x410120f4
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560110
0x07 0x58560121
0x09 0x58560122
0x0b 0x58560123
0x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
[ 6.093571] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.093614] hda_intel: Disabling MSI
[ 6.093710] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.743392] IR keymap rc-rc6-mce not found
[ 7.150166] Disabling lock debugging due to kernel taint
[ 7.450271] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
[ 7.450581] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
[ 7.450836] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 7.451099] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.453217] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
FWIW, I even tried changing the HDMI cable, turning the amp on before or after the PC etc. No change.
Last edited by dave00 (2013-03-01 03:03:42)

Default install, clean boot and I get this error but the info above indicates there is a sound device. Confused!
[root@lounge ~]# systemctl status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Fri 2013-03-01 18:01:19 EST; 1min 2s ago
Process: 241 ExecStart=/usr/sbin/alsactl restore (code=exited, status=19)
Mar 01 18:01:18 lounge systemd[1]: Starting Restore Sound Card State...
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
[root@lounge ~]# systemctl status alsa-store.service
alsa-store.service - Store Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
Active: inactive (dead)
Mar 01 13:41:03 lounge systemd[1]: Started Store Sound Card State.
Mar 01 13:45:54 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 13:45:55 lounge systemd[1]: Started Store Sound Card State.
Mar 01 14:04:19 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:25:11 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:25:11 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:39:05 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:39:05 lounge systemd[1]: Started Store Sound Card State.
Mar 01 18:00:51 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 18:00:51 lounge systemd[1]: Started Store Sound Card State.
Journal
Mar 01 18:01:19 lounge kernel: hda_intel: Disabling MSI
Mar 01 18:01:19 lounge kernel: snd_hda_intel 0000:00:08.0: setting latency timer to 64
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
Mar 01 18:01:20 lounge systemd[1]: Started Linux Infrared Remote Control.
Mar 01 18:01:22 lounge kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
Mar 01 18:01:22 lounge systemd[1]: Starting Sound Card.
Mar 01 18:01:22 lounge systemd[1]: Reached target Sound Card.
Edit: Am I correct in saying that the issue is because alsactl restore is running before the sound card?
Last edited by dave00 (2013-03-01 07:30:12)

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Is there a fix for Mountain Lion audio output settings after the laptop goes to sleep and wakes back up?

Mac Book Pro running Mountain Lion OS X 10.8.5 after the notebook sleeps audio and video does work (for example on YouTube). I have been able to temporarily work around this by toggling the settings on Built-in Output in Audio Midi Setup, Audio window between 2ch-20bit Integer and 2ch-24bit Integer. But this is a temporary fix until the laptop sleeps again.
When it's not working, all system sounds (emails "dings", delete file "swish", etc.) are silenced, and video playbacks on YouTube and elsewhere freeze and have no audio until the Audio Output settings are toggled then they all immediately start working.
Has anyone encountered the same? Have a long term fix for this annoyance?
I cannot upgrade the OS to 10.9 Mavericks yet because of a corporate policy - there is some conflict with 10.9 and our corporate VPN connection.

Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Help! No Audio output In Logic Express 7

I have been running logic 7 Express with a MOTU Traveler for over a year now (with very few problems), and just this morning i have encountered a very puzzling problem. When i opened the song i was working on last night, i found that there was no audio output--just intermitant digital beeps at very high pitches (10-15k). i tried opening other songs; same problem. this problem does not occur when using the built in audio driver, so i was thinking it must be a hardware issue, but iTunes seems to output as per usual THROUGH THE MOTU so i'm really scratching my head here. hard drives etc seem to mount so the firewire port seems to be ok. i'm getting the same results (no audio playback and high digital pitches in Quicktime and Live as well...
has anyone with this setup ever experienced anything like this???!!!
thanks for reading,
dave
PowerBook G4 12" Mac OS X (10.4.6) 1.33 GHz, 1.25gb ram, MOTU Traveler

Check you preferences in LE for what you have selected for output. Also, and I am not 100% sure, because for me this is always already set, make sure each track has Output 1-2 on the channel strip. On my setup, I have my Tascam US-122 set for both input and output, then my monitor system is connected to the US-122. Now I don't recall which, but I think it was Logic that wants both input and output to be the same device. I am pretty sure, because I know I have used both in GB. Also, on my US-122, there's a switch for mono, so my recording comes in both speakers, as well as a direct monitoring switch, with a separate volume control, so I can balance my recording with the tracks I am playing to, to my liking. I am not familiar with your unit, but I'd think it'd have some similar features. Hope this helps some, anyway.

Help! No Audio Output device is installed

My speaker in bottom right for My sound say "No Audio Output Device Is Installed" and i have tried to go through many things to solve such as go into device manager and enable or update through there etc...to no avail.
I stumbled across a thing that worked for most people. Recovery Manager. but. I don't have it on my computer to try so i have no other options to turn to. Can someone please help on how to fix this issue

Dear Customer,
Welcome to the HP Consumer Support Forum!!
To isolate the issue please perform the steps below:
1. Restart the computer.
2. Check the Sound icon in the taskbar.
3. If the icon has an X in the lower corner, click the Sound icon in the taskbar or
4. Right-click the icon, and then click Troubleshoot sound problems.
5. The audio troubleshooter checks for sound problems. When the troubleshooter finishes, it displays the results.
6. If the computer has sound, the issue is resolved.
Install Original Realtek High Definition Audio Driver from the link below:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5000-Desktop-PC-series/3942804...
From the above link click on Driver-Original > Original Realtek High Definition Audio Driver > Download and install the same.
In case the issue still persists and if the audio was working fine earlier, you may perform system restore to previous working condition using the steps mentioned in the link below:
http://bertk.mvps.org/html/restoresysv.html
Hope this helps, for any further queries reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GR1
Although I am an HP employee, I am speaking for myself and not for HP

Split audio output

Similar Messages

Maybe you are looking for