Split/change line in Purchase Order after partial goods receipt

Hi
I have a PO with multiple lines/items. For one line there has been a partial goods receipt and for the open qty there will be a delay. Do I have any chance to either:
- Change the delivery date for this row to match the ETD of the open qty
- Change the initial qty of the line to the one received (that the line closes) and open a new line with the correct date for the open qty
I just cant change anything in a line for which a partial goods receipt has been posted.
Thanks
Franz

Hi Gordon,
Thanks for the info. Another idea: How about ..
- adding the item on a new line with the open qty and the correct date
- simply closing the partially posted line with the open qty (is that ok from the DB view?)
Any doubt that this could work as intended?
Thanks
Franz

Similar Messages

Unable to update purchase order after partial delivery

bold Issue:
After upgrading from v2005 > v2007:
1) We created a PO with two different purchase items :
row 1: 10 pcs Item x
row 2: 15 pcs item Y
2) create a Goods Receipt PO based on the PO row 2 (15 pcs Item Y) so this row will be closed in the PO.
3) after saving the GRPO item Y is set as a non purchase item (deselected the tick box "Purchase Item" on the Item master), because the supplier will not be able to deliver this item again.
4) After changing item Y, we want to update the amount of Item X to for example 11 (instead of 10). This item is still a purchase item > while updating the PO the following error appears:
[Purchase Order - Rows - Item No.][line: 2] , 'The item is not a purchase item (2)' [Message 131-10]
In v2005 it was possible to follow the above procedure, however since the upgrade of v2007 the error appears.
The problem is that that it happens very often that the suppliers change the items, so they cannot be delivered anymore.
bold Below the response of SAP Support:
Line: -
Yes, I understand what you mean that the item you want to deliver is the other item PQ which is still a purchase item. However, the system does the checking based on document level, and not filtering only per Open rows. Hence, even if the item for B8 is fully closed, the system still detects that there is a non-purchase item in an open document (B8).
In order to update the other item PQ, please set the item B8 back to Purchase Item. Once the Sales Order is updated, you may update B8 again to Non Purchase.
If the possibility of using the 'Active/Inactive' button is not possible, another workaround is to use a User Define Field to flag the item. For example, you can set it as 'Y', when the supplier stopp ed selling the item. Then, in the Item Search window, you can filter the records to group those items that are set as 'Y' and the rest as 'N'. Only those 'N' items can be used when placing orders.
As an added procedure, you can generate an approval procedure that will be triggered when an item that is set as 'Y' in the User Defined field is added in the Purchase Order. When the approval is trig gered, the user can then re-verify the items added and make the necessary changes before saving the purchase document.
I hope the above workaround is suitable. I agree with the expected logic, but per Note937297, the stock status of an item is not meant to be changed after documents are added in the system. It seems a limitation in the current system.
Line: -
bold Solution:
The system should check if the open row can be delivered, since it still is a purchase item.
The provided workarounds are not an option for our customer, so we are looking forward to a positive reaction!
Kind regards,
Charlotte

Unable to update purchase order after partial delivery
Issue:
After upgrading from v2005 > v2007:
1) We created a PO with two different purchase items :
row 1: 10 pcs Item x
row 2: 15 pcs item Y
2) create a Goods Receipt PO based on the PO row 2 (15 pcs Item Y) so this row will be closed in the PO.
3) after saving the GRPO item Y is set as a non purchase item (deselected the tick box "Purchase Item" on the Item master), because the supplier will not be able to deliver this item again.
4) After changing item Y, we want to update the amount of Item X to for example 11 (instead of 10). This item is still a purchase item > while updating the PO the following error appears:
[Purchase Order - Rows - Item No.][line: 2] , 'The item is not a purchase item (2)' [Message 131-10]
In v2005 it was possible to follow the above procedure, however since the upgrade of v2007 the error appears.
The problem is that that it happens very often that the suppliers change the items, so they cannot be delivered anymore.
Below the response of SAP Support:
Yes, I understand what you mean that the item you want to deliver is the other item PQ which is still a purchase item. However, the system does the checking based on document level, and not filtering only per Open rows. Hence, even if the item for B8 is fully closed, the system still detects that there is a non-purchase item in an open document (B8).
In order to update the other item PQ, please set the item B8 back to Purchase Item. Once the Sales Order is updated, you may update B8 again to Non Purchase.
If the possibility of using the 'Active/Inactive' button is not possible, another workaround is to use a User Define Field to flag the item. For example, you can set it as 'Y', when the supplier stopp ed selling the item. Then, in the Item Search window, you can filter the records to group those items that are set as 'Y' and the rest as 'N'. Only those 'N' items can be used when placing orders.
As an added procedure, you can generate an approval procedure that will be triggered when an item that is set as 'Y' in the User Defined field is added in the Purchase Order. When the approval is trig gered, the user can then re-verify the items added and make the necessary changes before saving the purchase document.
I hope the above workaround is suitable. I agree with the expected logic, but per Note937297, the stock status of an item is not meant to be changed after documents are added in the system. It seems a limitation in the current system.
Solution:
The system should check if the open row can be delivered, since it still is a purchase item.
The provided workarounds are not an option for our customer, so we are looking forward to a positive reaction!
Kind regards,
Charlotte

Report with open Purchase orders and open Goods Receipt (without invoices)

Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.

Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik

Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

Hi Experts
I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
Please share.
Regards
Sandeep

Hi Ritesh
Thanks for your reply,
I checked both of these transaction we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
In PO VC configuration is called for class type-300 and in GRN VC configuration is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
yes we have activated Mill Functions in our ERP box.
Regards
Sandeep

Purchase orders pending of goods receipt.

Hello,
Is it possible to obtain the list of Purchase orders pending of Goods Receipt?
I need to know the third party P.O pending of goods receipts.
Is there any program?
Thanks in advance,
Ricard.

Hi oscar
You can list of Purchase orders pending of Goods Receipt by Tcode ME2N and select field
Source of list - ALV
Selection parameter - WE101
As per your requirement Assign Plant and Compnay code.
Just execute.
it list list all po whose gr is pending
Regards,
Vraj

EKET-FIXKZ set after partial goods receipt of subcontract delivery schedule

Dear all,
when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the new requirements.
I have tested to change the fixing indicator via SE16 and the next MRP run will then replan the sub contract delivery schedule correctly. But this is no solution.
Is there a way to modify this setting via an EXIT or BADI in MIGO ?
Many thanky for your help
Rabanus Diehl

Dear all,
when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the new requirements.
I have tested to change the fixing indicator via SE16 and the next MRP run will then replan the sub contract delivery schedule correctly. But this is no solution.
Is there a way to modify this setting via an EXIT or BADI in MIGO ?
Many thanky for your help
Rabanus Diehl

How to copy characteristic values from Purchase Order to MIGO Goods Receipt

Dear all,
I have a configurable material X,
then i create a purchase order for that material and then i input characteristic value in the Purchase Order transaction and save it
However when i do the Goods Receipt transaction via MIGO and using the Purchase Order number that i have created, after i entry the batch number and want to check the classification, the characteristic value are blank, so it is not copied from the Purchase Order
I've tried guide from
http://help.sap.com/saphelp_erp60_sp/helpdata/en/92/9b4a23a46411d6b28300508b5d5c51/content.htm
but i do not find the configuration for copying rule
Is there any one who can resolve this problem??
Regards,
Marufat

Hi,
You define the copying rules for a movement type in Customizing for Batch Management under Batch Valuation , Valuation for Goods Movement in Inventory Management , Activate Batch Classification for Goods Movements in IM. Please refer below link. Thanking you.
http://help.sap.com/saphelp_me52/helpdata/EN/47/39867251500aa7e10000000a114a6b/content.htm

Goods-Receipt Block for Purchase Order depending on Goods-Receipt Date

Hi,
I want to set up the system so it can block the Goods-Receipt for Purchase Order respectively Scheduling Agreement if the Goods Receipt is about to take place 30 days or more before the Desired Delivery Date.
For Example: If I have a Purchase Order with the desired delivery date 30.09.2008. I want to set up the system so, that it bans (forbids) the Goods Receipt before the 01.09.2008.
If possible I would want to do that without additional programming. Is it possible to set up the system using only customising settings?
Thanks for your help
Bogdan

Hello Marius-Bodgan,
as this question is marked answered I assume you have received an solution for your requirement. Could you please share the solution with me by posting it here? I have the same requirement and did not find any possibility to do this in customizing.
Thanks in advance,
Emanuel
Found the solution in thread Re: Goods Receipt
Edited by: Emanuel Penalver on Jul 15, 2008 11:48 AM

Final delivery indicator unset after underdelivery good receipt.

Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to set the final delivery indicator to close some purchase orders with underdelivery quantity.

Alejandra,
You can advise your user that the delivery completed indicator is not designed for this purpose.
If the user wishes to prevent further receipts against a Purchase order, for any reason, he should block the item rather than rely on the DC indicator.
ME22N for the order, select the item; hit the 'lock' icon; or Edit>Block.
This transaction is reversible.
Regards,
DB49

Change of Purchase order after Goods Receipt

Hi Guys,
Can the Purchase order be changed after the Goods Receipt??
If then what is the transaction Code used or what are the steps followed for the change of PO after GR(goods receipt)???
Regards
Jino

Sir,
It's not possible to change the PO for specifica line item if GRN exist against it..
Pl revese the GRN and then ammend the PO in terms of quantity or price or delievery schedule..
The Relase strategy for PO will get affected..
Typical exception..
In certain cases it can be seen.
The GRN exist for line item..
The ammedndment done in TAX breakup resulting in derelease of PO..
and again PO has been release..
So Sir,
If the changes is in terms of quantity then pl reverse the GRN..
Otherwise go for ammndments,,with the pending GRN..
Edited by: nj on Jun 9, 2009 8:46 AM

How to block changes in purchase order after purchase release

Dear all
Can u please tell us how to block any changes in purchase order after purchase order is released...
(We don't want any line items addition or quantity addition or any changes once purchase order is released..)We wanted this for a particular purchase order type only
Regards
Sudha

Dear Sudha
Yes it is possible to confiquire your system insuch a way where once if the PO gets final relase then it cannot be changed.Only possiblity that will be available for the user to make chanegs in PO is possible when the final release is to be reset and then make the changes.
Release Indicator: specicfies whether the PO documents is blocked or can be processed for the follow functions.
You can define the release indicators you need for your release procedure:
The Released indicator is used to specify whether messages (PO documents in output format) may be transmitted for a purchase order with this indicator.
The Changeability indicator shows the effect of changes to the PO (a change to a PO may require a new release strategy to be determined, for instance).
By means of the Value change indicator, you can specify that the release strategy is to be re-started if a PO is changed and the value of a PO item thereby increases by a certain percentage (e.g. 10%). Set the Changeability indicator to "4 - Changeable, new release in case of new strategy or value change" or "6 - Changeable, new release in case of new strategy or value change/outputted" and enter a percentage in the Value change field.
And after that you can specify release statuese where you can specify which release indicator/status a PO is to have after having been released via a certain release code.
and after release simulation .
Test for the PO change after final release System will not allow you tomake changes by giving the message that the release indicator doesnot allow you make the changes in PO.
Regards
Sunny

Retrieving the Change Texts per Line Item (Purchase Order) - Very urgent

Hi,
How do you retrieve the Change Texts per Line Item (Purchase Order).
Table T166T does not list these values per line item.
Please help. This is very urgent & important.
Best Regards,
John

if you are lookin out for change of item texts ...
then use the function module ... READ_TEXT.
and 2 tables r used ... STXH and TLINE ....
double click on item data ...
goto PO TEXT tab ....
double click on text ...
from menu ...
goto header ... u'll get 4 fields that u need to consider ...
TDID
TDOBJECT
TDHEAD
TDNAME
ALL THESE U'LL FIND IN STXH
ITEM TEXT is stored in TLINE
Edited by: anjali rana on Mar 5, 2008 4:55 AM

How to block post price conditions in purchase order after doing MIGO

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

Reset Release Strategy for any change in the Purchase Order

Hi,
Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
If so, where do we need to make the configurations.
I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
Thanks in Advance.
S.Raghavan

hi sandesh,
sorry, i know it's too late.
i tried your suggestion, it works blocking the purchase order after release strategies are setted.
sandesh, raghavan:
i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
regards
f

Any event which is raised when we save Purchase order after creating a new?

Hi
I need to know any event which is raised whenever we save a purchase order after creating a new one. I know event 'change' of object type BUS2012 is raised whenever we change a PO. Please help in this regard.
Regards
Swetabh

Create event doesnt exist in BUS2012.check if custom business object exists for this by using 'where used list',probably it may have created event.

Split/change line in Purchase Order after partial goods receipt

Similar Messages

Maybe you are looking for