Split channel sound after nesting advice please!

I have a edited seq of which I have nice steroe split sound, one camera track the other lapel mics so
I can easily kill the camera track and just have lapel mic when needed, on both channels etc,
I have nested the seq and the sound on the the new nest is now, still 2 channels bt a more mono mix down ie the lapel and the camera mic have mixed together on the same channel twice,
does anyone know how to in the nested sequence sperate them again so I can have the lapel mics on channel 2 and the camera mic on channel one again please, I have looked at seq settings and changed some things but nothing changed, I also took a look at the audio too, so nothing obvious there,
Regards
Daz

If your tracks are a stereo pair select them and click "OPTION L" This will unlock the two channels and you can then load them into the viewer and pan one channel to the left and the other to the right using the PAN Slider.
rh

Similar Messages

  • I have no sound after HP update. please help

    I have no sound, it states " no audio output device is installed"

    Renia,
    Apparently the issue is not on the list of issues that test program can detect.  Sometimes it works -- this time it could not see the problem.
    Try this:
    Perform the Hard Reset .  Boot the computer and log in
    The procedure will not wipe out your data -- this is just a driver refresh to force the computer to read the drivers and software from the Operating System that is installed on your computer.
    That may do it.
    ===========================================================================================
    You said the problem arose after an Update.  You can try "going back in time" to when the sound worked:
    Restoring Windows to a Previous Point (Windows 7
    Using Microsoft System Restore (Windows 8)
    System Restore sometimes works better if you first drop the system into Safe Mode:
    HP PCs - Windows 8 Safe Mode
    ===========================================================================================
    You may have to resort to uninstalling and then reinstalling the audio driver.
    Control Panel > set icon view >  Open your Audio > right click on your audio driver > select Uninstall
    Restart the computer and log in.  As you do so, the driver will reinstall itself.
    More tips are outlined and explained in the guides provided earlier.
    Kind Regards,
    Dragon-Fur

  • I am having problem with my sound, after i updated to ios 6, apple please help

    i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • IGMP Problems - various - Help & Advice please!!!

    I have BT infinity. In August when sports deals were announced I decided to get a vision box, never previously had one. From the start i experienced various problems, sports and multicast channels intermittently working. Only getting every other channel, losing channel after 4 and a quarter minutes, and the info bar randomly flashing up frequently.
    We have had this fault outstanding with BT since then. During this time we have had a new vision box (with 512 of ram instead of 256), our Home Hub 3B (known ethernet problems) was swopped by BT for a Home hub 3A. The vision box to the hub is hardwired (ethernet cable also changed).
    We have spoken at length to various BT technical support members, all giving us different opinions and advice. One spoke to us last week and advised us to remove all other wired PC's from the hub and reset the hub yet again. (previously we had 2 Pc's wired to the hub).
    Since we removed the PC's the vision has been working well, better than we have ever had it. We decided to connect one of the PC's back to the hub a few days ago and the problem has returned. We reset the hub and disconnected the PC and the vision was alright again. Today we have connected a different PC and the problems are back.
    The last technical person said it was IGMP (internet group management protocol) which was probably causing the problem. we are wondering if this is caused by the vision box (would a youview box instead help?) or changing the hub (would a hub 4 or  5 help).
    Has anyone got any experience or advice please. This has been a real headache. Its been a long slog being passed around from person to person and have to repeat everything over and over and be told to reboot things we have done many times before.
    Thanks in advance. M

    This sounds similar http://community.bt.com/t5/BT-Vision/Multicast-VMC011-after-4-min-16-sec/m-p/1083966#M55445
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • New System Build feedback/advice, please...

    Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
    I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
    Purchase date: this week
    Budget:  I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more  research, my inclinations are trending higher.
    System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and  Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
    Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
    Parts to Upgrade: Full system build
    O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
    Vendor: Newegg unless I can save big $$ else where. I like B&H.
    It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
    Any advice is appreciated. Thank you for your expertise.
    Processor:
    Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
    $299 w/ship
    http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
    or
    Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
    $569 w/ship
    http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
    Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
    Mobo:
    MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
    $218 w/ship
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
    or
    ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    $240 w/ship
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
    or
    MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
    $380
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
    I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
    Memory:
    G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
    $130
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
    Hard Drive:
    SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
    $160
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
    Video:
    GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
    $160 w/ship
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
    or
    MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
    Item#: N82E16814127696
    $300
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
    I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
    Optical Drive:
    LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
    $70
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
    Case:
    COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
    $60
    http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
    Power Supply:
    FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
    $90
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
    Total     $1190
    or    $1760
    I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
    Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.

    Alex,
    I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
    I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
    What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
    - robust, runs and never fails
    - has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
    - quiet; who wants to be doing creative work with any server room like wind noise
    Now let me be specific where you are simply WRONG WRONG WRONG:
    You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
    Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
    Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
    Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
    You stated: "Full towers - in themselves - are worse for cooling"
    Fact: That is one crazy indefensible statement!
    I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
    Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
    Regards,
    Jim

  • No sound after recording but i see the notes on Logic

    No sound after recording with my Keyboard. My keyboard make the sound when i record it but after there is no playback i see the notes on Logic but nothing. And if i try to copy or cut and paste the part i record from the keyboard it work after..i really don't understand!

    Does it say Midi Ch 1 in the event list for the Midi region you recorded?
    This is most likely to be User error... but to identify what exactly.... and to rule out any corrupted settings in LPX..
    Try trashing Logic's preferences and CS prefs as per this support note.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    if that doesn't fix things then...
    Which Software instrument (SI) are you trying to play?
    You do have a SI loaded in yes?
    You are using an Instrument Track yes?
    You are not usimg an external Instrument track are you?
    If you drag an Audio loop from the loop browser to an Audio track.. can you hear sound on playback?
    Please post a screenshot of your arrange window showing the channel strip for the track you recorded midi to... That will help us see how you have set things up.

  • Mono Sound after opening an iMovie HD-Project in FC Express HD

    I captured HD-Material in iMovie. There it works in stereo. Now i just got mono sound after opening my iMovie HD-Project in FC Express HD. If i play the timeline, the sound of my HD-Clips is mono, all track-settings seamed to be on default mode. If i click one of the clips in the browser-window, i can see and hear the clip in the viewer in stereo. So the clip-material must be okay. Rendering the movie clips and audio clips in the timeline doesn't work. Connecting the clips with the original bin, doesn't work too.
    I need help! Could you help me?
    PowerPC G5, Dual 1.8 GHz   Mac OS X (10.4.2)  

    That's not right. Stereo here means the same sound split between two channels. When you open it into the viewer you see two audio waveforms in one display. They can be different, but they don't have to be. Dual mono means you have two separate tracks with different sound coming out of each speaker. In dual mono you have two separate tabs, one for each track, each of which can be controlled separately and have separate audio. That's the default capture condition for FCE. If you have separate tracks of audio in iMovie, two mono tracks attached to the video, they may not be preserved when they come into FCE. Do your clips have two separate, mono tracks of audio in iMovie? What happens to the clip when you open it from the browser into the viewer? Is it two mono tracks, or a stereo pair?

  • No sound after upgrading

    I keep losing the sound after upgrading to OS7 on my 16g 4GS. It comes and goes with no identifiable pattern.

    According to your motherboard specification you have Integrated AC97' Realtek ALC658C 6-channel audio.
    Try installing the Vista driver directly from Realtek:
    http://www.realtek.com.tw/downloads/
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • HD Channels freeze after 5 minutes

    Since the launch of BT sport my HD channels including new BT sport freeze after about 5 minutes.  Help suggests I restart Home Hub and BT vision box. This gets the system going for the next 5 minutes.  Note this is the behaviour whether accessing BT sport or BBC1 HD.  I can actually get the channel to unfreeze by simply changing channels so its not really necessary to reboot all the boxes.  Unfortunately this approach does not work when trying to record your favourite football team.
    Other details: BT Vision box is connected to Home Hub by powerline adaptors and I often get a message with error VMC999 complaining of a slow connection. 
    What is particularly irritating is that I have a new Samsung smart TV which displays all HD channels perfectly (via Freeview) and seamlessly streams HD on demand content by connecting wirelessly to the BT router.
    I have made two attempts this week to contact BT (0800...) but abandonned them as there are'nt enough hours in the day. 
    So what I propose do is to "enjoy" my "free" BT sport channels (I have infinity account), cancel my BT Vision subscription (if BT ever pick up the phone) and subscribe to Netflix, Blinkbox, etc.
    If anyone has any practical or technical suggestions please comment.
    Mike

    sleekstone wrote:
    Since the launch of BT sport my HD channels including new BT sport freeze after about 5 minutes.  Help suggests I restart Home Hub and BT vision box. This gets the system going for the next 5 minutes.  Note this is the behaviour whether accessing BT sport or BBC1 HD.  I can actually get the channel to unfreeze by simply changing channels so its not really necessary to reboot all the boxes.  Unfortunately this approach does not work when trying to record your favourite football team.
    Other details: BT Vision box is connected to Home Hub by powerline adaptors and I often get a message with error VMC999 complaining of a slow connection. 
    What is particularly irritating is that I have a new Samsung smart TV which displays all HD channels perfectly (via Freeview) and seamlessly streams HD on demand content by connecting wirelessly to the BT router.
    Did you manage to try using an ethernet cable rather than the power line adapters (PLA's)? Did this solve the problem? As others mentioned the PLA's are probably causing the VMC999 error. You need a reliable connection to the Vision+ box for the multicast channels to work smoothly. Being live channels they have to work in a slightly different way to on-demand content.
    If after trying a cable you still get the multicast channels freezing after approx 5 mins every time you try to view/record them then you are not the only one. In that case I suggest you read this thread I created a while back. I got it fixed for my line, but it still seems to be affecting some customers now. Get your stopwatch out!
    http://community.bt.com/t5/BT-Vision/Multicast-VMC011-after-4-min-16-sec/td-p/871660

  • No sound after upgrading to Windows 7 M55-S3293

    I upgraded to Windows 7 and installed the drivers from Toshiba for my sound card and before installing checked the windows XP box under the compatibility tab.  No sound.  I did windows update for this driver and it installed an updated driver.  No sound.  I went to Realtek and installed the windows 7 generic driver for this sound card (thats all manufacturer's offer is a generic driver) and LOW sound.  Now I rebooted and back to No sound. 
    Before windows 7 sound, after no sound. 
    Toshiba put out a fix for a contextant audio driver for the low sound problem to be corrected with windows 7 but I cannot find anything for my computer. 
    I don't know know what to do!  I don't want to go back to using XP but sound is REALLY important.  I would think this is an integrated sound card (Toshiba isn't making service manuals public anymore, it was there the other day and gone today) so I cannot remove it.  I don't think I have any available PCI slots to install a new one internally and I don't want extrenal speakers since I do a lot of traveling.  
    Is there a fix I don't know about?  What can I do?  Please HELP!!!

    Hi Ryan,
    Go here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=1671893&pf=true
    and download the software called "Sound Utility to Turn Mute Off After Upgrading to Vista", it is made for people that upgrade to VISTA, however, once you have all your Toshiba updates installed by downloading the Toshiba updates, then apply this update to your Windows7 system and the problem will resolve.
    I don't know why they did not make this update part of the Toshiba Update Package.
    I hope this helps,
    best,
    Alejandro

  • No sound after I export a video in premiere elements 12

    Alright I am doing a walkthrough on a video game so I am deleting audio out of my clips and adding in narration. While I can hear and see my narration just fine in one of my videos, when I export it I hear no narration or sound at all.
    I have tried adding more narration tracks that didn't work.
    I have tried rendering it in different format files didn't work.
    And I have even uninstalled and reinstalled premiere elements 12 and it still glitches on that one video
    Anybody have any ideas.

    tommy_lop
    There is a known issue with Premiere Elements 12/12.1 in which addition of narration using the project's Narration Tool results in a loss of sound for audio on
    numbered audio tracks and Soundtrack. Llamadude came up with a solution which is described in the following link
    http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
    Please review the solution and let us know if it works for you.
    Another possibility...are you working with video audio that was recorded with a variable frame rate. If so, that might be a factor. In those instances, the problems range from audio out of sync to not being able to import the video audio file at all. The typical fix is to take the file into the free HandBrake to convert from variable to constant frame rate - result H.264.mp4 file with constant frame rate for import into the Premiere Elements project.
    https://handbrake.fr/
    Please review and consider and then let us know if any of those considerations worked for you.
    Also, what are the complete properties of the source media coming from these games recording?
    Thank you.
    ATR

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • Poor sound after updating to ISO 7

    Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

    I also loved my iphone because it HAD great sound.  Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing.  The sound is so low even though I have it on the highest sound possible.  The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos.  Help Apple!  THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone.  I need my sound back!  Apple please find out what happened in your update that caused the loss of the sound!

  • Reflection of the received Signal for Channel Sounding

    I am trying to use a USP NI 2920, under Labview control, in order to make a sort of channel sounding. The USRP generates a pseudonoise (PN) sequence that BPSK modulate the carrier sent to a TX antenna. The same USRP runs a receiver process that acquire the signal form RX antenna, demodulate it and correlate it with a copy of the PN. so now my problem is that the received signal is from the LOS but i want the received reflected signal too so how can i get it and represent it I hope any help would be appericated
    Finally Thanks
    Aomine

    Hi Aomine,
    please don't ask the very same question by PN!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for