Split columns in ALV Grid Display.

Hi
Currently we are displaying the output as below :
currently :
Docid | Created | Posted |
      |          |      |
Needed :
Docid     |     Created     |     Posted     |
         |X1     |X2     |X3     |X4     |
     |     |     |     |     |
now some columns have to be splitted as above like Created is splitted into X1 and X2, Posted into X3 and X4 .I am using Set_table for_first_display method to display the current result, so is there any option in the method that can split the columns into two .
Edited by: Varun on Jan 27, 2011 7:30 PM
Edited by: Varun on Jan 29, 2011 2:25 PM

I am not sure of the maximum of columns possible.
If you see the col_pos field in the field catalog table it can have only 2 digits. so i would assume it would be only 99 columns, but not sure.
Would get you more information soon.
Thanks,
Balaji

Similar Messages

Maximum number of character we can print in a column uing ALV grid display

Hi frnds,
My requirment is to print 500 charcter data in a column using ALV grid display.
Could any body tell me is it possible and the maximum character it can i print in a column using ALV grid dispaly.
Regards,
Sandipan

Hi Sandipan,
refer notes 857823, 910300 and 959775. All these say there is a limitation of 128 characters.
857823 - ALV grid: Strings with a maximum of 128 characters
Symptom
Entries in cells of the type CHAR or string are truncated after 128
characters in the SAP GUI.
also refer,
ALV Grid Control (cl_gui_alv_grid), function module (Full-screen) Grid
(Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
Cause and Prerequisites
The data table that is sent to the front end only allows character values
with the length 128.
Solution
This is the standard system behavior and cannot be changed.

Want to display more than 300 charcters in a column using ALV grid display

Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.

Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna.

How to insert the checkbox as a separate column in alv grid display

Hi
How to insert the checkboxes as a separate column in alv grid display with using the reuse_alv_fieldcatlog_mege.
example
matnr    maktx ersda                 checkbox
10        books 28/03/2009          checkbox
Thanks
chinnu

Hi,
    Check the following code.
TYPE-POOLS: slis.
TYPES:
      BEGIN OF ty_output,
      chk TYPE c,
      number TYPE i,
      name(20) TYPE c,
      END OF ty_output.
DATA: gt_output TYPE STANDARD TABLE OF ty_output,
      gs_output TYPE ty_output.
DATA: wa_layout           TYPE slis_layout_alv.
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
After you populate the data, build the field catlog like shown below.
wa_fieldcatalog TYPE slis_fieldcat_alv.
wa_fieldcatalog-fieldname = 'CHK'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m   = 'CHK'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
wa_fieldcatalog-fieldname = 'NUMBER'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m   = 'NUMBER'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'NAME'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '3'.
wa_fieldcatalog-seltext_m   = 'NAME'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_layout-box_fieldname     = 'CHK' .
wa_layout-box_tabname       = 'GT_OUTPUT' .
Now call the FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = sy-repid
      i_callback_pf_status_set          = 'PF_STATUS'
      i_callback_user_command           = 'USER_COMMAND_GRID'
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
      is_layout                         = wa_layout
      it_fieldcat                       = it_fieldcatalog
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   I_HTML_HEIGHT_TOP                 =
*   I_HTML_HEIGHT_END                 =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_output
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Sub columns in alv grid display

hi everyone,
    can anyone tell me the way in which we can include sub-column headings in alv grid display. i.e., for example as shown below.
    column1             column2              column3
scol1   scol2         scol3   scol4        scol5   scol6........................
thanks in advance. Here we are generating the column headings by using fm field catalog merge.
regards,
rajsekhar.k

check this thread, check the sample code in my post
Re: multiple headers in ALV.

Max number of columns in Alv grid display.

Is there any limitation on number of fields that can be displayed using alv grid display.
Please tell how i can display 199 fields using ALV.
Thanks in advance.

I am not sure of the maximum of columns possible.
If you see the col_pos field in the field catalog table it can have only 2 digits. so i would assume it would be only 99 columns, but not sure.
Would get you more information soon.
Thanks,
Balaji

Display one or more rows for a particular column in alv grid display

Hi,
My requirement in the report is to display users for a particular workitem id.If a workitem is in the inbox of one or more users(approvers) i have to display all the user names in one field in alv grid output (output-approver id).There are other fields which display details of the workitem also.
Is there a way to populate multiple rows for a single column or creating one more internal table for users in the alv output table.
Please suggest.
regards,
Sravanthi Chilal

ALV only can show flat internal table data.
you should set a sort on the field which you want to show only once.
Then on the output of the ALV, the field with the same value will show only once.

Calculating Totals for a column in ALV Grid Display

Hi All,
I frustrated with the problem of simple calculating total for a column. I wrote the following code:
LW_CATALOG-TABNAME   = P_GV_STRUCT.
LW_CATALOG-FIELDNAME = 'ZSUMMS'.
LW_CATALOG-DO_SUM    = GC_X.
APPEND LW_CATALOG TO G_FIELDCAT_TAB.
CLEAR LW_CATALOG.
It is not working. Could you please suggest the solution?
It would be great help to me.
Advanced Thanks,
Phani Kumar

Phani,
Did u try playing around with any of these layout fields ?
no_sumchoice(1),       " no choice for summing up
no_totalline(1),       " no total line
no_subchoice(1),       " no choice for subtotals
no_subtotals(1),       " no subtotals possible
no_unit_splitting " no sep. tot.lines by inh.units
totals_before_items,   " diplay totals before the items
totals_only(1),        " show only totals
totals_text(60) ,      " text for 1st col. in total line
subtotals_text(60) ,    " text for 1st col. in subtotals
b. Addtionally... not a solution.. but u know...
just try the same code iwth reuse_alv_list_display and see if the total gets displayed properly ?

ALV grid display the subtotal not getting for one column at the output

Hi,
I am working one report ALV grid display and subtotal is not getting for one paricular coulumn.
Eventhough that column has some values.
So can anyone give the proper solution.
Waiting quick response.
Best Regards,
Bansi

Hi
see this link .
https://wiki.sdn.sap.com/wiki/display/ABAP/SUBTOTALinALV
or try this program.
REPORT zalv.
DATA:
t_sflight TYPE TABLE OF sflight,
fs_sflight TYPE sflight.
DATA:
r_container TYPE REF TO cl_gui_custom_container,
r_grid TYPE REF TO cl_gui_alv_grid.
*FIELD CATALOG
DATA:
t_fcat TYPE lvc_t_fcat,
fs_fcat TYPE lvc_s_fcat.
*SORTING THE BASIC LIST
DATA:
t_sort TYPE lvc_t_sort,
fs_sort TYPE lvc_s_sort.
fs_fcat-fieldname = 'PRICE'.
fs_fcat-do_sum = 'X'.
APPEND fs_fcat TO t_fcat.
fs_sort-spos ='1'.
fs_sort-fieldname = 'CARRID'.
fs_sort-down = 'X'.
fs_sort-group = '*'.
fs_sort-subtot = 'X'.
APPEND fs_sort TO t_sort.
SELECT * FROM sflight INTO TABLE t_sflight.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN1'.
SET TITLEBAR 'TITLE1'.ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
**& Module HANDLER OUTPUT
MODULE list OUTPUT.
CREATE OBJECT r_container
EXPORTING
container_name = 'CONTAINER'.
CREATE OBJECT r_grid
EXPORTING
i_parent = r_container.
CALL METHOD r_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = t_fcat
it_outtab = t_sflight
it_sort = t_sort.
ENDMODULE. "list OUTPUT
Regards
Hareesh Menon

ALV GRID Display Column Width problem when filtering

Hello All,
   When i displaying ALV Grid Display ,i selected one column and set filter for that.
the problem is column width at display is 12 charecters but in filter it is allowing only 10 charecters to enter which is wrong. i am unable to set filter.please give solution.
Thanks
Sandeep.G

hello i am calling perform, ineed to set OUTPUTLEN according to field length how can i do that.
FORM fill_fieldcat USING p_field TYPE slis_fieldcat_alv-fieldname
                           p_text TYPE slis_fieldcat_alv-seltext_l
                           p_flag TYPE c.
wa_fieldcat-fieldname    = p_field.
wa_fieldcat-seltext_l    = p_text.
wa_fieldcat-no_out = p_flag.
   wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.

ALV grid display with more than 1000 columns

Hi Friends,
I have to prepare a report output which have 1015 columns.
User will give 100 weeks of data to retrieve. I have to display the output in day wise.
100*7 + 315 = 1015 columns.
I am using ALV grid display for this in 4.6C.
My Question is, whether I have to declare the output table type with 1015 fields.?
Is there any other way to do this, without declaring 1015 cloumns.
Please guide me to solve this.
Regards,
Viji.

I'm thinking when your End-user will press Ctrl + P feeding A4 size to printer
Thomas:
Maybe the functional consultant is pulling your leg?
May be OP is pulling our legs or something further?
Cheers

How to Display Sub-Columns using ALV Grid

Hi ,
Could someone tell me how to display sub-columns under a parent column using ALV Grid. Do we have any standard Program which has this scenario. Please let me know.
Thanks,
Abaper.
Message was edited by:
        ABAP'er

you can check all with <b>BCALV* or RSDEMO*</b> in SE38 for all Std
check below
BCALV_DND_01                   Drag ALV Row to Tree Folder
BCALV_DND_02                   Drag Icons from Tree to Rows of the Grid
BCALV_GRID_DND_TREE            ALV Grid: Drag and Drop with ALV Tree
BCALV_GRID_DND_TREE_SIMPLE     ALV GRID: Drag and drop with ALV tree (simple)
BCALV_TEST_COLUMN_TREE         Program BCALV_TEST_COLUMN_TREE
Rewards if useful............
Minal

Kindly help to develop alv grid display

Hi ,
I have a requirement in which I need to display ALV GRID display and in its tool bar 4 butons are required. In the same view down to alv display i want to develop a tabstrip and its functionalities.I have designed classic alv using SALV_WD_TABLE component. I want a good GRID Display, not like flat field names that comes in list display, looking for bulged fields(like what comes for ALV GRID in normal abap) display with print version etc hidden and buttons at the top of ALV. Kindly help
Highly rewarded
Kindly help
Regards,
Lakshmi
Edited by: Lakshmi Menon on Nov 27, 2008 4:49 PM

Well Web Dynpro is generally output in HTML so the output formatting is never going to quite look like a desktop application (which is the case with the ALV Grid). You have very little control over the look of the column headers. In fact you can only manipulate what is available via the Portal Theme.
There is a new Tradeshow Plus theme available in NetWeaver 7.01 which uses a gradiant background for the column headers. This gives them a little more depth:
http://www.flickr.com/photos/tjung/3068850120/
The other option is next year when NetWeaver Business Client version 3.0 comes out, you will be able to render Web Dynpro applications using the NWBC Smart Client Rendering. This will render Web Dynpro applications using desktop libraries instead of HTML/Browser. This gives Web Dynpro a more SAPGUI/Desktop appears of course.
http://www.flickr.com/photos/tjung/2685619882/in/set-72157606418550143/

Dump when summing up CURR field in ALV GRID display

Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
        ls_lvc_data-value = space.
        clear ls_lvc_data-style.
        loop at it_fcat_local assigning <ls_fcat>
                where tech ne 'X' and no_out ne 'X'.
          if l_invisible eq 'X'.
            clear l_invisible.
            if <ls_fcat>-do_sum is initial.
              continue.
            else.
              clear ls_lvc_data-col_pos.
            endif.
          endif.
          add 1 to ls_lvc_data-col_pos.
          assign component <ls_fcat>-fieldname
                           of structure <ls_data> to <l_field_value>.
          _if sy-subrc ne 0.
            message x000(0k).
          endif._
Regards,
Guru

Thomas,
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line    = lr_data
2710
changing
2711
c_subtottxt       = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
          Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
          retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757

Field Catolgue in alv grid display

Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total     col1      col2      col3
1      220       100        20       100
2      320      120         50        150
tot    540       220        70         250
per               40.74     1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
Priya

Don't   do total by your self in the Pogram.
in the   Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table   data   it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
                         Data declaration
                         Data retrieval
                         Build fieldcatalog
                         Build layout setup
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
gowri
Message was edited by:
        Gowri Krishna

Split columns in ALV Grid Display.

Similar Messages

Maybe you are looking for