Split header at the left and right margins

I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

Hi Jerry: This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin. Seems like quite a silly issue, but I can't figure this one out! Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
Thanks for responding.
Eleni

Similar Messages

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

You can use this extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

White Borders Around the Left and Right Edge of a Published Movie

Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
Any help would be appreciated.

You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
<style>{margin:0px;}</style>

Enlarged photos show white borders on left and right margins

Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

Did you crop your photos?
Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

Justify left and right margins of text

Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIA

Colin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program.

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

myocom,
You can highlight random points in DIAdem as well.
Here is an example:
Use the cursor to move to the point you wish to highlight.
Press the "Set Data Point and Flag" icon on each data point you wish to highlight
When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Report with highlights.zip ‏5 KB

It it possible to have info on the left and right sides of iweb templates?

When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

Hi
You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

Thunderbolt has 2" blank border on the left and right edges.

When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge. How do I size the screen to fill up the entire display?

Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
Detlef

You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording.

How do I apply effects equally to the left and right channels.

I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Thanks!

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

Did you try restart the Mac?

Split header at the left and right margins

Similar Messages

Maybe you are looking for