Split in Mapping Program

Hai,
is it possible to use different Mapping programs in one process? For example I use Idoctype ACC_GL_POSTING01 to book some values from 3rd party into R3.
So now I have to make a different mapping in according to the booking code coming from 3rd party.
So what you guys think is the best way to solute this?
Because I don't want to make large If-statements in one mapping program - if their is any better way!
THX Matt
Message was edited by: Matthias Boettger

Hi Matthias,
sure:)
you can insert a switch step
(which will take into consideration the bookig code)
and on the basis of this create branches with different interface mappings (so different mapping programs)
but you have to do it in BPM (integration process)
Regards,
michal
Message was edited by: Michal Krawczyk

Similar Messages

Message split ABAP mapping

Hello everybody,
for a special mappging I use ABAP mapping -everything fine.
But I need to split the message with ABAP mapping.
Does anybody know if this is possible ?
In the ABAP-class I use the interface IF_MAPPING. This has as a result parameter the parameter RESULT Type XSTRING (no table).
It only works to add to XMLs in 1 XML string, but my result have to be 2 XML files.
Alternatively would it be an idea to use multi message mapping (graphical first) AND then ABAP-mapping for special mappings?
Thanks a lot,
Florian

Florian,
for multimappings in coded mappings (xslt, java and abap mappings) you'll also create a single stream, but in this case, the stream may have the following format:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <enter your first message here>
</ns0:Message1>
<ns0:Message2>
 <enter your second message here>
</ns0:Message2>
</ns0:Messages>
where <ns0:MessageX> tags refer to each different target message type.
In the case you have a 1:n split, you'll have only 1 message type, but may have several messages within it.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <My_message id=1>
 </My_message>
 <My_message id=2>
 </My_message>
</ns0:Message1>
</ns0:Messages>
Also, remember that, when you define an interface mapping as multimapping (meaning, you set either source, target or both interfaces to multiple messages, your input stream will also contain the <ns0:Messages> and <ns0:MessageX> tags, so you need to treat them in your mapping program.
Regards,
Henrique.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Do you have any plans to add user polygon (boundary) creation ability to your great Excel Power Map program ?

Hi Microsoft Excel Power Map program team!
I looked @ your Excel Power Map program add on, and it’s great.
However everyone is looking for the ability for the user to create polygon (boundary) maps.
It should not be that hard to add this functionality onto such a great map program you already have.
For example: let’s say one has 10 latitude & longitude coordinates and he wants to see the polygon (boundary) of them on your great map. One should be able to just put those 10 latitude & longitude coordinates in an Excel sheet, fire up your Power
Map, select that it should be plotted as a polygon (boundary) and it will display on the map.
Does Microsoft have any plans to add user polygon (boundary) map creation ability to your great Excel Power Map program?
I would also like to see Excel Power map have USA census tracts built into it just like is has USA zip codes built into it. Census data is also very important as thousands and thousands of people need to display polygon (boundary) for census tracts.
Please let me know if Microsoft has any plans to add user polygon (boundary) creation ability to its great Excel Power Map program?
Thank you very much!

Hi,
Thanks for your feedback, based on your feature required, I'll move your thread to Power Map forum, there might be give us some light.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powermap&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

ABAP MAPPING PROGRAM TRANSPORTATION ISSUE

Hi Experts,
Our issue is as following:
Already one ABAP mapping program is there in our DEV and in QA also.
Now we have changes the code according to some requirement.
Now we need to reflect the same in QA also.
For that I have certain doubts.
1) after releasing the request number in R/3, will it effect there in integration builder of the QA?
2) Is there any need to do in ADMINISTRATION to reflect the same?
Please revert urgenly.
Regards
sreeni

hi barry,
thanks a lot . we have released it into integration it is working fine.
thanks once again and i wll reward points also.
I think you can tell my one more doubt is as:
I have one new ABAP mapping program which is not used till now in any interface mapping in ID of XI.
now want use this my integration builder ID in as mapping program.
in this case is any requirement to enable the same in Integration ADMINISTRATION tab.
plz clarify me.
regards
sreeni

XI 3.0: Additional libraries for mapping program

Hello,
I got the scenario that the program within my Interface Mapping is making use of additional custom java resources (jar's).
I know that in XI 2.0 I had to put these additional libraries into the directory:
..\j2ee\cluster\server\additional-lib
and register them in the files:
..\j2ee\cluster\server\managers\library.txt and
..\j2ee\cluster\server\managers\reference.txt
Now in XI 3.0 I don't have these folders and files anymore. Therefore I simply imported the jar files into the repository...But I do neiter know wether that is the right way at all for registering additional libs in XI 3.0 nor I don't know if I have to import them into the same software component or namespace then the mapping program.
Does anybody know how to make use of additional libraries within a XI 3.0 Stack 5 landscape? I would very much appreciate any recommendations on that!
Kind regards,
Sven Lattermann

Hi Advait,
From the below what I understand is that you are not able to do value mapping for the follwoing
1     A
2     A
3     B
As value mapping allow one to one mapping only. Please do it like as mentioned below
1     1*A
2     2*A
3     3*B
Then in the graphical mapping of Integration Repository do the mapping for the same as shown below
source field > VALUEMAPPING> UDF--> TARGET Field
In UDF suppress the value of 1* , 2* , 3* which can be done as follows
create one UDF with one input field
//write the code as below to suppress the field
return input.substring(2);
Here the davantage of using 1* , 2* , 3* etc is that you have the option to use value mapping for 100 values which I think is not normally the case for any Interface.
If you have same source you can do the same thing for that.
Hope this helps you to resolve your query.
Thanks & Regards
Prabhat

Error in Java Mapping program

Hi friends,
I am tryin java mapping for first time.. and created one java program using link https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/wholePayloadtoaXML+field
But when I am compiling it using JAVAC, I am getting following error message that
package com.sap.aii.mapping.api does not exist . How can I solve this error.
Complete error is as follows:
C:j2sdk1.4.2_16-x64 in>javac PayloadToXMLField.java
PayloadToXMLField.java:1: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.StreamTransformation;
 ^
PayloadToXMLField.java:2: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.AbstractTrace;
 ^
PayloadToXMLField.java:3: package com.sap.aii.mapping.api does not exist
import com.sap.aii.mapping.api.StreamTransformationConstants;
 ^
PayloadToXMLField.java:8: cannot resolve symbol
symbol : class StreamTransformation
location: class PayloadToXMLField
public class PayloadToXMLField implements StreamTransformation {
 ^
PayloadToXMLField.java:16: cannot resolve symbol
symbol : class AbstractTrace
location: class PayloadToXMLField
 AbstractTrace trace;
 ^
PayloadToXMLField.java:27: cannot resolve symbol
symbol : class AbstractTrace
location: class PayloadToXMLField
 (AbstractTrace) param.get(
 ^
PayloadToXMLField.java:28: cannot resolve symbol
symbol : variable StreamTransformationConstants
location: class PayloadToXMLField
 StreamTransformationConstants.MAPPING_TRACE);
 ^
PayloadToXMLField.java:43: cannot resolve symbol
symbol : variable outputPayload
location: class PayloadToXMLField
 outputPayload =
 ^
PayloadToXMLField.java:50: cannot resolve symbol
symbol : variable outputPayload
location: class PayloadToXMLField
 out.write(outputPayload.getBytes());
 ^
9 errors
Thanks,
Brijesh Soni

thanks , it is done now..
the program is compiled properly and class file is generated.
but m gettin error in mapping.
in IR i created two message type with data type as string.
and i had imported the class file and java program using Imported archives.
now in interface mapping mapping program i had selected type as Java Class.and name of java program.
but when i tested it, it is giving error as Linkage error occurred when loading class zip/PayloadToXMLField
Please suggest, M i doing some thing wrong?is any thing missing?
Program tht i had used in java
from link (https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/wholePayloadtoaXML+field):
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import java.util.Map;
import java.io.*;
public class PayloadToXMLField implements StreamTransformation {
 String strXML = new String();
 String outputPayload = new String();
 //Declare the XML tag for your XML message
 String StartXMLTag = "<Payload>";
 String EndXMLTag = "</Payload>";
 AbstractTrace trace;
 private Map param = null;
 public void setParameter(Map param) {
 this.param = param;
 public void execute(InputStream in, OutputStream out) {
 trace =
 (AbstractTrace) param.get(
 StreamTransformationConstants.MAPPING_TRACE);
 trace.addInfo("Process Started");
 try {
 StringBuffer strbuffer = new StringBuffer();
 byte[] b = new byte[4096];
 for (int n;(n = in.read(b)) != -1;) {
 strbuffer.append(new String(b, 0, n));
 strXML = strbuffer.toString();
 } catch (Exception e) {
 System.out.println("Exception Occurred");
 outputPayload =
 "<?xml version="1.0" encoding="UTF-8"?>"
 + StartXMLTag
 + strXML
 + EndXMLTag;
 try {
 out.write(outputPayload.getBytes());
 trace.addInfo("Process Completed");;
 } catch (Exception e) {
 trace.addInfo("Process Terminated: Error in writing out payload");;
and detailed trace of error is:
11:34:21 Start of test
LinkageError at JavaMapping.load(): Could not load class: zip/PayloadToXMLField
java.lang.NoClassDefFoundError: zip/PayloadToXMLField (wrong name: PayloadToXMLField) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
11:34:21 End of test

Mapping Programs

Hi Expets,
We know that there are different mapping programs are available in XI environment like Graphical Mapping, Java Mapping, ABAP Mapping and XSLT Mapping. But on what basis we will choose one of these mapping programs?
I mean, which constraints would make me to choose specific mapping program?
Thanks,
Vijay Kumar T.

Hi Vijay,
This is a very good question!!!
We need to decide mapping based on performance ,response time and complexity.It is found that, one should try Graphical mapping first, and if its not possible by this,then go for other mappings.
see here for more detalis of mapping
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
At what situations we will go for ABAP mapping?
See these threads of similer discussion
ABAP Mapping
when we wil go for abap mapping ??
abap mapping
ABAP Mapping
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
see these also .. u might need this some day!!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
Some scenarios
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
JAVA mapping
How is JAVA mapping different from Graphical, XSLT and ABAP mapping?
Graphical mapping is an easiest and common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It may involve Java UDFs as a part of the mapping program. But sometimes with graphical mapping it is difficult or it may seem impossible to produce required output; for example text/html output, namespace change, sorting or grouping of records etc. A person comfortable with Object Oriented ABAP can go for ABAP mapping instead. One can also think of XSLT mapping as another option. In such cases, when java mapping is used the developer has full control over the message content and could manipulate it based on the output requirement. Hence, java mapping can prove to be an efficient approach.
A few example cases in which Java mapping can be used:-
 When the required output is other than XML like Text, Html or XHTML (html displayed as XML).
 When the data is to be extracted from input which is in text format.
 When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
 When data is to be filtered, sorted or grouped based on certain fields (considering File as source)
Advantages of using Java mapping
 Java program itself defines its own target structure.
 File content conversion at sender side can be avoided in case of text or html input.
 File content conversion at receiver side can be avoided in case of text or html output.
 Java can be used in combination with graphical mapping.
 Multi-mapping is also possible using Java mapping.
 Using Mapping Runtime constants we can determine all message related information such as Message ID, sender service etc.
 Disadvantages of using Java mapping
 Once the java mapping has been imported into XI, to incorporate any further changes one has to compile the java program and import the class file again into XI.
Thanqs
Biplab

Error in mapping program in scenario

Hi all,
here i am facing an issue which is to be fixed very urgently. please help me masters.
here i am having a single source structure and multiple receiver structures. after confirming many sources i finally started my work with the help of this blog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
But now i am facing a problem that my mapping program and interface mapping are executing the file successfully when i tested in the test tab of both of them.
When i tried to test my scenario in TOOLS-----TEST CONFIGURATION . there it is showing error in the interface determination/mapping step.
here on the receiver side we are going to use proxies. for that we used XI adapter.
please check the above blog and let me know whether my total procedure is perfect or not
THANKS in advance to all .
HELPFUL ANSWERS WILL BE REWARDED.

Hi Ramana !
Could you take a screenshot of your error and put it in www.imageshack.us, then give us the link to see exactly which error are you getting. Please expand the node of the error message.
Does the scenario works actually?? I've noticed some cases where the test tool gives errors but once the scenario is running everything works fine.
Regards,
Matias
Message was edited by:
Matias Denker

One mapping program for three diferent enviroments

Hello there,
I have developed a scenario in which an rfc requests a web service trough XI. In the process a BPM is involved together with some XSLT mappings.
 R3->XI->WebService
The Web service request message looks like follows:
<?xml version="1.0" encoding="UTF-8"?>
<cem:Z_ORDER_SEARCH xmlns:cem="http://XXXXXXXX/yyyyyyyyyyyy">
 <messageStructure/>
</cem:Z_ORDER_SEARCH>
Where "http://XXXXXXXX/yyyyyyyyyyyy" Is the web service destination.
Everything works fine, but as I have to manage three different environments for Development, Quality and Production I need three different versions of the XSL mapping since destinations are not the same for Dev, Qlty and Production environments.
I found out that I can get information of the sender using runtime parameters as follows:
<xsl:param name="SenderSystem">
I would like to evaluate this information to determine the target URL destination.
If the sender is the development sender then the URL target is the development destination and so on.
I tried the following code:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem=""
<xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
<xsl:template match="/">
 <cem:mappingProgram/>
</xsl:template>
</xsl:stylesheet>
This works all right, but I cannot insert code to evaluate the destination.
On the other hand, this code is not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
<xsl:param name="SenderSystem"/>
 <xsl:choose>
 <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
 </xsl:when>
 <xsl:when test="string($SenderSystem) = 'QUALITY'">
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
 </xsl:when>
 <xsl:otherwise>
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
 </xsl:otherwise>
 </xsl:choose>
 <xsl:template match="/">
 <cem:mappingProgram/>
 </xsl:template>
</xsl:stylesheet>
Neither this one:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
 <xsl:param name="SenderSystem"/>
 <xsl:template match="/">
 <xsl:choose>
 <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
 </xsl:when>
 <xsl:when test="string($SenderSystem) = 'QUALITY'">
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
 </xsl:when>
 <xsl:otherwise>
 <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
 </xsl:otherwise>
 </xsl:choose>
 <cem:mappingProgram/>
 </xsl:template>
</xsl:stylesheet>
I tried this other code, which is obviously not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <xsl:param name="SenderSystem"/>
 <xsl:choose>
 <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
 <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
 </xsl:when>
 <xsl:when test="string($SenderSystem) = 'QUALITY'">
 <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
 </xsl:when>
 <xsl:otherwise>
 <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
 </xsl:otherwise>
 </xsl:choose>
 <cem:mappingProgram/>
</cem:Z_ORDER_SEARCH>
 </xsl:template>
</xsl:stylesheet>
So the only way I found to make it works is like this:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <xsl:param name="SenderSystem"/>
 <xsl:choose>
 <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
 <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
 <cem:mappingProgram/>
 </cem:Z_ORDER_SEARCH>
 </xsl:when>
 <xsl:when test="string($SenderSystem) = 'QUALITY'">
 <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
 <cem:mappingProgram/>
 </cem:Z_ORDER_SEARCH>
 </xsl:when>
 <xsl:otherwise>
 <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
 <cem:mappingProgram/>
 </cem:Z_ORDER_SEARCH>
 </xsl:otherwise>
 </xsl:choose>
 </xsl:template>
</xsl:stylesheet>
Unfortunately this doesnt solve my problem, because I need to reproduce the mapping program three times in the document.
Any ideas, or suggestions how to manage one mapping program for the three different environments?
Thanks a lot in advance, Raú

Hi there,
I just found one way of getting this done. It may not be the better waw, but I post it in case it is helpfull.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
 
 <xsl:param name="senderSystem"/>
 
 <xsl:variable name="qualitySenderSystem" select="'WHATEVERTHENAMEOFTHEQUALITYSENDERSYSTEM'"/>
 <xsl:variable name="productionSenderSystem" select="'WHATEVERTHENAMEOFTHEPRODUCTIONSENDERSYSTEM'"/>
 
 <xsl:template name="mappingProgram" match="/">
 
 <UNIQUE_MAPPING_PROGRAM/>
 
 </xsl:template>
 <!Receiver determination depending on senderSystem>
 <xsl:template match="/">
 <xsl:choose>
 <xsl:when test="$senderSystem=$productionSenderSystem">
 <xxx:Z_ORDER_SEARCH xmlns:xxx="http://production">
 <xsl:call-template name="mappingProgram"/>
 </xxx:Z_ORDER_SEARCH>
 </xsl:when>
 <xsl:when test="$senderSystem=$qualitySenderSystem">
 <xxx:Z_ORDER_SEARCH xmlns:xxx="http://quality">
 <xsl:call-template name="mappingProgram"/>
 </xxx:Z_ORDER_SEARCH>
 </xsl:when>
 <xsl:otherwise>
 <xxx:Z_ORDER_SEARCH xmlns:xxx="http://development">
 <xsl:call-template name="mappingProgram"/>
 </xxx:Z_ORDER_SEARCH>
 </xsl:otherwise>
 </xsl:choose>
 </xsl:template>
</xsl:stylesheet>

How to pass input parameter (parameterized mapping) to java mapping program

Hello
I have a question about the parameterized mapping with Java (PI 7.1).
In the operation mapping (using Java-class) I defined a inputer parameter (string). I think I am supposed to retrieved the value using:
arg0.getInputParameters().getString("myInputParameterName");
where arg0 is the TransformationInput object.
However I am not able to get the value, I got runtime exception saying the inputer parameter doesn't exit.
Then I figured out maybe I need to bind the OM input parameter to Java mapping parameter, just like in case of message mapping, you need to bind OM parameter to MM parameter. However there is no way to define input parameter for the java mapping program.
Anybody has done java mapping with parameterized mapping?
Anybody can give any hint for this?
Thanks
Jayson

InputParameters params = container.getInputParameters();
DynamicConfiguration conf = (DynamicConfiguration) params.getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Edited by: Anand on Dec 10, 2008 4:13 PM

How to enable ABAP Mapping Program in Integration Builder

i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
After releasing it in DEv, it should go through request number.
but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
plz tell me what to do.
regards
sreeni

Hi kancham sreenivasulu ,
These web-sites may help u solving u'r problem:
How 2 connect non SAP RFC-Programs with XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
cheers!
gyanaraj
*****Pls reward points if u find this useful

Java Mapping Programs

Can somebody give me some sample Java Mapping programs and also XSLT mapping programs?

Hi,
For different mapping scenarios check these blogs:-
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
For Java Mapping, check these:-
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards.
Praveen

XI 2.0 Mapping Program Archive not imported

Hi,
I am working on XI 2.0 and using XSLT programs within a WinZip archive. I have tested the mapping program outside of XI and all is OK/Well formed etc, but when I try to import the ZIP file containing the xsl template the imported archive is empty so that I do not see any mapping programs in the list of files within the archive. I have tried then exporting the imported archive as a new zip file on the o/s and it contains the correct mapping programs.
I have re-started the XI box and still have nothing working.
Please help..
Mark

Hi Theo,
yes the mapping program is xsl. I have sorted it out now, by simply re-starting XI and the local pc running the Java WebStart.
Dont understand what the problem was, as I cannot now replicate it.. but thanks anyway..
Cheers,
Mark

Split Source Mapping Generation Task

Hi
I created a Dynamic Web Project in IBM Rational Application Developer Version 8. I am using BEA Weblogic 10.0.2 as the Application Server. When creating Dynamic web project, I added project to an EAR and named it testEAR. The project compiles without any errors and EAR is generated. When I try to add it to my server and deploy, I get the following error.
Runtime exception occurred in publish task 'Split Source Mapping Generation Task'.
Path must include project and resource name: /testEAR
I checked web.xml for duplicate entries and didnt find anything. Below are my XML files for Deployment Assembley. The first is for the testEAR project
<?xml version="1.0" encoding="UTF-8"?><project-modules id="moduleCoreId" project-version="1.5.0">
<wb-module deploy-name="testEAR">
<wb-resource deploy-path="/" source-path="/"/>
<dependent-module archiveName="XYZ.war" deploy-path="/" handle="module:/resource/XYZ/XYZ">
<dependent-object>WebModule_1308854753228</dependent-object>
<dependency-type>uses</dependency-type>
</dependent-module>
</wb-module>
</project-modules>
The second is for the Dynamic Web Project
<?xml version="1.0" encoding="UTF-8"?><project-modules id="moduleCoreId" project-version="1.5.0">
<wb-module deploy-name="XYZ">
<wb-resource deploy-path="/" source-path="/WebContent"/>
<wb-resource deploy-path="/WEB-INF/classes" source-path="/src"/>
<property name="context-root" value="XYZ"/>
<property name="java-output-path" value="/XYZ/WebContent/WEB-INF/classes"/>
</wb-module>
</project-modules>
Please let me know how to resolve this problem.

Hi,
This failure occurred probably because a Content Directory was not specified for the EAR project.
If a Content directory is not specified, then ".settings" and ".project" files will be part of the source path for the bea compiler.
As per the requirement, it is very important that WLS build scripts parse/compile and copy all the contents of the source folder.
So, as per the process the ".settings" directory and the ".project" directory are also copied into the temporary build directory.
This causes the failure during deployment as ".settings" and ".project" components can't be deployed.
The Content directory is a requirement only in WLS environment, due to the build logic of WLS.
By default, the WLS Eclipse tasks create a Content directory for a EAR project. So, this is not documented.
But, when you import an existing EAR directory, this limitation is exposed.
Creating the EAR Content folder should be the best solution.
Steps to modify imported applications:
1. Create a directory for the EAR content (for APP-INF, META-INF and all other modules or files that are part of the EAR) and copy all the files (except ".settings" and ".project") into the EAR content directory. (This has to be performed in windows explorer)
2. Then edit the file .settings/org.eclipse.wst.common.component EAR content directory reference for deploy-path:
For eg:
<wb-resource deploy-path="/" source-path="/"/>
to
<wb-resource deploy-path="/" source-path="/EarContent"/>
3. Refresh the eclipse project.
4. Delete the temporary project folder that is created in the below location:
<Workspace Home>\.metadata\.plugins\org.eclipse.core.resources\.projects\
For eg:
cd D:\Cases\EclipseWorkspace\.metadata\.plugins\org.eclipse.core.resources\.projects\
del WebTestEAR\
** This is a temporary folder which will be created by WebLogic build scripts during
deployment. **
5. Now, try to deploy the EAR project.
Hope it helps.

Split in Mapping Program

Similar Messages

Maybe you are looking for