Split one IDoc into two IDocs ?

hello all,
I wanna split one IDoc into two IDocs in XI?
how can implement it?
plx give some suggestions.
thx in advance
best regards
Yaning
Message was edited by:
Yaning Liu

Yaning,
Please find the below blog for changing the ocurrences of IDOC
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Best regards,
raj.

Similar Messages

ICal splits one event into two, how do I fix this?

I have one weekly repeating event entered. For the first two weeks it shows up like normal, as one event. But two weeks later it splits that one event into two different side-by-side bubbles. I did not alter the event. Does any one else have this problem? How can I fix this?

That is because you are sharing an Apple ID.
On both phones go to:
Settings > Facetime > turn off iPhone Cellular Calls
I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
Settings > Messages > Send & Receive
Settings > Facetime
Otherwise you will get each others Messages and FaceTime calls.
I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

Splitting one message into two files

Hi all,
I have a case where I have to generate two files for a single incoming message.The scenario is as follows-
I have the following structure as target -
- Structure 1 with some fields in it
- Structure 2 with some fields in it
I have done the mapping of the target with the source.
Now what I require is a separate file for structure 1 and another file for structure 2
Thanks,
Sandeep

You need to use BPM for this.
First create a message mapping with one source and two targets.
To add more message types to a mess map, go to the Messages tab (there are 3 tabs: Design, Test, Messages ).
Then you need one transformation and two send steps in the BPM.
regards
SKM

PRE9: How to split one clip into two (or more) clips?

I can't believe this is so hard to do... But HOW?

You don't necessarily need to separate the file into individual clips. When you do a cut on the timeline, this is a virtual cut, leaving the original file untouched but determining what will appear in the output. You can split the clip into multiple pieces, delete the bits you don't want, add transitions, insert new bits, whatever you want, all without affecting the original file in any way. Once you're happy, you output a new file using the Share options, and you get a new video file, with your original files still untouched.
If you want to split your file into multiple individual files, you can use the sliders on the time scale, and export (Share) using the Share Work Area Only checkbox. If you're doing this for purposes of reassembly, it would be better to save the individual clips in as lossless a format as possible, the default AVI format taking considerably more space but not losing quality. Hint: the sliders can be positioned to the time marker using Alt-[ and Alt-]. Once you've done this, note that your original file will still be there, untouched.
There is also VideoRedo Plus, a cheap program which gives frame-accurate selection and allows rapid subdivision of a piece of footage. It doesn't re-render as PE9 would (this is where loss of image quality creeps in using compressed formats such as MPEG), copying the original frames. You can then reassemble the bits using your video editor.

Music app splitting one podcast into two - why?

I have a 4th gen iPod Touch running iOS 6.1.6 - newest available. I listen to podcasts through the standard Music app. For some reason I have one podcast that shows up as two on that app - even though they have the same name. AND in iTunes on my Mac it is a SINGLE podcast that contains all of the episodes - including the six that are split out on the iPod. No change in the stream location; no change in the podcast name; nothing different between the meta fields when you do "get info" on the podcasts. In that separate podcast on the iPod, there are 6 podcasts (un-played) from 2012. Everything in the "main" podcast that is un-played is 2013 or newer.
I done a lot of googling and can find nothing on split podcasts other than when the actual podcast changed its name or the stream location. This is not the case here.
Any ideas???

This thread helps you, at least Brian's answer:
https://discussions.apple.com/message/23507673
At least this was the resolution for me.

Splitting one site into two

I have one large site which has two distinct sections. Each section has multiple pages. I have two domain names.
I would like to split the site by removing one of the sections and making a new site with these pages.
I imagine it is not difficult, but could not locate this in a search.
Thank you.
asuch

asuch:
It's very easy to do. Create a new site and drag the pages from site 1 to site 2. Somewhat the opposite as shown here.
OT

Splitting one column into two columns

Hi,
How to create two columns in one column header using JTable swing concept in java.
Thanks in advance

[http://forum.java.sun.com/thread.jspa?threadID=488822&messageID=2297054]
you can use MultiLineHeaderRenderer class for this purpose. search for that class and examples
sunil

Split the IDOC into multiple IDOC if the IDOC has more than 500 records

Hi All,
I developed an outbound IDOC in which we are facing an issue.
There is some limitation on the maximum idoc size it can handle.
If number of records is more than 500, split the idoc into multiple iDoc's, e.g. if it would have 1300 records , the result would be 2 iDoc's with 500 records, and the last one would have 300 records
How can i acheive this.
Regards
Jai

Hi,
1) first you need to know which message type/Idoc type you are triggering.
2) Get the Corresponding processcode from Partner profiles(WE20/ WE41).
3) Then the look for prper user-exit in the related processing FM.
4) write logic to split the IDoc accordingly.
if no proper user exit available then copy the standard processing FM and need to all ALE related configurations.
Catch hold any ABAP expert in your team to do all these.
Suresh

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

How can I split an Orders05 iDoc into multiple iDocs?

Hello,
Can one of you experts please tell me how I can split an ORDERS05 iDoc into multiple iDocs based upon Delivery addresses?
For example, if the iDoc contains 3 different Delivery Addresses then I need to split it into 3 iDocs.
It has been suggested to me that I can Create a custom function module. In this custom fm split the idoc into 3 based on the delivery address and create it using the FM MASTER_IDOC_DISTRIBUTE.
Problem is I don't know how to do this. Any help is greatly appreciated. Thanks.
Dan

Hi Dan Avis
Write a Custom Z program .
1 get order05 idoc number....
2 get the segment details...(Based on you condition...)
3 In a loop send the data to the FM MASTER_IDOC_DISTRIBUTE (Based on you condition...)
4 IDOC will generated,,,every loop and
5 Change the status of original idoc .
or
Create Function module and use the FM as process code to create 3 idocs...and processs...new generated idoc and block original idocs...
Call me if you have questions @ 302 290 5677
Thanks
Ramesh

I want to SPLIT A CLIP. That's all. Make one piece into two.

I am looking for the equivalent of the 'Command-T' function in iMovie HD. This is one of the most commonly used actions in processing video, and apparently it doesn't exist. The 'Split Clip' command in iMovie 09 simply does not work for me. At all. EVER. I have yet to find an instance where it isn't grayed out. All I want to do is split a clip, and add a transition between the two.
While I'm on my soap box, the revisions of iMovie since V.6 are without a doubt the most counter-intuitive, joy-sucking applications ever produced by Apple. iMovie made it FUN to edit video; these last two versions make it frustrating and cumbersome.
To reiterate, I want to SPLIT A CLIP INTO TWO PIECES. If anyone here can provide instructions for doing so (as opposed to explaining why it is NOT possible), then kindly do so. Thank you.

Trey, I seriously feel your pain. I'm editing a wedding project in IM '09 and it is literally taking me twice as long to complete the project than it would have in HD. You should be able to make splits in the event browsers, but that's too much like common sense for Apple. They completely mucked up the editing process by doing away with iMovie HD, which by the way is not working well in Snow Leopard.
As for split, I suggest the same thing as above. Put the playhead where you want the split. Us shortcut key, ShiftCommandS. I had problems with it this morning, but it finally kicked in.
I also had a problem when trying delete a selection of a clip. When I clicked delete, it deleted the selection plus the extracted audio of the entire clip from which I took the selection. Not sure what caused that.
I have FCE installed, so maybe I’ll haul it out and try using it for my next project. IM '09 is a pain. I'm not even sure how it's more accessible to general users.

Splitting the Company into Two Entities

Our company is currently using SAP ECC, SAP SCM and SAP CRM. We have planned to split the company into two to manage the existing two different businesses in separate landscape. (i.e business A & B are operated under one company code). In future state, business A and B will be operated in separate landscapes.
Has anyone carried out similar company split activities in the past? What are the challenges encountered in such a large transformation program? What are the key points to be considered in such transformation?

Hi,
That is one of the approach but it is very time consuming activity. Other thing I can suggest you to do the archiving of the data that is not required in the new landscape and then delete the data based on business process and other scenarios.
Check below 2 links:
http://service.sap.com/slo
SAP Demerger
Thanks
Sunny

How to split the records into two parts

Hi experts,
I have a field with 75 char length, this field have records also, Now i want to split the field into two differnt fields. That means upto first 40 char goes to one field, from 41st char to 70 char goes to another field, for that how to split record into two parts.
Plz advice this,
Mohana

Hi,
Do the following:
f1 = fsource(40).
f2 = fsource+40(30).
where fsource is the 70 character original string and target strings are f1 (length 40) and f2 (length 30).
Cheers,
Aditya
Edited by: Aditya Laud on Feb 22, 2008 2:10 AM

How to split a file into two small file

Hi All,
          I want to raed a file from FTP server.Then i have to split a file into two small file.File format look like this.
         R01!service_order!item_guid!resource_guid!assignment_guid
         R02!Service_order!product_id!product_discription!quantity
         R02!Service_order!product_id!product_discription!quantity
         R02!Service_order!product_id!product_discription!quantity
i want split file into 2 file,according to header and item details.one table containt header information (label R01) and second table containt (label R02).
can anybody help me for this.how can i split into 2 file.
Thanks
Vishwas Sahu

Create 2 internal tables. sat it_header, it_detail
Check for 1st 3 characters and if it is R01 then send it into it_header and if it comes out to be R02 then send it to it_detail.
Once done... You can either attach these tables into mail as two seperate files
Or you can download each internal table using GUI_DOWNLOAD.
Hope this helps!!
Kanchan

Split one IDoc into two IDocs ?

Similar Messages

Maybe you are looking for