Split Shift in SAP

Hi friends
Do we have some options in Standard SAP to maintain split shifts
Employee works from morning 8 to 12 p.m. then again comes and works from evening 4 to 8.
How can we create a work schedule for this and kindly adivse on how to proceed further.
Please advise.
Regards
Santhosh.S
Edited by: Santhosh Somasekharan on Mar 27, 2010 5:19 PM

Just a suggestion
Can you set it up as one shift with a four hour break in the middle.
i.e. set up a daily work schedule from 08:00 to 20:00
with a 4 hour break from 12:00 to 16:00 ?
bg

Similar Messages

Shift from SAP-Basis to SAP-BI

Hello Friends,
I am a SAP-Basis consultant and my company wants me to shift to SAP-BI. Can you please tell me if this is a good move and if anyone has actually moved from Basis to BI please do share your experience. Let me know approximate time it would take for a SAP-Basis consultant to shift to SAP-BI.
Are there any techniques which will help me in smooth transition to this module.
Thanks!!

Hi Zaheer,
Welcome to SAP BI forums.
First of all there many people who have changed from one module to another module in SAP. You can see many ABAPers who shift to BI. To get into BI first you need to have knowledge of SAP BW, once you learn BW then you can go to BI. There are few differences between them. I think you can easily get accoustomed with. In BW/BI also we have some authorizations. In BW/BI there are three main areas. 1.Modeling 2. Reporting and 3. Extraction. In future the reporting that is the Bex part will get changed to SAP BO according to the road map. Once you learn BI then you can shift to SAP BPC which is a part of EPM (enterprise performance management) which have BPC in the front end and BI at the back end. Its always good to learn new modules to keep ourselves tuned in.
Hope it helps.
Regards,
Raghu.

Refer previous discusstion: Account Shift in SAP BPC

Hello Vadim,
With reference to the previous discussion, about Account Shift in SAP BPC
I applied the Logic code provided by you, but it is not changing the position of accounts in Balance Sheet.
Whether, I am missing anything on this. need your valuable input to get this work.
Best regards
Saif

Dear Vadim,
When I applied the Logic script in my case it is validating the script successfully, but this balance shift is not happening, after data load, I have added *Include filename in default logic but still it is not working..
Does, I am missing any thing, please suggest.
Thanks,
SAIF

Shifting to SAP-APO

Hi,
I have been working as an ABAPer in a company for past three years in SD and MDM. I have been in a project for past two years and have worked closely with MDM, recently I received an offer for working in the APO module for the same project, this is purely a developer role and main requirement will be bug-fix or small changes as it is a support project. I am wandering if it is wise to persue it.
I shall be really grateful if any one can provide me any information on future prospects of APO or how it can help in my career.
Please note I aspire to become a Business Process expert. Is this the right way to go? Any advice would be of great help!
Thanks in advance.
Ani

hi Subhasha Ranjan,
Thanks for your suggession, but i heard that in out of india the billing will be more for SAP compare to mainframes. in Future if i want to travel to out of india, i can get the good billing(this is the reason i planing to shift to SAP from mainframe), apart from this i had attended the SAP seminors , they were telling lot of application(new) and old applications converting to SAP(this is also one more reason). The new projects are not coming in mainframe due to huge investment and some other factors also !!!. On these factors i am planing to shift to SAP from Mainframe.
Can you please suggest me on these.
Thanks,
Mahi

Expecting Suggestions !!! Career Shift from SAP Business Development to SAP R/3 Pre Sales

Hello Everyone,
I have been working as SAP Business Development Executive, with 5 years of Sales Background.Engaging with selling different SAP products. I feel, I should shift my profile as SAP R/3 Pre Sales Consultant, as i always passionate about to give high level consulting to companies rather than doing ground level sales job. What would be the right steps needed for this shift.Am open to work hard and learn new stuffs.Expecting your kind suggestions.Thanks in advance.
Regards,
Rajiv

Better get trained in area of domain experience and get SAP certified.
Check also this links
Career Advice: SAP Business One to R3 transition in Ottawa Canada
SAP B1 or R/3...which one to select
http://it.toolbox.com/blogs/sap-library/sap-business-one-vs-sap-r3-system-architecture-13952
http://it.toolbox.com/blogs/sap-business-one/sap-business-one-training-isnt-that-the-same-as-r3-9066
Contact nearest SAP education partner for getting trained.
http://www.siemens.co.in/en/about_us/index/our_business_segments/information_and_communication/sisl_business_profile/education_training/general_faq.htm
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm

Split dates in SAP Query

Dear experts,
While using a query over a specific period in which a person has multiple periods they are displayed as mulitple lines. In the output I want to include the validity period of this line.
SAP uses during runtime the fields:
SYHR_splits_wa-begda
SYHR_splits_wa-enda
These contain the exact dates I want to have in the output.
While creating infosets a number of (extra) fields calculated during runtime can be used as a selection & output option (the all start with SYHR_)
a. Is there a way to add SYHR_splits_wa-begda?
What we tried to do was create a new field in the infoset with:
Newfieldname = SYHR_splits_wa-begda.
This way we were not able to genereate.
Declaring the field SYHR_splits_wa-begda leads to the fact that it remains empty during run time (and the query goes into an endless loop)
Any suggestions on how to include the start date of the split in the output is very welcome!
regards,
Sebastiaan van de Weerdt

What can be done is, you can add an additional field to the infoset and in the field code part,
call either of the function modules:
CONVERSION_EXIT_IDATE_OUTPUT External date OUTPUT conversion exit (e.g. 01JAN1994)
CONVERSION_EXIT_LDATE_OUTPUT Internal date OUTPUT conversion exit (e.g. YYYYMMDD)
CONVERSION_EXIT_SDATE_OUTPUT Internal date OUTPUT conversion exit (e.g. YYYYMMDD)
The function modules allow to get a part of the passed date too.
Hope it helps.
Thanks,
Saipriya

Split Tiff in SAP

Hi all,
the problem is ... I´ve got a mutipage TIFF and I need the single pages. How can I split that TIFF for further processing in SAP?
Thanks in anticipation.
Regards Marc

Moderator message - Cross post locked

How to use SPLIT statements in SAP

I have a Variable which stores two field values like Purchase Order No and Date now I want to display this Value correctly from that Variable
e.g VAR1 = PONO/Date
How to print PONO on one line and Date on the other line from the VARIABLE VAR1.

Hi Nandan,
There are different ways to do this.
Suppose your variable contains always a fixed length of two other values like PO number an Date.
DATA: v_pono         TYPE ebeln,
      v_date         TYPE sydatum,
      v_variable(18) TYPE C.
v_variable = '000001234520050201'.
You can then read the parts like this:
v_pono = v_variable+000(010).
v_date = v_variable+010(008).
Suppose your variable contains always a variable length of two other values like PO number an Date.
DATA: v_pono         TYPE ebeln,
      v_date         TYPE sydatum,
      v_variable(20) TYPE C,
      v_table        LIKE v_variable OCCURS 0.
v_variable = '12345/20050201'.
You can then read the parts like this:
SPLIT v_variable AT '/' INTO TABLE v_table.
READ TABLE v_table INTO v_pono INDEX 1.
READ TABLE v_table INTO v_date INDEX 2.
Or you can use it like this:
SPLIT v_variable AT '/' INTO v_pono v_date.
Hope this gives you some clues.
Regards,
Rob.

Configuring DWS for "split" shifts (or multiple shifts in same day)

We need to set up a work schedule that spans a two week time period - employee works 42 hours per week - three 12 hour shifts and one 6 hour shift. The rotation is as follows:
                              Mon                    Tues                    Wed                    Thurs                    Fri                    Sat                    Sun
Wk 1                      7pm-7:30am       7pm-1am              off                       7pm-7:30am         7pm-7:30am     off                    off
Wk 2                      off                      off                        1am-7am             off                        off                   7pm-7:30am     7pm-7:30am
                                                                                7pm-7:30am
Our issue is Wednesday of Week 2. The employees essentially works two shifts - 6 hours from 1am-7am, then 12 hours between 7pm and 7:30am the following day. We have tried configuring a Wednesday flex time shift for 11 hours between 1am and midnight on Wednesday and a 7 hour shift on Thursday. But when we enter hours in CATS for the Wednesday shift that span into the next day it automatically changes the end time to midnight. Since we can't guarantee the employees will clock out for their 30 minute break at midnight this will not work. Does anyone have a suggestion as to how we might configure this?

Hello,
You can configure the Previous Day Indicator to assign the working times to the previous day.
Previous Day Indicator
The previous day indicator in Time Management indicates that the record should be assigned to the previous day. It is relevant mainly to daily work schedules which bridge two calendar days (e.g. 22:00 - 06:00).
Use
You only use the previous day indicator if you record time data with clock times. The daily work schedule assigned to the employee always applies to the day on which the start time lies in this case.
The information provided by the previous day indicator is therefore of central importance. There is no other way for the system to assign a record which has a start time a day later than the start time in the personal work schedule to the correct daily work schedule.
Planned working time 22:00 - 06:00
Record entered 02:00 - 05:00 -> previous day indicator
is set
Examples
The daily work schedule NIGHT 2 comprises a planned working time of 22:00 through 06:00. An employee works the night from December 14 to December 15, and works a substitution for his/her foreman from 02:00 through 04:00.
The previous day indicator was not set when the substitution was recorded. The substitution is therefore assigned to December 15 instead of December 14. This can lead to the following problems, for example:
Collisions with substitutions on the following day.
The substitution not being taken into account in payroll, as the following day is a Saturday and the employee does not have to work on Saturdays.
I hope this clarifies for you.
Bentow.

Split Valution in SAP IS Retail

Hi Experts,
II need to separate stock by price. For example vendor offer discount for particular article which has stock already at DC or Store. How can I differentiate these stocks at DC or Store? Can split valuation concept apply here?.
Regards
Vijai Jain

Split valuation should be a good solution for this requrement. Partial stocks of an article can be valuated separately at the site level. Valuation categories and types are defined for each site; that is, for each valuation area level.
A valuation type characterizes one of the possible types of stock for a certain valuation category. Default valuation types can be defined for a valuation category.
This affects the valuation type that is to be entered in a purchase order. If you want to carry out split valuation for an article, you enter a valuation category in the accounting data of the article. This defines which valuation types can be specified.
- kanica
PS : I got this link sometime back. Might help you. [http://www.sap123.com/showthread.php?t=29]

Shift to SAP BW.

I got trained in SAP SD. I am interested in SAP BW.
Kindly let me know how to go about it and is it required to learn or have experience in ABAP for working in SAP BW.
What kind of job should I target for SAP BW.?
Your advice will be highly appreciated.
thanks
Vinod

Hi Vinod,
Yes, you can definitly go with SAP BW. To tell you, in BW, all we do is generating reports. for this, we basically extract the data from the r/3 functional areas. Having knowlege of one functional area, we help u understanding what data you extracting. And you can sure generate any kind of report that is related to SD. Not only that, for a particular report , you know where the data is in R/3 (I mean, the tables). So, you design complete data flow for the report.
Having functional knowlegde will help you analyse the reports whether they are correct or not and whether you got the right data or not. Simple eg, If the end user asked a report for say open orders, then we should know what is this open orders. Since you know SD, you can understand. rite?
Thanks
Vj

Invoice List Should Split only on Payer or Bill to Party

Salute Masters!!
Invoice list should split only on payer or bill to party function at VF21.
Pleases provide the solution.
Regards,
Srivastav
<contact details removed>
Message was edited by: Jyoti Prakash

You can control this by proper routine for copying control in VTFF for Header Source: Billing Doc & Target: Invoice List doc type.
To further reference on various invoice list split criteria, refer SAP Note 317935 - Invoice Split Criteria for Invoice Lists
Now if you want know as per your current configuration, how Invoice List Split in happening. Then follow following steps:
1.
Try using TCode VF24.
2.
Provide desire parameters & execute.
3.
Select the desired Billing Document in Invoice Due List. To do this Press Ctrl Key from keyboard to select multiple lines.
4.
Then click on simulation button(Shift + F7).
5.
Invoice List Simulate: Invoice List Overview Screen
6.
Select all lines.
7.
There first go for Logs, by pressing Log button.
8.
If there is No Log. Then click on Split Analysis button to get split analysis.
9.
Work on analysis result to make it possible for combining invoice for Invoice list.
10.
If your enhanced routine is can take care of your desire result for Invoice List. Then place that routine in VTFF for Header Source: Billing Doc & Target: Invoice List doc type.
11.
Repeat the step from 1. to 3. Then click on Collective Billing doc Button to create an invoice list with desired billing doc.
Regards
JP

Linking Peoplesoft to SAP

Hi, Can anyone help me in linking peoplesoft to SAP. i.e. The client was earlier working on Peoplesoft and is planning to shift to SAP, so would require to do the conversions.
Moderator message: far too generic, please search for available information, post specific questions related to ABAP development.
Edited by: Thomas Zloch on May 30, 2011 1:03 PM

We're doing a Peoplesoft to SAP migration in New York.
Call me.
416-953-0983

Split Valuation For Material Having No Open PO & Stock

Hi Experts,
Will somebody throw light on split valuation where there is no any open PR, PO & Stock for that material but system does not allow to make material split valuated.
System shows error meassge giving old PO nos list.
(Logically all these POS whole business transcations/cycle is completed )
I want split valaution to be done to the material whose stock is nil also there is no any open PR,PO for that plant in the system.
But I dont prefer to delete line items of the old PO for doing the split valuation.
Please suggest solution
Thanks in advance.
Ramesh
Edited by: RameshChandra Soni on May 17, 2008 11:46 AM

Hi,
You can find severaé threads about this on this forum.
Some hints:
1. In MM02 try to set the split valuation > Save > SAP will give error message > Push the appearing 'Display errors' button > SAP will say what hinders you from being able to set the split valuation.
2. As I remember stock has to be zero in current and previous period. (You can set your stock to zero in the previous period using MB1A201posting date in the past; after having set split valuation you can reset your stock level via MB1A+202).
3. IMPORTANT: you have to archive all existing batch records.
4. etc
BR
Csaba

Issue with Document Splitting

HI All,
After I activated Document Splitting, I have posted an Invoice(F-43). It has splitted correctly.
31 Vendor      PC1 20,000 Dr
31 Vendor      PC2 10,000 Dr
40 Exp A/c1 PC1   20,000
40 Exp A/c2 PC2   10,000
When I'm making payment through F-53, Its not splitting correctly. Below is the enry I am getting.
Its not splitting the amount made from Bank. In F-53, In Profit Center field, I gave PC2.
Pls let me know what mistake I made in Configuration.
and why Its showing Zero Balance Clearing A/c in this entry.
50 Bank A/c                             30,000
25 Vendor A/c                         20,000
25 Vendor A/c                         10,000
50 Zero Balance clearing A/c 10,000
40Zero Balance clearing A/c   10,000
Niranjan Yandamuri

Hi Niranjan,
Split Processor basically does two things: splitting a document line item or adding balancing entries for selected dimentions (profit center, etc). Split Processor determines whether a line needs to be split based on Split Rule. A Sprilt Rule is assigned to Business Transactions, A Business Transaction with a Variant defines which Item Categories are avalable for Split Rule to split or not split.
Here is the documentation for Item Category:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/ee/79c5c00ca249b783bc74fff0e484aa/frameset.htm
Here is the concept of document splitting:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/87/3da04028f40160e10000000a1550b0/frameset.htm
Here is how to configure document split process:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/49/121407cbff280ee10000000a42189c/frameset.htm
Hope this is helpful.
Regards,
Ming

Split Shift in SAP

Similar Messages

Maybe you are looking for