Split storage locations into bin locations
Hi,
Is it possible to split storage locations into bin locations without using warehouse management?
Regards,
Shiyam
Hi,
You can set up as many storage locations as you need and so COULD have one storage location for each BIN (there is only a one-to-one relationship and so you can't use multiple bins in the same location without WM).
But if you have lots of BINS then you should really be using WM.
Steve B
Similar Messages
-
Transfer stock from Storage Location to Bin
Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
SumanDear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman -
Adopt Storage Location into Purchase Requisition
Hi all,
We plan some materials on storage location level with reorder points. As soon as the stock falls below the reorder point MRP creates a new purchase req. but the storage location field in the PR is blank.
I already tried to use the field 'storage loc. for ext. procurement' on the MRP1 view of the mat. master. But this has only impacts when I convert the PR into a PO.
As the demand for the material is on storage location level, I thought there should be a way to get the storage loc. into the PR.
Thank you for your help.
TobiHi,
If you want to plan your materials seperately for each storage location then you need to activate MRP at storage location level first in IMG:
SPROMaterials ManagementConsumption based planning>Planning>Define Storage Location MRP per Plant
and maintain MRP indicator as 2,
similarily maintain indicator 2 in material master, and then fix the reorder levels for each seperately.
After this system will create seperate PR for each sloc.
Hope this helps..
Regards
Dheeraj -
Multiple storage bin location for single material in material master
HI experts
1) we have a senario for our cliant , for which it is required to enter a 6 or 7 storage bin locations for a single part which is created in materials master without having a WAREHOUSE MANAGEMENT .
2) User can enter a quantity while doing GR in to that all locations.
3) reports based on stock avialble in all storage locations ( like MMBE)
KaustubhStorage bin used in IM is stored in table MARD. Key fields in table MARD are: client/plant/storage location. So you can have only one storage bin for a plant/storage location combination - even if you want to have more.
If you want more than one storage bin per storage location you have to use warehiuse management.
That's all.
Edited by: Csaba Szommer on Jul 26, 2009 12:35 PM -
Can we integrate SAP PM functional location into sap ehs waste management?
Can we integrate SAP PM functional location into sap ehs waste management?
We have already imported functional location into Incident Management.
The requirement is that we need to somehow integrate either functional location of PM or location of Incident Management
to EH&S Waste Management module.
Any comments/ideas would be highly appreciated !!Hi !
Through this IMG activity you can integrate Waste Management business partner to other objects. What you have asked should be possible. But default settings provided with this IMG activity are,
You can integrate Business partner to,
1. Plant
2. Company Code
3. Cost Center
4. Controlling Area
5. Order
6. Customer
7. Vendor
8. Storage Location
9. Plant for Storage Location
You can see this in the structure, “EHSWAS_MDINTO”.
See this IMG activity,
Environment, Health & Safety -> Waste Management -> Master Data -> Basic Settings for Master Data -> Specify Object Types for Integration.
“A waste management business partner can be identical to other objects in the SAP System, for example, a plant, a company code, or a cost center. In the master data for the Waste Management component, you can also assign a waste management business partner the object in the SAP System to which it is identical.
In this IMG activity you specify which object types you can assign to the waste management business partners.
Standard settings:
Default settings are delivered. You cannot change these settings, but you can add more settings.”
Regards
Subash Sankar -
Use Batch Number for bin location
Hi:
if I not use WM module, can I use batch number for bin location instead.
I will set naming convention for batch number to represent bin location.Hi,
You can use it, but I wont suggest it. The batch specifies a group of materials produced with same recipe or with same characteristics.
If you use BIN location as batch name, suppose you transfer post from one storage location to another storage location where the bin location change and the batch number remains the same. It will simply create confusion.
Regards,
AKPT -
Hello All
Currently our clients do not use the bin location function in SAP. They have a UDF called bin location on the batch details screen.
We would like to setup bin locations using the SAP Bin Location functionality. However the client is not happy with how the bin locations work in SAP.
e.g. of their existing bin locations :Hello All
Currently our clients do not use the bin location function in SAP. They have a UDF called bin location on the batch details screen.
We would like to setup bin locations using the SAP Bin Location functionality. However the client is not happy with how the bin locations work in SAP.
e.g. of their existing bin locations :
1A1 2A1 3A1
1A2 2A2 3A2
1A3 2A3 3A3
e.g. Location 3A1 is not specific to a warehouse. It is a bin location that can be in any warehouse. e.g. A01, J01, etc.
So in essence bin location 2A1 can contain items that was receipted into warehouse A01 and warehouse J01. The bin location is not specific to a warehouse.
Is there a way to setup the bin location without specifying it for a specific warehouse. They do not want the bin location to be created as
"A01-1A1"
"J01-1A1"
Any ideas would be appreciated,
Thanks
Janice -
How Do I Move Local OneDrive Storage Folder to Another Location?
Howdy,
I've just installed the new 9926 build and wanted to sync my OneDrive data. I am using native VHD boot and so OneDrive setup wizard automatically chose the local
%USERPROFILE%\OneDrive folder as a local storage for the data obtained from OneDrive.
However, I don't want the data to be stored on my VHD drive. The OneDrive wizard didn't provide any Back button to change settings for the local storage location, so I had to use the location I've chosen.
Now how do I move the OneDrive folder to another location? Previously you could right-click OneDrive folder, chose Properties and change the location on the Location tab. Now there isn't such a tab.
Is it a step back in usability for OneDrive feature?
How do I move local OneDrive cache folder to another location?
Thank you.
Well this is the world we live in And these are the hands we're given...I've found out that you have to unlink OneDrive from your PC and repeat configuration steps to change the location of OneDrive folder on your PC, just like you did so in pre-Windows 8.1 builds.
Is it a new behavior and MSFT wants to get rid of Location feature in newer Windows 10 builds, or it is just a temporary issue because some parts of Windows 10 TP code are based on pre-Windows 8.1 codebase?
Thank you.
See also
Move the OneDrive Folder
Well this is the world we live in And these are the hands we're given... -
Create a delivery note with bin locations and batch numbers
Hello everyone,
when sending this message to my b1if scenario i am receiving this error (which says nothing):
Exception : DI Error: (-2010) Internal error (-2010) occurred
This error only occurs when using a warehouse with bin locations. For regular warehouses it works when leaving the <DocumentLinesBinAllocations> away.
What could cause this issue? Just for clarfying: UOMEntry Nr. 2 means that the sales unit contains 5kg of a product.
I would greatly appreciate any help.
Best regards
Simon
<CreateDelivery>
<Documents>
<row>
<CardCode>K100002</CardCode>
<DocDate>04.02.2015</DocDate>
<DocDueDate>04.02.2015</DocDueDate>
<DocNum>200048</DocNum>
</row>
</Documents>
<DocumentLines>
<row>
<DocEntry>62</DocEntry>
<LineNum>1</LineNum>
<BaseLine>1</BaseLine>
<ItemCode>8705</ItemCode>
<Quantity>1</Quantity>
<UoMEntry>2</UoMEntry>
<WarehouseCode>SB</WarehouseCode>
</row>
</DocumentLines>
<BatchNumbers>
<row>
<BatchNumber>20150701</BatchNumber>
<ExpiryDate>07.07.2015</ExpiryDate>
<Quantity>5</Quantity>
<BaseLineNumber>1</BaseLineNumber>
</row>
</BatchNumbers>
<DocumentLinesBinAllocations>
<row>
<BinAbsEntry>4</BinAbsEntry>
<Quantity>5</Quantity>
<BaseLineNumber>1</BaseLineNumber>
<AllowNegativeQuantity>N</AllowNegativeQuantity>
<SerialAndBatchNumbersBaseLine>0</SerialAndBatchNumbersBaseLine>
</row>
</DocumentLinesBinAllocations>
</CreateDelivery>Hi Pablo,
based on the code from the other thread it should be like that for the first row:
delivery.Lines.ItemCode = "ID200";
delivery.Lines.Quantity = 15;
delivery.Lines.BinAllocations.BinAbsEntry = 3107; // guessed AbsEntry
delivery.Lines.BinAllocations.Quantity = 10;
delivery.Lines.BinAllocations.SerialAndBatchNumbersBaseLine = 0;
delivery.Lines.BinAllocations.Add();
delivery.Lines.BinAllocations.BinAbsEntry = 3108;
delivery.Lines.BinAllocations.Quantity = 5;
delivery.Lines.BinAllocations.SerialAndBatchNumbersBaseLine = 1;
delivery.Lines.BatchNumbers.Location = "02-A";
delivery.Lines.BatchNumbers.BatchNumber = "XY";
delivery.Lines.BatchNumbers.Quantity = 10;
delivery.Lines.BatchNumbers.Add();
delivery.Lines.BatchNumbers.Location = "02-B";
delivery.Lines.BatchNumbers.BatchNumber = "YY";
delivery.Lines.BatchNumbers.Quantity = 5;
You got now :
1 Delivery Row, Quantity 15
2 BinLoc Rows, Quantity 10+5
2 Batch Rows, Quantity 10+5
regards,
Maik -
How to display Bin Location Name in GRPO PLD ?
Hi Experts,
Do you have any idea about how to display Bin location name in GRPO PLD (SAP B1 9).
Awaiting for your valuable suggestions.
Regards
KMJNagaraj,
The requirement is when the user is doing GRPO, user will select the Bin location to receive the items. When the user given this GRPO details to Store keeper, user has to put the same items in particular bin location.
Regards
KMJ -
Sort Order of BIN Location Content Issue
SBO Version 9.0 PL08 HF1
We have an issue with trying to create a stock transfer document from within the 'BIN LOCATION CONTENT' screen. We have selected the option to 'Clear Stock'.
We have sorted the list by Item code and then selected the items we want to include.
We then clicked Stock Transfer > Clear Stock, which then generates a list of items which are either NOT in the order we sorted them by or we not even select on the opening screen.
One thing we have noticed from the system message bar at the bottom is that it has the following message in it:
"One or more selected warehouses or bin locations cannot be cleared or replenished."
This is proving very frustrating so any assistance would be greatly received!
Thanks,
SarahHi,
Please check SAP note:
1978411 - wrong items in stock transfer created from bin location
content list
Thanks & Regards,
Nagarajan -
When I type a URL into the location bar, I have to click on the green arrow at the right end of the location bar for the new page to load. In previous versions of Firefox you just hit enter to load the new page.
This didn't help my problem. When I restart Firefox in Safe Mode, the problem goes away but none of the other troubleshooting tips help. I noticed today that when I start Firefox in normal mode, I get this error: "TypeError: Components.classes[cid] is undefined." It's a Javascript error, and I also noticed that when I go to the Gmail page in normal mode the cursor isn't automatically placed in the username field like usual. When I start Firefox in safe mode it does this, however.
-
Stock report Bin location wise
Dear expert,
i want "stock report Bin location wise" in crystal report, anybody can provide sql query.
thanksHi,
Take a look at procurement and inventory content provided by SAP.They should help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/58/f6383fdb800804e10000000a114084/frameset.htm
Regards. -
RF Pick and Pack delivery sequence going by material rather than bin locati
Hi All,
During picking and packing through RF we are entering the TO number and after that packaging barcode. Everything is working fine but transaction has some kind of logic where its taking the warehouse picker around different aisles based upon material rather than bin location.
Transaction for wave/discrete picking doesn't have this problem.
Can someone please advise how to fix this?
Thanks
UT
Edited by: Csaba Szommer on Feb 6, 2012 8:37 AMHi Frenchy
TO sort profile is setup for picking correctly but nothing for picking and packing. For some reason picking sort profile is not kicking in when using picking and packing.
Any other suggestions???
Thanks -
RF Pick and Pack delivery going by material rather than bin location
Hi All,
During picking and packing through RF we are entering the TO number and after that packaging barcode. Everything is working fine but transaction has some kind of logic where its taking the warehouse picker around different aisles based upon material rather than bin location.
Transaction for wave/discrete picking doesn't have this problem.
Can someone please advise how to fix this?
Thanks
UTHi Frenchy
TO sort profile is setup for picking correctly but nothing for picking and packing. For some reason picking sort profile is not kicking in when using picking and packing.
Any other suggestions???
Thanks
Maybe you are looking for
-
I had to get my iPhone 5c fixed today because there was a problem with syncing itunes files from my laptop; I changed the names of some of the song files/artists from my laptop and attempted to sync it to my iphone, but that created a corruption in t
-
Can't register APP together with MacbookAir
I bought the APP for Macbook Air and about to register it together with Thunderbolt Display which I bought the same time with Macbook Air. I can't pass the verification step of entering serial number for Thunderbolt Display. It keeps telling me that
-
Problem in getting my free navigation license
I have bought a new E71 from the UAE and am using it in Egypt...am facing a problem with getting my free 3 month navigation license code...I wonder how i get it noticed that the gps is working as well and the navigation was working until i restored t
-
Copy from Premiere, Paste in After Effects? Not for me. . .
Seem logical and one of the most obvious things we would all want to do: take parts of what we are editing in Premiere, bring them over to After Effects, add an effect, bring the part back to Premiere to continue editing. Perhaps my logic is way out
-
This code worked as a query in DB2, but I am not sure what the syntax is for casting decimals in Oracle: decimal(decimal(A.record_count-A.generic_count-A.unusable_count,10,2) / decimal(B.record_count,10,2) * 100,10,2) usable_percent The full query is