Split TempDB Data file into multiple files

Hey ,
I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
Could someone please help me to verify the following information:
1]
We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
at a time. Please let me know should I add two TempDB data file at a time?
2] We have TempDB Data and log files both on the same Drive of SQL server .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
disks?
3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
1] Run script that create tempdb Database with a single file
2] Reboot SQL service in order to apply change
Your help will be apprecited .
Thanks ,
Daizy

Tom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
wait_type
waiting_tasks_count
wait_time_ms
max_wait_time_ms
signal_wait_time_ms
PAGELATCH_UP
2680948
3609142
10500
508214
PAGELATCH_SH
1142213
1338451
8609
324538
PAGELATCH_NL
0
0
0
0
PAGELATCH_KP
0
0
0
0
PAGELATCH_EX
44852435
7798192
9886
6108374
PAGELATCH_DT
0
0
0
0
Thanks ,
Daizy

Similar Messages

Split download file into multiple files

Hi all,
I'd like to split my internal table into multiple files when downloading. The split will be determined by contents of a specific field (e.g. create a new file for every unique country, where country is a key field). The number of files to download can only be determined at runtime.
Any ideas on how i can resolve this?
Thanks,
Chris.

try this...
*declare itab1 same as itab
data : filename(25).
loop at itab.
<b> move-corresponding itab to itab1.
append itab1.</b>
at end of BUKRS.
        *use GUI_DOWNLOD    FM here
   *pass itab1 every time here
   *change the filename everytime
     concatenate 'Company_' itab-bukrs into filename.
<b>   refresh itab.</b>
endat.
endloop.

C# Split xml file into multiple files

Below i have an xml file, in this file, i need to split this xml file into multiple xml files based on date column value,
suppose i have 10 records with 3 different dates then all unique date records should go into each file . for ex here i have a file with three dates my output should get 3 files while each file containing all records of unique date data. I didn't get any idea
to proceed on this, thats the reason am not posting any code.Needed urgently please
<XML>
<rootNode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-02</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-03</date>
<name>SSS</name>
</childnode>
</rootNode>
</XML>

Here is full code:
using System.Xml.Linq;
class curEntity
public DateTime Date;
public string Name;
public curEntity(DateTime _Date, string _Name)
Date = _Date;
Name = _Name;
static void Main(string[] args)
XElement xmlTree = new XElement("XML",
new XElement("rootNode",
new XElement("childnode",
new XElement("date"),
new XElement("name")
string InfilePath = @"C:\temp\1.xml";
string OutFilePath = @"C:\temp\1_";
XDocument xmlDoc = XDocument.Load(InfilePath);
List<curEntity> lst = xmlDoc.Element("XML").Element("rootNode").Elements("childnode")
.Select(element => new curEntity(Convert.ToDateTime(element.Element("date").Value), element.Element("name").Value))
.ToList();
var unique = lst.GroupBy(i => i.Date).Select(i => i.Key);
foreach (DateTime dt in unique)
List<curEntity> CurEntities = lst.FindAll(x => x.Date == dt);
XElement outXML = new XElement("XML",
new XElement("rootNode")
foreach(curEntity ce in CurEntities)
outXML.Element("rootNode").Add(new XElement("childnode",
new XElement("date", ce.Date.ToString("yyyy-MM-dd")),
new XElement("name", ce.Name)
outXML.Save(OutFilePath + dt.ToString("yyyy-MM-dd") + ".xml");
Console.WriteLine("Done");
Console.ReadKey();

Can I export a single file into multiple files?

Is there an option or a plugin that would allow me to set markers in the audio, and then have Soundbooth export the audio into multiple files?
As an example, let's say I have a 1 minute audio file. I place a marker at 0:00 and another marker at 0:10 and a third marker at 0:30. I then would select Export Multiple and I would end up with three seperate wav files, one 10 seconds long, the second 20 seconds long and the last one 30 seconds long.
Thanks

Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them

AppleScript Split text file into multiple files

I have large text files that I would like to break up into individual files. They are compilations of articles; I want to create a new file for each article, which begins with:
     Document # of #
I don't think any other lines start with "Document" so that might be fine as a delimiter.
Also, it would be great if the new files could be named "LAT_1", "LAT_2", etc.
I found this thread:
AppleScript separating one text file into many at Paragraph break
I tried the second script by twtwtw and changed
set parsingText to "Document"
but got the following error:
error "Can’t get item 2 of {\"LAT 1985-1990 local food copy.txt\"}." number -1728 from item 2 of {"LAT 1985-1990 local food copy.txt"}
I also found this thread but it was too complicated for me to understand. Re: Split a large text file with many entries into separate files
Can anyone help me modify the script? I've been looking at this as well as Unix commands to use in Terminal, but I'm just too much of a beginner.
Any assistance is much appreciated!
Trisha

Hello
Here's a modified version of the script in
Split a large text file with many entries into separate files
https://discussions.apple.com/thread/5641125?tstart=0
This will split the given text by delimiter line in the form of "Document # of #" and save each chunk of text from one delimiter to the preceding line of the next delimiter in separate file named after LAT_0000.txt, where 0000 is sequential number starting at 0001.
Note that any text before the first delimiter is ignored and not saved in output file. You may select multiple input files. Existing file in the destination folder is overwritten. Input text is assumed to be in UTF-8 and each line is termitated by U+000A LINE FEED.
set ff to choose file with prompt "Choose input file(s)." with multiple selections allowed
set d to choose folder with prompt "Choose destination folder."
set args to ""
repeat with a in {d} & ff
    set args to args & " " & a's POSIX path's quoted form
end repeat
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & args & "
use strict;
sub usage () {
    printf STDERR \"Usage: %s output_directory file [file ...]\\n\", $0;
    exit 1;
&usage() unless @ARGV > 1;
my $outdir = shift @ARGV;
unless ( -d $outdir ) {
    printf STDERR \"Not a directory: %s\\n\", $outdir;
    &usage();
my $i = 0;
my ($n, $n0, $t);
while (<ARGV>) {
    if ( /^ \\s* Document \\s+ [0-9]+ \\s+ of \\s+ [0-9]+ .* $/ox ) {
        $n = sprintf('LAT_%04d.txt', ++$i);             # e.g., LAT_0001.txt
        if ( $n0 ) {
            open(OUT, '>', \"$outdir/$n0\") or die $!; # overwrite
            print OUT $t;
            close OUT;
        ($n0, $t) = ($n, $_);
    else {
        $t .= $_;
if ( $n0 ) {
    open(OUT, '>', \"$outdir/$n0\") or die $!;          # overwrite
    print OUT $t;
    close OUT;
EOF"
Hope this may help,
H

Single File into multiple files

Hi,
I am working on scenario where I will be getting Header,Trailer and in between plant records.
I will be picking file and need to create a new file for each plant.
Do we require BPM for this? Can it be achieved in Message mapping only?
If so how?
Would appreciate your help.
Regards,
Chandra

Chandra,
Are u getting Header, Trailer, Plant records as different files from the source or in single file itself? If you are getting from different source then you need BPM. If you are getting single file and need to generate multiple output file then no need for BPM.
To be more simple N:1 or N:M then you need BPM.
1:M then no need for BPM.
Everything you have to do in the mapping part.
raj.

Adapter file sender doesn't split file into multiple message

Hi everybody.
We are in PI 7.0 SP10.
In adapter file sender, I want to split a file into multiple file.
We use protocole "file content conversion"
in the field "recordset per message", I put the value 10 to test.
The file content 30 records .
The result we have is the treatment is not split into multiple message .
The treatment is made but with one message.
I need to treat big files.
Is there some one who have an idea why t doesn't work ?
Thanks in advance for your help.
Regards
Edited by: Eric KOralewski on Jun 25, 2009 3:14 PM

Hi,
have you specified recordset name......if not, then specify it.............
in recordset structure, specify like RECORD,1 and not RECORD,*
again test your scenario......if still your file data is not getting split, then ask your basis guys to do a full CPACache refresh using PIDIRUSER..........your basis guys will know how to do it..........then again test your scneario............
Regards,
Rajeev Gupta

Split MP3 file into multiple MP3 files

I've been through the help section and is till cant seem to figure out how to split a large (2 hour) mp3 file into multiple mp3 files.
I have a 2 hour MP3 recording (Stereo not mono), and I have added markers (by simply pressing keyboard shortcut 'M' to add marker), but now I would like to know how to split that one mp3 files into multiple files from the markers which I have made...
All my marker types are "Cue" when i pressed 'M' at the locations I want the track to end/start

You didn't say which version of the program you're using, but in general, there is a way to do this by adding one additional cue at the very end of the file, then "merging" the cues (which converts the space between each cue into a "range"), and batch processing each range out to a separate file. (Make sure there's a cue at the beginning of the file, or at least the first material you want in a new file.)
Now that you've done all that work, I'm going to tell you that what you're doing is probably a bad idea. Opening any mp3 in Audition and resaving back to mp3 means you've doubled the losses and distortion inherent with the mp3 compression. Audition can't do lossless editing of mp3s. The bottom line: are you really splitting the file, and does the result have to be mp3 format? If saving to a (wave file, or any other lossless format, then what I'm saying doesn't matter.
In any case, "mp3 Direct Cut" is a terrific freeware program that does lossless mp3 editing, and I'd highly recommend you try it. It's saved my neck a number of times. See http://www.mpesch3.de.

Syndicator Server: possible to split the export file in multiple file?

Hello,
is it possible to split the export files into multiple files e. g. at 5000 records?
Perhaps there is a possibility in the mdss.ini? Or a setting in the mapping?
Thank your for your responses!
Melanie

Hi Melanie,
- If you are syndicating in the Xml format you have the option to syndicate one xml for every record. or multiple records one xml.
For this you have to make a simple setting in the Syndicator-> Map properties->XML file output->(multiple files/single file)
Other way around is:
- If you are syndiacting in any other format say text then the output file goes as one file for all records present in the MDM repository, for this you can use the search options.
- Create a search on some field value which will select a set of records from the lot.
- Then you can syndicate only those records which satisfies the search criteria.
- In this way it is possible to syndicate in parts
Hope It Helped,
Kindly Reward Points if found useful
Thanks & Regards
Simona Pinto

Split text file in multiple files based on a string

Hey all,
I want to split a text file into multiple files. I already found some examples where there is a split based on a number of files.
http://forum.java.sun.com/thread.jspa?forumID=256&threadID=260930
But I want to make a split based on a string (word) that I find in the file.
Anyone that can help me ?
Regards,
Atmoz

This is my testing code like it is now. Maybe there is a bug in there which causes a memory leak or so.
public class test {
     public static void main(String args[]) {
          File sSourceDir = new File("D:\\Test\\");
          File sDestinationDir = new File("D:\\Test\\");
          File[] files = sSourceDir.listFiles(new Filter());
          for (int i=0; i<files.length; i++) {
               File file = files;
               if (file.isFile()) {
                    System.out.println("Splitting file: "+files[i]);
                    splitFile(file,sDestinationDir);
               else {
                    System.out.println("Not a file: "+files[i]);
     public static File splitFile(File fSourceFile, File sDestinationDir) {
          int counter = 1;
          File fDestinationFile=new File(sDestinationDir,"NEW_"+counter+"_"+fSourceFile.getName());
          fDestinationFile.delete();
          String sLineOfData=null;
          boolean firstfile = true;
          try {
               BufferedReader DataFileReader = new BufferedReader(new FileReader(fSourceFile));
               PrintWriter outputStream = new PrintWriter(new FileWriter(fDestinationFile));
               while ((sLineOfData = DataFileReader.readLine()) != null){
                    System.out.println(sLineOfData);
                    if (sLineOfData.indexOf("UNA:+") != -1) {
                         if (!firstfile) {
                              counter++;
                              fDestinationFile=new File(sDestinationDir,"NEW_"+counter+"_"+fSourceFile.getName());
                              outputStream.close();
                              outputStream = new PrintWriter(new FileWriter(fDestinationFile));
                              outputStream.println(sLineOfData);
                         else {
                              firstfile = false;
                              outputStream.println(sLineOfData);
                    else {
                         outputStream.println(sLineOfData);
               outputStream.close();
               DataFileReader.close();
          } catch (FileNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return fSourceFile;
And this is an example of a file:
PS: I cut out each long line (that line from 4000 chars)
UNA:+,? '
UNB+UNOC:3d+5499757493404:14+3014331700208:14+050114:1200+ACC302++STS.GZ++1++1'
UNH+I15185477+UTILTS:D:03B:UN:E5BE03'BGM+E32::260+I15185477+9+NA'
DTM+137:200501141151:203'DTM+735:?+0100:406'MKS+23'NAD+MR+3014331700208::9'
UNA:+,? '
UNB+UNOC:3+549975f7493404:14+3014331700208:14+050114:1200+ACC302++STS.GZ++1++1'
UNH+I15185477+UTILTS:D:03B:UN:E5BE03'BGM+E32::260+I15185477+9+NA'
DTM+137:200501141151:203'DTM+735:?+0100:406'MKS+23'NAD+MR+3014331700208::9'
DTM+137:200501141151:203'DTM+735:?+0100:406'MKS+23'NAD+MR+3014331700208::8'
UNA:+,? '
UNB+UNOC:3g+5499757g493404:14+3014331700208:14+050114:1200+ACC302++STS.GZ++1++1'
UNH+I15185477+UTILTS:D:03B:UN:E5BE03'BGM+E32::260+I15185477+9+NA'
DTM+137:200501141151:203'DTM+735:?+0100:406'MKS+23'NAD+MR+3014331700208::9'Message was edited by:
Atmozzz

CS3: Saving or Outputting .AI File as Multiple Files

There must be a way to save or output a single Adobe Illustrator file into multiple files based on the "pages" I have created in the document?
For example, if I have tiled 10 tabloid-sized pages onto a single Illustrator CS3 .AI file, is it possible to save the file in a manner that will allow all of those tiled pages to be saved as a seperated or individual files?
I guess it would be a similar concept to how in newer versions (like CS4) you can export multiple jpegs of an illustrator file that contains several artboards and it automatically assigns a number suffix to the filename since multiple files were outputted from the single ai file.
Any help is MUCH appreciated. Thanks!

There must be a way to save or output a single Adobe Illustrator file into multiple files based on the "pages" I have created in the document?
For example, if I have tiled 10 tabloid-sized pages onto a single Illustrator CS3 .AI file, is it possible to save the file in a manner that will allow all of those tiled pages to be saved as a seperated or individual files?
I guess it would be a similar concept to how in newer versions (like CS4) you can export multiple jpegs of an illustrator file that contains several artboards and it automatically assigns a number suffix to the filename since multiple files were outputted from the single ai file.
Any help is MUCH appreciated. Thanks!

How to split large video files into multiple individual clips by date

Hello. I'm looking for a freeware/shareware program (if one exists, or willing to pay for one if it does this well) that will:
1) Analyze a large AVI file identifying the start/start points of each segment of video and the dates the video segments were shot.
2) Then allow me to organize (for example, join 2 or more segments together if it's a video with a lot of start/stop points during the same shot) the segments identified in step 1 into logical clips that could be split apart from the 1 large AVI file.
3) Lastly, it would split my one large AVI file into the multiple clips or files that I identified in step 2.
A piece of software called FootTrack does a great job analyzing AVI files as I describe in steps 1 & 2, but it doesn't allow you to split or export the one avi file into multiple avi files.
I really don't want to have to do this one clip at a time, I've got to believe there's a program out there that will automate this process for me.
Thanks

I don't know of a way to automate it. I just did about 15 years worth. It wasn't too hard. I use an application called mpegstreamclip. Its very easy and free to download either from the apple site or direct from its site.
http://www.squared5.com/
Bascically you set the in and out points with the i and o keys and export.

Collect data from a dynamic XML file into multiple internal tables

I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
My XML file is of the following type.It is very complex and the dynamice.
The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
"I" and "L" are child tags of <C>
<I>
       <J>10</J>
         <K>EN</K>
</I>
<L>
         <J>20</J>
          <N>BB</N>
</L>
Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
I need to collect <D>, <E> in one internal table ITAB.
I need to collect <G>, <H> in one internal table JTAB.
I need to collect <J>, <K> in one internal table KTAB.
I need to collect <J>, <N> in one internal table PTAB.
Below is the complete XML file.
?xml version="1.0" encoding="iso-8859-1" ?>
<A>
    <B/>
    <C>
       <D>RED</D>
       <E>999</E>
    <F>
       <G>TRACK</G>
       <H>PACK</H>
    </F>
    <I>
       <J>10</J>
       <K>EN</K>
    </I>
    <I>
       <J>20</J>
       <K>TN</K>
    </I>
    <I>
       <J>30</J>
       <K>KN</K>
    </I>
    <L>
       <J>10</J>
       <N>AA</N>
    </L>
    <L>
       <J>20</J>
       <N>BB</N>
    </L>
    <L>
       <J>30</J>
       <N>CC</N>
    </L>
    </C>
</A>
With the help of SDN I am able to gather the values of <D> <E> in one internal table.
Now if I need to gather
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
I am unable to do. I am following XSLT transformation method. If some one has some suggestions. Please help.
Here is my ABAP program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ITAB,
         D(10) TYPE C,
         E(10) TYPE C,
       END OF ITAB.
* Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_ITAB     TYPE STANDARD TABLE OF ts_ITAB,
      gs_ITAB     TYPE ts_ITAB.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab1
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IITAB".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'IITAB'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION zxslt
    SOURCE XML gt_itab1
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Now let's see what we got from the file
LOOP AT gt_ITAB INTO gs_ITAB.
WRITE: / 'D:', gs_ITAB-D.
WRITE: / 'E :', gs_ITAB-E.
ENDLOOP.
Transformation
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <IITAB>
          <xsl:apply-templates select="//C"/>
        </IITAB>
      </asx:values>
    </asx:abap>
</xsl:template>
<item>
      <D>
        <xsl:value-of select="D"/>
      </D>
      <E>
        <xsl:value-of select="E"/>
      </E>
    </item>
</xsl:template>
</xsl:transform>
Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
Kindly help.
Regards,
VS

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

Split XSLT Output into Multiple Files

I have an XML-to-File scenario working, but now I need to split my XSLT map output into multiple files based on the data. I have been reading the Jin Shin blog on message splitting, but don't know that it pertains to my situation.
XML data getting mapped with XSLT map creates output formatted like this.
<?xml version="1.0" encoding="utf-8"?>
<ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice">
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>15</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>1.25</UnitPrice>
</Details>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>002</LineItemNumber>
<UnitPrice>2.22</UnitPrice>
</Details>
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>16</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>3.33</UnitPrice>
</Details>
</ns1:ColdInvoiceData>
I currently have this output writing to a file (FTP, File Conversion). A single file is no issue, but I need to send multiple files for every set of HDR/DTL(s). I also need to put the invoice number in the filename (which is working fine as a parameter in my single FTP File CC now).
Can I make this happen with message splitting and maybe a second map (GUI map)? Do I need to adjust the XSLT output XML format to have an invoice level? Is there a better way to go?
Thanks!

I made a change to the namespace used on the Messages/Message1 nodes (since the system-assigned ns0 was already being used in my xml data) and now I am getting output.
The problem is that the output matches my input. As aforementioned, I started with just a one-to-one mapping on every node and field.
When I change the mapping to try to force multiple ColdInvoiceData nodes, I get the following error (when my source has two Invoice nodes):
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:ColdInvoiceData[2]/Invoice. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
When my source has one invoice node, it works ok.
Here is a screenshot of my mapping structure.
http://webpages.charter.net/kpwendel2/ib.jpg

Why does a mail-merge in MS Publisher split into multiple files when printed as a pdf file?

Why does a mail-merge in MS Publisher split into multiple files when printed as a pdf file?

'Cuz that's what mail merges do. They create multiple documents based on the parent doc and all the names/addresses in your data tables.
Perhaps if you describe exactly what you're trying to do & why you need PDF, we can point you to relevant tutorials.
Nancy O.

Split TempDB Data file into multiple files

Similar Messages

Maybe you are looking for