Split the Forum into new and Old

When Captivate 1 became Captivate 2, there was always the
question response from members "What Version are you running?"
This message board needs to be split into Older Posts and
Captivate 3. It would help everyone and the features of Captivate 3
could be dealt with in one place. Most of the web boards that I use
have several products listed and that includes versions that are
split so that users can focus on the version that they have.
There are many good posts and ideas here and we don't want to
lose the archives, but Captivate 3 will not have the same answers
as Captivate 2 and it is time to set this right, before the mess
continues. We've got a new version here and a chance to set this up
for that version.
Webmaster, the ball is in your court.
Joe C.

Hi Joe
And now, for alternate viewpoints...
I am severely on the fence with this suggestion. Part of me
agrees that it
could be helpful while the other part(s) scream(s)
{Expletive deleted} #@!! NO! I'll outline the arguments
swimming in my mind for each possibility.
Pros
For new users, it
might be helpful so that they can figure out where to post.
But most folks seem to do a pretty fair job of sorting that on
their own.
For those of us that have been around a while, it
might be helpful to know up front what is being dealt with.
Cons
For new users, it
might
not be helpful, as they will have to decide going in,
which version they are using. As many new users tend to pay little
attention to such things as forum guidelines and just wander into
the first category they find anyway, I doubt this will help at all.
I would guess it would just add another level of complexity that
would be frequently overlooked. Thus defeating the purpose.
For those of us that have been around a while, it will
definitely add yet one more place to monitor.
I think that Adobe is in the process of revamping the forums
anyway. One thing I would see as being a helpful addition would be
something like a FAQ page or category that could be either self
maintaining or maintained by the community experts. If we had this
available, we could frequently steer folks to this page. Hopefully
it would be the first page that would open anyway. Maybe even such
a page could further break issues and solutions into a "by version"
category.
Just a few thoughts... Rick

Similar Messages

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

Split the mileage into VAT and non VAT applicable -Travel Expenses

Dear all,
I need help from you in cofiguring the travel expenses for Input VAT i.e to split the mileage into VAT and non VAT applicable so that we can claim reimbursement from the govt. so how can we get this on the Travel Expenses form.
Pl. I need help on this.
Regards,
Sushma.

Dear Dominic,
Thank you for your suggestion, Could you pl. tell me where Can I create the additional Line Item, In which Transaction code it is? I can't able to see this additional line Item in T-code: PRFI or in TRIP.
Pl. suggest me the way, it is very urgent.
Thanks in advance,
Sushma.

Creating triggers in SQLJ using the keywords using :New and :Old

Hey all,
it seems that my SQLJ compiler treats the oracle value :New as if :New was a variable passed in through Java as opposed to being intrinsic to the database.
#sql {
CREATE OR REPLACE TRIGGER MyTrigger BEFORE INSERT OR UPDATE ON MyTable
DECLARE
BEGIN
select Value into :new.rowstamp from OtherTable;
END;
of course these are all dummy table and variables, but I just can't seem to get this to compile due to :New variable being treated as a variable that is passed through java.
any help would be greatly apperciated.

David,
Two years later... :-)
I assume you've already resolved this, but I figured this could help others that may encounter the same problem.
The only way I know to do this is to use native dynamic SQL (NDS).
For example:
#sql {
declare
L_SQL varchar2(2000);
begin
L_SQL :=
'create or replace trigger MY_TRIGGER
before insert or update on MY_TABLE
begin
select VALUE into :new.ROWSTAMP from OTHER_TABLE;
end;';
execute immediate L_SQL;
end;
};Good Luck,
Avi.

Just curious; new and old heatsink

hi,
does anyone know what is the difference between new and old heatsink that is replaced if someone has got rsd issue?

Someone posted this on MacInTouch yesterday:
"Today I received my replacement heat sink and installed it myself; I am a technician. The only noticeable difference in the replacement heat sink is that the thermal paste is pre applied to the heat sink and the thermal sensors circuitry on the underside of the heat sink looks a bit different. Apple has stopped replacing the logic boards as apparently the flaw lies in the heat sink itself.
So far no sudden shutdowns and I was previously getting between 3 (good day) 15 (bad day) a day."

I recently upgraded my old powerbook to an iMac. I've dumped the files of my backup drive into the new iMac. Is there a way to have access to all the files (new and old computers) when logged on as the same user vs. logging in and out to access each?

I am new to posting to this support community but have often referred to it for answers. So thank you all who've contributed; you've been a great help!
I recently upgraded my old powerbook to an iMac. I've dumped the files of my backup drive into the new iMac. Is there a way to have access to/merge all the files (new and old computers) together so when I'm logged in can access all the files.
Thanks!
M

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

:new and :old into record into record variable

Hi,
Can anyone tell me whether it is possible in 11g to copy the :new and :old records straight into record variables without having to explicitly copy every column?
I would prefer to write this:
create or replace trigger app1_tab1_biudr
before insert or update or delete
on table_1
as
declare
    r_tab1_old table_1%rowtype;
    r_tab1_new table_1%rowtype;
begin
     r_tab1_new := :new;
     r_tab1_old := :old;
end app1_tab1_biudr;instead of this
create or replace trigger app1_tab1_biudr
before insert or update or delete
on table_1
as
declare
    r_tab1_old table_1%rowtype;
    r_tab1_new table_1%rowtype;
begin
     r_tab1_new.col1 := :new.col1;
     r_tab1_new.col2 := :new.col2;
     r_tab1_new.col3 := :new.col3;
     -- ... etc.
     r_tab1_old.col1 := :old.col1;
     r_tab1_old.col2 := :old.col2;
     r_tab1_old.col3 := :old.col3;
     -- ... etc.
end app1_tab1_biudr;Why? This is nonsense example, of course, but when we apply this to our table API's, it would make a big difference in the length and maintainability of the code.
Thanks!
Remco

RemcoGoris wrote:
Hi,
Can anyone tell me whether it is possible in 11g to copy the :new and :old records straight into record variables without having to explicitly copy every column?I'm not sure with 11g if they've introduced it, but to the best of my knowledge, this has never been something that has been possible as the :new and :old are intrinsicly tied into the internals of the triggers (i.e. I think they, internally, hold more information about the changed rows than just being a simple rowtype structure)

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

HT3406 If I choose "restore from iTunes backup" to move everything from old phone. Will I still be able to use the old phone for music and apps? Can the old phone be docked up to the computer? Or will the new and old phone overwrite each other in some

If I choose "restore from iTunes backup" to move everything from old iphone to a new one, will I still be able to use the old phone for music and apps? Can the old phone be docked up to that same computer every now and then? Or will the new and old phone overwrite each other in some way? In other words, are the two phones treated as different devices when the "restore" option is used to set up the new phone? Thanks in advance.

Yes, you can use the old iPhone as an iPod touch.
Read this:
http://support.apple.com/kb/HT3406

I sold my iphone and the imessage are still coming in on my new and old Iphone. I can I solve this?

I sold my iphone and the imessage are still coming in on my new and old Iphone. I can I solve this?

And to add to what KiltedTim provided, http://support.apple.com/kb/TS5185

Suggestion to Moderators: time to split this forum into subjects

I think this forum went through significant activation and change since first initiated after SAPPHIRE 2010. As HANA went from the idea on the slide to real thing with many different aspects I think it is time to split this forum into few focused topics, e.g.:
- Business cases for in-memory technology
- SAP HANA platform and administration
- SAP HANA development (SQL, SQLScript etc)
- Data replication into SAP HANA (SLT, SyRS)
- SAP HANA Dev Center
- SAP HANA Security
etc.
BO integration with HANA should be in BO forums. BW-on-HANA should be in corresponding forums on BW and OS/DB migrations.
Thanks everyone for lively discussions (especially technical ones and contributing to this forum!
-Vitaliy

Hi Vitaliy,
Your suggestion makes perfect sense to me. However, as we are all waiting for the new SCN to launch, we should get prepared to do some re-org of the content on the new platform and not introduce another level of complexity here. I don't think a definite date has been announce yet, but we're getting closer to the final migration. At least the developer center will have it's own forum on the new platform. Plus, the new SCN will allow tagging of content, so it'll be much easier to keep things organized if we all show some discipline (and if we don't, separate forums won't help because without some discipline, people will post into whatever they find first)
cheers
--Juergen

Trigger how to get new and old value for nested table column?

Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
Lavan

Hi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter

Splitting the Company into Two Entities

Our company is currently using SAP ECC, SAP SCM and SAP CRM. We have planned to split the company into two to manage the existing two different businesses in separate landscape. (i.e business A & B are operated under one company code). In future state, business A and B will be operated in separate landscapes.
Has anyone carried out similar company split activities in the past? What are the challenges encountered in such a large transformation program? What are the key points to be considered in such transformation?

Hi,
That is one of the approach but it is very time consuming activity. Other thing I can suggest you to do the archiving of the data that is not required in the new landscape and then delete the data based on business process and other scenarios.
Check below 2 links:
http://service.sap.com/slo
SAP Demerger
Thanks
Sunny

Using correlation names :new and :old in ODBC

Does anyone know how to use correlation names :new and :old through an ODBC connection?
EG:
CREATE TRIGGER Print_Cust_changes
BEFORE INSERT ON CUST_tab
FOR EACH ROW
BEGIN
dbms_output.put('Adding: ' || :new.custid);
END;
When I try to do that using ODBC, I get this error:
Server Msg: 24344, State: HY000, [Oracle][ODBC][Ora]
Trigger, procedure or function created with PL/SQL compilation error(s).
And if I try and Insert I get:
Server Msg: 4098, State: HY000, [Oracle][ODBC][Ora]
ORA-04098: trigger 'BCL.PRINT_CUST_CHANGES' is invalid and failed re-validation
The same code works perfectly in SQL*Plus.

The plot thickens...
I just tried this code:
CREATE OR REPLACE TRIGGER Print_Cust_changes
BEFORE INSERT ON CUST_tab
FOR EACH ROW
BEGIN
INSERT INTO CUST_LOG VALUES('X');
END;
And received the same error:
Server Msg: 24344, State: HY000, [Oracle][ODBC][Ora]
Trigger, procedure or function created with PL/SQL compilation error(s).
Again, using the same code (Cut & Paste) in SQL*Plus, it works without any problems.
The ODBC function being used is: SQLExecuteDirect(), ODBC driver is SQLORA32.dll v9.02.00.00
CREATE TABLE, VIEW, INDEX etc, all work fine, but not a trigger. If I read the code back from ALL_TRIGGERS after using SQL*Plus or the console application to create the trigger, it is exactly the same code...

When importing a cd it splits the album into separate individual tracks instead of 1 album with numerouse tracks - how do I get them all together

When I import a CD from the Apple Mac drive it splits the cd into numerous single tracks in itunes instead of 1 album with all the tracks. How can I get it to import to the one place. I did try importing the same cd on a friends apple mac to see if it did the same thing and it imported the cd as 1 album with all tracks in there so I can't understand why it's separating them all.

This happens mostly when you import a compilation or a CD that is not noted in the Gracenote Database.
How to change back in one Album:
Mark all titles of that album (shift or cmd click)
Right click and choose "Get info"
Fill in the wanted name in "Album" and "Album Artist*"
Drag&Drop the wanted Album Art to the little window down right in that pane.
iTunes group and sort albums by that two entry's in the info pane. If the CD is not listed in the database but the titels, iTunes split the album to fit the titles to eventually matching albums of the artists.
Cheers - Lupunus
* If you import a compilation, choose "various artits" for the Album Artist field.
Message was edited by: lupunus

Split the Forum into new and Old

Similar Messages

Maybe you are looking for