Split the location of the Oracle software

Hi,
how to Split the location of the Oracle software distribution, redo logs, data files, and indexes onto separate disks
Thanks in advance

user9121291 wrote:
Hi,
how to Split the location of the Oracle software distribution, redo logs, data files, and indexes onto separate disks
Thanks in advanceNo need to distribute oracle software location, database only. Create tablespaces and locate their datafiles into different disks.

Similar Messages

Is it possible to change the location of the Oracle logo

I need to change the location of the Oracle logo in home page from left to right side. We tried to edit in common .css and failed. Please help.

The logo is in it's own table cell - so css will not work (can't change the order of table columns using css). You could possibly replace the logo image on the server with a single white pixel (create a custom skin if you want), then add a new background image to the table (class is HeaderTopBar) aligned right and no repeat using CSS. You would need to pad out that right side somehow to make it align (the last cell has class HeaderPageStatus and contains the status image).
Regards,
Robert

I need to know the location where iTunes downloads software to, it is filling up my hard drive.

I need to know the location where iTunes downloads software to, it is filling up my hard drive.
I am trying to put my iPhone4 into recovery and then will restore it. iTunes starts extracting the software. But the iPhone reboots and by the time the software has completed extraction, the iPhone can no longer be seen by iTunes.
We have a very small hard drive on our laptop. Each time iTunes does an extraction, it uses up more space on the C: drive.
Nothing frees up that used drive space. Not closing iTunes or rebooting the computer. Nothing.
How do we release / delete these files?

See Re: when itunes downloads ipsw where does it go.
tt2

Got prompt "the location of the document cannot be determined" then presentation GONE!

I'm freaking out! I hope someone can help.
I started getting the prompt "the location of the document cannot be determined" as well as asking me where the movie "VIBCPart1" was, which I thought was odd, as that was the name of the presention - not a movie file. Then Keynote froze - that is, I couldn't save anything and it making me force quit it, and I did.
When I went back to open it the entire preso was just gone - not in the folder at ALL. I did a search - nothing. I do have a duplicate for a backup but I did 12 hours of work on this project today - and I use Backblaze so Time Machine was turned off. And yep, there is some kind of problem with Backblaze! I await their response at this point.
I have a lot of videos in my Keynotes - I often split my presentations up into smaller parts because of that to avoid huge files. I suspect this one got big. In any case, if anyone has any ideas on recovery and how to avoid in the future, I'd be very grateful! Thank you in advance!

Only lately this started to happen to me as well. Problem happens in all iWork applications. Fortunately the apps never locked up completely.
When I try to save a document, I get the dialog that the location could no be found and whether I want to Save As... When doing a Save As the original file is still there and the dialog prompts for overwrite permission. I could save my documents. Just the other day Keynote magically found the document location again when I cancelled the dialog and then right clicked on the document title. The path to the document is correctly listed. I clicked the enclosing folder name on the popup (which did not open, resp. the Finder did not come to front), but a subsequent Save (command-S) worked
Very strange and deeply troubling.
Another observation: after it happended some days ago I ran Disk Utiltiy Verify and it found some problems, which I repaired successfully. Just now I had the very same issue again and right away ran a disk verify. AGAIN issues with the disk (Incorrect block cound for a file, volume bitmap needs minor repair for orphaned bocks, invalid volume free block count). Could this be SSD related (MBP Retina with 750GB original Apple SSD)?
Edit: some typos corrected

CDAUI1000 Error while trying to load data. Ensure that the system path includes the location of the WebAdminLib.dll.

Hello, been receiving this error in Desktop Admistrator Web admin. I have tried the fix where you change the environment variable path and delete the Team Admin folders, but still receive the error. Any ideas??
7.0(1)SR04ES02_Build023
Thanks

Hi All,
So to recap, these are the steps to be followed:
On the Unified CCX server, add the location of the WebAdminLib.dll
(C:\Program Files\Cisco\Desktop\bin) to the Path environment variable.
1. In Control panel, launch the System utility.
2. On the Advanced tab, click Environment Variables.
3. From the list of system variables, select Path and click Edit.
4. In the Variable value field, locate the string C:\Program
Files\Cisco\Desktop\bin; and, using cut/paste, move it to the beginning of
the variable value string. This results in the DLL being accessed from the
correct location.
5. Click OK and close the System utility.
6. Stop the Cisco Unified Node Manager.
7. On the Unified CCX server, delete the teamadmin folder from these
locations:
C:\Program Files\wfavvid\tomcat_appadmin\webapps
C:\Program Files\wfavvid\tomcat_appadmin\work\catalina\localhost
8. Restart the Unified Node Manager, and wait two minutes.
9. Access Cisco Desktop Administrator and verify that you can navigate to
the Services Configuration
Documentation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/
reference/guide/cad66ecd.pdf (pg 29)
In case this does not solve the issue, please verify if you are hitting the defect: CSCtr07664
Sometimes, the dll itself might be corrupted and thus the options in front of you are:
1) OS repair using the software disk
2) Rebuild the node
Regards,
Abhiram Kramadhati

How can I change the location of the iPAD backup

It is possible to change the location on the harddisk where iTunes is backuping the iPAD?
Thanks

are you looking to move the bloated Apple Computer\MobileSync\Backup file? i had this same problem (my iTunes points to an external drive, but the default Backup Profile is still stored locally, and with a 64GB iPhone, it's killing my hard drive. here's what i found!
there are several posts about this, none are apple sanctioned it appears, all work arounds. read these:
https://discussions.apple.com/thread/3100828?tstart=0
https://discussions.apple.com/message/16235234
https://discussions.apple.com/thread/2617941
https://discussions.apple.com/message/16438310
the last one has the most simple directions i think. here's the direct link to his blog post (i can't take credit!)
http://pep-p.com/wp/?p=44
basically you will "Create a symbolic directory link using the mklink command". no software to install, just a little dos editing.
best of luck!

Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)

Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)
I am looking for an option that will allow this on each of our documents for an easy access. It may already have an option, I am just unaware of it. Any help would be greatly appreciated.

For starters, can you tell us what software you are talking about? I can assume Adobe Reader but you use .xls in your example.
If you are talking about Adobe Reader and pdf files, then unfortunately the answer is no. If something else, please be descriptive about the issue so we can guide you to the right place.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

How do I change the location of the coldfusion-out.log and coldfusion-error.log files in CF10

When I change the log location in ColdFusion Administrator it changes the location of most but not all the log files. I have a requirement from my customer to place all log files on a separate partition on the server. For ColdFusion 9 I was able to modify the registry settings to change StandardOut and StandardErr for the ColdFusion Jrun service. This does not appear to the case for ColdFusion 10 which now uses Tomcat 7.
I tried modifying log4j.properties file and was able to relocate the hibernatesql.log, axis2.log, and esapiconfig.log but not the coldfusion-out.log.
I am running ColdFusion 10 Enterprise Edition on a 64-bit Windows 2008 Server.

The location of the rest of the ColdFusion logs can be changed in the ColdFusion Administrator. Go to the Debugging and Logging section, Logging Settings. There is a form at the top of the page where you can change the log storage location.
-Carl V.

How to get the Location of the Device

hi all,
I want to find out the Location of the MObile device.
I am trying to find out with the help of the Location API which was available in the CLDC 1.1.I am using the following code to get the Location
try{
     Criteria cr = new Criteria();
     cr.setHorizontalAccuracy(500);
     LocationProvider lp = LocationProvider.getInstance(cr);
     Location l = lp.getLocation(60);
     Coordinates c = l.getQualifiedCoordinates();
     if(c!=null)
     double lat = c.getLatitude();
     double alt = c.getAltitude();
     double lon = c.getLongitude();
     locate = c.convert(alt,1);
}catch(Exception e){System.out.println(e);}
I used a seperate thread to get the Location.The thread was running it was not diaplying any value(in the Emulator).Can anybody tell me the possible output when we use the Emulator.
Please help me,Thanks in advance
Lakshman

hi,
Even though the Nokia was the leaders of the JSR 179.but the Specification were developed by the sun.So to my knowledge the device which will support CLDC 1.1 will support my code.
at present i had a Blackberry 7100t,I have to check whether the device support the CLDC 1.1
can anybody please tell me what are the mobile devices that support the CLDC1.1?
lakshman

How can I find the location of the signature used in the Adobe Reader signature feature?

How can I find the location of the signature used in the Adobe Reader signature feature? I've been using the signature feature for a while now and it works great and I'd like to use it on another computer. However, I forgot where I stored the signature. Adobe finds it with no problems (the signature pops up when I click "Place Signature"), but I have no idea where it is.

Hello,
It's here - C:\Documents and Settings\username\Application Data\Adobe\Acrobat\10.0\Security\
For more information, please refer - Cannot create a digital ID/signature
~Deepak

Error saving: The location of the document " DOC NAME " cannot be determined.

I am having issues saving .pages files on to our network drive after upgrading to Mavericks and Pages 5.0.
A bunch of errors and issues occur when editing old or saving new pages files on our local SMB server. Saving files on to my local machine is fine.
I cannot save to the original network location at all. It errors: The location of the document "<DOC NAME>" cannot be determined. The folder in question has permissions that have always worked before the upgrade of mavericks/pages. I can rename the files in question, and save other types of files in to that folder without issue.
When it errors, it provides the option to Save as... this also fails, no matter where I try to save it to - local or network.
The auto-save feature fails for the same reason. This creates several temp folders with blank pages documents in it.
Most disturbingly, it appears to be destroying the original file by renaming it to a temp file, that is henceforth un-usable. Luckily Ive got backups of the documents.
Help!

Update:
The new version of Numbers also comes up with the same errors.
The previous version of both Pages and Numbers work absolutely fine still - have had to revert to using these for now.

The location of the document ... cannot be determined - file save fails.

I'm a bit stuck here.
I just got a new mac pro, installed Logic 9 on it.
When I try to save my progress in the proj I keep getting the message:
The location of the document ** cannot be determined.
You can specify where to save it.
Needless to say this is quite tedious and can't really fly.
When I opened Logic 8 that was installed on another drive (previous system)
I got the same message.
HOWEVER, when I login as 'root' user (super admin)
I'm able to save my work just fine, both on Logic 8 and 9.
Surely I'm missing on some unix / system / permissions thing here.
Is there anything that can be changed ?
cheers
Billet

I'm curious if you have changed your username recently? Perhaps Logic was installed by a different user? I've had a similar issue with pages and keynote which I had installed with a user in the admin group and login with a user in the staff group, which is the default user on Snow Leopard.
I have solved this by changing the permissions of the folder into which I wish to save my docs. Go to the folder above the folder you are saving to. For example, if you are saving to the /Users/you/Music/Logic folder then go to the Music folder.
From Utilities > Terminal:
sudo chmod -Rf 755 YOURFOLDERNAME
enter your admin password when prompted
For example I want to save to the desktop. I open the finder and go to my home directory then
sudo chmod -Rf 755 Desktop
That's it!
Message was edited by: S. Cantus

How to get the location of the browser?(pt_BR, en_US, es_ES...)

How to get the location of the browser?
example: pt_BR, en_US, es_ES...

Hi Eduardo Cordeiro,
Sorry in reaching you late...I was out on a trip...
You need to put the javascript in your Flex application html wrapper file ...in which your Flex application SWF is embedded.
Write the Javascript function in your html file as below :
function getBrowserLanguage()
var browserLanguage = navigator.browserLanguage;
return browserLanguage;
//In your mxml File you can access the JavaScript function in your MXML as below:
var browserLang:String = ExternalInterface.call('getBrowserType');
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

Split the location of the Oracle software

Similar Messages

Maybe you are looking for