Split up dashed line in segments
Hi,
I have a dashed line and I want to split this up into its single segments.
I tried to create the outlines of the path and released this group - but this was not the result I wanted: I still want single line segments that I can handle as a single line each. Is there a way to split a dashed line?
Thanks
Konrad
Instead of using dashes:
1. Draw one dash.
2. Store it as a Pattern Brush
3. Apply the Pattern Brush to a path.
4. Expand Appearance and Ungroup.
ALWAYS state what version of Illustrator you are using.
JET
Similar Messages
-
Dashed line / dotted line coupon effect? FCPX
Seeing if anyone has any tips or tricks on how to create a dashed line type of effect around an object in a video, making it look like a coupon or like it was cut out of paper?
The line doesn't necessarily progress around the object in the video -- it can be a static layer. Though, if anyone DOES have tips on animating the lines, that could be cool, too!
Thanks in advance.Familiar with Motion?
Draw a short horizontal line. Select the Anchor point tool and drag the center to the right end of the line you drew. Replicate the line. Change the Arrangement to Outline. In the Cell Controls section, check the Align Angle option.
You will now have a dashed outline rectangle. You can publish the Size parameter and change the size of the rectangle with the Width and Height parameters from Size. You can increase the number of line segments with the Points parameter and you can animate the outline with the Offset parameter (but there's a catch.)
When animating the offset, you will have line segments extend "outside" the base rectangle shape briefly (since they are aligned to the side they are attached to, then snap to another side when the anchor point changes over from one side to the next.)
To get around that, you need to create another rectangle that is 100 by 100 and link the Scale X and Scale Y parameters (separately) to the Width and Height of the Replicator (in the Link behavior, set the Scale to 10 for both.) Drag the rectangle onto the Replicator in the Layers List and hold until you get the popup menu -- select Add Mask to Object. [PS -- you should center the Replicator AND the rectangle before adding the rectangle as a mask!] [You can create a square rectangle then select the Shape > Geometry tab and type in the exact points: (-50, 50); (50, 50); (50, -50); (-50, -50) to create the exact size you need.]
If the mask is perfectly aligned, you can now animate the dashed line and it won't look weird. You can change the width and height of the replicator and the mask will change in perfect synchronization.
You can also make the dashes longer or shorter by manipulating the Scale X parameter in the Cell Controls of the Replicator. If you made the original line white, you can colorize from the Cell Controls as well.
After that, you'll need to figure out if you want a solid color background; a drop zone or effect source/title background; what kind of text you want inside the dashed outline (or you can manually place a Basic Title in FCPX if you like); etc...
Hope this helps... If you need further help with this, let me know. -
Dashed line with more dashes: intermittent stream
The standard symbol for a stream on topographic maps is a blue line.
The standard symbol for an intermittent stream on topographic maps is a a blue line, with long segments interrupted regularly with a series of three dots. I can create a dashed line interrupted by two dots, but there aren't enough boxes for me to specify the third dot.
Any suggestions on the best way to accomplish this?
Thanks.I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result: -
Dashed Line Setting Not Working
I have a graph (I've ungrouped it, it is no longer a graph as far as AI is concerned) that I'm trying to get a dashed line: it doesn't work. I'm uploading screenshots to show I'm not completly crazy.
BTW that is a very small segment of a path?
But if thge Dash feature is not relly working and you do not have two strokes applied to one path then perhaps the preferences are corrupt.
Try this
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS6 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file. -
Importing CAD files into Illustrator CS3 - does'nt scale dashed lines
In CS2 you could import a CAD file and it would scale dashed lines.
In CS3, Illustrator no longer does this. It scales the stroke weight, but does not recognize the dashed line information.
Is there a solution to this?
Thank youYou can expand dashed lines first and then scale them.
Then you will get a whole bunch of vector objects, one for each dash.
I am not very familiar with CAD, but I know that imported CAD files are sometimes fiendishly difficult to edit because vector lines are often in small pieces that don't join up properly.
So I reckon Expand on all lines and then judicious Unite in Pathfinder would probably be the best way of going about things. Unite makes Compounds of closed paths so you have to be careful, otherwise you might get a huge file that won't print without splitting.
But remember that once you've expanded the lines you won't be able to edit their weight.
Does this help? -
FM to change / split SD schedule lines in batch
Dear all,
Following scenario:
Material A: Current available stock: 1000 pcs,
Purchase Order 10000 pcs arriving on 01.09.06
SD order with 2000 pcs.
When I run the availability check for the SD order in VA01, the system would create 2 schedule lines: 1000 pcs today & 1000 pcs 01.09.06.
We would like to use a batch program instead of the online availability check in order to calculate the confirmed qty. based on our rules.
What I'm looking for is a FM / BAPI which allows the created more than one schedule line and pass the confirmed quantity, eg. 900 pcs scheduled for today and 1100 pcs scheduled for 01.09.06 .
I tried FM SD_BACKORDER_UPDATE but it allows only to pass one quantity per item line and does not split the schedule lines.
I also tried BAPI_SALESORDER_CHANGE but it does not allow to pass the confirmed qty. ( It changes the order line qty.)
Any idea welcome......
Regards
HeinzHi Heinz,
In the sales order you can go to the Item -> Schedule lines and you can split it.
Did you resolved if so shall i know how.
Regards
Agasthuri Doss -
Need to Split Sales Order Line Item in VA01
Hi,
I have a requirement in which i have to split an order line item for KMAT materail number. system popup configurable screen, here all the required characteristic values have to be selected as per the customer requirement.
After entering all the required customer specific characteristic values, system determines batch automatically. If characteristic values of the Batch matches with the characteristic values of configurable screen selected in the sales order
Here also we have to check the sales Order Quantity (VBAP u2013 KWMENG) and order Confirmed quantity (VBEP u2013 BMENG), if the both the quantities are not same, consider order has partially confirmed.
If Order quantity is partially confirmed, check for the batches with the same characteristic values of the quotation configurable screen and if batch found, system has to create a one more line item and new batch has to be assigned to create line item.
Reduce the order quantity equal to the confirmation quantity in the first line item.
Create a new line item in the quotation, copy all the remaining unconfirmed quantity from the first line item and also copy all the characteristics and properties (item category, schedule line category, business data, item data, and requirement type) and assign the batch to the new line item. System does the availability check automatically and confirms.
In another scenario system doesnu2019t find batch, in this case capable to promise has to trigger directly.
Here we have to check the Order confirmed quantity, if confirmed quantity is equal to zero.
Change the item category of the line item, due to which system determines different Requirement type and schedule line category.
Based on the Requirement type system triggers the capable to promise.
I would lke to know which is the suitable user eixt or BADI to split the line items and what all the tables or structures i need to populate in order to create a new line item successfully.
I have seen many post in sdn but no body gives the right user exit name where i can add new line item.
Regards,Hi Amit,
Thanks for your reply. In this scenario configurable material is involved. And first Make to Stock scenario is executed to check any material with customer entered characteristics are avialable. If its so it will determine its batch and assigned the quantity.
If zero quantity is assigned or no quantity is assigned then I have to trigger the Make to Order scenario for rest of unconfirmed quantities in order.
I have check it in USEREXIT_MOVE_FIELD_TO_VBAP but it was of no use. I even tried in USEREXIT_CHECK_VBAP but still no result. I am not sure what all the tables and structures i need to populate there.
Regards, -
How to display the data in PDF format : problem is splitting into 2 lines
Hi ,
I developed one report which downloads the data into PDF format and saved in C drive but my problem is
in my program : Line size of the report is 255 in PDF it is splitting into 2 lines. it has to show in a single line. how to do it. how to reduce the width of the output? i am sending my code below. anybody can suggest me how to do it. if possible please send me the code.
my code:
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
vbeln type vbak-vbeln,
ERDAT type vbak-erdat,
ERZET type vbak-erzet,
ERNAM type vbak-ernam,
ANGDT type vbak-angdt,
BNDDT type vbak-bnddt,
AUDAT type vbak-audat,
VBTYP type vbak-vbtyp,
TRVOG type vbak-trvog,
AUART type vbak-auart,
AUGRU type vbak-augru,
GWLDT type vbak-gwldt,
SUBMI type vbak-submi,
LIFSK type vbak-lifsk,
FAKSK type vbak-faksk,
NETWR type vbak-netwr,
WAERK type vbak-waerk,
VKORG type vbak-vkorg,
end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
arcpar TYPE arc_params,
lay TYPE pri_params-paart,
lines TYPE pri_params-linct,
rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
'Date','Document Date','SD document category','Transaction group','Sales Document Type',
'Order reason'.
start-OF-SELECTION.
select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
FAKSK NETWR WAERK VKORG from vbak
into table itab
where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = dest
no_dialog = 'X'
immediately = ' '
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
no_dialog = 'X'
list_name = name
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
itab-ERDAT,
itab-ERZET,
itab-ERNAM,
itab-ANGDT,
itab-BNDDT,
itab-AUDAT,
itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spono
no_dialog = 'X'
TABLES
pdf = i_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
thanks,
maheedharhi tripat,
actual problem is what u said it is decreased the wiidht of the output.
now the output is:
Sales Document C Date Entry time Created By Quotation date Date Document Date
SD document category Transaction group Sales Document Type Order reason
62741 07/29/1996 11:54:38 DARLENE 00/00/0000 00/00/0000 07/29/1996 C
actual output is:
output should come in a single line. it is splitting into 2 lines.
thanks,
maheedhar -
How to change draw dashed line with arrowhead (not straight)?
Hi friends,
The following code sinept draws an arrowed line from a given point to the other point. I want to know how it can changed to be dashed line as well? I would appreciate it if anybody help me for doing such changes.
Thanks in advance,
Reza_mp
import javax.swing.*;
import java.awt.*;
import java.util.ArrayList;
public class ArrowExample extends JFrame
enum ArrowHead {
HEIGHT(10), WIDTH(10);
int n;
ArrowHead(int n) {this.n = n;}
public int value() {return n;}
java.util.List<Arrow> arrows;
BasicStroke stroke;
private class Arrow {
Point start;
Point end;
Polygon arrowHead;
public Arrow(Point start, Point end) {
this.start = start;
this.end = end;
double direction = Math.atan2(end.y - start.y, end.x - start.x);
System.out.println(direction * 180/Math.PI);
arrowHead = new Polygon();
arrowHead.addPoint(0, 0);
Point p1 = rotate(ArrowHead.WIDTH.value()/2, ArrowHead.HEIGHT.value(), direction);
arrowHead.addPoint(p1.x, p1.y);
Point p2 = rotate(-ArrowHead.WIDTH.value()/2, ArrowHead.HEIGHT.value(), direction);
arrowHead.addPoint(p2.x, p2.y);
arrowHead.addPoint(0, 0);
arrowHead.translate(end.x, end.y);
public Point rotate(int x, int y, double dir) {
Point p = new Point();
double r = Math.sqrt(x*x + y*y);
double theta = Math.atan2(y, x);
p.setLocation(Math.round(r*Math.cos(theta + dir + Math.PI/2)),
Math.round(r*Math.sin(theta + dir + Math.PI/2)));
return p;
public void draw(Graphics2D g) {
g.drawLine(start.x, start.y, end.x, end.y);
g.drawPolygon(arrowHead);
g.fillPolygon(arrowHead);
public ArrowExample() {
super("Arrows");
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel p = new JPanel() {
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2d = (Graphics2D)g;
Stroke oldStroke = g2d.getStroke();
Color oldColor = g2d.getColor();
g2d.setStroke(stroke);
g2d.setColor(Color.black);
for (Arrow a : arrows)
a.draw(g2d);
g2d.setStroke(oldStroke);
g2d.setColor(oldColor);
p.setBackground(Color.white);
add(p, BorderLayout.CENTER);
stroke = new BasicStroke(3);
arrows = new ArrayList<Arrow>();
arrows.add(new Arrow(new Point(10,10), new Point(100,100)));
arrows.add(new Arrow(new Point(300,10), new Point(300,100)));
arrows.add(new Arrow(new Point(450,450), new Point(400,100)));
pack();
setSize(500, 500);
public static void main(String[] args) {
setDefaultLookAndFeelDecorated(true);
SwingUtilities.invokeLater(new Runnable() {
public void run() {
new ArrowExample().setVisible(true);
}Change the draw method as follows:
public void draw(Graphics2D g) {
Stroke s = g.getStroke();
g.setStroke( new BasicStroke( 3.0f, BasicStroke.CAP_BUTT,
BasicStroke.JOIN_MITER, 1.0f, new float[] { 10.0f, 10.0f }, 0.0f ) );
g.drawLine(start.x, start.y, end.x, end.y);
g.setStroke( s );
g.drawPolygon(arrowHead);
g.fillPolygon(arrowHead);
} -
Problem with dashed line spacing when printing to pdf
Hi all,
this may be a problem with my pdf program (I use bluebeam), but maybe someone will have an idea how to fix it whether in indesign or bluebeam.
so I made a dashed line using the stroke command in indesign. I need to have the spacing set to 3pt dash and 2pt space. I also need to keep the lineweight to 0.5...this all works fine and appears correctly in indesign when I preview
the problem is that some of the dashed lines, but not all of them, change size and spacing in the pdf when I view it. it seems to change when I zoom in and out as well. I thought maybe this was just some odd feature with bluebeam and it would still print to the correct size, but it does not, it prints the lines as different sizes. does anyone have an idea why this happens and how to fix? ive viewed and printed from adobe reader and it seems to be okay there but this file will be accessed by multiple other people and they may not be opening and printing in adobe reader..
thanks guysWhen you export a PDF you will notice that you are exporting to Adobe PDF. Using any reader beyond Acrobat Pro or Reader is a crapshoot.
For issues with Bluebeam I suggest you contact the developer. -
Free Goods sub item split in two line items
Sir,
I give free good along with sale item ,but i want free goods quantity split in two lines ,so how I do that?
Please help .Hi,
Free goods has the following limitations:
- Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
- Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
- Free goods are only supported for sales orders with document category C (for example, not quotations).
- Free goods are not supported for deliveries without reference to a sales order.
- Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
- If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Not all Sales Order can be used for free goods determination. You have to check the SD document category if it does not work. Only category 'C' are supported. Check transaction VOV8.
Assume that you want to configure an inclusive FREE goods routine. Customers must order a minumum quantity of 5 before any free goods can be assign. For every quantity of 3, the customer will be given 1 free goods.
WC07 - Maintain Number Range Intervals
e.g.
No From number To number
01 0000010000 0000099999
IMG -> Sales and Distribution -> Basic Functions -> Free Goods ->
Maintain Access Sequences
New Entries
Acsq
NA00
Save
Maintain Condition Types
New Entries
Ctyp Name AcSq
FREE Free Goods NA00
Save
Maintain Pricing Procedures
Procedures
New Entries
Procedure Description
FREE Free Goods
Select Procedure FREE then click Control data
Step Cntr Ctyp
10 10 FREE
V/N6 - Activate Free Goods Determination
Assign Order Type OR with Document Procedure A with Procedure FREE
VBN1 - Create free goods determination
e.g. FREE inclusive
Material Min qty From are free good Calc Rule Free Goods
5 3 1 1 1
In this example, if you create a Sales Order for a quantity of 10, SAP will prompt you 7 as the customer order qty and 3 will be free. Customer only pay for the 7 quantity
Hopefully this will help to resolve the answer.
Thanks & regards,
Pankaj Mahajan
Edited by: PM on Apr 13, 2010 10:28 AM -
Drawing dashed line or dotted line in a flex line chart
Friends,
I want to draw a line chart which should be either dotted or dashed.
since there is no component like dashed line chart, can anyone help me in creating one.
i think if i extend the line series component, then i can draw that.
but am stuck there. pls help people.
Regards,
AnoopTry looking [url http://www.macdevcenter.com/pub/a/mac/2002/03/22/vertical_text.html]here.
: jay -
Illustrator CS2 adds mysterious white dashed line thru my linked Photoshop file
Im using Windows XP, Illustrator & Photoshop CS2, Acrobat 7.0 Professional.
I have an illustrator file with a linked PSD file that has this mysterious thin white dashed line going through the entire image & I have no idea what it's from or how to repair it.
My trouble shooting thus far includes:
- In illustrator - I hide all the layers to see if there was an odd graphic on another layer that was causing the line, nothing. I tried to select the dashed line, not possible. I've created a PDF of the file, and the dashed line is in the PDF too (to verify it wasn't just Illustrator). Oddly in both Acrobat & Illustrator when I zoom in & zoom out, the dashes maintain their on-screen viewing proportions (like the dash spaces recalculate to the same tiny thin dashed line no matter what zoom Im at)
- In Photoshop - I zoomed in until I couldn't zoom no more and there is not the slightest dashed line in the graphic.
Lastly, I have this exact linked setup repeated throughout several different files (basically its the same ad but laid out to different dimensions for each)... and none of the others have this mysterious white dashed line.
here's a screen capture from Acrobat... zoomed into 6400%
argh - can someone help? Thanks!
kristinHi guys (and sorry for the tremendous delayed response).
No the line doesn't print on my local b/w laser printer. However I have seen the lines print in 1 newspaper publications... (this is out of 50 different publications)
Yes, the image is rotated slightly in illustrator, and I always flatten prior to making the PDF (cuz of the transparency/drop shadow).
It's really making me nervous that ALL our ads have these lines appearing during onscreen viewing... Im making a new batch of ads for our campaign & there are more lines than before!
Any tips theories remedies my friends? -
AR - Requirement to split the receivable line
As part of implementing OrderToCash for an international shipping company, we have a unique requirement to split the receivable line with respect to the number of revenue lines.
Due to the accounting doc having one receivable line, we are facing challenges in applying cash and disputing at the individual line item (shipment level).
We effectively need there to be a 1:1 relationship between a Billing document line and an AR invoice line (currently the AR receivable line is a cumulation of the Billing lines). This said, is there any configuration or user-exit on the SD or AR side to split the receivable line (at the time of releasing it to accounting) even though it is hitting the same reconciliation account?
Thanks,
AnthonyHi Anthony
I know that when you enter FI side invoice we can use the 'Amount split' tab on FB70 or FB60 screen after entering the total amount in the 'Basic data' tab.
But I am not sure how to enable it when using copy control from delivery to billing to accounting.
Assign points if useful...
Thanks -
Hi all, Is there a way to make the end caps of an imported
dashed line (say from Illustrator or Canvas) straight? They seem to
always come out round.
I have tried making them straight lines instead of dashed
both before and after importing them to Flash but the end caps
still come out rounded. Flash does not let me change the end caps
of dashed lines at all. So even if I set it correctly when it's
still a straight line, as soon as I turn it into a dashed line, it
turns round and I can't change it.
Very frustrating.
Thanks for your help,
AryehSeems like an oversight from Adobe to me. Submit a bug report
at the following address, and maybe they will add that
functionality.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Maybe you are looking for
-
After updating to Flash version 11.6.602.171 - can no longer play any embedded videos..and worse
To begin with, I'm running a clean AMD 64 Bit Windows 7 System. Never any problems with any of my video playing scenarios - until now - with this version 11.6.602.171. After downloading and installing both versions - both for Firefox (other browsers
-
Firefox 4.1 and Firefox 11.1 do not work correctly on my systems
<pre><nowiki>From : <[email protected]> To : support.mozilla.com Subject : Firefox Version 11.1 Does Not Work for Me Date : Sat, 24 Mar 2012 18:45:39 GMT Spell Check in your version 11.1 is just as impeding in my three systems as was 4.1. (Note t
-
I have attempted to use Google , MapQuest and Yahoo map and directions and cannot view the resulting directions because a message appears on the screen requiring me to download MapsGalaxy for Firefox toolbar. I am happy with what I can do currently w
-
I'm trying to downloaded the 10.1.2.0.2 version of J2EE container and I get into this endless loop of it asking me to 'accept' the terms of agreement. No matter what I do, the 'I ACCEPT" button is either not enabled, or I get into the screen where it
-
i just updated my ipad 2 to iOS 8 and suddenly my iPad decreases in battery life instead of increase, I changed it over night but it Went down to 20%. please don't tell me I need a new cord or need to get the latest one I have gotten a new charger co