Split valuation for Finished goods.

Hello All,
I have an FG which is produced inhouse and also subcontracted.
While implementation the subcontracting scenario was never considered.
Now we have stocks and production orders for that FG and hence split valuation cannot be activated.
Is there any other way out so that I can value the stock seperately for inhouse production and subcontracting in the current situation.
Regards
Vijay Singh.

hi
Split valuation is used for maintaining two different price for same material.
ex:-if you are manufacturing a material, ur manufacturing "X" price is Rs.100/-> But you got order of 100T. But you plant manufactruing capacity is 50T,But you do not want to lose the order,so you procure material "X" from vendor at Rs.110/- to meet customer demand.In this case you have use Split valuation ie.....same material but maintaining two different prices.
The Split Valuation settings are as follows:
1.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Acitvate Split Valuation
2.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Configure Split Valuation
Click on Golbal type: create your own valuation types as Type 1, Type 2 etc
Click on Global categories:create your own Valuation Category as Type(T) and
Activate all valuation types(Type1, Type2 ) for your category(T)
regards
kunal
award if helpful

Similar Messages

Split valuation for Finished Goods - Target cost was not updated

Hi,
We are following split valuation for 'Finished goods'.
Valuation typte 1 is for 'manufacture' and
Valuation type 2 is for 'External procurement'
For production orders with this material, we are not getting target costs. It is showing zero.
We have done release of standard cost estimate before creation of production orders and goods receipt for these orders. But still it is not updating.
Pls guide me.
Regards
MadhuSekhar Gupta

Hi,
Thanks for your reply.
At the time of variance calculation only the credit part of target cost will update and at the time of goods receipt debit part of the target cost will update.
Our client has done goods receipt but debit part of the target cost was not updated. and the order status is DLV.
I simulated the scenario in QAS by creating new finished goods materials (Industry-Construction) one is with split valuation and another is without split valuation, then the debit part of target cost was updated at the time of goods receipt and credit part was updated at the time of variance calculation for both the materials. So this problem was not arised because of split valuation.
Was this problem arising because of the material master data, because for one material it is updating and for another it is not for the same configuration?
Regards
MadhuSekhar Gupta
Edited by: gms gupta on Oct 22, 2011 3:39 PM
Edited by: gms gupta on Oct 22, 2011 3:41 PM

Split valuation for non-valuated materials

Hi dudes,
We are implementing SAP for our Subcontractor.
our SC receive all components from our company ( on free ) but sometimes they purchase the same material themselves for other uses. so we decided to use split valuation to separate valuated and non-valuated materials.
I did configuration and created 2 valuation type ( valuated - nonvaluated )
when I create Purchase order it askes for valuation type but even when I use non-valuation type in PO it asks for price!!!!
do any of you have used split valuation for this target?
have the same problem?
what should I do actually??

Hi,
Is someone in the subcontracting plant going to do a process order on the materials you send them? Or are you only going to track the finished inventory once it reaches your plant?
In the first case:
1) Create a STO to the SC plant. This stock will have to be priced.
2) Inventory reaches SC plant. They perform production process.
3) finished inventory is sent using another STO.
2nd Case:
1) Create a SC vendor using the SC plant as a vendor.
2) Create a SC PO to this vendor using this vendor and transfer goods to him. In this case, goods are transferred for 'free' as they really belong to you and not to the SC
3) Once the production process is over and the finished product is sent back to you, do a GR. The raw material sent to the SC will be consumed.

Split valuation for batches

Hi
When Iam going to valuate the material with split valuation with batches. I have around 100 batches/grades of finished product. For evaluating Variances for the batches/Product with batches, what could be the best procedure. Shall i make Versions for all the batches of each material and make procurement/production alternatives. If you have worked on the this scenario please share with me.
Thanks
Vasu

Hi,
You can use concept of Split Valuation for this.
For such materials, use Valuation Category "X" in Accounting1 view of Material Mater.
As a result, after every GR of this material, batch will get created as Valuation Type and will store its value separately (not MAP) and will get issued with this value only at the time of Goods Issue. (System will ask Batch and automatically take the valuation type aslo which is nothing but Batch No only)
Go to OMWC to check the attributes of Valuation Category "X"

Year end Valuation of Finished Goods

Hi
We have an issue with respect to valuation of Finished Goods. As of fiscal year, there is some stock of Finished Goods, which is valuated at a certain price. On the first day of the next financial year, we run the standard cost estimate, release it, which would change the price in the material master. however, the stock declared at the end of financial year, cannot be changed in the next financial year. The change should be applicable only for the stock produced in the next financial year. How can we account for it?
Regards
Sanil Bhandari

Dear Sanil,
Try to use MR21. This revaluate the material based on the closing stock as on date, irrespective of produced date.
Hope this could help you out.
Regards
Ashok kumar

If Excise invoice required for finished goods.

Hi All
I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
Can you advise please.
Regards
Mukta

HI
Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with 'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
Run time error is saying -
Short text
    Structure-type conflict when calling a FORM
What happened?
    Error in the ABAP Application Program
    The current ABAP program "J_1IRUTZ" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Can some one suggest if we need to apply any OSS NOTE.
Regards
Mukta

Validation of batch nos. in migo for finished goods (fert)

I want to validate batch number entered by user at the time of migo for finished goods (fert) against the batchs in mcha. how can i do this? also is it possible to give f4 help to user for available bach nos. for the particular material ?

Hi,
Cannot you use message M7 668 for this purpose?
Problem is "batch has been already posted in stock"
Regards,
Csaba

How to get unit cost for finished goods in prod order

HI all,
IN a production order of type PP04, there is cost analysis you can get from CO03. This shows the cost for finished goods and BOM components. Would anyone know how the cost for finished goods are calculated ? The issue i have is that the unit cost of the finished goods is not correct. It is higher than what it should be. I looked at the moving avg price at material master but the cost used in calculation is different than in material master. Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ? Where is the higher cost coming from for finished goods material as shown in CO03 ? The BOM materials are picking unit cost correctly. Would this have anything to do with cost settlement ?
thank you.
joyce

Hi,
Finished goods price will depend on BOM componenet price, activity price and overhead price. Check whether this prices are picking correctly or not.
Regards,
Sreekanth

PO for Finished Goods with Tax Code - Inventorise

Hi All,
Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO2). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO2). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
I had followed the following steps.
1) Material code- Chapter id maintained in J1ID
2) Vendor code excisable in J1ID
3) Maintain condition record in FV11 for the correct validity period
4) Check the PO creation date whcih should fall between condition record validity period
Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
I am not able to identify what is happening.
I will give the flow so that you can help me out.
1. Created Material - Finished with all views except - Classification, Forecasting,
Work Scheduling & QM
2. Create Info Record - Tax Code given
3. J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
4. FV11 - Maintained till - 31.12.9999.
5. FTXP - Tax Code is Maintained & it's working fine with other PO.
6. ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
7. In J1ID cenvat determination has been maintained.
Also the material type should be raw in material chapter id combination instead of RG1 even though the material is finished to take credit of excise it should be maintained as RAW .
Over Here if i see i am not able to capture (JMO2 A/P Eduty for Inven 0.000%) &
For Sale tax i have maintained it in FTXP as (A/P C Sales Tax Inv NVV 12.500% JIP1) but it is not appering in PO Tax code. I can See the sale tax is geting updated in Tax code for Inventorise if i give it with out ED in tax code. With ED it is not Appering in Taxcode.
Can you help me resolving the issue.
Once again thanks for youre help.
Thanks in Advance,
sapuser.
Edited by: sapuser on Dec 26, 2008 10:10 AM

Hi All,
Just give a check by entering cenvat determination table. System checks this by default for excise details. Enter i/p and o/p material as same.
Hope this will resolve you Problem,
Pherasath

Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

Hello Production Planning experts,
I'm looking to solve the current business problem:
The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's APO. They run a batch job to query Sales Orders, Deliveries, available stock, stock in transit, etc. from sap and feed/upload it to the third party software so it can calculate the Finished Goods Production Requirements for them. They love the third party software, so replacing it is not an option. Since the third party software is already taking into account Sales Orders, Deliveries, available stock, stock in transit, etc. from SAP, it just outputs a "Finished Goods Production Schedule" by week.
My questions are:
1) What's the best way to upload something like that in SAP in the form of Planned Orders or something of that nature?
After i get that schedule in SAP:
2) Is there any way to calculate components' requirements for that "Finished Goods Production Schedule" alone? The company would like to IGNORE existing stock AND expected-goods-issues in the future (sales orders, deliveries, etc) for Finished Goods ONLY. The components calculations would work the standard MRP way, taking into account existing stock and AND expected-goods-issues in the future (sales orders, deliveries, etc)
I started looking into Master Production Schedule (MPS), but I don't know if that's the right approach since I'm not very familiar with it.
Thanks in Advance! I will gladly reward points for helpful/correct answers.

Hello Oscar
I suggest you to upload your production plan in the for of "Planned Independent Requirements" using BAPI BAPI_REQUIREMENTS_CREATE. Later, MRP will create planned orders to cover the PIRs.
If you don't want to consider the existing stock of the finished product, you should use the planning strategy 11 to create your PIRs. Take a look on the following link for more details about this planning strategy:
Gross Requirements Planning (11) - Demand Management (PP-MP-DEM) - SAP Library
Here you will find the following information:
The make-to-stock strategy gross requirements planning is particularly useful in mass production environments; it is often combined with repetitive manufacturing. This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
This strategy is also frequently used if there is a Material Requirements Planning system in a legacy system that needs to be linked to an SAP system which serves as a production execution system. The legacy system calculates a specific production plan, which has to be executed, regardless of the stock situation in the SAP system
It looks like this planning strategy is exactly what you are looking for.
BR
Caetano

How to activate split valuation for existing material having stock open PO,

Hello,
How to activate split valuation for existing material in plant having stock and open PR,PO and Production order.
Regards

Hi
It is not possible to activate in such case, u should not have any stock.
With regards
Pavan

Split valuation for material with two different price indicator S and V

Hello Gurus,
Is it possible to maintain split valuation for same material with two different price indicator S and V.
For Ex. Material A is manufactured can be manufactured in house , procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
We want to keep Price control V for same material " A" which is procured from outside vendor.
And price control S for inhouse produced same material " A".
Besically this material is semifinished and having BOM for subcontracting.
Please advice.

Hi
When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
Regards
Prasad

Activating split valuation for existing material code

All SAP Gurus,
We have certain material codes in ROH and HALB material types in a plant.
We are doing external procurement as well as inter-company stock transfer (STO) of the same materials.
We want to keep the separate accounting of the material which is procured from out side and which has been received through STO.
As the material codes are same, in my view only solution is to have split valuation for these materials.
Now, as the materials are already in use since very long, will it be possible to actvate split valuation for these materials?
If yes then how?
Is there any alternate way to tackle with the problem?
Regards,

Hi,
Better you go with Split Valuation. But Before u go to split valution u have u clear all Pending Documents for that material.
U must not have stock in for that particular material.
In Split valuation, use material Valutaion type STO or External procurements.
Donot make any of the Valuation Type as Default....it will create problem in Future.
Hope Help u !
REgards,
Pardeep Malik

Discontinuity and Follow-up Materials for Finish Goods

Dear all,
We have used for a long time the Discontinuity functionality and Follow-up Materials for Raw and Packaging materials (components in BOMs).
We would like to use the same functionalities for Finish Goods, but after setting fields in MRP4 View, it seems not to work as it did for components.
Is it possible to reproduce the same effect in Finish Goods as we had with components, i.e., use some kind of Discontinuity and Follow-up materials for Finish Goods?
We currently work with R/3 V.4.7.
Thank you all in advance for any support.
Best Regards,
Alberto

Dear Alberto,
If my understanding is correct then this discontinued material concept works only for the components and not for the finished
product during MRP.
Discontinuation Data Use
In MRP, the discontinuation functionality is used to transfer dependent requirements of a component to one or several follow-up
materials, if the requirements are no longer covered by stock. You can also define a follow-up material in the bill of material.
Check this link to explore more.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/b1/c044d1439a11d189410000e829fbbd/frameset.htm
Regards
Mangalraj.S

Re: Automatic Reorder point Planning for Finished Goods

Hi All,
I have some doubts regrading the Automatic Reorder point Planning for Finished Goods.
For testing purpose I have entered the consumption values for two month.
Say :
Nov-08=13
Dec-08=20
ROL level=5
Safety stock =4
Model =constant
Now when I execute the forecasting,The system gives me the forcast for the next two month jan & Feb.
But when I run the MRP I see planned order for 5.So how to fulfill my forecast for jan?
Please Advice.
Regards,
Vivek

Hi Brahamakar,
Can you please help me.
Regards
Vivek

Split valuation for Finished goods.

Similar Messages

Maybe you are looking for