Split valuation, valuation type

dear sap gurus i am facing the follwing problem in split valuation please any one advise me
valuation record 1177 1112 does not exist
mess no- M 7077
for material 1177 the valuation type AUSLAND does not exist
thanks in advance

Hi
You are right that spilt valution needs to be activated first.Then you need to create the valution category / valution type i.e
Ausland .You have to assign this valution type to your valution category .Please make this check.If this correct then valution category must be activated for the valution area ( Plant).
If everything is ok.
Then when you have to create header record for the valution category by filling valution category in the acoounting view of MM.
Then go to MM01 give your material code and then create the record for the type give your valution type and make reguired entry .
your problem will b resolved.
regards sunny

Similar Messages

VPRS shows no Value with Split Valuation - Valuation Category X

After configuring Split Valuation - Valuation Category X (http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=193693045)
VPRS is no longer showing any Value in the Sales Order. I have assigned a Batch in the Sales Order and tried to Deliver and VPRS still shows as 0.
VPRS is working correctly for Material that are not maintained at Valuation Category X.
Also, I have the Price maintained as Moving Average Price for the Materials with Val Cat = X.
Does anyone have any ideas? Please I would appreciate the feedback.

Thank you for the quick response.
After check MBEW i was able to see that my new Batches were being assigned a Standard Price instead of MAP.
I changed the settings in the Attributes of my Material Type to set the Price to MAP instead of Standard.
Now it works perfectly - Thanks!

How to get the split period wage type amount in payslip?

How to get the split period wage type amount in payslip?
Payroll period for 01.01.09 to 31.01.09.
1.     Employee is active from 1.1.09 to 10.01.09
2.     Employee is inactive from 11.01.09 to 20.01.09
3.     Employee is again active from 21.01.09 to 31.01.09
In Result Table three split periods are created.
From 01.01.09 to 10.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 20.00
From 11.01.09 to 20.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 00.00
From 21.01.09 to 31.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 10.00
My requirement is to print only the last split period in payslip from 21.01.09 to 31.01.09. May you please help me in this regard.
Thanks in advance
Regards,
Rajesh.

Hi
Try to read the below:
WPBPC : Distribute Lump Sum Wage Elements to WPBP Periods
Object
    Operation
Use
    Operation WPBPC distributes the amount of the current wage type to the
    active WPBP periods in the payroll period.
Input
    The current wage type in the header entry of table OT is used as input
    for this operation.
Procedure
    Within payroll, wage types are assigned to a fixed WPBP period by
    infotype 0014 Recurring Payments/Deductions, for example. However, you
    may want to distribute this payment to all active WPBP periods, which is
    what would happen if the wage type were entered in basic pay. Therefore,
    various specifications exist for parameter S:
    o   If the specification is 'A', and if several active WPBP periods
        exist, the amount is simultaneously reduced on a calendar-day basis.
    o   If the specification is 'D', the wage type is distributed to all
        existing WPBP periods without the amount being reduced.
    o   If the specification is 'S', and if the validity period starts or
        ends during the period, the entry in table WPBP is split using this
        date. The wage type is stored in table OT for the corresponding WPBP
        period.
        This parameter is only allowed if processing was accessed using
       function P0014.
       In this case, infotype 0014 must be processed before absence
       valuation and function PARTT. Otherwise, rejections occur during
       payroll processing.
   o   Specification 'X' is the combination of 'A' and 'S'.
       This parameter is only allowed if processing was accessed using
       function P0014.
   o   If the specification is 'W', and if the validity period starts or
       ends during the period, the entry in table WPBP is split using this
       date (as with option 'S'). Unlike 'S', the wage type is not stored
       in table OT.
       This parameter is only allowed if processing was accessed using
       function P0014.
   o   If the specification is ' ', the wage type is stored in table OT for
       each WPBP period in which the validity interval fits.
       This parameter is only allowed if processing was accessed using
       functions P0014 or P0015.
   If the WPBP split is set for a wage type, the wage type is stored
   without changes in table OT. If you specify a different wage type name
   in the second parameter, the wage type is stored with this name in table
   OT. Before you execute operation WPBPC, you may therefore need to delete
   the split using operation ELIMI.
   If a country-specific split (C1, C2, or C3 split) is set, the operation
   interprets it as an error. The employee in question is rejected by
   payroll. All other splits are transferred as they are.
Output
    The processed wage type, or the wage type specified in the operation
    call, is written to table OT (output table) with the appropriate split
    indicator and reduced amount as operation output for each WPBP period.
    Parameter specification 'W' is the only exception.
Syntax
    OOOOOSVVVV
    OOOOO       WPBPC       Operation name
    S
                blank       distribute to all WPBP periods
                S           split and distribute WPBP
                W           split but do not distribute WPBP
                A           distribute to active WPBP periods
                            with calendar-day reductions
                D           distribute to all existing
                            WPBP periods
                X           combination of 'S' and 'A'
    VVVV                    Results wage type
                blank       input wage type = results wage type
                wage        wage type name of input wage type is replaced
                 type       by wage type name of results wage
                 name       type
    Wage type before operation:
Example
    M100        02          3000
    WPBP split
    01 June 01 - June 20 active
    02 June 21 - June 30 active
    VVVV                    Results wage type
                blank       input wage type = results wage type
                wage        wage type name of input wage type is replaced
                 type       by wage type name of results wage
                 name       type
    Wage type before operation:
Example
    M100        02          3000
    WPBP split
    01 June 01 - June 20 active
    02 June 21 - June 30 active
    Wage type before operation:
    WType       WPBP        Amount
    M100        00          3000.-
    M200        02          2000.-
    Operation:   WPBPCA
    Wage type after operation:
    WType       WPBP        Amount
    M100        01          2000.-
    M100        02          1000.-
    M200        02          2000.-
    Operation:   WPBPC
    Wage type after operation:
    WType       WPBP        Amount
    M100        01          3000.-
    M100        02          3000.-
    M200        02          2000.-
Regards
Team Member.

Split valuation 'Valuation type' Assignment problem for SFG.

Hi MM Gurus,
A Semi-finished product that is applicable for Split Valuation with valuation category 'A (Yearly batch)' is created under Valuation Class 7900 (defined for SFG). When we are trying to extend that material for Valuation type say '2006-2007' through Transaction code MM01, system is not allowing to take Valuation class '7900' but it is allowing Valuation classes only for FG say '7920' and others.
We are not getting whats the exact reason behind that. If anybody faced the same problem please help out.
Thanks & Regards,
Abu Arbab

execute transaction OMWC.
click global types and check which ARef is assigned to your '2006-2007' valuation type, is it 7900 or 7920?
click local definitions, select your plant, click local types and check what ARef is assigned there.is it 7900 or 7920?

Non valuated movement type

The finished products that are sold are received/returned back from the customer.
These returned goods from customers are basically for rechecking, testing, callibration.
once these activities are done, they are send back to the customer. These all are done free of cost.
It is not sales returned.
Since these goods still belongs to the customer so cannot be valuated in our plant.
We want to keep this goods in the plant with zero value.
how this can be done? can we create a movement type that is non valuated.
Currently when we in this material, system understands it as a sale return and show us the price.

In movement type 511, the transaction/event ket PRD and account modifier PRA is assigned. It means that the value flows to account assignment object.
I tried with mvt 511, by giving customer number, the system is asking for account determination of PRD and PRA for the valuation class, that I understand this since I have not done the OBYC for PRD of PRA.
Before doing these settings for PRD in OBYC for PRA, I want your opinion on this.
if i do these settings the value will effect my existing stock and some value will go into PRD account.
More over if you go to OMJJ, settings of movment type, in account grouping node you will find that for 511 mvt, the first line is having value update tick and the second row is having valuation and qty update tick in both the check boxes.
I think all movement types leads to either update of stock account or a consumption a.ccount.
451 is for blocked stock, this is not going to help us.
But this movement type can lead to PRD ( price difference)
please comment

F-05 - Post Foreign Currency Valuation - IDOC TYPE

Anyone know how to configure a FIDCC1 to post a foreign currency valuation (transaction F-05)?
Thanks

I think we can't use BAPI for this transaction...Goto shdb and create a recording for F-05 and write a BDC for this recording and upload data from file and use the BDC to post data.

Sales order MTO for non-valuated Material type

Hi Friends,
I need to create MTO sales order for non-valued material type, and at the time of save, I am getting an error that, Material "JOBFINISH" cannot be costed
Message no. CK113.
Diagnosis
In accordance with material type UNBW for material JOBFINISH, the material is not relevant for costing.
System Response
Material JOBFINISH is not costed.
Procedure
1. Check the master data for material JOBFINISH.
Display material master record
2. If you have authorization for Customizing, check whether the material type is correctly set for this material. A material can only be costed if the Costing indicator in the material type is set.
Can you please suggest to handel this kind of error.
Rgds, Krishan Raheja.

First in MM03 ,check the Material Type & Costing View whether any cost is there.If it is not there ,then ask FI consultant to provide the Costing.
Then Go to OMS2 > Select Details against your Material Type > Can activate the Costing View ( if it is not there in MM03).
Best Regards,
Ankur

Receipt of a non-valuated material (type UNBW)

What is the movement type that would typically be used to do a miscellaneous receipt (without a PO) for a UNBW part? I would have used 501 but in our company we have that set to be used specifically for a separate process (long story...the process won't be changed.) Anyway, are there any other movement types that I can try?

521 - receipt without Order
Or may be copy 501 to new movement type 991: Tcode - OMJJ
Hope this helps-

PO with multiple account assignments - non valuated / valuated GR

Hi Experts,
If I create a PO for goods with multiple account assignments the GR will not be valuated, but if I do the same for a service PO the GR will be valuated.
What is the reason for this?
Thanks in advance,
Francisco Melo

Hi,
There is more of a qualitative response to the issue, rather than quantitative, If you go through SAP Note 204252 for GR of material it says that: "We have not implemented this function since users who post goods receipts would have to determine the distribution to individual account assignment items during partial deliveries. Generally, users cannot or should not determine this.
An automatic distribution also causes problems and is also not implemented due to technical reasons".
Means basically here a stores guy is doing GR and he maynot be competent enough to decide on the Account assignment front.
However in general the service entry sheet is filled by departments who have got the work done, and are aware of the account assignment for that work.
Hope this is helpful for you.
Regards
Chandra Shekhar

Bringing the actual cost (splitting among activity type) using 0co_om_cca data sources

Hi expert,
I'm using the data source 0co_om_cca_9 to bring the cost center data but the actual data is not being split per fixed and variable cost.
I've checked with CO team and the process to split the cost happens in the end of the month and it record the data with value type '3' in the covp table but the standard data source 0co_om_cca_9 just get the data with value type '4'.
Does someone know a standard datasource to bring the data with value type 3 from covp?
Thank you.
César Sevilha.

Hi César,
Please check if DataSource 0CO_OM_CCA_2 can deliver what you need.
Best regards,
Sander

WM: TO creation splitting per storage type

Hi all.
I would like to know how to split a GR in different TO and the different possibilities:
per storage type
one item (in material document)=one TO per item
Is it customizing? Does a user exit exist?
Many thanks in advance!!!!

In config. see all the options under:
Logistics Execution \ WM \ Activities \ Transfers \ Processing perf. data \ TO split
Sort and split TO items
You can assign a performance data profile to a transfer order with the movement type key, source storage type key or the destination storage type key. Since the storage types are on the item level rather than header level in the transfer order, an implicit split is executed for transfer orders with performance data profiles, which makes the performance data profile valid for all items.
An explicit split may be preferable for organizational reasons. Some examples include executing a split according to picking areas or when a parameter barrier for volume, weight, or target time is reached. A suitable TO item sort is a prerequisite for a meaningful split.
Regards,
Nick

Payment Method split between two types (cash & credit)

I am looking for a way of splitting a customers payment between two methods in one sales order. For example, a customer purchases an item valued at $100. He wants to pay with $50 cash and put $50 on a credit card. Currently the payment method resides in the header of the sales order and only one can be selected. Is it possible to create a multi selection option, or to apply the payment method at the line item level?

Technically it should be possible to maintain a different payment term on the line item level in the sales documents. The field is stored in VBKD table and is also available at the line item level (although it's grayed out).
Such items would be split into 2 invoices though because it's not possible to have one invoice with two different payment terms.
Also if the payment method does not change the payment due date and other condition, then I wouldn't really bother at all. It's possible to post 2 partial payments against one invoice in FI, so why should SD side be even concerned about the methods? Unless, of course, there's something you're not telling...

DRQ - Split Business Partner Type 'Add' Authorisation into Supp and Cust

Hi,
Is this functionality expected at any point in the near future?
Kindest regards,
Stuart
Edited by: Stuart Folley on May 1, 2008 5:48 PM

Guy，i don't regard here is anybody wanna read so much code .For more constructive answers, you would distill core question from your program.

Split valuation conflict

Folks,
2 questions related to split valuation:
1) We've valuation level at company code and split valuation active. We have set valuation type A as a default in tcode OMWC. In the stock determination rule, we've set that valuation type A and B can be assigned to a delivery. Now, the default valuation type A will prevent B from doing GR as the default in the PO is set to A. There is no possibility to make different settings in OMWC for external PO's and internal PO's. How can we arrange that a valuation type different from the default can be processed during GR. How can we handle multiple valuation types in 1 PO automatically (so not splitting the different types into different PO-items)?
2) When entering a specific batch with a different valuation type then the default A, system gives a hard error. Is it possible to have the valuation type of the batch overrule the default?

Do you have the material master accounting view s created for A and B valuation type?
What is the exact message and its message number?

Batch and Split valuation

Hi Friends,
I need bach anagement for all our raw materials and some materials need split valuation ( imported, domestic) based on orizin. When I assign both, valuation type only selectable . But I want the batch control for FIFO. can anybody suggest, how to maintain both options?
Regards,

1. split valuation
Valuation type
http://www.sap123.com/showthread.php?t=29
2.batch
2-a - active batch mgmt in mat master
2-b- do batch config steps.
3. FIFO.
If Batch Management is active for the materials then use following process;
First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
Assign this characteristics in CL02 in your Batch Class.
CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
Now do batch determination in MIGO.

Split valuation, valuation type

Similar Messages

Maybe you are looking for