Split view changed

I am creating a photo book, and I was using split view to place my photos into the photo book. Originally, the photos I was placing into the book were on the bottom so I could scroll across and place pictures in photo book where I wanted them (photo book was above).
Then something changed with the split view, now the photos are on the left hand side and I scroll down to place photos into the photo book on right side of screen.
This view is extremely fustrating and I can not figure out how to get split view back to the original format. The other issue is that with this "newly" formated split view I can not use the pictures more than once, with the "old" split view I could use a individual photo more than once to use for background etc...
If someone knows how to change the split view format please, help. I do not understand how this changed and I can not get it back.
Thanks!
Happy Aperture User!

Aperture is large, complex, and powerful. Before using it to store or manipulate any valuable data files, you should read and understand at least the first seven chapters of the User Manual. The UI and the general workflow are laid out pretty well. Spend some time with it, and ask here for clarification of things that don't make sense to you.
(Added:)
The chapter on using the Book Album to create Books is here.
Message was edited by: Kirby Krieger

Similar Messages

CS3 Split View Change

How do I swap the code & design views in CS3 so that the
code view is on the bottom? The online help file points to submenus
that do not seem to be there.
Thx, -Barry

That just changes focus from one to the other... doesn't
actually switch the
windows.
To the OP: see if there's anything under the
WINDOWS>WORKSPACE section
that may suit your work flow.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"DC_Eric" <[email protected]> wrote in message
news:f41aik$gon$[email protected]..
> Don't have an answer to your questions; however I don't
even use the
> buttons. I just hit ctrl ` at the same time and it will
switch views.

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

Split view for before and after changes?

One feature I used to use a lot on Lightroom as where it would show a split view showing the image before and after changes (adjustments). I cannot find how to do this in Aperture - is it possible, what is this feature called?
(and before any smart person tells me to look in help, I'm tired of responses like that. I've looked and didn't find, and that's why I'm asking here. I've tried Compare, and Before and After Changes etc.)

Unfortunately, no, there is no ability to do the split view like Lightroom has. It's a nice feature.
The closest you can do is to flip back and forth between two versions. Because when you view the master in aperture it shows the original file without crops and straightening, I suggest that once you crop and straighten, you then create a new version and work on that (this is as close as you can get to LR's "snapshot" functionality). You can then flip back and forth between the two versions to see the changes... but you can't see them side by side with a split.

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

Dear Sara,
I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
Yours Sincerely,Liam Anthony Dalton BA, FA

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

My small split-view file manager

Hello.
I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
You can get the browser from here http://github.com/napsy/gsfm
space - select/unselect
F5 - copy selection
F4 - rename selection
F3 - new directory
delete - delete selection
tab - change view
There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
Sere is a screenshot: http://napotnik.info/images/gsfm.png

It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

Custom Split views don't work like the use to pre- Project 2010

Hi
Either we've lost some functionality along the way, or there must be another way of doing the following...
Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
split view I selected.
In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work"). At least that has been my experience...
does anyone have a solution apart from needing to write a VBA event handler?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
1. Open the project file on which this change should be applied.
2. In the View ribbon, click Macro command and select Visual Basic
3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
4. Paste below lines in the Project_Open event handler. Save the code.
Private Sub Project_Open(ByVal pj As Project)
    ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
    WindowActivate TopPane:=False
    ViewShowPredecessorsSuccessors
End Sub
5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
Sai PMP, PMI-SP, MCTS Project, MVP Project

Horizontal scroll not working in aperture split view

I had recently upgraded to mountain lion and the newest aperture, but I noticed a problem with horizontal scrolling in aperture split view. I am currently using a magic mouse, and it scrolls just fine within other applications except in aperture split view. (it doesn't go to the next picture when I gesture left and right) if I do it many times, it will change to the next picture but then stops scrolling again. I had tried to use a trackpad and it is better but I have to do it slowly and occationally it just doesn't work. It only happens only in Aperture and not in safari or other applications. Does anyone know the solution to this problem? Any little help is greatly apprecitated

The recent Aperture update disabled the "Scroll to navigate photos in the Viewer" option.
You may need to reenable it in the Aperture general preferences.
Regards
Léonie

Previews not displaying in split view in Aperture

Recently Aperture has stopped displaying previews for a number of photos (but strangely not all) when in split view. If I switch to browser view the previews are all there, and if I then return to split view they are back to being displayed. But if I move to another project and then return to the first they are gone again. I have repaired the Aperture database with no change, but not yet rebuilt it. This change in behaviour was not concurrent with an Aperture update. However there have been lots of updates affecting 10.8.2 since the most recent version of Aperture. Any thoughts?
Thanks,
Bob
Aperture 3.4.3
OS X 10.8.2
Late 2009 MacBook

Here is an image of Aperture without Viewer

How can I view .inc files in split view on DW

I'm trying to view my INC files in split view using DW CC 2014.1.
I've managed this on older versions of DW by changing the extensions.txt and MMDocumentTypes.xml file.
However, that isn't working for me now.
Am I missing something for DW 2014.1?
Thanks,
Liz

I've managed this on older versions of DW by changing the extensions.txt and MMDocumentTypes.xml file.
Works for me.
Are you sure that you targeted the files in the correct directory as in Dreamweaver CC 2014.1?

DW9 (CS3) split view not work with ASP files?

I just installed and ran DW CS3 (ver 9.0 bulid 3481) -- I use
"coder" view for the screen layout. I like the split-view style
since I code inline HTML with my ASP and ASPX code. However, the
new version has the split-screen view button grayed out. How do I
enable split view when I edit files that are not just ending in
"htm" or "html" extensions? If the Adobe programmers made an
ASSumption then they need to issue a patch and remove it pronto. I
do not want someone else making decisions on how I do my work...I
get enough of that from Microsoft already, I do not need it from my
tools also. Please forward this to the developers if there is no
way to change my preferences, otherwise please tell me how to edit
a config file or hex-edit the executable to get this funtionality
back. TIA!

I still can't figure out why the split view or design view is
grayed out and not accessible when editing files with an .asp or
.aspx extension and it is driving me crazy! I called the support
line and got someone in India who didn't understand my problem. 30
minutes later I finally got her to agree to transfer me to
secondary support but they were busy and she promised me they would
call the next day. That was over a week ago. I didn't even get a
voicemail, even though I stayed by my phone the whole day. I see
that support for DW under Adobe is no better than it was under
Macromedia...how sad. Microsoft Expression Web is looking better
and better every day....... :(

Aperture Split View Misbehaving

The vertical photos in the split view bar have all switched from being displayed vertically/normally to being rotated and showing "squashed". They only do it with photos imported from my Sony DSV-HX5V, not iPhone or other cameras. Any ideas?

A few simple things first:
- Does the problem persist after closing and re-opening Aperture?
- Are they distorted in Grid view?
- In Split view, does changing from Filmstrip to Grid (still in Split view) correct the distortion? Does changing the size of the Previews in the Split view grid (use the slider) correct them?
- What happens when you select one Preview, and select "Update Preview" from the context-sensitive menu?

Aperture Split View Problem

The vertical photos in the split view bar at the bottom have all switched from being displayed normally to being rotated and showing squashed and distorted.
I have tried to close and re-open Aperture, and I have also restarted the computer. The pictures are distorted whther they are in the Grid view or Filmstrip. I also tried to "Update Preview", but it tells me that it is up to date.The horizontal/landscape pictures are showing fine, the problem is only with the vertical/portrait pictures in the Split view.

Select all the ones in one Project and run "Photos→Generate Preview". Does that work?
"Update Preview" changes to "Generate Preview" when "{Alt}" is pressed.

DW code view custom highlight color from design view (split view)

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
Thanks!

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
DW Code View uses the Selection colors defined for your Operating System.
If you don't know how to change that, which OS and version are you using?
HTH,
Randy

Split view changed

Similar Messages

Maybe you are looking for